summaryrefslogtreecommitdiffstats
path: root/net/tipc
AgeCommit message (Collapse)AuthorFilesLines
2019-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds3-10/+27
Pull networking fixes from David Miller: 1) Clear up some recent tipc regressions because of registration ordering. Fix from Junwei Hu. 2) tipc's TLV_SET() can read past the end of the supplied buffer during the copy. From Chris Packham. 3) ptp example program doesn't match the kernel, from Richard Cochran. 4) Outgoing message type fix in qrtr, from Bjorn Andersson. 5) Flow control regression in stmmac, from Tan Tee Min. 6) Fix inband autonegotiation in phylink, from Russell King. 7) Fix sk_bound_dev_if handling in rawv6_bind(), from Mike Manning. 8) Fix usbnet crash after disconnect, from Kloetzke Jan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) usbnet: fix kernel crash after disconnect selftests: fib_rule_tests: use pre-defined DEV_ADDR net-next: net: Fix typos in ip-sysctl.txt ipv6: Consider sk_bound_dev_if when binding a raw socket to an address net: phylink: ensure inband AN works correctly usbnet: ipheth: fix racing condition net: stmmac: dma channel control register need to be init first net: stmmac: fix ethtool flow control not able to get/set net: qrtr: Fix message type of outgoing packets networking: : fix typos in code comments ptp: Fix example program to match kernel. fddi: fix typos in code comments selftests: fib_rule_tests: enable forwarding before ipv4 from/iif test selftests: fib_rule_tests: fix local IPv4 address typo tipc: Avoid copying bytes beyond the supplied data 2/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait function 1/2] net: axienet: use readx_poll_timeout() in mdio wait function vlan: Mark expected switch fall-through macvlan: Mark expected switch fall-through net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query ...
2019-05-21Merge tag 'spdx-5.2-rc2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull SPDX update from Greg KH: "Here is a series of patches that add SPDX tags to different kernel files, based on two different things: - SPDX entries are added to a bunch of files that we missed a year ago that do not have any license information at all. These were either missed because the tool saw the MODULE_LICENSE() tag, or some EXPORT_SYMBOL tags, and got confused and thought the file had a real license, or the files have been added since the last big sweep, or they were Makefile/Kconfig files, which we didn't touch last time. - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan tools can determine the license text in the file itself. Where this happens, the license text is removed, in order to cut down on the 700+ different ways we have in the kernel today, in a quest to get rid of all of these. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers. The reason for these "large" patches is if we were to continue to progress at the current rate of change in the kernel, adding license tags to individual files in different subsystems, we would be finished in about 10 years at the earliest. There will be more series of these types of patches coming over the next few weeks as the tools and reviewers crunch through the more "odd" variants of how to say "GPLv2" that developers have come up with over the years, combined with other fun oddities (GPL + a BSD disclaimer?) that are being unearthed, with the goal for the whole kernel to be cleaned up. These diffstats are not small, 3840 files are touched, over 10k lines removed in just 24 patches" * tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3 ...
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20tipc: fix modprobe tipc failed after switch order of device registrationJunwei Hu3-10/+27
Error message printed: modprobe: ERROR: could not insert 'tipc': Address family not supported by protocol. when modprobe tipc after the following patch: switch order of device registration, commit 7e27e8d6130c ("tipc: switch order of device registration to fix a crash") Because sock_create_kern(net, AF_TIPC, ...) called by tipc_topsrv_create_listener() in the initialization process of tipc_init_net(), so tipc_socket_init() must be execute before that. Meanwhile, tipc_net_id need to be initialized when sock_create() called, and tipc_socket_init() is no need to be called for each namespace. I add a variable tipc_topsrv_net_ops, and split the register_pernet_subsys() of tipc into two parts, and split tipc_socket_init() with initialization of pernet params. By the way, I fixed resources rollback error when tipc_bcast_init() failed in tipc_init_net(). Fixes: 7e27e8d6130c ("tipc: switch order of device registration to fix a crash") Signed-off-by: Junwei Hu <hujunwei4@huawei.com> Reported-by: Wang Wang <wangwang2@huawei.com> Reported-by: syzbot+1e8114b61079bfe9cbc5@syzkaller.appspotmail.com Reviewed-by: Kang Zhou <zhoukang7@huawei.com> Reviewed-by: Suanming Mou <mousuanming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-17Revert "tipc: fix modprobe tipc failed after switch order of device ↵David S. Miller1-7/+7
registration" This reverts commit 532b0f7ece4cb2ffd24dc723ddf55242d1188e5e. More revisions coming up. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-17tipc: fix modprobe tipc failed after switch order of device registrationJunwei Hu1-7/+7
Error message printed: modprobe: ERROR: could not insert 'tipc': Address family not supported by protocol. when modprobe tipc after the following patch: switch order of device registration, commit 7e27e8d6130c ("tipc: switch order of device registration to fix a crash") Because sock_create_kern(net, AF_TIPC, ...) is called by tipc_topsrv_create_listener() in the initialization process of tipc_net_ops, tipc_socket_init() must be execute before that. I move tipc_socket_init() into function tipc_init_net(). Fixes: 7e27e8d6130c ("tipc: switch order of device registration to fix a crash") Signed-off-by: Junwei Hu <hujunwei4@huawei.com> Reported-by: Wang Wang <wangwang2@huawei.com> Reviewed-by: Kang Zhou <zhoukang7@huawei.com> Reviewed-by: Suanming Mou <mousuanming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-16tipc: switch order of device registration to fix a crashJunwei Hu1-7/+7
When tipc is loaded while many processes try to create a TIPC socket, a crash occurs: PANIC: Unable to handle kernel paging request at virtual address "dfff20000000021d" pc : tipc_sk_create+0x374/0x1180 [tipc] lr : tipc_sk_create+0x374/0x1180 [tipc] Exception class = DABT (current EL), IL = 32 bits Call trace: tipc_sk_create+0x374/0x1180 [tipc] __sock_create+0x1cc/0x408 __sys_socket+0xec/0x1f0 __arm64_sys_socket+0x74/0xa8 ... This is due to race between sock_create and unfinished register_pernet_device. tipc_sk_insert tries to do "net_generic(net, tipc_net_id)". but tipc_net_id is not initialized yet. So switch the order of the two to close the race. This can be reproduced with multiple processes doing socket(AF_TIPC, ...) and one process doing module removal. Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace") Signed-off-by: Junwei Hu <hujunwei4@huawei.com> Reported-by: Wang Wang <wangwang2@huawei.com> Reviewed-by: Xiaogang Wang <wangxiaogang3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09tipc: fix hanging clients using poll with EPOLLOUT flagParthasarathy Bhuvaragan1-2/+2
commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets") introduced a regression for clients using non-blocking sockets. After the commit, we send EPOLLOUT event to the client even in TIPC_CONNECTING state. This causes the subsequent send() to fail with ENOTCONN, as the socket is still not in TIPC_ESTABLISHED state. In this commit, we: - improve the fix for hanging poll() by replacing sk_data_ready() with sk_state_change() to wake up all clients. - revert the faulty updates introduced by commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets"). Fixes: 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets") Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04tipc: fix missing Name entries due to half-failoverTuong Lien3-7/+84
TIPC link can temporarily fall into "half-establish" that only one of the link endpoints is ESTABLISHED and starts to send traffic, PROTOCOL messages, whereas the other link endpoint is not up (e.g. immediately when the endpoint receives ACTIVATE_MSG, the network interface goes down...). This is a normal situation and will be settled because the link endpoint will be eventually brought down after the link tolerance time. However, the situation will become worse when the second link is established before the first link endpoint goes down, For example: 1. Both links <1A-2A>, <1B-2B> down 2. Link endpoint 2A up, but 1A still down (e.g. due to network disturbance, wrong session, etc.) 3. Link <1B-2B> up 4. Link endpoint 2A down (e.g. due to link tolerance timeout) 5. Node B starts failover onto link <1B-2B> ==> Node A does never start link failover. When the "half-failover" situation happens, two consequences have been observed: a) Peer link/node gets stuck in FAILINGOVER state; b) Traffic or user messages that peer node is trying to failover onto the second link can be partially or completely dropped by this node. The consequence a) was actually solved by commit c140eb166d68 ("tipc: fix failover problem"), but that commit didn't cover the b). It's due to the fact that the tunnel link endpoint has never been prepared for a failover, so the 'l->drop_point' (and the other data...) is not set correctly. When a TUNNEL_MSG from peer node arrives on the link, depending on the inner message's seqno and the current 'l->drop_point' value, the message can be dropped (- treated as a duplicate message) or processed. At this early stage, the traffic messages from peer are likely to be NAME_DISTRIBUTORs, this means some name table entries will be missed on the node forever! The commit resolves the issue by starting the FAILOVER process on this node as well. Another benefit from this solution is that we ensure the link will not be re-established until the failover ends. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg2-0/+22
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg8-86/+90
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek10-36/+36
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26tipc: remove rcu_read_unlock() left in tipc_udp_recv()Eric Dumazet1-1/+0
I forgot to remove one rcu_read_unlock() before a return statement. Joy of mixing goto and return styles in a function :) Fixes: 4109a2c3b91e ("tipc: tipc_udp_recv() cleanup vs rcu verbs") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24tipc: tipc_udp_recv() cleanup vs rcu verbsEric Dumazet1-6/+3
First thing tipc_udp_recv() does is to use rcu_dereference_sk_user_data(), and this is really hinting we already own rcu_read_lock() from the caller (UDP stack). No need to add another rcu_read_lock()/rcu_read_unlock() pair. Also use rcu_dereference() instead of rcu_dereference_rtnl() in the data path. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19tipc: introduce new socket option TIPC_SOCK_RECVQ_USEDTung Nguyen1-0/+3
When using TIPC_SOCK_RECVQ_DEPTH for getsockopt(), it returns the number of buffers in receive socket buffer which is not so helpful for user space applications. This commit introduces the new option TIPC_SOCK_RECVQ_USED which returns the current allocated bytes of the receive socket buffer. This helps user space applications dimension its buffer usage to avoid buffer overload issue. Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-3/+10
Conflict resolution of af_smc.c from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-16tipc: set sysctl_tipc_rmem and named_timeout right rangeJie Liu1-2/+6
We find that sysctl_tipc_rmem and named_timeout do not have the right minimum setting. sysctl_tipc_rmem should be larger than zero, like sysctl_tcp_rmem. And named_timeout as a timeout setting should be not less than zero. Fixes: cc79dd1ba9c10 ("tipc: change socket buffer overflow control to respect sk_rcvbuf") Fixes: a5325ae5b8bff ("tipc: add name distributor resiliency queue") Signed-off-by: Jie Liu <liujie165@huawei.com> Reported-by: Qiang Ning <ningqiang1@huawei.com> Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-16tipc: fix link established but not in sessionTuong Lien1-0/+2
According to the link FSM, when a link endpoint got RESET_MSG (- a traditional one without the stopping bit) from its peer, it moves to PEER_RESET state and raises a LINK_DOWN event which then resets the link itself. Its state will become ESTABLISHING after the reset event and the link will be re-established soon after this endpoint starts to send ACTIVATE_MSG to the peer. There is no problem with this mechanism, however the link resetting has cleared the link 'in_session' flag (along with the other important link data such as: the link 'mtu') that was correctly set up at the 1st step (i.e. when this endpoint received the peer RESET_MSG). As a result, the link will become ESTABLISHED, but the 'in_session' flag is not set, and all STATE_MSG from its peer will be dropped at the link_validate_msg(). It means the link not synced and will sooner or later face a failure. Since the link reset action is obviously needed for a new link session (this is also true in the other situations), the problem here is that the link is re-established a bit too early when the link endpoints are not really in-sync yet. The commit forces a resync as already done in the previous commit 91986ee166cf ("tipc: fix link session and re-establish issues") by simply varying the link 'peer_session' value at the link_reset(). Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11tipc: use standard write_lock & unlock functions when creating nodeJon Maloy1-2/+3
In the function tipc_node_create() we protect the peer capability field by using the node rw_lock. However, we access the lock directly instead of using the dedicated functions for this, as we do everywhere else in node.c. This cosmetic spot is fixed here. Fixes: 40999f11ce67 ("tipc: make link capability update thread safe") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10tipc: missing entries in name table of publicationsHoang Le1-1/+2
When binding multiple services with specific type 1Ki, 2Ki.., this leads to some entries in the name table of publications missing when listed out via 'tipc name show'. The problem is at identify zero last_type conditional provided via netlink. The first is initial 'type' when starting name table dummping. The second is continuously with zero type (node state service type). Then, lookup function failure to finding node state service type in next iteration. To solve this, adding more conditional to marked as dirty type and lookup correct service type for the next iteration instead of select the first service as initial 'type' zero. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+20
Minor comment merge conflict in mlx5. Staging driver has a fixup due to the skb->xmit_more changes in 'net-next', but was removed in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04tipc: adapt link failover for new Gap-ACK algorithmTuong Lien1-26/+80
In commit 0ae955e2656d ("tipc: improve TIPC throughput by Gap ACK blocks"), we enhance the link transmq by releasing as many packets as possible with the multi-ACKs from peer node. This also means the queue is now non-linear and the peer link deferdq becomes vital. Whereas, in the case of link failover, all messages in the link transmq need to be transmitted as tunnel messages in such a way that message sequentiality and cardinality per sender is preserved. This requires us to maintain the link deferdq somehow, so that when the tunnel messages arrive, the inner user messages along with the ones in the deferdq will be delivered to upper layer correctly. The commit accomplishes this by defining a new queue in the TIPC link structure to hold the old link deferdq when link failover happens and process it upon receipt of tunnel messages. Also, in the case of link syncing, the link deferdq will not be purged to avoid unnecessary retransmissions that in the worst case will fail because the packets might have been freed on the sending side. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04tipc: reduce duplicate packets for unicast trafficTuong Lien2-10/+37
For unicast transmission, the current NACK sending althorithm is over- active that forces the sending side to retransmit a packet that is not really lost but just arrived at the receiving side with some delay, or even retransmit same packets that have already been retransmitted before. As a result, many duplicates are observed also under normal condition, ie. without packet loss. One example case is: node1 transmits 1 2 3 4 10 5 6 7 8 9, when node2 receives packet #10, it puts into the deferdq. When the packet #5 comes it sends NACK with gap [6 - 9]. However, shortly after that, when packet #6 arrives, it pulls out packet #10 from the deferfq, but it is still out of order, so it makes another NACK with gap [7 - 9] and so on ... Finally, node1 has to retransmit the packets 5 6 7 8 9 a number of times, but in fact all the packets are not lost at all, so duplicates! This commit reduces duplicates by changing the condition to send NACK, also restricting the retransmissions on individual packets via a timer of about 1ms. However, it also needs to say that too tricky condition for NACKs or too long timeout value for retransmissions will result in performance reducing! The criterias in this commit are found to be effective for both the requirements to reduce duplicates but not affect performance. The tipc_link_rcv() is also improved to only dequeue skb from the link deferdq if it is expected (ie. its seqno <= rcv_nxt). Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04tipc: improve TIPC throughput by Gap ACK blocksTuong Lien3-12/+159
During unicast link transmission, it's observed very often that because of one or a few lost/dis-ordered packets, the sending side will fastly reach the send window limit and must wait for the packets to be arrived at the receiving side or in the worst case, a retransmission must be done first. The sending side cannot release a lot of subsequent packets in its transmq even though all of them might have already been received by the receiving side. That is, one or two packets dis-ordered/lost and dozens of packets have to wait, this obviously reduces the overall throughput! This commit introduces an algorithm to overcome this by using "Gap ACK blocks". Basically, a Gap ACK block will consist of <ack, gap> numbers that describes the link deferdq where packets have been got by the receiving side but with gaps, for example: link deferdq: [1 2 3 4 10 11 13 14 15 20] --> Gap ACK blocks: <4, 5>, <11, 1>, <15, 4>, <20, 0> The Gap ACK blocks will be sent to the sending side along with the traditional ACK or NACK message. Immediately when receiving the message the sending side will now not only release from its transmq the packets ack-ed by the ACK but also by the Gap ACK blocks! So, more packets can be enqueued and transmitted. In addition, the sending side can now do "multi-retransmissions" according to the Gaps reported in the Gap ACK blocks. The new algorithm as verified helps greatly improve the TIPC throughput especially under packet loss condition. So far, a maximum of 32 blocks is quite enough without any "Too few Gap ACK blocks" reports with a 5.0% packet loss rate, however this number can be increased in the furture if needed. Also, the patch is backward compatible. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04tipc: add NULL pointer checkHoang Le1-0/+3
skb somehow dequeued out of inputq before processing, it causes to NULL pointer and kernel crashed. Add checking skb valid before using. Fixes: c55c8edafa9 ("tipc: smooth change between replicast and broadcast") Reported-by: Tuong Lien Tong <tuong.t.lien@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31tipc: handle the err returned from cmd header functionXin Long1-2/+8
Syzbot found a crash: BUG: KMSAN: uninit-value in tipc_nl_compat_name_table_dump+0x54f/0xcd0 net/tipc/netlink_compat.c:872 Call Trace: tipc_nl_compat_name_table_dump+0x54f/0xcd0 net/tipc/netlink_compat.c:872 __tipc_nl_compat_dumpit+0x59e/0xda0 net/tipc/netlink_compat.c:215 tipc_nl_compat_dumpit+0x63a/0x820 net/tipc/netlink_compat.c:280 tipc_nl_compat_handle net/tipc/netlink_compat.c:1226 [inline] tipc_nl_compat_recv+0x1b5f/0x2750 net/tipc/netlink_compat.c:1265 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline] genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] Uninit was created at: __alloc_skb+0x309/0xa20 net/core/skbuff.c:208 alloc_skb include/linux/skbuff.h:1012 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] It was supposed to be fixed on commit 974cb0e3e7c9 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump") by checking TLV_GET_DATA_LEN(msg->req) in cmd->header()/tipc_nl_compat_name_table_dump_header(), which is called ahead of tipc_nl_compat_name_table_dump(). However, tipc_nl_compat_dumpit() doesn't handle the error returned from cmd header function. It means even when the check added in that fix fails, it won't stop calling tipc_nl_compat_name_table_dump(), and the issue will be triggered again. So this patch is to add the process for the err returned from cmd header function in tipc_nl_compat_dumpit(). Reported-by: syzbot+3ce8520484b0d4e260a5@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31tipc: check link name with right length in tipc_nl_compat_link_setXin Long1-1/+6
A similar issue as fixed by Patch "tipc: check bearer name with right length in tipc_nl_compat_bearer_enable" was also found by syzbot in tipc_nl_compat_link_set(). The length to check with should be 'TLV_GET_DATA_LEN(msg->req) - offsetof(struct tipc_link_config, name)'. Reported-by: syzbot+de00a87b8644a582ae79@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31tipc: check bearer name with right length in tipc_nl_compat_bearer_enableXin Long1-1/+6
Syzbot reported the following crash: BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:961 memchr+0xce/0x110 lib/string.c:961 string_is_valid net/tipc/netlink_compat.c:176 [inline] tipc_nl_compat_bearer_enable+0x2c4/0x910 net/tipc/netlink_compat.c:401 __tipc_nl_compat_doit net/tipc/netlink_compat.c:321 [inline] tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:354 tipc_nl_compat_handle net/tipc/netlink_compat.c:1162 [inline] tipc_nl_compat_recv+0x1ae7/0x2750 net/tipc/netlink_compat.c:1265 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline] genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] Uninit was created at: __alloc_skb+0x309/0xa20 net/core/skbuff.c:208 alloc_skb include/linux/skbuff.h:1012 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] It was triggered when the bearer name size < TIPC_MAX_BEARER_NAME, it would check with a wrong len/TLV_GET_DATA_LEN(msg->req), which also includes priority and disc_domain length. This patch is to fix it by checking it with a right length: 'TLV_GET_DATA_LEN(msg->req) - offsetof(struct tipc_bearer_config, name)'. Reported-by: syzbot+8b707430713eb46e1e45@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Move ipv6 stubs to a separate header fileDavid Ahern1-1/+1
The number of stubs is growing and has nothing to do with addrconf. Move the definition of the stubs to a separate header file and update users. In the move, drop the vxlan specific comment before ipv6_stub. Code move only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-7/+6
2019-03-26tipc: fix return value check in tipc_mcast_send_sync()Wei Yongjun1-1/+1
Fix the return value check which testing the wrong variable in tipc_mcast_send_sync(). Fixes: c55c8edafa91 ("tipc: smooth change between replicast and broadcast") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26tipc: change to check tipc_own_id to return in tipc_net_stopXin Long1-4/+1
When running a syz script, a panic occurred: [ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.094315] Call Trace: [ 156.094844] <IRQ> [ 156.095306] dump_stack+0x7c/0xc0 [ 156.097346] print_address_description+0x65/0x22e [ 156.100445] kasan_report.cold.3+0x37/0x7a [ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.106517] call_timer_fn+0x19a/0x610 [ 156.112749] run_timer_softirq+0xb51/0x1090 It was caused by the netns freed without deleting the discoverer timer, while later on the netns would be accessed in the timer handler. The timer should have been deleted by tipc_net_stop() when cleaning up a netns. However, tipc has been able to enable a bearer and start d->timer without the local node_addr set since Commit 52dfae5c85a4 ("tipc: obtain node identity from interface by default"), which caused the timer not to be deleted in tipc_net_stop() then. So fix it in tipc_net_stop() by changing to check local node_id instead of local node_addr, as Jon suggested. While at it, remove the calling of tipc_nametbl_withdraw() there, since tipc_nametbl_stop() will take of the nametbl's freeing after. Fixes: 52dfae5c85a4 ("tipc: obtain node identity from interface by default") Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23tipc: tipc clang warningJon Maloy1-3/+4
When checking the code with clang -Wsometimes-uninitialized we get the following warning: if (!tipc_link_is_establishing(l)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/tipc/node.c:847:46: note: uninitialized use occurs here tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr); net/tipc/node.c:831:2: note: remove the 'if' if its condition is always true if (!tipc_link_is_establishing(l)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/tipc/node.c:821:31: note: initialize the variable 'maddr' to silence this warning struct tipc_media_addr *maddr; We fix this by initializing 'maddr' to NULL. For the matter of clarity, we also test if 'xmitq' is non-empty before we use it and 'maddr' further down in the function. It will never happen that 'xmitq' is non- empty at the same time as 'maddr' is NULL, so this is a sufficient test. Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22genetlink: make policy common to familyJohannes Berg1-21/+1
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21tipc: fix a null pointer derefHoang Le3-3/+6
In commit c55c8edafa91 ("tipc: smooth change between replicast and broadcast") we introduced new method to eliminate the risk of message reordering that happen in between different nodes. Unfortunately, we forgot checking at receiving side to ignore intra node. We fix this by checking and returning if arrived message from intra node. syzbot report: ================================================================== kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 7820 Comm: syz-executor418 Not tainted 5.0.0+ #61 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tipc_mcast_filter_msg+0x21b/0x13d0 net/tipc/bcast.c:782 Code: 45 c0 0f 84 39 06 00 00 48 89 5d 98 e8 ce ab a5 fa 49 8d bc 24 c8 00 00 00 48 b9 00 00 00 00 00 fc ff df 48 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 9a 0e 00 00 49 8b 9c 24 c8 00 00 00 48 be 00 00 RSP: 0018:ffff8880959defc8 EFLAGS: 00010202 RAX: 0000000000000019 RBX: ffff888081258a48 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffffffff86cab862 RDI: 00000000000000c8 RBP: ffff8880959df030 R08: ffff8880813d0200 R09: ffffed1015d05bc8 R10: ffffed1015d05bc7 R11: ffff8880ae82de3b R12: 0000000000000000 R13: 000000000000002c R14: 0000000000000000 R15: ffff888081258a48 FS: 000000000106a880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020001cc0 CR3: 0000000094a20000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tipc_sk_filter_rcv+0x182d/0x34f0 net/tipc/socket.c:2168 tipc_sk_enqueue net/tipc/socket.c:2254 [inline] tipc_sk_rcv+0xc45/0x25a0 net/tipc/socket.c:2305 tipc_sk_mcast_rcv+0x724/0x1020 net/tipc/socket.c:1209 tipc_mcast_xmit+0x7fe/0x1200 net/tipc/bcast.c:410 tipc_sendmcast+0xb36/0xfc0 net/tipc/socket.c:820 __tipc_sendmsg+0x10df/0x18d0 net/tipc/socket.c:1358 tipc_sendmsg+0x53/0x80 net/tipc/socket.c:1291 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 ___sys_sendmsg+0x806/0x930 net/socket.c:2260 __sys_sendmsg+0x105/0x1d0 net/socket.c:2298 __do_sys_sendmsg net/socket.c:2307 [inline] __se_sys_sendmsg net/socket.c:2305 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2305 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4401c9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd887fa9d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9 RDX: 0000000000000000 RSI: 0000000020002140 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a50 R13: 0000000000401ae0 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace ba79875754e1708f ]--- Reported-by: syzbot+be4bdf2cc3e85e952c50@syzkaller.appspotmail.com Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21tipc: fix use-after-free in tipc_sk_filter_rcvHoang Le1-1/+2
skb free-ed in: 1/ condition 1: tipc_sk_filter_rcv -> tipc_sk_proto_rcv 2/ condition 2: tipc_sk_filter_rcv -> tipc_group_filter_msg This leads to a "use-after-free" access in the next condition. We fix this by intializing the variable at declaration, then it is safe to check this variable to continue processing if condition matches. syzbot report: ================================================================== BUG: KASAN: use-after-free in tipc_sk_filter_rcv+0x2166/0x34f0 net/tipc/socket.c:2167 Read of size 4 at addr ffff88808ea58534 by task kworker/u4:0/7 CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.0.0+ #61 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: tipc_send tipc_conn_send_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 tipc_sk_filter_rcv+0x2166/0x34f0 net/tipc/socket.c:2167 tipc_sk_enqueue net/tipc/socket.c:2254 [inline] tipc_sk_rcv+0xc45/0x25a0 net/tipc/socket.c:2305 tipc_topsrv_kern_evt+0x3b7/0x580 net/tipc/topsrv.c:610 tipc_conn_send_to_sock+0x43e/0x5f0 net/tipc/topsrv.c:283 tipc_conn_send_work+0x65/0x80 net/tipc/topsrv.c:303 process_one_work+0x98e/0x1790 kernel/workqueue.c:2269 worker_thread+0x98/0xe40 kernel/workqueue.c:2415 kthread+0x357/0x430 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+e863893591cc7a622e40@syzkaller.appspotmail.com Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21tipc: fix cancellation of topology subscriptionsErik Hugne1-0/+1
When cancelling a subscription, we have to clear the cancel bit in the request before iterating over any established subscriptions with memcmp. Otherwise no subscription will ever be found, and it will not be possible to explicitly unsubscribe individual subscriptions. Fixes: 8985ecc7c1e0 ("tipc: simplify endianness handling in topology subscriber") Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19tipc: smooth change between replicast and broadcastHoang Le4-1/+184
Currently, a multicast stream may start out using replicast, because there are few destinations, and then it should ideally switch to L2/broadcast IGMP/multicast when the number of destinations grows beyond a certain limit. The opposite should happen when the number decreases below the limit. To eliminate the risk of message reordering caused by method change, a sending socket must stick to a previously selected method until it enters an idle period of 5 seconds. Means there is a 5 seconds pause in the traffic from the sender socket. If the sender never makes such a pause, the method will never change, and transmission may become very inefficient as the cluster grows. With this commit, we allow such a switch between replicast and broadcast without any need for a traffic pause. Solution is to send a dummy message with only the header, also with the SYN bit set, via broadcast or replicast. For the data message, the SYN bit is set and sending via replicast or broadcast (inverse method with dummy). Then, at receiving side any messages follow first SYN bit message (data or dummy message), they will be held in deferred queue until another pair (dummy or data message) arrived in other link. v2: reverse christmas tree declaration Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19tipc: introduce new capability flag for clusterHoang Le4-2/+27
As a preparation for introducing a smooth switching between replicast and broadcast method for multicast message, We have to introduce a new capability flag TIPC_MCAST_RBCTL to handle this new feature. During a cluster upgrade a node can come back with this new capabilities which also must be reflected in the cluster capabilities field. The new feature is only applicable if all node in the cluster supports this new capability. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19tipc: support broadcast/replicast configurable for bc-linkHoang Le4-5/+118
Currently, a multicast stream uses either broadcast or replicast as transmission method, based on the ratio between number of actual destinations nodes and cluster size. However, when an L2 interface (e.g., VXLAN) provides pseudo broadcast support, this becomes very inefficient, as it blindly replicates multicast packets to all cluster/subnet nodes, irrespective of whether they host actual target sockets or not. The TIPC multicast algorithm is able to distinguish real destination nodes from other nodes, and hence provides a smarter and more efficient method for transferring multicast messages than pseudo broadcast can do. Because of this, we now make it possible for users to force the broadcast link to permanently switch to using replicast, irrespective of which capabilities the bearer provides, or pretend to provide. Conversely, we also make it possible to force the broadcast link to always use true broadcast. While maybe less useful in deployed systems, this may at least be useful for testing the broadcast algorithm in small clusters. We retain the current AUTOSELECT ability, i.e., to let the broadcast link automatically select which algorithm to use, and to switch back and forth between broadcast and replicast as the ratio between destination node number and cluster size changes. This remains the default method. Furthermore, we make it possible to configure the threshold ratio for such switches. The default ratio is now set to 10%, down from 25% in the earlier implementation. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-17tipc: allow service ranges to be connect()'ed on RDM/DGRAMErik Hugne1-5/+15
We move the check that prevents connecting service ranges to after the RDM/DGRAM check, and move address sanity control to a separate function that also validates the service range. Fixes: 23998835be98 ("tipc: improve address sanity check in tipc_connect()") Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-16net: tipc: fix a missing check for nla_nest_startKangjie Lu1-0/+2
nla_nest_start may fail. The fix check its status and returns -EMSGSIZE in case it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-16net: tipc: fix a missing check of nla_nest_startKangjie Lu1-0/+3
nla_nest_start could fail and requires a check. The fix returns -EMSGSIZE if it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-05tipc: fix RDM/DGRAM connect() regressionErik Hugne1-1/+1
Fix regression bug introduced in commit 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Only signal -EDESTADDRREQ for RDM/DGRAM if we don't have a cached sockaddr. Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+5
2019-02-26tipc: fix race condition causing hung sendtoTung Nguyen1-1/+5
When sending multicast messages via blocking socket, if sending link is congested (tsk->cong_link_cnt is set to 1), the sending thread will be put into sleeping state. However, tipc_sk_filter_rcv() is called under socket spin lock but tipc_wait_for_cond() is not. So, there is no guarantee that the setting of tsk->cong_link_cnt to 0 in tipc_sk_proto_rcv() in CPU-1 will be perceived by CPU-0. If that is the case, the sending thread in CPU-0 after being waken up, will continue to see tsk->cong_link_cnt as 1 and put the sending thread into sleeping state again. The sending thread will sleep forever. CPU-0 | CPU-1 tipc_wait_for_cond() | { | // condition_ = !tsk->cong_link_cnt | while ((rc_ = !(condition_))) { | ... | release_sock(sk_); | wait_woken(); | | if (!sock_owned_by_user(sk)) | tipc_sk_filter_rcv() | { | ... | tipc_sk_proto_rcv() | { | ... | tsk->cong_link_cnt--; | ... | sk->sk_write_space(sk); | ... | } | ... | } sched_annotate_sleep(); | lock_sock(sk_); | remove_wait_queue(); | } | } | This commit fixes it by adding memory barrier to tipc_sk_proto_rcv() and tipc_wait_for_cond(). Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+6
Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21tipc: improve function tipc_wait_for_rcvmsg()Tung Nguyen1-4/+5
This commit replaces schedule_timeout() with wait_woken() in function tipc_wait_for_rcvmsg(). wait_woken() uses memory barriers in its implementation to avoid potential race condition when putting a process into sleeping state and then waking it up. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21tipc: improve function tipc_wait_for_cond()Tung Nguyen1-1/+1
Commit 844cf763fba6 ("tipc: make macro tipc_wait_for_cond() smp safe") replaced finish_wait() with remove_wait_queue() but still used prepare_to_wait(). This causes unnecessary conditional checking before adding to wait queue in prepare_to_wait(). This commit replaces prepare_to_wait() with add_wait_queue() as the pair function with remove_wait_queue(). Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-6/+44
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>