| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
kmemleak report a memory leak as follows:
unreferenced object 0xffff88810a596800 (size 512):
comm "ip", pid 21558, jiffies 4297568990 (age 112.120s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 00 83 60 b0 ff ff ff ff ..........`.....
backtrace:
[<0000000022bbe21f>] tipc_topsrv_init_net+0x1f3/0xa70
[<00000000fe15ddf7>] ops_init+0xa8/0x3c0
[<00000000138af6f2>] setup_net+0x2de/0x7e0
[<000000008c6807a3>] copy_net_ns+0x27d/0x530
[<000000006b21adbd>] create_new_namespaces+0x382/0xa30
[<00000000bb169746>] unshare_nsproxy_namespaces+0xa1/0x1d0
[<00000000fe2e42bc>] ksys_unshare+0x39c/0x780
[<0000000009ba3b19>] __x64_sys_unshare+0x2d/0x40
[<00000000614ad866>] do_syscall_64+0x56/0xa0
[<00000000a1b5ca3c>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
'srv' is malloced in tipc_topsrv_start() but not free before
leaving from the error handling cases. We need to free it.
Fixes: 5c45ab24ac77 ("tipc: make struct tipc_server private for server.c")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201109140913.47370-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release regressions:
- r8169: fix forced threading conflicting with other shared
interrupts; we tried to fix the use of raise_softirq_irqoff from an
IRQ handler on RT by forcing hard irqs, but this driver shares
legacy PCI IRQs so drop the _irqoff() instead
- tipc: fix memory leak caused by a recent syzbot report fix to
tipc_buf_append()
Current release - bugs in new features:
- devlink: Unlock on error in dumpit() and fix some error codes
- net/smc: fix null pointer dereference in smc_listen_decline()
Previous release - regressions:
- tcp: Prevent low rmem stalls with SO_RCVLOWAT.
- net: protect tcf_block_unbind with block lock
- ibmveth: Fix use of ibmveth in a bridge; the self-imposed filtering
to only send legal frames to the hypervisor was too strict
- net: hns3: Clear the CMDQ registers before unmapping BAR region;
incorrect cleanup order was leading to a crash
- bnxt_en - handful of fixes to fixes:
- Send HWRM_FUNC_RESET fw command unconditionally, even if there
are PCIe errors being reported
- Check abort error state in bnxt_open_nic().
- Invoke cancel_delayed_work_sync() for PFs also.
- Fix regression in workqueue cleanup logic in bnxt_remove_one().
- mlxsw: Only advertise link modes supported by both driver and
device, after removal of 56G support from the driver 56G was not
cleared from advertised modes
- net/smc: fix suppressed return code
Previous release - always broken:
- netem: fix zero division in tabledist, caused by integer overflow
- bnxt_en: Re-write PCI BARs after PCI fatal error.
- cxgb4: set up filter action after rewrites
- net: ipa: command payloads already mapped
Misc:
- s390/ism: fix incorrect system EID, it's okay to change since it
was added in current release
- vsock: use ns_capable_noaudit() on socket create to suppress false
positive audit messages"
* tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
r8169: fix issue with forced threading in combination with shared interrupts
netem: fix zero division in tabledist
ibmvnic: fix ibmvnic_set_mac
mptcp: add missing memory scheduling in the rx path
tipc: fix memory leak caused by tipc_buf_append()
gtp: fix an use-before-init in gtp_newlink()
net: protect tcf_block_unbind with block lock
ibmveth: Fix use of ibmveth in a bridge.
net/sched: act_mpls: Add softdep on mpls_gso.ko
ravb: Fix bit fields checking in ravb_hwtstamp_get()
devlink: Unlock on error in dumpit()
devlink: Fix some error codes
chelsio/chtls: fix memory leaks in CPL handlers
chelsio/chtls: fix deadlock issue
net: hns3: Clear the CMDQ registers before unmapping BAR region
bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.
bnxt_en: Check abort error state in bnxt_open_nic().
bnxt_en: Re-write PCI BARs after PCI fatal error.
bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.
bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().
...
|
|
Commit ed42989eab57 ("tipc: fix the skb_unshare() in tipc_buf_append()")
replaced skb_unshare() with skb_copy() to not reduce the data reference
counter of the original skb intentionally. This is not the correct
way to handle the cloned skb because it causes memory leak in 2
following cases:
1/ Sending multicast messages via broadcast link
The original skb list is cloned to the local skb list for local
destination. After that, the data reference counter of each skb
in the original list has the value of 2. This causes each skb not
to be freed after receiving ACK:
tipc_link_advance_transmq()
{
...
/* release skb */
__skb_unlink(skb, &l->transmq);
kfree_skb(skb); <-- memory exists after being freed
}
2/ Sending multicast messages via replicast link
Similar to the above case, each skb cannot be freed after purging
the skb list:
tipc_mcast_xmit()
{
...
__skb_queue_purge(pkts); <-- memory exists after being freed
}
This commit fixes this issue by using skb_unshare() instead. Besides,
to avoid use-after-free error reported by KASAN, the pointer to the
fragment is set to NULL before calling skb_unshare() to make sure that
the original skb is not freed after freeing the fragment 2 times in
case skb_unshare() returns NULL.
Fixes: ed42989eab57 ("tipc: fix the skb_unshare() in tipc_buf_append()")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Reported-by: Thang Hoang Ngo <thang.h.ngo@dektech.com.au>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20201027032403.1823-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 453431a54934 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.
Since then a few more instances of kzfree() have slipped in.
Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit 16ad3f4022bb
("tipc: introduce variable window congestion control"), we applied
the algorithm to select window size from minimum window to the
configured maximum window for unicast link, and, besides we chose
to keep the window size for broadcast link unchanged and equal (i.e
fix window 50)
However, when setting maximum window variable via command, the window
variable was re-initialized to unexpect value (i.e 32).
We fix this by updating the fix window for broadcast as we stated.
Fixes: 16ad3f4022bb ("tipc: introduce variable window congestion control")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The queue limit of the broadcast link is being calculated base on initial
MTU. However, when MTU value changed (e.g manual changing MTU on NIC
device, MTU negotiation etc.,) we do not re-calculate queue limit.
This gives throughput does not reflect with the change.
So fix it by calling the function to re-calculate queue limit of the
broadcast link.
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Minor conflicts in net/mptcp/protocol.h and
tools/testing/selftests/net/Makefile.
In both cases code was added on both sides in the same place
so just keep both.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the function node_lost_contact(), we call __skb_queue_purge() without
grabbing the list->lock. This can cause to a race-condition why processing
the list 'namedq' in calling path tipc_named_rcv()->tipc_named_dequeue().
[] BUG: kernel NULL pointer dereference, address: 0000000000000000
[] #PF: supervisor read access in kernel mode
[] #PF: error_code(0x0000) - not-present page
[] PGD 7ca63067 P4D 7ca63067 PUD 6c553067 PMD 0
[] Oops: 0000 [#1] SMP NOPTI
[] CPU: 1 PID: 15 Comm: ksoftirqd/1 Tainted: G O 5.9.0-rc6+ #2
[] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS [...]
[] RIP: 0010:tipc_named_rcv+0x103/0x320 [tipc]
[] Code: 41 89 44 24 10 49 8b 16 49 8b 46 08 49 c7 06 00 00 00 [...]
[] RSP: 0018:ffffc900000a7c58 EFLAGS: 00000282
[] RAX: 00000000000012ec RBX: 0000000000000000 RCX: ffff88807bde1270
[] RDX: 0000000000002c7c RSI: 0000000000002c7c RDI: ffff88807b38f1a8
[] RBP: ffff88807b006288 R08: ffff88806a367800 R09: ffff88806a367900
[] R10: ffff88806a367a00 R11: ffff88806a367b00 R12: ffff88807b006258
[] R13: ffff88807b00628a R14: ffff888069334d00 R15: ffff88806a434600
[] FS: 0000000000000000(0000) GS:ffff888079480000(0000) knlGS:0[...]
[] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[] CR2: 0000000000000000 CR3: 0000000077320000 CR4: 00000000000006e0
[] Call Trace:
[] ? tipc_bcast_rcv+0x9a/0x1a0 [tipc]
[] tipc_rcv+0x40d/0x670 [tipc]
[] ? _raw_spin_unlock+0xa/0x20
[] tipc_l2_rcv_msg+0x55/0x80 [tipc]
[] __netif_receive_skb_one_core+0x8c/0xa0
[] process_backlog+0x98/0x140
[] net_rx_action+0x13a/0x420
[] __do_softirq+0xdb/0x316
[] ? smpboot_thread_fn+0x2f/0x1e0
[] ? smpboot_thread_fn+0x74/0x1e0
[] ? smpboot_thread_fn+0x14e/0x1e0
[] run_ksoftirqd+0x1a/0x40
[] smpboot_thread_fn+0x149/0x1e0
[] ? sort_range+0x20/0x20
[] kthread+0x131/0x150
[] ? kthread_unuse_mm+0xa0/0xa0
[] ret_from_fork+0x22/0x30
[] Modules linked in: veth tipc(O) ip6_udp_tunnel udp_tunnel [...]
[] CR2: 0000000000000000
[] ---[ end trace 65c276a8e2e2f310 ]---
To fix this, we need to grab the lock of the 'namedq' list on both
path calling.
Fixes: cad2929dc432 ("tipc: update a binding service via broadcast")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_unshare() drops a reference count on the old skb unconditionally,
so in the failure case, we end up freeing the skb twice here.
And because the skb is allocated in fclone and cloned by caller
tipc_msg_reassemble(), the consequence is actually freeing the
original skb too, thus triggered the UAF by syzbot.
Fix this by replacing this skb_unshare() with skb_cloned()+skb_copy().
Fixes: ff48b6222e65 ("tipc: use skb_unshare() instead in tipc_buf_append()")
Reported-and-tested-by: syzbot+e96a7ba46281824cc46a@syzkaller.appspotmail.com
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bulk of the genetlink users can use smaller ops, move them.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the header file containing a function's prototype isn't included by
the sourcefile containing the associated function, the build system
complains of missing prototypes.
Fixes the following W=1 kernel build warning(s):
net/tipc/udp_media.c:446:5: warning: no previous prototype for ‘tipc_udp_nl_dump_remoteip’ [-Wmissing-prototypes]
net/tipc/udp_media.c:532:5: warning: no previous prototype for ‘tipc_udp_nl_add_bearer_data’ [-Wmissing-prototypes]
net/tipc/udp_media.c:614:5: warning: no previous prototype for ‘tipc_udp_nl_bearer_add’ [-Wmissing-prototypes]
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is no used any more, so can remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Drop repeated words in net/tipc/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: tipc-discussion@lists.sourceforge.net
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rekeying is required for security since a key is less secure when using
for a long time. Also, key will be detached when its nonce value (or
seqno ...) is exhausted. We now make the rekeying process automatic and
configurable by user.
Basically, TIPC will at a specific interval generate a new key by using
the kernel 'Random Number Generator' cipher, then attach it as the node
TX key and securely distribute to others in the cluster as RX keys (-
the key exchange). The automatic key switching will then take over, and
make the new key active shortly. Afterwards, the traffic from this node
will be encrypted with the new session key. The same can happen in peer
nodes but not necessarily at the same time.
For simplicity, the automatically generated key will be initiated as a
per node key. It is not too hard to also support a cluster key rekeying
(e.g. a given node will generate a unique cluster key and update to the
others in the cluster...), but that doesn't bring much benefit, while a
per-node key is even more secure.
We also enable user to force a rekeying or change the rekeying interval
via netlink, the new 'set key' command option: 'TIPC_NLA_NODE_REKEYING'
is added for these purposes as follows:
- A value >= 1 will be set as the rekeying interval (in minutes);
- A value of 0 will disable the rekeying;
- A value of 'TIPC_REKEYING_NOW' (~0) will force an immediate rekeying;
The default rekeying interval is (60 * 24) minutes i.e. done every day.
There isn't any restriction for the value but user shouldn't set it too
small or too large which results in an "ineffective" rekeying (thats ok
for testing though).
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With support from the master key option in the previous commit, it
becomes easy to make frequent updates/exchanges of session keys between
authenticated cluster nodes.
Basically, there are two situations where the key exchange will take in
place:
- When a new node joins the cluster (with the master key), it will need
to get its peer's TX key, so that be able to decrypt further messages
from that peer.
- When a new session key is generated (by either user manual setting or
later automatic rekeying feature), the key will be distributed to all
peer nodes in the cluster.
A key to be exchanged is encapsulated in the data part of a 'MSG_CRYPTO
/KEY_DISTR_MSG' TIPC v2 message, then xmit-ed as usual and encrypted by
using the master key before sending out. Upon receipt of the message it
will be decrypted in the same way as regular messages, then attached as
the sender's RX key in the receiver node.
In this way, the key exchange is reliable by the link layer, as well as
security, integrity and authenticity by the crypto layer.
Also, the forward security will be easily achieved by user changing the
master key actively but this should not be required very frequently.
The key exchange feature is independent on the presence of a master key
Note however that the master key still is needed for new nodes to be
able to join the cluster. It is also optional, and can be turned off/on
via the sysfs: 'net/tipc/key_exchange_enabled' [default 1: enabled].
Backward compatibility is guaranteed because for nodes that do not have
master key support, key exchange using master key ie. tx_key = 0 if any
will be shortly discarded at the message validation step. In other
words, the key exchange feature will be automatically disabled to those
nodes.
v2: fix the "implicit declaration of function 'tipc_crypto_key_flush'"
error in node.c. The function only exists when built with the TIPC
"CONFIG_TIPC_CRYPTO" option.
v3: use 'info->extack' for a message emitted due to netlink operations
instead (- David's comment).
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In addition to the supported cluster & per-node encryption keys for the
en/decryption of TIPC messages, we now introduce one option for user to
set a cluster key as 'master key', which is simply a symmetric key like
the former but has a longer life cycle. It has two purposes:
- Authentication of new member nodes in the cluster. New nodes, having
no knowledge of current session keys in the cluster will still be
able to join the cluster as long as they know the master key. This is
because all neighbor discovery (LINK_CONFIG) messages must be
encrypted with this key.
- Encryption of session encryption keys during automatic exchange and
update of those.This is a feature we will introduce in a later commit
in this series.
We insert the new key into the currently unused slot 0 in the key array
and start using it immediately once the user has set it.
After joining, a node only knowing the master key should be fully
communicable to existing nodes in the cluster, although those nodes may
have their own session keys activated (i.e. not the master one). To
support this, we define a 'grace period', starting from the time a node
itself reports having no RX keys, so the existing nodes will use the
master key for encryption instead. The grace period can be extended but
will automatically stop after e.g. 5 seconds without a new report. This
is also the basis for later key exchanging feature as the new node will
be impossible to decrypt anything without the support from master key.
For user to set a master key, we define a new netlink flag -
'TIPC_NLA_NODE_KEY_MASTER', so it can be added to the current 'set key'
netlink command to specify the setting key to be a master key.
Above all, the traditional cluster/per-node key mechanism is guaranteed
to work when user comes not to use this master key option. This is also
compatible to legacy nodes without the feature supported.
Even this master key can be updated without any interruption of cluster
connectivity but is so is needed, this has to be coordinated and set by
the user.
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We reduce the lasting time for a pending TX key to be active as well as
for a passive RX key to be freed which generally helps speed up the key
switching. It is not expected to be too fast but should not be too slow
either. Also the key handling logic is simplified that a pending RX key
will be removed automatically if it is found not working after a number
of times; the probing for a pending TX key is now carried on a specific
message user ('LINK_PROTOCOL' or 'LINK_CONFIG') which is more efficient
than using a timer on broadcast messages, the timer is reserved for use
later as needed.
The kernel logs or 'pr***()' are now made as clear as possible to user.
Some prints are added, removed or changed to the debug-level. The
'TIPC_CRYPTO_DEBUG' definition is removed, and the 'pr_debug()' is used
instead which will be much helpful in runtime.
Besides we also optimize the code in some other places as a preparation
for later commits.
v2: silent more kernel logs, also use 'info->extack' for a message
emitted due to netlink operations instead (- David's comments).
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix parameter description of tipc_link_bc_create()
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 16ad3f4022bb ("tipc: introduce variable window congestion control")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In tipc_buf_append() it may change skb's frag_list, and it causes
problems when this skb is cloned. skb_unclone() doesn't really
make this skb's flag_list available to change.
Shuang Li has reported an use-after-free issue because of this
when creating quite a few macvlan dev over the same dev, where
the broadcast packets will be cloned and go up to the stack:
[ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0
[ ] Call Trace:
[ ] dump_stack+0x7c/0xb0
[ ] print_address_description.constprop.7+0x1a/0x220
[ ] kasan_report.cold.10+0x37/0x7c
[ ] check_memory_region+0x183/0x1e0
[ ] pskb_expand_head+0x86d/0xea0
[ ] process_backlog+0x1df/0x660
[ ] net_rx_action+0x3b4/0xc90
[ ]
[ ] Allocated by task 1786:
[ ] kmem_cache_alloc+0xbf/0x220
[ ] skb_clone+0x10a/0x300
[ ] macvlan_broadcast+0x2f6/0x590 [macvlan]
[ ] macvlan_process_broadcast+0x37c/0x516 [macvlan]
[ ] process_one_work+0x66a/0x1060
[ ] worker_thread+0x87/0xb10
[ ]
[ ] Freed by task 3253:
[ ] kmem_cache_free+0x82/0x2a0
[ ] skb_release_data+0x2c3/0x6e0
[ ] kfree_skb+0x78/0x1d0
[ ] tipc_recvmsg+0x3be/0xa40 [tipc]
So fix it by using skb_unshare() instead, which would create a new
skb for the cloned frag and it'll be safe to change its frag_list.
The similar things were also done in sctp_make_reassembled_event(),
which is using skb_copy().
Reported-by: Shuang Li <shuali@redhat.com>
Fixes: 37e22164a8a3 ("tipc: rename and move message reassembly function")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tipc_group_add_to_tree() returns silently if `key` matches `nkey` of an
existing node, causing tipc_group_create_member() to leak memory. Let
tipc_group_add_to_tree() return an error in such a case, so that
tipc_group_create_member() can handle it properly.
Fixes: 75da2163dbb6 ("tipc: introduce communication groups")
Reported-and-tested-by: syzbot+f95d90c454864b3b5bc9@syzkaller.appspotmail.com
Cc: Hillf Danton <hdanton@sina.com>
Link: https://syzkaller.appspot.com/bug?id=048390604fe1b60df34150265479202f10e13aff
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I confirmed that the problem fixed by commit 2a63866c8b51a3f7 ("tipc: fix
shutdown() of connectionless socket") also applies to stream socket.
----------
#include <sys/socket.h>
#include <unistd.h>
#include <sys/wait.h>
int main(int argc, char *argv[])
{
int fds[2] = { -1, -1 };
socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds);
if (fork() == 0)
_exit(read(fds[0], NULL, 1));
shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */
wait(NULL); /* To be woken up by _exit(). */
return 0;
}
----------
Since shutdown(SHUT_RDWR) should affect all processes sharing that socket,
unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right
behavior.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the commit fdeba99b1e58
("tipc: fix use-after-free in tipc_bcast_get_mode"), we're trying
to make sure the tipc_net_finalize_work work item finished if it
enqueued. But calling flush_scheduled_work() is not just affecting
above work item but either any scheduled work. This has turned out
to be overkill and caused to deadlock as syzbot reported:
======================================================
WARNING: possible circular locking dependency detected
5.9.0-rc2-next-20200828-syzkaller #0 Not tainted
------------------------------------------------------
kworker/u4:6/349 is trying to acquire lock:
ffff8880aa063d38 ((wq_completion)events){+.+.}-{0:0}, at: flush_workqueue+0xe1/0x13e0 kernel/workqueue.c:2777
but task is already holding lock:
ffffffff8a879430 (pernet_ops_rwsem){++++}-{3:3}, at: cleanup_net+0x9b/0xb10 net/core/net_namespace.c:565
[...]
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(pernet_ops_rwsem);
lock(&sb->s_type->i_mutex_key#13);
lock(pernet_ops_rwsem);
lock((wq_completion)events);
*** DEADLOCK ***
[...]
v1:
To fix the original issue, we replace above calling by introducing
a bit flag. When a namespace cleaned-up, bit flag is set to zero and:
- tipc_net_finalize functionial just does return immediately.
- tipc_net_finalize_work does not enqueue into the scheduled work queue.
v2:
Use cancel_work_sync() helper to make sure ONLY the
tipc_net_finalize_work() stopped before releasing bcbase object.
Reported-by: syzbot+d5aa7e0385f6a5d0f4fd@syzkaller.appspotmail.com
Fixes: fdeba99b1e58 ("tipc: fix use-after-free in tipc_bcast_get_mode")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.
2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.
6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.
8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.
9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.
13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
|
|
syzbot is reporting hung task at nbd_ioctl() [1], for there are two
problems regarding TIPC's connectionless socket's shutdown() operation.
----------
#include <fcntl.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/nbd.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
const int fd = open("/dev/nbd0", 3);
alarm(5);
ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0));
ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */
return 0;
}
----------
One problem is that wait_for_completion() from flush_workqueue() from
nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when
nbd_start_device_ioctl() received a signal at wait_event_interruptible(),
for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from
nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl()
is failing to wake up a WQ thread sleeping at wait_woken() from
tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from
nbd_read_stat() from recv_work() scheduled by nbd_start_device() from
nbd_start_device_ioctl(). Fix this problem by always invoking
sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is
called.
The other problem is that tipc_wait_for_rcvmsg() cannot return when
tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to
SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg()
needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this
problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown()
does) when the socket is connectionless.
[1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2
Reported-by: syzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no caller in tree any more.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no caller in tree any more.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'this_cpu_ptr()' is used to obtain the AEAD key' TFM on the current
CPU for encryption, however the execution can be preemptible since it's
actually user-space context, so the 'using smp_processor_id() in
preemptible' has been observed.
We fix the issue by using the 'get/put_cpu_ptr()' API which consists of
a 'preempt_disable()' instead.
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzbot has reported those issues as:
==================================================================
BUG: KASAN: use-after-free in tipc_bcast_get_mode+0x3ab/0x400 net/tipc/bcast.c:759
Read of size 1 at addr ffff88805e6b3571 by task kworker/0:6/3850
CPU: 0 PID: 3850 Comm: kworker/0:6 Not tainted 5.8.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events tipc_net_finalize_work
Thread 1's call trace:
[...]
kfree+0x103/0x2c0 mm/slab.c:3757 <- bcbase releasing
tipc_bcast_stop+0x1b0/0x2f0 net/tipc/bcast.c:721
tipc_exit_net+0x24/0x270 net/tipc/core.c:112
[...]
Thread 2's call trace:
[...]
tipc_bcast_get_mode+0x3ab/0x400 net/tipc/bcast.c:759 <- bcbase
has already been freed by Thread 1
tipc_node_broadcast+0x9e/0xcc0 net/tipc/node.c:1744
tipc_nametbl_publish+0x60b/0x970 net/tipc/name_table.c:752
tipc_net_finalize net/tipc/net.c:141 [inline]
tipc_net_finalize+0x1fa/0x310 net/tipc/net.c:131
tipc_net_finalize_work+0x55/0x80 net/tipc/net.c:150
[...]
==================================================================
BUG: KASAN: use-after-free in tipc_named_reinit+0xef/0x290 net/tipc/name_distr.c:344
Read of size 8 at addr ffff888052ab2000 by task kworker/0:13/30628
CPU: 0 PID: 30628 Comm: kworker/0:13 Not tainted 5.8.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events tipc_net_finalize_work
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1f0/0x31e lib/dump_stack.c:118
print_address_description+0x66/0x5a0 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report+0x132/0x1d0 mm/kasan/report.c:530
tipc_named_reinit+0xef/0x290 net/tipc/name_distr.c:344
tipc_net_finalize+0x85/0xe0 net/tipc/net.c:138
tipc_net_finalize_work+0x50/0x70 net/tipc/net.c:150
process_one_work+0x789/0xfc0 kernel/workqueue.c:2269
worker_thread+0xaa4/0x1460 kernel/workqueue.c:2415
kthread+0x37e/0x3a0 drivers/block/aoe/aoecmd.c:1234
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293
[...]
Freed by task 14058:
save_stack mm/kasan/common.c:48 [inline]
set_track mm/kasan/common.c:56 [inline]
kasan_set_free_info mm/kasan/common.c:316 [inline]
__kasan_slab_free+0x114/0x170 mm/kasan/common.c:455
__cache_free mm/slab.c:3426 [inline]
kfree+0x10a/0x220 mm/slab.c:3757
tipc_exit_net+0x29/0x50 net/tipc/core.c:113
ops_exit_list net/core/net_namespace.c:186 [inline]
cleanup_net+0x708/0xba0 net/core/net_namespace.c:603
process_one_work+0x789/0xfc0 kernel/workqueue.c:2269
worker_thread+0xaa4/0x1460 kernel/workqueue.c:2415
kthread+0x37e/0x3a0 drivers/block/aoe/aoecmd.c:1234
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293
Fix it by calling flush_scheduled_work() to make sure the
tipc_net_finalize_work() stopped before releasing bcbase object.
Reported-by: syzbot+6ea1f7a8df64596ef4d7@syzkaller.appspotmail.com
Reported-by: syzbot+e9cc557752ab126c1b99@syzkaller.appspotmail.com
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
|
|
b->media->send_msg() requires rcu_read_lock(), as we can see
elsewhere in tipc, tipc_bearer_xmit, tipc_bearer_xmit_skb
and tipc_bearer_bc_xmit().
Syzbot has reported this issue as:
net/tipc/bearer.c:466 suspicious rcu_dereference_check() usage!
Workqueue: cryptd cryptd_queue_worker
Call Trace:
tipc_l2_send_msg+0x354/0x420 net/tipc/bearer.c:466
tipc_aead_encrypt_done+0x204/0x3a0 net/tipc/crypto.c:761
cryptd_aead_crypt+0xe8/0x1d0 crypto/cryptd.c:739
cryptd_queue_worker+0x118/0x1b0 crypto/cryptd.c:181
process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
kthread+0x3b5/0x4a0 kernel/kthread.c:291
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293
So fix it by calling rcu_read_lock() in tipc_aead_encrypt_done()
for b->media->send_msg().
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Reported-by: syzbot+47bbc6b678d317cccbe0@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to do 3 things for ipv6_dev_find():
As David A. noticed,
- rt6_lookup() is not really needed. Different from __ip_dev_find(),
ipv6_dev_find() doesn't have a compatibility problem, so remove it.
As Hideaki suggested,
- "valid" (non-tentative) check for the address is also needed.
ipv6_chk_addr() calls ipv6_chk_addr_and_flags(), which will
traverse the address hash list, but it's heavy to be called
inside ipv6_dev_find(). This patch is to reuse the code of
ipv6_chk_addr_and_flags() for ipv6_dev_find().
- dev parameter is passed into ipv6_dev_find(), as link-local
addresses from user space has sin6_scope_id set and the dev
lookup needs it.
Fixes: 81f6cb31222d ("ipv6: add ipv6_dev_find()")
Suggested-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the uses of fallthrough comments to fallthrough macro.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using ipv6_dev_find() in one module, it requires ipv6 not to
work as a module. Otherwise, this error occurs in build:
undefined reference to `ipv6_dev_find'.
So fix it by adding "depends on IPV6 || IPV6=n" to tipc/Kconfig,
as it does in sctp/Kconfig.
Fixes: 5a6f6f579178 ("tipc: set ub->ifindex for local ipv6 address")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__tipc_nl_compat_dumpit() has two callers, and it expects them to
pass a valid nlmsghdr via arg->data. This header is artificial and
crafted just for __tipc_nl_compat_dumpit().
tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well
as some nested attribute, TIPC_NLA_SOCK. But the other caller
tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized
on this call path.
Fix this by just adding a similar nlmsghdr without any payload in
tipc_nl_compat_dumpit().
This bug exists since day 1, but the recent commit 6ea67769ff33
("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it
easier to appear.
Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com
Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat")
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Richard Alpe <richard.alpe@ericsson.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Without ub->ifindex set for ipv6 address in tipc_udp_enable(),
ipv6_sock_mc_join() may make the wrong dev join the multicast
address in enable_mcast(). This causes that tipc links would
never be created.
So fix it by getting the right netdev and setting ub->ifindex,
as it does for ipv4 address.
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer. This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 02288248b051 ("tipc: eliminate gap indicator from ACK messages")
eliminated sending of the 'gap' indicator in regular ACK messages and
only allowed to build NACK message with enabled probe/probe_reply.
However, necessary correction for building NACK message was missed
in tipc_link_timeout() function. This leads to significant delay and
link reset (due to retransmission failure) in lossy environment.
This commit fixes it by setting the 'probe' flag to 'true' when
the receive deferred queue is not empty. As a result, NACK message
will be built to send back to another peer.
Fixes: 02288248b051 ("tipc: eliminate gap indicator from ACK messages")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simple fixes which require no deep knowledge of the code.
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All conflicts seemed rather trivial, with some guidance from
Saeed Mameed on the tc_ct.c one.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A scenario has been observed where a 'bc_init' message for a link is not
retransmitted if it fails to be received by the peer. This leads to the
peer never establishing the link fully and it discarding all other data
received on the link. In this scenario the message is lost in transit to
the peer.
The issue is traced to the 'nxt_retr' field of the skb not being
initialised for links that aren't a bc_sndlink. This leads to the
comparison in tipc_link_advance_transmq() that gates whether to attempt
retransmission of a message performing in an undesirable way.
Depending on the relative value of 'jiffies', this comparison:
time_before(jiffies, TIPC_SKB_CB(skb)->nxt_retr)
may return true or false given that 'nxt_retr' remains at the
uninitialised value of 0 for non bc_sndlinks.
This is most noticeable shortly after boot when jiffies is initialised
to a high value (to flush out rollover bugs) and we compare a jiffies of,
say, 4294940189 to zero. In that case time_before returns 'true' leading
to the skb not being retransmitted.
The fix is to ensure that all skbs have a valid 'nxt_retr' time set for
them and this is achieved by refactoring the setting of this value into
a central function.
With this fix, transmission losses of 'bc_init' messages do not stall
the link establishment forever because the 'bc_init' message is
retransmitted and the link eventually establishes correctly.
Fixes: 382f598fb66b ("tipc: reduce duplicate packets for unicast traffic")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, updating binding table (add service binding to
name table/withdraw a service binding) is being sent over replicast.
However, if we are scaling up clusters to > 100 nodes/containers this
method is less affection because of looping through nodes in a cluster one
by one.
It is worth to use broadcast to update a binding service. This way, the
binding table can be updated on all peer nodes in one shot.
Broadcast is used when all peer nodes, as indicated by a new capability
flag TIPC_NAMED_BCAST, support reception of this message type.
Four problems need to be considered when introducing this feature.
1) When establishing a link to a new peer node we still update this by a
unicast 'bulk' update. This may lead to race conditions, where a later
broadcast publication/withdrawal bypass the 'bulk', resulting in
disordered publications, or even that a withdrawal may arrive before the
corresponding publication. We solve this by adding an 'is_last_bulk' bit
in the last bulk messages so that it can be distinguished from all other
messages. Only when this message has arrived do we open up for reception
of broadcast publications/withdrawals.
2) When a first legacy node is added to the cluster all distribution
will switch over to use the legacy 'replicast' method, while the
opposite happens when the last legacy node leaves the cluster. This
entails another risk of message disordering that has to be handled. We
solve this by adding a sequence number to the broadcast/replicast
messages, so that disordering can be discovered and corrected. Note
however that we don't need to consider potential message loss or
duplication at this protocol level.
3) Bulk messages don't contain any sequence numbers, and will always
arrive in order. Hence we must exempt those from the sequence number
control and deliver them unconditionally. We solve this by adding a new
'is_bulk' bit in those messages so that they can be recognized.
4) Legacy messages, which don't contain any new bits or sequence
numbers, but neither can arrive out of order, also need to be exempt
from the initial synchronization and sequence number check, and
delivered unconditionally. Therefore, we add another 'is_not_legacy' bit
to all new messages so that those can be distinguished from legacy
messages and the latter delivered directly.
v1->v2:
- fix warning issue reported by kbuild test robot <lkp@intel.com>
- add santiy check to drop the publication message with a sequence
number that is lower than the agreed synch point
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
