summaryrefslogtreecommitdiffstats
path: root/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2020-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-31cfg80211: support bigger kek/kck key lengthNathan Errera1-4/+19
With some newer AKMs, the KCK and KEK are bigger, so allow that if the driver advertises support for it. In addition, add a new attribute for the AKM so we can use it for offloaded rekeying. Signed-off-by: Nathan Errera <nathan.errera@intel.com> [reword commit message] Link: https://lore.kernel.org/r/20200528212237.5eb58b00a5d1.I61b09d77c4f382e8d58a05dcca78096e99a6bc15@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: require HE capabilities for 6 GHz bandJohannes Berg1-0/+10
On 6 GHz band, HE capabilities must be available for all of the interface types, otherwise we shouldn't use 6 GHz. Check this. Link: https://lore.kernel.org/r/20200528213443.5881cb3c8c4a.I583b54172f91f98d44af64a16c5826fe458cbb27@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: reject HT/VHT capabilities on 6 GHz bandJohannes Berg1-1/+6
On the 6 GHz band, HE should be used, but without any direct HT/VHT capabilities, instead the HE 6 GHz band capabilities will capture the relevant information. Reject HT/VHT capabilities here. Link: https://lore.kernel.org/r/20200528213443.bfe89c35459a.Ibba5e066fa0087fd49d13cfee89d196ea0c68ae2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: treat 6 GHz channels as valid regardless of capabilityJohannes Berg1-7/+15
If a 6 GHz channel exists, then we can probably safely assume that the device actually supports it, and then it should support most bandwidths. This will probably need to be extended to check the interface type and then dig into the HE capabilities for that though, to have the correct bandwidth check. Link: https://lore.kernel.org/r/20200528213443.d4864ef52e92.I82f09b2b14a56413ce20376d09967fe954a033eb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: add and expose HE 6 GHz band capabilitiesJohannes Berg1-1/+8
These capabilities cover what would otherwise be transported in HT/VHT capabilities, but only a subset thereof that is actually needed on 6 GHz with HE already present. Expose the capabilities to userspace, drivers are expected to set them as using the 6 GHz band (currently) requires HE capability. Link: https://lore.kernel.org/r/20200528213443.244cd5cb9db8.Icd8c773277a88c837e7e3af1d4d1013cc3b66543@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: handle 6 GHz capability of new stationRajkumar Manoharan1-1/+17
Handle 6 GHz HE capability while adding new station. It will be used later in mac80211 station processing. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-2-git-send-email-rmanohar@codeaurora.org [handle nl80211_set_station, require WME, remove NL80211_HE_6GHZ_CAPABILITY_LEN] Link: https://lore.kernel.org/r/20200528213443.b6b711fd4312.Ic9b97d57b6c4f2b28d4b2d23d2849d8bc20bd8cc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31nl80211: really allow client-only BIGTK supportJohannes Berg2-3/+8
My previous commit here was wrong, it didn't check the new flag in two necessary places, so things didn't work. Fix that. Fixes: 155d7c733807 ("nl80211: allow client-only BIGTK support") Link: https://lore.kernel.org/r/20200528213443.993f108e96ca.I0086ae42d672379380d04ac5effb2f3d5135731b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: adapt to new channelization of the 6GHz bandArend Van Spriel1-2/+4
The 6GHz band does not have regulatory approval yet, but things are moving forward. However, that has led to a change in the channelization of the 6GHz band which has been accepted in the 11ax specification. It also fixes a missing MHZ_TO_KHZ() macro for 6GHz channels while at it. This change is primarily thrown in to discuss how to deal with it. I noticed ath11k adding 6G support with old channelization and ditto for iw. It probably involves changes in hostapd as well. Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Cc: Jouni Malinen <jouni@w1.fi> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/edf07cdd-ad15-4012-3afd-d8b961a80b69@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: fix 6 GHz frequencies to kHzJohannes Berg1-1/+1
The updates to change to kHz frequencies and the 6 GHz additions evidently overlapped (or rather, I didn't see it when applying the latter), so the 6 GHz is broken. Fix this. Fixes: 934f4c7dd3a5 ("cfg80211: express channels with a KHz component") Link: https://lore.kernel.org/r/20200529140425.1bf824f6911b.I4a1174916b8f5965af4366999eb9ffc7a0347470@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: fix CFG82011_CRDA_SUPPORT still mentioning internal regdbPatrick Steinhardt1-2/+2
Back with commit c8c240e284b3 (cfg80211: reg: remove support for built-in regdb, 2015-10-15), support for using CFG80211_INTERNAL_REGDB was removed in favor of loading the regulatory database as firmware file. The documentation of CFG80211_CRDA_SUPPORT was not adjusted, though, which is why it still mentions mentions the old way of loading via the internal regulatory database. Remove it so that the kernel option only mentions using the firmware file. Signed-off-by: Patrick Steinhardt <ps@pks.im> Link: https://lore.kernel.org/r/c56e60207fbd0512029de8c6276ee00f73491924.1589732954.git.ps@pks.im Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: Add support to configure TID specific Tx rate configurationTamizh Chelvam1-14/+42
This patch adds support to configure per TID Tx Rate configuration through NL80211_TID_CONFIG_ATTR_TX_RATE* attributes. And it uses nl80211_parse_tx_bitrate_mask api to validate the Tx rate mask. Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1589357504-10175-1-git-send-email-tamizhr@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: add ability to report TX status for control port TXMarkus Theil3-11/+56
This adds the necessary capabilities in nl80211 to allow drivers to assign a cookie to control port TX frames (returned via extack in the netlink ACK message of the command) and then later report the frame's status. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200508144202.7678-2-markus.theil@tu-ilmenau.de [use extack cookie instead of explicit message, recombine patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507183909.GA12993@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: support scan frequencies in KHzThomas Pedersen1-12/+39
If the driver advertises NL80211_EXT_FEATURE_SCAN_FREQ_KHZ userspace can omit NL80211_ATTR_SCAN_FREQUENCIES in favor of an NL80211_ATTR_SCAN_FREQ_KHZ. To get scan results in KHz userspace must also set the NL80211_SCAN_FLAG_FREQ_KHZ. This lets nl80211 remain compatible with older userspaces while not requring and sending redundant (and potentially incorrect) scan frequency sets. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-4-thomas@adapt-ip.com [use just nla_nest_start() (not _noflag) for NL80211_ATTR_SCAN_FREQ_KHZ] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: add KHz frequency offset for most wifi commandsThomas Pedersen1-20/+58
cfg80211 recently gained the ability to understand a frequency offset component in KHz. Expose this in nl80211 through the new attributes NL80211_ATTR_WIPHY_FREQ_OFFSET, NL80211_FREQUENCY_ATTR_OFFSET, NL80211_ATTR_CENTER_FREQ1_OFFSET, and NL80211_BSS_FREQUENCY_OFFSET. These add support to send and receive a KHz offset component with the following NL80211 commands: - NL80211_CMD_FRAME - NL80211_CMD_GET_SCAN - NL80211_CMD_AUTHENTICATE - NL80211_CMD_ASSOCIATE - NL80211_CMD_CONNECT Along with any other command which takes a chandef, ie: - NL80211_CMD_SET_CHANNEL - NL80211_CMD_SET_WIPHY - NL80211_CMD_START_AP - NL80211_CMD_RADAR_DETECT - NL80211_CMD_NOTIFY_RADAR - NL80211_CMD_CHANNEL_SWITCH - NL80211_JOIN_IBSS - NL80211_CMD_REMAIN_ON_CHANNEL - NL80211_CMD_JOIN_OCB - NL80211_CMD_JOIN_MESH - NL80211_CMD_TDLS_CHANNEL_SWITCH If the driver advertises a band containing channels with frequency offset, it must also verify support for frequency offset channels in its cfg80211 ops, or return an error. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: add KHz variants of frame RX APIThomas Pedersen3-13/+13
Drivers may wish to report the RX frequency in units of KHz. Provide cfg80211_rx_mgmt_khz() and wrap it with cfg80211_rx_mgmt() so exisiting drivers which can't report KHz anyway don't need to change. Add a similar wrapper for cfg80211_report_obss_beacon() so the frequency units stay somewhat consistent. This doesn't actually change the nl80211 API yet. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-2-thomas@adapt-ip.com [fix mac80211 calling the non-khz version of obss beacon report, drop trace point name changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: simplify peer specific TID configurationSergey Matyukevich1-4/+1
Current rule for applying TID configuration for specific peer looks overly complicated. No need to reject new TID configuration when override flag is specified. Another call with the same TID configuration, but without override flag, allows to apply new configuration anyway. Use the same approach as for the 'all peers' case: if override flag is specified, then reset existing TID configuration and immediately apply a new one. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-5-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: add support for TID specific AMSDU configurationSergey Matyukevich1-0/+8
This patch adds support to control per TID MSDU aggregation using the NL80211_TID_CONFIG_ATTR_AMSDU_CTRL attribute. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-4-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-26Merge tag 'mac80211-next-for-net-next-2020-04-25' of ↵David S. Miller11-160/+236
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== One batch of changes, containing: * hwsim improvements from Jouni and myself, to be able to test more scenarios easily * some more HE (802.11ax) support * some initial S1G (sub 1 GHz) work for fractional MHz channels * some (action) frame registration updates to help DPP support * along with other various improvements/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25cfg80211: fix debugfs rename crashJohannes Berg1-1/+1
Removing the "if (IS_ERR(dir)) dir = NULL;" check only works if we adjust the remaining code to not rely on it being NULL. Check IS_ERR_OR_NULL() before attempting to dereference it. I'm not actually entirely sure this fixes the syzbot crash as the kernel config indicates that they do have DEBUG_FS in the kernel, but this is what I found when looking there. Cc: stable@vger.kernel.org Fixes: d82574a8e5a4 ("cfg80211: no need to check return value of debugfs_create functions") Reported-by: syzbot+fd5332e429401bf42d18@syzkaller.appspotmail.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200525113816.fc4da3ec3d4b.Ica63a110679819eaa9fb3bc1b7437d96b1fd187d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-30netlink: remove NLA_EXACT_LEN_WARNJohannes Berg1-63/+18
Use a validation type instead, so we can later expose the NLA_* values to userspace for policy descriptions. Some transformations were done with this spatch: @@ identifier p; expression X, L, A; @@ struct nla_policy p[X] = { [A] = -{ .type = NLA_EXACT_LEN_WARN, .len = L }, +NLA_POLICY_EXACT_LEN_WARN(L), ... }; Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30nl80211: link recursive netlink nested policyJohannes Berg3-10/+5
Now that we have limited recursive policy validation to avoid stack overflows, change nl80211 to actually link the nested policy (linking back to itself eventually), which allows some code cleanups. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30docs: networking: convert radiotap-headers.txt to ReSTMauro Carvalho Chehab1-1/+1
- add SPDX header; - adjust title markup; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-24cfg80211: reject channels/chandefs with KHz offset >= 1000Johannes Berg2-0/+6
This should be covered by the next MHz, make sure that the numbers are always normalized. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200424120103.12b91ecf75f9.I4bf499d58404283bbfacb517d614a816763bccf2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: express channels with a KHz componentThomas Pedersen5-69/+96
Some bands (S1G) define channels centered on a non-integer MHz. Give ieee80211_channel and cfg80211_chan_def a freq_offset component where the final frequency can be expressed as: MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset; Also provide some helper functions to do the frequency conversion and test for equality. Retain the existing interface to frequency and channel conversion helpers, and expose new ones which handle frequencies in units of KHz. Some internal functions (net/wireless/chan.c) pass around a frequency value. Convert these to units of KHz. mesh, ibss, wext, etc. are currently ignored. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200402011810.22947-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: Parse HE membership selectorIlan Peer1-0/+2
This extends the support for drivers that rebuilds IEs in the FW (same as with HT/VHT). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.20feaabfb484.I886252639604c8e3e84b8ef97962f1b0e4beec81@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: implement Operating Mode Notification extended NSS supportJohannes Berg1-12/+14
Somehow we missed this for a long time, but similar to the extended NSS support in VHT capabilities, we need to have this in Operating Mode notification. Implement it by * parsing the 160/80+80 bit there and setting the bandwidth appropriately * having callers of ieee80211_get_vht_max_nss() pass in the current max NSS value as received in the operating mode notification in order to modify it appropriately depending on the extended NSS bits. This updates all drivers that use it, i.e. only iwlwifi/mvm. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.098483728cfa.I4e8c25d3288441759c2793247197229f0696a37d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24nl80211: allow client-only BIGTK supportJohannes Berg1-4/+15
The current NL80211_EXT_FEATURE_BEACON_PROTECTION feature flag requires both AP and client support, add a new one called NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT that enables only support in client (and P2P-client) modes. Link: https://lore.kernel.org/r/20200420140559.6ba704053a5a.Ifeb869fb0b48e52fe0cb9c15572b93ac8a924f8d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: support multicast RX registrationJohannes Berg3-9/+42
For DPP, there's a need to receive multicast action frames, but many drivers need a special filter configuration for this. Support announcing from userspace in the management registration that multicast RX is required, with an extended feature flag if the driver handles this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200417124013.c46238801048.Ib041d437ce0bff28a0c6d5dc915f68f1d8591002@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: change internal management frame registration APIJohannes Berg5-66/+50
Almost all drivers below cfg80211 get the API wrong (except for cfg80211) and are unable to cope with multiple registrations for the same frame type, which is valid due to the match filter. This seems to indicate the API is wrong, and we should maintain the full information in cfg80211 instead of the drivers. Change the API to no longer inform the driver about individual registrations and unregistrations, but rather every time about the entire state of the entire wiphy and single wdev, whenever it may have changed. This also simplifies the code in cfg80211 as it no longer has to track exactly what was unregistered and can free things immediately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200417124300.f47f3828afc8.I7f81ef59c2c5a340d7075fb3c6d0e08e8aeffe07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: Unprotected Beacon frame RX indicationJouni Malinen2-2/+13
Extend cfg80211_rx_unprot_mlme_mgmt() to cover indication of unprotected Beacon frames in addition to the previously used Deauthentication and Disassociation frames. The Beacon frame case is quite similar, but has couple of exceptions: this is used both with fully unprotected and also incorrectly protected frames and there is a rate limit on the events to avoid unnecessary flooding netlink events in case something goes wrong. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200401142548.6990-1-jouni@codeaurora.org [add missing kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-14nl80211: fix NL80211_ATTR_FTM_RESPONDER policyJohannes Berg1-4/+2
The nested policy here should be established using the NLA_POLICY_NESTED() macro so the length is properly filled in. Cc: stable@vger.kernel.org Fixes: 81e54d08d9d8 ("cfg80211: support FTM responder configuration/statistics") Link: https://lore.kernel.org/r/20200412004029.9d0722bb56c8.Ie690bfcc4a1a61ff8d8ca7e475d59fcaa52fb2da@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+6
Minor comment conflict in mac80211. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26cfg80211: Do not warn on same channel at the end of CSAIlan Peer1-1/+5
When cfg80211_update_assoc_bss_entry() is called, there is a verification that the BSS channel actually changed. As some APs use CSA also for bandwidth changes, this would result with a kernel warning. Fix this by removing the WARN_ON(). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.96316ada0e8d.I6710376b1b4257e5f4712fc7ab16e2b638d512aa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada1-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25nl80211: fix NL80211_ATTR_CHANNEL_WIDTH attribute typeJohannes Berg1-1/+1
The new opmode notification used this attribute with a u8, when it's documented as a u32 and indeed used in userspace as such, it just happens to work on little-endian systems since userspace isn't doing any strict size validation, and the u8 goes into the lower byte. Fix this. Cc: stable@vger.kernel.org Fixes: 466b9936bf93 ("cfg80211: Add support to notify station's opmode change to userspace") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200325090531.be124f0a11c7.Iedbf4e197a85471ebd729b186d5365c0343bf7a8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20nl80211: clarify code in nl80211_del_station()Johannes Berg1-8/+14
The long if chain of interface types is hard to read, especially now with the additional condition after it. Use a switch statement to clarify this code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200320113834.2c51b9e8e341.I3fa5dc3f7d3cb1dbbd77191d764586f7da993f3f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20cfg80211: Configure PMK lifetime and reauth threshold for PMKSA entriesVeerendranath Jakkam1-0/+11
Drivers that trigger roaming need to know the lifetime of the configured PMKSA for deciding whether to trigger the full or PMKSA cache based authentication. The configured PMKSA is invalid after the PMK lifetime has expired and must not be used after that and the STA needs to disassociate if the PMK expires. Hence the STA is expected to refresh the PMK with a full authentication before this happens (e.g., when reassociating to a new BSS the next time or by performing EAPOL reauthentication depending on the AKM) to avoid unnecessary disconnection. The PMK reauthentication threshold is the percentage of the PMK lifetime value and indicates to the driver to trigger a full authentication roam (without PMKSA caching) after the reauthentication threshold time, but before the PMK timer has expired. Authentication methods like SAE need to be able to generate a new PMKSA entry without having to force a disconnection after this threshold timeout. If no roaming occurs between the reauthentication threshold time and PMK lifetime expiration, disassociation is still forced. The new attributes for providing these values correspond to the dot11 MIB variables dot11RSNAConfigPMKLifetime and dot11RSNAConfigPMKReauthThreshold. This type of functionality is already available in cases where user space component is in control of roaming. This commit extends that same capability into cases where parts or all of this functionality is offloaded to the driver. Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200312235903.18462-1-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20cfg80211: Add support for userspace to reset stations in IBSS modeNicolas Cavallari1-1/+6
Sometimes, userspace is able to detect that a peer silently lost its state (like, if the peer reboots). wpa_supplicant does this for IBSS-RSN by registering for auth/deauth frames, but when it detects this, it is only able to remove the encryption keys of the peer and close its port. However, the kernel also hold other state about the station, such as BA sessions, probe response parameters and the like. They also need to be resetted correctly. This patch adds the NL80211_EXT_FEATURE_DEL_IBSS_STA feature flag indicating the driver accepts deleting stations in IBSS mode, which should send a deauth and reset the state of the station, just like in mesh point mode. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://lore.kernel.org/r/20200305135754.12094-1-cavallar@lri.fr [preserve -EINVAL return] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20nl80211: pass HE operation element to the driverShaul Triebitz1-1/+4
Pass the AP's HE operation element to the driver. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-18-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20nl80211/cfg80211: add support for non EDCA based ranging measurementAvraham Stern3-0/+46
Add support for requesting that the ranging measurement will use the trigger-based / non trigger-based flow instead of the EDCA based flow. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-2-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20mac80211: handle no-preauth flag for control portMarkus Theil1-0/+3
This patch adds support for disabling pre-auth rx over the nl80211 control port for mac80211. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200312091055.54257-3-markus.theil@tu-ilmenau.de [fix indentation slightly, squash feature enablement] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20nl80211: add no pre-auth attribute and ext. feature flag for ctrl. portMarkus Theil1-0/+1
If the nl80211 control port is used before this patch, pre-auth frames (0x88c7) are send to userspace uncoditionally. While this enables userspace to only use nl80211 on the station side, it is not always useful for APs. Furthermore, pre-auth frames are ordinary data frames and not related to the control port. Therefore it should for example be possible for pre-auth frames to be bridged onto a wired network on AP side without touching userspace. For backwards compatibility to code already using pre-auth over nl80211, this patch adds a feature flag to disable this behavior, while it remains enabled by default. An additional ext. feature flag is added to detect this from userspace. Thanks to Jouni for pointing out, that pre-auth frames should be handled as ordinary data frames. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200312091055.54257-2-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+5
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11nl80211: add missing attribute validation for channel switchJakub Kicinski1-0/+1
Add missing attribute validation for NL80211_ATTR_OPER_CLASS to the netlink policy. Fixes: 1057d35ede5d ("cfg80211: introduce TDLS channel switch commands") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-4-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for beacon report scanningJakub Kicinski1-0/+2
Add missing attribute validation for beacon report scanning to the netlink policy. Fixes: 1d76250bd34a ("nl80211: support beacon report scanning") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-3-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for critical protocol indicationJakub Kicinski1-0/+2
Add missing attribute validation for critical protocol fields to the netlink policy. Fixes: 5de17984898c ("cfg80211: introduce critical protocol indication from user-space") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-2-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-3/+4
The mptcp conflict was overlapping additions. The SMC conflict was an additional and removal happening at the same time. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 01:31:23 +0000