summaryrefslogtreecommitdiffstats
path: root/net/wireless/nl80211.c
AgeCommit message (Collapse)AuthorFilesLines
2018-10-02cfg80211: unify sending NL80211_CMD_NEW_INTERFACEJohannes Berg1-9/+0
There isn't really any need for us to be sending this from two different places - move cfg80211_init_wdev() later and send the notification from there, removing it from the non- netdev case. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02nl80211: add error messages to nl80211_parse_chandef()Johannes Berg1-22/+40
Add some error messages to nl80211_parse_chandef() to make failures here - especially with disabled channels - easier to diagnose. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: move cookie_counter out of wiphyJohannes Berg1-2/+2
There's no reason for drivers to be able to access the cfg80211 internal cookie counter; move it out of the wiphy into the rdev structure. While at it, also make it never assign 0 as a cookie (we consider that invalid in some places), and warn if we manage to do that for some reason (wrapping is not likely to happen with a u64.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02nl80211: remove nl80211_prepare_wdev_dump() skb argumentJohannes Berg1-8/+7
nl80211_prepare_wdev_dump() is using the output skb to look up the network namespace, but this isn't really necessary, it can just as well use the input skb which is available as cb->skb, the sk is the same anyway. Therefore, remove the redundant argument. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: support FTM responder configuration/statisticsPradeep Kumar Chitrapu1-5/+127
Allow userspace to enable fine timing measurement responder functionality with configurable lci/civic parameters in AP mode. This can be done at AP start or changing beacon parameters. A new EXT_FEATURE flag is introduced for drivers to advertise the capability. Also nl80211 API support for retrieving statistics is added. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> [remove unused cfg80211_ftm_responder_params, clarify docs, move validation into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02nl80211: Fix a GET_KEY reply attributeAndrew Zaborowski1-1/+1
Use the NL80211_KEY_IDX attribute inside the NL80211_ATTR_KEY in NL80211_CMD_GET_KEY responses to comply with nl80211_key_policy. This is unlikely to affect existing userspace. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: combine duplicate wdev init codeJohannes Berg1-9/+1
There's a bit of duplicated code to initialize a wdev, pull it out into a separate function to call from both places. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: remove redundant check of !scan_planColin Ian King1-2/+1
The check for !scan_plan is redunant as this has been checked in the proceeding statement and the code returns -ENOBUFS if it is true. Remove the redundant check. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-27nl80211: Fix possible Spectre-v1 for CQM RSSI thresholdsMasashi Honma1-5/+14
Use array_index_nospec() to sanitize i with respect to speculation. Note that the user doesn't control i directly, but can make it out of bounds by not finding a threshold in the array. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> [add note about user control, as explained by Masashi] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-26nl80211: Fix possible Spectre-v1 for NL80211_TXRATE_HTMasashi Honma1-0/+1
Use array_index_nospec() to sanitize ridx with respect to speculation. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-05cfg80211: add he_capabilities (ext) IE to AP settingsShaul Triebitz1-0/+3
Same as for HT and VHT. This helps the lower level to know whether the AP supports HE. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+8
2018-09-03Merge tag 'mac80211-for-davem-2018-09-03' of ↵David S. Miller1-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here are quite a large number of fixes, notably: * various A-MSDU building fixes (currently only affects mt76) * syzkaller & spectre fixes in hwsim * TXQ vs. teardown fix that was causing crashes * embed WMM info in reg rule, bad code here had been causing crashes * one compilation issue with fix from Arnd (rfkill-gpio includes) * fixes for a race and bad data during/after channel switch * nl80211: a validation fix, attribute type & unit fixes along with other small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-30cfg80211: nl80211_update_ft_ies() to validate NL80211_ATTR_IEArunk Khandavalli1-0/+1
nl80211_update_ft_ies() tried to validate NL80211_ATTR_IE with is_valid_ie_attr() before dereferencing it, but that helper function returns true in case of NULL pointer (i.e., attribute not included). This can result to dereferencing a NULL pointer. Fix that by explicitly checking that NL80211_ATTR_IE is included. Fixes: 355199e02b83 ("cfg80211: Extend support for IEEE 802.11r Fast BSS Transition") Signed-off-by: Arunk Khandavalli <akhandav@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-29cfg80211: clarify frames covered by average ACK signal reportBalaji Pothunoori1-3/+4
Modify the API to include all ACK frames in average ACK signal strength reporting, not just ACKs for data frames. Make exposing the data conditional on implementing the extended feature flag. This is how it was really implemented in mac80211, update the code there to use the new defines and clean up some of the setting code. Keep nl80211.h source compatibility by keeping the old names. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> [rewrite commit log, change compatibility to be old=new instead of the other way around, update kernel-doc, roll in mac80211 changes, make mac80211 depend on valid bit instead of HW flag] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-28nl80211: Pass center frequency in kHz instead of MHzHaim Dreyfuss1-1/+1
freq_reg_info expects to get the frequency in kHz. Instead we accidently pass it in MHz. Thus, currently the function always return ERR rule. Fix that. Fixes: 50f32718e125 ("nl80211: Add wmm rule attribute to NL80211_CMD_GET_WIPHY dump command") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [fix kHz/MHz in commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-28nl80211: Fix nla_put_u8 to u16 for NL80211_WMMR_TXOPHaim Dreyfuss1-2/+2
TXOP (also known as Channel Occupancy Time) is u16 and should be added using nla_put_u16 instead of u8, fix that. Fixes: 50f32718e125 ("nl80211: Add wmm rule attribute to NL80211_CMD_GET_WIPHY dump command") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-28cfg80211: make wmm_rule part of the reg_rule structureStanislaw Gruszka1-5/+5
Make wmm_rule be part of the reg_rule structure. This simplifies the code a lot at the cost of having bigger memory usage. However in most cases we have only few reg_rule's and when we do have many like in iwlwifi we do not save memory as it allocates a separate wmm_rule for each channel anyway. This also fixes a bug reported in various places where somewhere the pointers were corrupted and we ended up doing a null-dereference. Fixes: 230ebaa189af ("cfg80211: read wmm rules from regulatory database") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> [rephrase commit message slightly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-07-24Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-9/+16
2018-07-09nl80211: Add a missing break in parse_station_flagsBernd Edlinger1-0/+1
I was looking at usually suppressed gcc warnings, [-Wimplicit-fallthrough=] in this case: The code definitely looks like a break is missing here. However I am not able to test the NL80211_IFTYPE_MESH_POINT, nor do I actually know what might be :) So please use this patch with caution and only if you are able to do some testing. Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> [johannes: looks obvious enough to apply as is, interesting though that it never seems to have been a problem] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-07-06nl80211/mac80211: allow non-linear skb in rx_control_portDenis Kenzior1-9/+15
The current implementation of cfg80211_rx_control_port assumed that the caller could provide a contiguous region of memory for the control port frame to be sent up to userspace. Unfortunately, many drivers produce non-linear skbs, especially for data frames. This resulted in userspace getting notified of control port frames with correct metadata (from address, port, etc) yet garbage / nonsense contents, resulting in bad handshakes, disconnections, etc. mac80211 linearizes skbs containing management frames. But it didn't seem worthwhile to do this for control port frames. Thus the signature of cfg80211_rx_control_port was changed to take the skb directly. nl80211 then takes care of obtaining control port frame data directly from the (linear | non-linear) skb. The caller is still responsible for freeing the skb, cfg80211_rx_control_port does not take ownership of it. Fixes: 6a671a50f819 ("nl80211: Add CMD_CONTROL_PORT_FRAME API") Signed-off-by: Denis Kenzior <denkenz@gmail.com> [fix some kernel-doc formatting, add fixes tag] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-07-03Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-21/+14
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30Merge tag 'mac80211-next-for-davem-2018-06-29' of ↵David S. Miller1-44/+150
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Small merge conflict in net/mac80211/scan.c, I preserved the kcalloc() conversion. -DaveM Johannes Berg says: ==================== This round's updates: * finally some of the promised HE code, but it turns out to be small - but everything kept changing, so one part I did in the driver was >30 patches for what was ultimately <200 lines of code ... similar here for this code. * improved scan privacy support - can now specify scan flags for randomizing the sequence number as well as reducing the probe request element content * rfkill cleanups * a timekeeping cleanup from Arnd * various other cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29cfg80211: use BIT_ULL for NL80211_STA_INFO_* attribute typesOmer Efrat1-13/+13
The BIT macro uses unsigned long which some architectures handle as 32 bit and therefore might cause macro's shift to overflow when used on a value equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). Since 'filled' member in station_info changed to u64, BIT_ULL macro should be used with all NL80211_STA_INFO_* attribute types instead of BIT to prevent future possible bugs when one will use BIT macro for higher attributes by mistake. This commit cleans up all usages of BIT macro with the above field in cfg80211 by changing it to BIT_ULL instead. In addition, there are some places which don't use BIT nor BIT_ULL macros so align those as well. Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29nl80211: check nla_parse_nested() return valuesJohannes Berg1-5/+11
At the very least we should check the return value if nla_parse_nested() is called with a non-NULL policy. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29nl80211: relax ht operation checks for meshBob Copeland1-16/+3
Commit 9757235f451c, "nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") relaxed the range for the HT operation field in meshconf, while also adding checks requiring the non-greenfield and non-ht-sta bits to be set in certain circumstances. The latter bit is actually reserved for mesh BSSes according to Table 9-168 in 802.11-2016, so in fact it should not be set. wpa_supplicant sets these bits because the mesh and AP code share the same implementation, but authsae does not. As a result, some meshconf updates from authsae which set only the NONHT_MIXED protection bits were being rejected. In order to avoid breaking userspace by changing the rules again, simply accept the values with or without the bits set, and mask off the reserved bit to match the spec. While in here, update the 802.11-2012 reference to 802.11-2016. Fixes: 9757235f451c ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Cc: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Bob Copeland <bobcopeland@fb.com> Reviewed-by: Masashi Honma <masashi.honma@gmail.com> Reviewed-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-15cfg80211: Add support for HELuca Coelho1-1/+98
Add support for the HE in cfg80211 and also add userspace API to nl80211 to send rate information out, conforming with P802.11ax_D2.0. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2018-06-15nl80211: report 4ADDR status with GET_INTERFACEAntonio Quartulli1-1/+2
User space tools might be interested in knowing the current status of the 4ADDR property of an interface (when supported). Send the status along with the other attributes when replying to a GET_INTERFACE netlink query. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2018-06-15nl80211: add scan features for improved scan privacyJohannes Berg1-1/+7
Add the scan flags for randomized SN and minimized probe request content for improved scan privacy. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2018-06-15nl80211: refactor common code in scan flags checksJohannes Berg1-29/+31
There's a very common pattern to check for a scan flag and then reject it if an extended feature flag isn't set, factor this out into a helper function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-2/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nl80211: Reject disconnect commands except from conn_ownerAndrew Zaborowski1-0/+16
Reject NL80211_CMD_DISCONNECT, NL80211_CMD_DISASSOCIATE, NL80211_CMD_DEAUTHENTICATE and NL80211_CMD_ASSOCIATE commands from clients other than the connection owner set in the connect, authenticate or associate commands, if it was set. The main point of this check is to prevent chaos when two processes try to use nl80211 at the same time, it's not a security measure. The same thing should possibly be done for JOIN_IBSS/LEAVE_IBSS and START_AP/STOP_AP. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-23nl80211: Update ERP info using NL80211_CMD_UPDATE_CONNECT_PARAMSVidyullatha Kanchanapally1-0/+52
Use NL80211_CMD_UPDATE_CONNECT_PARAMS to update new ERP information, Association IEs and the Authentication type to driver / firmware which will be used in subsequent roamings. Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org> [arend: extended fils-sk kernel doc and added check in wiphy_register()] Reviewed-by: Jithu Jance <jithu.jance@broadcom.com> Reviewed-by: Eylon Pedinovsky <eylon.pedinovsky@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-23nl80211: add FILS related parameters to ROAM eventArend Van Spriel1-2/+14
In case of FILS shared key offload the parameters can change upon roaming of which user-space needs to be notified. Reviewed-by: Jithu Jance <jithu.jance@broadcom.com> Reviewed-by: Eylon Pedinovsky <eylon.pedinovsky@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-23cfg80211: use separate struct for FILS parametersArend Van Spriel1-11/+11
Put FILS related parameters into their own struct definition so it can be reused for roam events in subsequent change. Reviewed-by: Jithu Jance <jithu.jance@broadcom.com> Reviewed-by: Eylon Pedinovsky <eylon.pedinovsky@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-23nl80211: Optimize cfg80211_bss_expire invocationsDenis Kenzior1-1/+9
Only invoke cfg80211_bss_expire on the first nl80211_dump_scan invocation to avoid (likely) redundant processing. Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-23Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg1-0/+1
Bring in net-next which had pulled in net, so I have the changes from mac80211 and can apply a patch that would otherwise conflict. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-22nl80211: Fix compilationDenis Kenzior1-1/+1
Commit 7ea3e110f2f8ba23f330c2f702f556acd539bcb8 seems to have introduced: net/wireless/nl80211.c: In function ‘nl80211_get_station’: net/wireless/nl80211.c:4802:34: error: incompatible type for argument 1 of ‘cfg80211_sinfo_release_content’ cfg80211_sinfo_release_content(sinfo); ^~~~~ In file included from net/wireless/nl80211.c:24:0: ./include/net/cfg80211.h:5721:20: note: expected ‘struct station_info *’ but argument is of type ‘struct station_info’ static inline void cfg80211_sinfo_release_content(struct station_info *sinfo) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 7ea3e110f2f8 ("cfg80211: release station info tidstats where needed") Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-18cfg80211: release station info tidstats where neededJohannes Berg1-3/+8
This fixes memory leaks in cases where we got the station info but failed sending it out properly. Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info") Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-18cfg80211/mac80211: revert to stack allocation for sinfoJohannes Berg1-59/+27
Arend's previous patch made the sinfo structure smaller again by to dynamically allocating the per-tid stats only when needed. Thus, revert to stack allocation for the struct to simplify the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-18cfg80211: dynamically allocate per-tid stats for station infoArend van Spriel1-1/+2
With the addition of TXQ stats in the per-tid statistics the struct station_info grew significantly. This resulted in stack size warnings due to the structure itself being above the limit for the warnings. Add an allocation function that those who want to provide per-tid stats should use to allocate the tid array, i.e. struct station_info::pertid. Cc: Toke Høiland-Jørgensen <toke@toke.dk> Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace") Signed-off-by: Arend van Spriel <aspriel@gmail.com> [johannes: fix missing BIT() and logic by removing] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-18nl80211: fix nlmsg allocation in cfg80211_ft_eventDedy Lansky1-1/+2
Allocation size of nlmsg in cfg80211_ft_event is based on ric_ies_len and doesn't take into account ies_len. This leads to NL80211_CMD_FT_EVENT message construction failure in case ft_event contains large enough ies buffer. Add ies_len to the nlmsg allocation size. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-08cfg80211: Expose TXQ stats and parameters to userspaceToke Høiland-Jørgensen1-27/+175
This adds support for exporting the mac80211 TXQ stats via nl80211 by way of a nested TXQ stats attribute, as well as for configuring the quantum and limits that were previously only changeable through debugfs. This commit adds just the nl80211 API, a subsequent commit adds support to mac80211 itself. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-07cfg80211: average ack rssi support for data framesBalaji Pothunoori1-0/+3
Average ack rssi will be given to userspace via NL80211 interface if firmware is capable. Userspace tool ‘iw’ can process this information and give the output as one of the fields in ‘iw dev wlanX station dump’. Example output : localhost ~ #iw dev wlan-5000mhz station dump Station 34:f3:9a:aa:3b:29 (on wlan-5000mhz) inactive time: 5370 ms rx bytes: 85321 rx packets: 576 tx bytes: 14225 tx packets: 71 tx retries: 0 tx failed: 2 beacon loss: 0 rx drop misc: 0 signal: -54 dBm signal avg: -53 dBm tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2 rx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2 avg ack signal: -56 dBm authorized: yes authenticated: yes associated: yes preamble: short WMM/WME: yes MFP: no TDLS peer: no DTIM period: 2 beacon interval:100 short preamble: yes short slot time:yes connected time: 203 seconds Main use case is to measure the signal strength of a connected station to AP. Data packet transmit rates and bandwidth used by station can vary a lot even if the station is at fixed location, especially if the rates used are multi stream(2stream, 3stream) rates with different bandwidth(20/40/80 Mhz). These multi stream rates are sensitive and station can use different transmit power for each of the rate and bandwidth combinations. RSSI measured from these RX packets on AP will be not stable and can vary a lot with in a short time. Whereas 802.11 ack frames from station are sent relatively at a constant rate (6/12/24 Mbps) with constant bandwidth(20 Mhz). So average rssi of the ack packets is good and more accurate. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-07nl80211: Add wmm rule attribute to NL80211_CMD_GET_WIPHY dump commandHaim Dreyfuss1-4/+53
This will serve userspace entity to maintain its regulatory limitation. More specifcally APs can use this data to calculate the WMM IE when building: beacons, probe responses, assoc responses etc... Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-04-20nl80211: Free connkeys on external authentication failureSrinivas Dasari1-0/+1
The failure scenario while processing NL80211_ATTR_EXTERNAL_AUTH_SUPPORT does not free the connkeys. This commit addresses the same. Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29nl80211: Add control_port_over_nl80211 to mesh_setupDenis Kenzior1-0/+9
Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29nl80211: Add control_port_over_nl80211 for ibssDenis Kenzior1-0/+9
Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29nl80211: Add CONTROL_PORT_OVER_NL80211 attributeDenis Kenzior1-0/+26
Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 03:21:51 +0000