summaryrefslogtreecommitdiffstats
path: root/net/vmw_vsock
AgeCommit message (Collapse)AuthorFilesLines
2020-10-26vsock: use ns_capable_noaudit() on socket createJeff Vander Stoep1-1/+1
During __vsock_create() CAP_NET_ADMIN is used to determine if the vsock_sock->trusted should be set to true. This value is used later for determing if a remote connection should be allowed to connect to a restricted VM. Unfortunately, if the caller doesn't have CAP_NET_ADMIN, an audit message such as an selinux denial is generated even if the caller does not want a trusted socket. Logging errors on success is confusing. To avoid this, switch the capable(CAP_NET_ADMIN) check to the noaudit version. Reported-by: Roman Kiryanov <rkir@google.com> https://android-review.googlesource.com/c/device/generic/goldfish/+/1468545/ Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/r/20201023143757.377574-1-jeffv@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-12vsock: fix potential null pointer dereference in vsock_poll()Stefano Garzarella1-1/+1
syzbot reported this issue where in the vsock_poll() we find the socket state at TCP_ESTABLISHED, but 'transport' is null: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 8227 Comm: syz-executor.2 Not tainted 5.8.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:vsock_poll+0x75a/0x8e0 net/vmw_vsock/af_vsock.c:1038 Call Trace: sock_poll+0x159/0x460 net/socket.c:1266 vfs_poll include/linux/poll.h:90 [inline] do_pollfd fs/select.c:869 [inline] do_poll fs/select.c:917 [inline] do_sys_poll+0x607/0xd40 fs/select.c:1011 __do_sys_poll fs/select.c:1069 [inline] __se_sys_poll fs/select.c:1057 [inline] __x64_sys_poll+0x18c/0x440 fs/select.c:1057 do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This issue can happen if the TCP_ESTABLISHED state is set after we read the vsk->transport in the vsock_poll(). We could put barriers to synchronize, but this can only happen during connection setup, so we can simply check that 'transport' is valid. Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Reported-and-tested-by: syzbot+a61bac2fcc1a7c6623fe@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24net: pass a sockptr_t into ->setsockoptChristoph Hellwig1-2/+2
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: make ->{get,set}sockopt in proto_ops optionalChristoph Hellwig1-2/+0
Just check for a NULL method instead of wiring up sock_no_{get,set}sockopt. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-15vsock/virtio: annotate 'the_virtio_vsock' RCU pointerStefano Garzarella1-1/+1
Commit 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock") starts to use RCU to protect 'the_virtio_vsock' pointer, but we forgot to annotate it. This patch adds the annotation to fix the following sparse errors: net/vmw_vsock/virtio_transport.c:73:17: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:73:17: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:73:17: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:171:17: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:171:17: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:171:17: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:207:17: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:207:17: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:207:17: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:561:13: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:561:13: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:561:13: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:612:9: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:612:9: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:612:9: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:631:9: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:631:9: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:631:9: struct virtio_vsock * Fixes: 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock") Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-06-05vsock/vmci: make vmci_vsock_transport_cb() staticStefano Garzarella1-1/+1
Fix the following gcc-9.3 warning when building with 'make W=1': net/vmw_vsock/vmci_transport.c:2058:6: warning: no previous prototype for ‘vmci_vsock_transport_cb’ [-Wmissing-prototypes] 2058 | void vmci_vsock_transport_cb(bool is_host) | ^~~~~~~~~~~~~~~~~~~~~~~ Fixes: b1bba80a4376 ("vsock/vmci: register vmci_transport only when VMCI guest/host are active") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30virtio_vsock: Fix race condition in virtio_transport_recv_pktJia He1-0/+8
When client on the host tries to connect(SOCK_STREAM, O_NONBLOCK) to the server on the guest, there will be a panic on a ThunderX2 (armv8a server): [ 463.718844] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 463.718848] Mem abort info: [ 463.718849] ESR = 0x96000044 [ 463.718852] EC = 0x25: DABT (current EL), IL = 32 bits [ 463.718853] SET = 0, FnV = 0 [ 463.718854] EA = 0, S1PTW = 0 [ 463.718855] Data abort info: [ 463.718856] ISV = 0, ISS = 0x00000044 [ 463.718857] CM = 0, WnR = 1 [ 463.718859] user pgtable: 4k pages, 48-bit VAs, pgdp=0000008f6f6e9000 [ 463.718861] [0000000000000000] pgd=0000000000000000 [ 463.718866] Internal error: Oops: 96000044 [#1] SMP [...] [ 463.718977] CPU: 213 PID: 5040 Comm: vhost-5032 Tainted: G O 5.7.0-rc7+ #139 [ 463.718980] Hardware name: GIGABYTE R281-T91-00/MT91-FS1-00, BIOS F06 09/25/2018 [ 463.718982] pstate: 60400009 (nZCv daif +PAN -UAO) [ 463.718995] pc : virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common] [ 463.718999] lr : virtio_transport_recv_pkt+0x1fc/0xd40 [vmw_vsock_virtio_transport_common] [ 463.719000] sp : ffff80002dbe3c40 [...] [ 463.719025] Call trace: [ 463.719030] virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common] [ 463.719034] vhost_vsock_handle_tx_kick+0x360/0x408 [vhost_vsock] [ 463.719041] vhost_worker+0x100/0x1a0 [vhost] [ 463.719048] kthread+0x128/0x130 [ 463.719052] ret_from_fork+0x10/0x18 The race condition is as follows: Task1 Task2 ===== ===== __sock_release virtio_transport_recv_pkt __vsock_release vsock_find_bound_socket (found sk) lock_sock_nested vsock_remove_sock sock_orphan sk_set_socket(sk, NULL) sk->sk_shutdown = SHUTDOWN_MASK ... release_sock lock_sock virtio_transport_recv_connecting sk->sk_socket->state (panic!) The root cause is that vsock_find_bound_socket can't hold the lock_sock, so there is a small race window between vsock_find_bound_socket() and lock_sock(). If __vsock_release() is running in another task, sk->sk_socket will be set to NULL inadvertently. This fixes it by checking sk->sk_shutdown(suggested by Stefano) after lock_sock since sk->sk_shutdown is set to SHUTDOWN_MASK under the protection of lock_sock_nested. Signed-off-by: Jia He <justin.he@arm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27vsock: fix timeout in vsock_accept()Stefano Garzarella1-1/+1
The accept(2) is an "input" socket interface, so we should use SO_RCVTIMEO instead of SO_SNDTIMEO to set the timeout. So this patch replace sock_sndtimeo() with sock_rcvtimeo() to use the right timeout in the vsock_accept(). Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27vsock/virtio: fix multiple packet delivery to monitoring devicesStefano Garzarella1-0/+4
In virtio_transport.c, if the virtqueue is full, the transmitting packet is queued up and it will be sent in the next iteration. This causes the same packet to be delivered multiple times to monitoring devices. We want to continue to deliver packets to monitoring devices before it is put in the virtqueue, to avoid that replies can appear in the packet capture before the transmitted packet. This patch fixes the issue, adding a new flag (tap_delivered) in struct virtio_vsock_pkt, to check if the packet is already delivered to monitoring devices. In vhost/vsock.c, we are splitting packets, so we must set 'tap_delivered' to false when we queue up the same virtio_vsock_pkt to handle the remaining bytes. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-13/+12
The mptcp conflict was overlapping additions. The SMC conflict was an additional and removal happening at the same time. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27vsock: fix potential deadlock in transport->release()Stefano Garzarella3-13/+12
Some transports (hyperv, virtio) acquire the sock lock during the .release() callback. In the vsock_stream_connect() we call vsock_assign_transport(); if the socket was previously assigned to another transport, the vsk->transport->release() is called, but the sock lock is already held in the vsock_stream_connect(), causing a deadlock reported by syzbot: INFO: task syz-executor280:9768 blocked for more than 143 seconds. Not tainted 5.6.0-rc1-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor280 D27912 9768 9766 0x00000000 Call Trace: context_switch kernel/sched/core.c:3386 [inline] __schedule+0x934/0x1f90 kernel/sched/core.c:4082 schedule+0xdc/0x2b0 kernel/sched/core.c:4156 __lock_sock+0x165/0x290 net/core/sock.c:2413 lock_sock_nested+0xfe/0x120 net/core/sock.c:2938 virtio_transport_release+0xc4/0xd60 net/vmw_vsock/virtio_transport_common.c:832 vsock_assign_transport+0xf3/0x3b0 net/vmw_vsock/af_vsock.c:454 vsock_stream_connect+0x2b3/0xc70 net/vmw_vsock/af_vsock.c:1288 __sys_connect_file+0x161/0x1c0 net/socket.c:1857 __sys_connect+0x174/0x1b0 net/socket.c:1874 __do_sys_connect net/socket.c:1885 [inline] __se_sys_connect net/socket.c:1882 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1882 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe To avoid this issue, this patch remove the lock acquiring in the .release() callback of hyperv and virtio transports, and it holds the lock when we call vsk->transport->release() in the vsock core. Reported-by: syzbot+731710996d79d0d58fbc@syzkaller.appspotmail.com Fixes: 408624af4c89 ("vsock: use local transport when it is loaded") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16net: virtio_vsock: Enhance connection semanticsSebastien Boeuf1-0/+1
Whenever the vsock backend on the host sends a packet through the RX queue, it expects an answer on the TX queue. Unfortunately, there is one case where the host side will hang waiting for the answer and might effectively never recover if no timeout mechanism was implemented. This issue happens when the guest side starts binding to the socket, which insert a new bound socket into the list of already bound sockets. At this time, we expect the guest to also start listening, which will trigger the sk_state to move from TCP_CLOSE to TCP_LISTEN. The problem occurs if the host side queued a RX packet and triggered an interrupt right between the end of the binding process and the beginning of the listening process. In this specific case, the function processing the packet virtio_transport_recv_pkt() will find a bound socket, which means it will hit the switch statement checking for the sk_state, but the state won't be changed into TCP_LISTEN yet, which leads the code to pick the default statement. This default statement will only free the buffer, while it should also respond to the host side, by sending a packet on its TX queue. In order to simply fix this unfortunate chain of events, it is important that in case the default statement is entered, and because at this stage we know the host side is waiting for an answer, we must send back a packet containing the operation VIRTIO_VSOCK_OP_RST. One could say that a proper timeout mechanism on the host side will be enough to avoid the backend to hang. But the point of this patch is to ensure the normal use case will be provided with proper responsiveness when it comes to establishing the connection. Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-59/+6
2020-01-14hv_sock: Remove the accept port restrictionSunil Muthuswamy1-59/+6
Currently, hv_sock restricts the port the guest socket can accept connections on. hv_sock divides the socket port namespace into two parts for server side (listening socket), 0-0x7FFFFFFF & 0x80000000-0xFFFFFFFF (there are no restrictions on client port namespace). The first part (0-0x7FFFFFFF) is reserved for sockets where connections can be accepted. The second part (0x80000000-0xFFFFFFFF) is reserved for allocating ports for the peer (host) socket, once a connection is accepted. This reservation of the port namespace is specific to hv_sock and not known by the generic vsock library (ex: af_vsock). This is problematic because auto-binds/ephemeral ports are handled by the generic vsock library and it has no knowledge of this port reservation and could allocate a port that is not compatible with hv_sock (and legitimately so). The issue hasn't surfaced so far because the auto-bind code of vsock (__vsock_bind_stream) prior to the change 'VSOCK: bind to random port for VMADDR_PORT_ANY' would start walking up from LAST_RESERVED_PORT (1023) and start assigning ports. That will take a large number of iterations to hit 0x7FFFFFFF. But, after the above change to randomize port selection, the issue has started coming up more frequently. There has really been no good reason to have this port reservation logic in hv_sock from the get go. Reserving a local port for peer ports is not how things are handled generally. Peer ports should reflect the peer port. This fixes the issue by lifting the port reservation, and also returns the right peer port. Since the code converts the GUID to the peer port (by using the first 4 bytes), there is a possibility of conflicts, but that seems like a reasonable risk to take, given this is limited to vsock and that only applies to all local sockets. Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-6/+19
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16vsock/virtio: add WARN_ON check on virtio_transport_get_ops()Stefano Garzarella1-2/+15
virtio_transport_get_ops() and virtio_transport_send_pkt_info() can only be used on connecting/connected sockets, since a socket assigned to a transport is required. This patch adds a WARN_ON() on virtio_transport_get_ops() to check this requirement, a comment and a returned error on virtio_transport_send_pkt_info(), Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16vsock/virtio: fix null-pointer dereference in virtio_transport_recv_listen()Stefano Garzarella1-4/+4
With multi-transport support, listener sockets are not bound to any transport. So, calling virtio_transport_reset(), when an error occurs, on a listener socket produces the following null-pointer dereference: BUG: kernel NULL pointer dereference, address: 00000000000000e8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 20 Comm: kworker/0:1 Not tainted 5.5.0-rc1-ste-00003-gb4be21f316ac-dirty #56 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 Workqueue: virtio_vsock virtio_transport_rx_work [vmw_vsock_virtio_transport] RIP: 0010:virtio_transport_send_pkt_info+0x20/0x130 [vmw_vsock_virtio_transport_common] Code: 1f 84 00 00 00 00 00 0f 1f 00 55 48 89 e5 41 57 41 56 41 55 49 89 f5 41 54 49 89 fc 53 48 83 ec 10 44 8b 76 20 e8 c0 ba fe ff <48> 8b 80 e8 00 00 00 e8 64 e3 7d c1 45 8b 45 00 41 8b 8c 24 d4 02 RSP: 0018:ffffc900000b7d08 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88807bf12728 RCX: 0000000000000000 RDX: ffff88807bf12700 RSI: ffffc900000b7d50 RDI: ffff888035c84000 RBP: ffffc900000b7d40 R08: ffff888035c84000 R09: ffffc900000b7d08 R10: ffff8880781de800 R11: 0000000000000018 R12: ffff888035c84000 R13: ffffc900000b7d50 R14: 0000000000000000 R15: ffff88807bf12724 FS: 0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e8 CR3: 00000000790f4004 CR4: 0000000000160ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: virtio_transport_reset+0x59/0x70 [vmw_vsock_virtio_transport_common] virtio_transport_recv_pkt+0x5bb/0xe50 [vmw_vsock_virtio_transport_common] ? detach_buf_split+0xf1/0x130 virtio_transport_rx_work+0xba/0x130 [vmw_vsock_virtio_transport] process_one_work+0x1c0/0x300 worker_thread+0x45/0x3c0 kthread+0xfc/0x130 ? current_work+0x40/0x40 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 Modules linked in: sunrpc kvm_intel kvm vmw_vsock_virtio_transport vmw_vsock_virtio_transport_common irqbypass vsock virtio_rng rng_core CR2: 00000000000000e8 ---[ end trace e75400e2ea2fa824 ]--- This happens because virtio_transport_reset() calls virtio_transport_send_pkt_info() that can be used only on connecting/connected sockets. This patch fixes the issue, using virtio_transport_reset_no_sock() instead of virtio_transport_reset() when we are handling a listener socket. Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11vsock/virtio: remove loopback handlingStefano Garzarella1-59/+2
We can remove the loopback handling from virtio_transport, because now the vsock core is able to handle local communication using the new vsock_loopback device. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11vsock: use local transport when it is loadedStefano Garzarella1-5/+23
Now that we have a transport that can handle the local communication, we can use it when it is loaded. A socket will use the local transport (loopback) when the remote CID is: - equal to VMADDR_CID_LOCAL - or equal to transport_g2h->get_local_cid(), if transport_g2h is loaded (this allows us to keep the same behavior implemented by virtio and vmci transports) - or equal to VMADDR_CID_HOST, if transport_g2h is not loaded Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11vsock: add vsock_loopback transportStefano Garzarella3-0/+193
This patch adds a new vsock_loopback transport to handle local communication. This transport is based on the loopback implementation of virtio_transport, so it uses the virtio_transport_common APIs to interface with the vsock core. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11vsock: add local transport support in the vsock coreStefano Garzarella1-1/+16
This patch allows to register a transport able to handle local communication (loopback). Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11vsock: add VMADDR_CID_LOCAL definitionStefano Garzarella1-1/+1
The VMADDR_CID_RESERVED (1) was used by VMCI, but now it is not used anymore, so we can reuse it for local communication (loopback) adding the new well-know CID: VMADDR_CID_LOCAL. Cc: Jorgen Hansen <jhansen@vmware.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11vsock/virtio_transport_common: remove unused virtio header includesStefano Garzarella1-3/+0
We can remove virtio header includes, because virtio_transport_common doesn't use virtio API, but provides common functions to interface virtio/vhost transports with the af_vsock core, and to handle the protocol. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-30Merge tag 'hyperv-next-signed' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Sasha Levin: - support for new VMBus protocols (Andrea Parri) - hibernation support (Dexuan Cui) - latency testing framework (Branden Bonaby) - decoupling Hyper-V page size from guest page size (Himadri Pandya) * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic drivers/hv: Replace binary semaphore with mutex drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86 HID: hyperv: Add the support of hibernation hv_balloon: Add the support of hibernation x86/hyperv: Implement hv_is_hibernation_supported() Drivers: hv: balloon: Remove dependencies on guest page size Drivers: hv: vmbus: Remove dependencies on guest page size x86: hv: Add function to allocate zeroed page for Hyper-V Drivers: hv: util: Specify ring buffer size using Hyper-V page size Drivers: hv: Specify receive buffer size using Hyper-V page size tools: hv: add vmbus testing tool drivers: hv: vmbus: Introduce latency testing video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host hv_netvsc: Add the support of hibernation hv_sock: Add the support of hibernation video: hyperv_fb: Add the support of hibernation scsi: storvsc: Add the support of hibernation Drivers: hv: vmbus: Add module parameter to cap the VMBus version ...
2019-11-21hv_sock: Add the support of hibernationDexuan Cui1-0/+20
Add the necessary dummy callbacks for hibernation. Signed-off-by: Dexuan Cui <decui@microsoft.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-21vsock: avoid to assign transport if its initialization failsStefano Garzarella1-1/+8
If transport->init() fails, we can't assign the transport to the socket, because it's not initialized correctly, and any future calls to the transport callbacks would have an unexpected behavior. Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Reported-and-tested-by: syzbot+e2e5c07bf353b2f79daa@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: fix bind() behaviour taking care of CIDStefano Garzarella1-2/+8
When we are looking for a socket bound to a specific address, we also have to take into account the CID. This patch is useful with multi-transports support because it allows the binding of the same port with different CID, and it prevents a connection to a wrong socket bound to the same port, but with different CID. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: prevent transport modules unloadingStefano Garzarella4-4/+21
This patch adds 'module' member in the 'struct vsock_transport' in order to get/put the transport module. This prevents the module unloading while sockets are assigned to it. We increase the module refcnt when a socket is assigned to a transport, and we decrease the module refcnt when the socket is destructed. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock/vmci: register vmci_transport only when VMCI guest/host are activeStefano Garzarella1-11/+22
To allow other transports to be loaded with vmci_transport, we register the vmci_transport as G2H or H2G only when a VMCI guest or host is active. To do that, this patch adds a callback registered in the vmci driver that will be called when the host or guest becomes active. This callback will register the vmci_transport in the VSOCK core. Cc: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: add multi-transports supportStefano Garzarella5-89/+282
This patch adds the support of multiple transports in the VSOCK core. With the multi-transports support, we can use vsock with nested VMs (using also different hypervisors) loading both guest->host and host->guest transports at the same time. Major changes: - vsock core module can be loaded regardless of the transports - vsock_core_init() and vsock_core_exit() are renamed to vsock_core_register() and vsock_core_unregister() - vsock_core_register() has a feature parameter (H2G, G2H, DGRAM) to identify which directions the transport can handle and if it's support DGRAM (only vmci) - each stream socket is assigned to a transport when the remote CID is set (during the connect() or when we receive a connection request on a listener socket). The remote CID is used to decide which transport to use: - remote CID <= VMADDR_CID_HOST will use guest->host transport; - remote CID == local_cid (guest->host transport) will use guest->host transport for loopback (host->guest transports don't support loopback); - remote CID > VMADDR_CID_HOST will use host->guest transport; - listener sockets are not bound to any transports since no transport operations are done on it. In this way we can create a listener socket, also if the transports are not loaded or with VMADDR_CID_ANY to listen on all transports. - DGRAM sockets are handled as before, since only the vmci_transport provides this feature. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14hv_sock: set VMADDR_CID_HOST in the hvs_remote_addr_init()Stefano Garzarella1-1/+2
Remote peer is always the host, so we set VMADDR_CID_HOST as remote CID instead of VMADDR_CID_ANY. Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: move vsock_insert_unbound() in the vsock_create()Stefano Garzarella1-4/+9
vsock_insert_unbound() was called only when 'sock' parameter of __vsock_create() was not null. This only happened when __vsock_create() was called by vsock_create(). In order to simplify the multi-transports support, this patch moves vsock_insert_unbound() at the end of vsock_create(). Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: add vsock_create_connected() called by transportsStefano Garzarella4-13/+16
All transports call __vsock_create() with the same parameters, most of them depending on the parent socket. In order to simplify the VSOCK core APIs exposed to the transports, this patch adds the vsock_create_connected() callable from transports to create a new socket when a connection request is received. We also unexported the __vsock_create(). Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: handle buffer_size sockopts in the coreStefano Garzarella6-199/+56
virtio_transport and vmci_transport handle the buffer_size sockopts in a very similar way. In order to support multiple transports, this patch moves this handling in the core to allow the user to change the options also if the socket is not yet assigned to any transport. This patch also adds the '.notify_buffer_size' callback in the 'struct virtio_transport' in order to inform the transport, when the buffer_size is changed by the user. It is also useful to limit the 'buffer_size' requested (e.g. virtio transports). Acked-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: add 'struct vsock_sock *' param to vsock_core_get_transport()Stefano Garzarella2-9/+7
Since now the 'struct vsock_sock' object contains a pointer to the transport, this patch adds a parameter to the vsock_core_get_transport() to return the right transport assigned to the socket. This patch modifies also the virtio_transport_get_ops(), that uses the vsock_core_get_transport(), adding the 'struct vsock_sock *' parameter. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock/virtio: add transport parameter to the virtio_transport_reset_no_sock()Stefano Garzarella2-86/+86
We are going to add 'struct vsock_sock *' parameter to virtio_transport_get_ops(). In some cases, like in the virtio_transport_reset_no_sock(), we don't have any socket assigned to the packet received, so we can't use the virtio_transport_get_ops(). In order to allow virtio_transport_reset_no_sock() to use the '.send_pkt' callback from the 'vhost_transport' or 'virtio_transport', we add the 'struct virtio_transport *' to it and to its caller: virtio_transport_recv_pkt(). We moved the 'vhost_transport' and 'virtio_transport' definition, to pass their address to the virtio_transport_recv_pkt(). Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: add 'transport' member in the struct vsock_sockStefano Garzarella1-18/+38
As a preparation to support multiple transports, this patch adds the 'transport' member at the 'struct vsock_sock'. This new field is initialized during the creation in the __vsock_create() function. This patch also renames the global 'transport' pointer to 'transport_single', since for now we're only supporting a single transport registered at run-time. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: remove include/linux/vm_sockets.h fileStefano Garzarella1-1/+0
This header file now only includes the "uapi/linux/vm_sockets.h". We can include directly it when needed. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: remove vm_sockets_get_local_cid()Stefano Garzarella2-11/+1
vm_sockets_get_local_cid() is only used in virtio_transport_common.c. We can replace it calling the virtio_transport_get_ops() and using the get_local_cid() callback registered by the transport. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock/vmci: remove unused VSOCK_DEFAULT_CONNECT_TIMEOUTStefano Garzarella1-5/+0
The VSOCK_DEFAULT_CONNECT_TIMEOUT definition was introduced with commit d021c344051af ("VSOCK: Introduce VM Sockets"), but it is never used in the net/vmw_vsock/vmci_transport.c. VSOCK_DEFAULT_CONNECT_TIMEOUT is used and defined in net/vmw_vsock/af_vsock.c Cc: Jorgen Hansen <jhansen@vmware.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-3/+5
One conflict in the BPF samples Makefile, some fixes in 'net' whilst we were converting over to Makefile.target rules in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08vsock/virtio: fix sock refcnt holding during the shutdownStefano Garzarella1-3/+5
The "42f5cda5eaf4" commit rightly set SOCK_DONE on peer shutdown, but there is an issue if we receive the SHUTDOWN(RDWR) while the virtio_transport_close_timeout() is scheduled. In this case, when the timeout fires, the SOCK_DONE is already set and the virtio_transport_close_timeout() will not call virtio_transport_reset() and virtio_transport_do_close(). This causes that both sockets remain open and will never be released, preventing the unloading of [virtio|vhost]_transport modules. This patch fixes this issue, calling virtio_transport_reset() and virtio_transport_do_close() when we receive the SHUTDOWN(RDWR) and there is nothing left to read. Fixes: 42f5cda5eaf4 ("vsock/virtio: set SOCK_DONE on peer shutdown") Cc: Stephen Barber <smbarber@chromium.org> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net: use helpers to change sk_ack_backlogEric Dumazet4-5/+5
Writers are holding a lock, but many readers do not. Following patch will add appropriate barriers in sk_acceptq_removed() and sk_acceptq_added(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05vsock: Simplify '__vsock_release()'Christophe JAILLET1-3/+1
Use 'skb_queue_purge()' instead of re-implementing it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: use skb_queue_empty_lockless() in poll() handlersEric Dumazet1-1/+1
Many poll() handlers are lockless. Using skb_queue_empty_lockless() instead of skb_queue_empty() is more appropriate. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-3/+14
Several cases of overlapping changes which were for the most part trivially resolvable. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18vsock/virtio: discard packets if credit is not respectedStefano Garzarella1-3/+11
If the remote peer doesn't respect the credit information (buf_alloc, fwd_cnt), sending more data than it can send, we should drop the packets to prevent a malicious peer from using all of our memory. This is patch follows the VIRTIO spec: "VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has sufficient free buffer space for the payload" Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18vsock/virtio: send a credit update when buffer size is changedStefano Garzarella1-0/+3
When the user application set a new buffer size value, we should update the remote peer about this change, since it uses this information to calculate the credit available. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>