summaryrefslogtreecommitdiffstats
path: root/net/tipc
AgeCommit message (Collapse)AuthorFilesLines
2014-04-24net: Use netlink_ns_capable to verify the permisions of netlink messagesEric W. Biederman1-1/+1
It is possible by passing a netlink socket to a more privileged executable and then to fool that executable into writing to the socket data that happens to be valid netlink message to do something that privileged executable did not intend to do. To keep this from happening replace bare capable and ns_capable calls with netlink_capable, netlink_net_calls and netlink_ns_capable calls. Which act the same as the previous calls except they verify that the opener of the socket had the desired permissions as well. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller2-5/+5
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-07tipc: Let tipc_release() return 0Geert Uytterhoeven1-2/+1
net/tipc/socket.c: In function ‘tipc_release’: net/tipc/socket.c:352: warning: ‘res’ is used uninitialized in this function Introduced by commit 24be34b5a0c9114541891d29dff1152bb1a8df34 ("tipc: eliminate upcall function pointers between port and socket"), which removed the sole initializer of "res". Just return 0 to fix it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-03tipc: fix regression bug where node events are not being generatedErik Hugne1-0/+3
Commit 5902385a2440a55f005b266c93e0bb9398e5a62b ("tipc: obsolete the remote management feature") introduces a regression where node topology events are not being generated because the publication that triggers this: {0, <z.c.n>, <z.c.n>} is no longer available. This will break applications that rely on node events to discover when nodes join/leave a cluster. We fix this by advertising the node publication when TIPC enters networking mode, and withdraws it upon shutdown. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28tipc: make discovery domain a bearer attributeErik Hugne3-16/+10
The node discovery domain is assigned when a bearer is enabled. In the previous commit we reflect this attribute directly in the bearer structure since it's needed to reinitialize the node discovery mechanism after a hardware address change. There's no need to replicate this attribute anywhere else, so we remove it from the tipc_link_req structure. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28tipc: fix neighbor detection problem after hw address changeErik Hugne2-0/+9
If the hardware address of a underlying netdevice is changed, it is not enough to simply reset the bearer/links over this device. We also need to reflect this change in the TIPC bearer and node discovery structures aswell. This patch adds the necessary reinitialization of the node disovery mechanism following a hardware address change so that the correct originating media address is advertised in the discovery messages. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reported-by: Dong Liu <dliu.cn@gmail.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27tipc: use node list lock to protect tipc_num_links variableYing Xue1-10/+11
Without properly implicit or explicit read memory barrier, it's unsafe to read an atomic variable with atomic_read() from another thread which is different with the thread of changing the atomic variable with atomic_inc() or atomic_dec(). So a stale tipc_num_links may be got with atomic_read() in tipc_node_get_links(). If the tipc_num_links variable type is converted from atomic to unsigned integer and node list lock is used to protect it, the issue would be avoided. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27tipc: use node_list_lock to protect tipc_num_nodes variableYing Xue1-4/+3
As tipc_node_list is protected by rcu read lock on read side, it's unnecessary to hold node_list_lock to protect tipc_node_list in tipc_node_get_links(). Instead, node_list_lock should just protects tipc_num_nodes in the function. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27tipc: tipc: convert node list and node hlist to RCU listsYing Xue4-21/+31
Convert tipc_node_list list and node_htable hash list to RCU lists. On read side, the two lists are protected with RCU read lock, and on update side, node_list_lock is applied to them. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27tipc: rename node create lock to protect node list and hlistYing Xue3-35/+35
When a node is created, tipc_net_lock read lock is first held and then node_create_lock is grabbed in order to prevent the same node from being created and inserted into both node list and hlist twice. But when we query node from the two node lists, we only hold tipc_net_lock read lock without grabbing node_create_lock. Obviously this locking policy is unable to guarantee that the two node lists are always synchronized especially when the operation of changing and accessing them occurs in different contexts like currently doing. Therefore, rename node_create_lock to node_list_lock to protect the two node lists, that is, whenever node is inserted into them or node is queried from them, the node_list_lock should be always held. As a result, tipc_net_lock read lock becomes redundant and then can be removed from the node query functions. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27tipc: make broadcast bearer store in bearer_list arrayYing Xue2-4/+6
Now unicast bearer is dynamically allocated and placed into its identity specified slot of bearer_list array. When we search bearer_list array with a bearer identity, the corresponding bearer instance can be found. But broadcast bearer is statically allocated and it is not located in the bearer_list array yet. So we decide to enlarge bearer_list array into MAX_BEARERS + 1 slots, and its last slot stores the broadcast bearer so that the broadcast bearer can be found from bearer_list array with MAX_BEARERS as index. The change will help us reduce the complex relationship between bearer and link in the future. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27tipc: remove active flag from tipc_bearer structureYing Xue4-12/+5
After the allocation of tipc_bearer structure instance is converted from statical way to dynamical way, we identify whether a certain tipc_bearer structure pointer is valid by checking whether the pointer is NULL or not. So the active flag in tipc_bearer structure becomes redundant. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27tipc: convert tipc_bearers array to pointer listYing Xue3-15/+38
As part of the effort to introduce RCU protection for the bearer list, we first need to change it to a list of pointers. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27tipc: acquire necessary locks in named_cluster_distribute routineYing Xue1-3/+11
The 'tipc_node_list' is guarded by tipc_net_lock and 'links' array defined in 'tipc_node' structure is protected by node lock as well. Without acquiring the two locks in named_cluster_distribute() a fatal oops may happen in case that a destroyed link might be got and then accessed. Therefore, above mentioned two locks must be held in named_cluster_distribute() to prevent the issue from happening accidentally. As 'links' array in node struct must be protected by node lock, we have to move the code of selecting an active link from tipc_link_xmit() to named_cluster_distribute() and then call __tipc_link_xmit() with the selected link to deliver name messages. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27tipc: obsolete the remote management featureYing Xue5-121/+3
Due to the lacking of any credential, it's allowed to accept commands requested from remote nodes to query the local node status, which is prone to involve potential security risks. Instead, if we login to a remote node with ssh command, this approach is not only more safe than the remote management feature, but also it can give us more permissions like changing the remote node configuration. So it's reasonable for us to obsolete the remote management feature now. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27tipc: remove unnecessary checking for node objectYing Xue1-6/+0
tipc_node_create routine doesn't need to check whether a node object specified with a node address exists or not because its caller(ie, tipc_disc_recv_msg routine) has checked this before calling it. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-14/+15
Conflicts: Documentation/devicetree/bindings/net/micrel-ks8851.txt net/core/netpoll.c The net/core/netpoll.c conflict is a bug fix in 'net' happening to code which is completely removed in 'net-next'. In micrel-ks8851.txt we simply have overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24tipc: fix spinlock recursion bug for failed subscriptionsErik Hugne1-14/+15
If a topology event subscription fails for any reason, such as out of memory, max number reached or because we received an invalid request the correct behavior is to terminate the subscribers connection to the topology server. This is currently broken and produces the following oops: [27.953662] tipc: Subscription rejected, illegal request [27.955329] BUG: spinlock recursion on CPU#1, kworker/u4:0/6 [27.957066] lock: 0xffff88003c67f408, .magic: dead4ead, .owner: kworker/u4:0/6, .owner_cpu: 1 [27.958054] CPU: 1 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.0-rc6+ #5 [27.960230] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [27.960874] Workqueue: tipc_rcv tipc_recv_work [tipc] [27.961430] ffff88003c67f408 ffff88003de27c18 ffffffff815c0207 ffff88003de1c050 [27.962292] ffff88003de27c38 ffffffff815beec5 ffff88003c67f408 ffffffff817f0a8a [27.963152] ffff88003de27c58 ffffffff815beeeb ffff88003c67f408 ffffffffa0013520 [27.964023] Call Trace: [27.964292] [<ffffffff815c0207>] dump_stack+0x45/0x56 [27.964874] [<ffffffff815beec5>] spin_dump+0x8c/0x91 [27.965420] [<ffffffff815beeeb>] spin_bug+0x21/0x26 [27.965995] [<ffffffff81083df6>] do_raw_spin_lock+0x116/0x140 [27.966631] [<ffffffff815c6215>] _raw_spin_lock_bh+0x15/0x20 [27.967256] [<ffffffffa0008540>] subscr_conn_shutdown_event+0x20/0xa0 [tipc] [27.968051] [<ffffffffa000fde4>] tipc_close_conn+0xa4/0xb0 [tipc] [27.968722] [<ffffffffa00101ba>] tipc_conn_terminate+0x1a/0x30 [tipc] [27.969436] [<ffffffffa00089a2>] subscr_conn_msg_event+0x1f2/0x2f0 [tipc] [27.970209] [<ffffffffa0010000>] tipc_receive_from_sock+0x90/0xf0 [tipc] [27.970972] [<ffffffffa000fa79>] tipc_recv_work+0x29/0x50 [tipc] [27.971633] [<ffffffff8105dbf5>] process_one_work+0x165/0x3e0 [27.972267] [<ffffffff8105e869>] worker_thread+0x119/0x3a0 [27.972896] [<ffffffff8105e750>] ? manage_workers.isra.25+0x2a0/0x2a0 [27.973622] [<ffffffff810648af>] kthread+0xdf/0x100 [27.974168] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0 [27.974893] [<ffffffff815ce13c>] ret_from_fork+0x7c/0xb0 [27.975466] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0 The recursion occurs when subscr_terminate tries to grab the subscriber lock, which is already taken by subscr_conn_msg_event. We fix this by checking if the request to establish a new subscription was successful, and if not we initiate termination of the subscriber after we have released the subscriber lock. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-37/+47
Conflicts: drivers/net/usb/r8152.c drivers/net/xen-netback/netback.c Both the r8152 and netback conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12tipc: eliminate redundant lookups in registryJon Paul Maloy5-64/+50
As an artefact from the native interface, the message sending functions in the port takes a port ref as first parameter, and then looks up in the registry to find the corresponding port pointer. This despite the fact that the only currently existing caller, tipc_sock, already knows this pointer. We change the signature of these functions to take a struct tipc_port* argument, and remove the redundant lookups. We also remove an unmotivated extra lookup in the function socket.c:auto_connect(), and, as the lookup functions tipc_port_deref() and ref_deref() now become unused, we remove these two functions. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12tipc: align usage of variable names and macros in socketJon Paul Maloy3-84/+98
The practice of naming variables in TIPC is inconistent, sometimes even within the same file. In this commit we align variable names and declarations within socket.c, and function and macro names within socket.h. We also reduce the number of conversion macros to two, in order to make usage less obsure. These changes are purely cosmetic. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12tipc: eliminate redundant lockingJon Paul Maloy3-109/+47
The three functions tipc_portimportance(), tipc_portunreliable() and tipc_portunreturnable() and their corresponding tipc_set* functions, are all grabbing port_lock when accessing the targeted port. This is unnecessary in the current code, since these calls only are made from within socket downcalls, already protected by sock_lock. We remove the redundant locking. Also, since the functions now become trivial one-liners, we move them to port.h and make them inline. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12tipc: eliminate upcall function pointers between port and socketJon Paul Maloy5-58/+34
Due to the original one-to-many relation between port and user API layers, upcalls to the API have been performed via function pointers, installed in struct tipc_port at creation. Since this relation now always is one-to-one, we can instead use ordinary function calls. We remove the function pointers 'dispatcher' and ´wakeup' from struct tipc_port, and replace them with calls to the renamed functions tipc_sk_rcv() and tipc_sk_wakeup(). At the same time we change the name and signature of the functions tipc_createport() and tipc_deleteport() to reflect their new role as mere initialization/destruction functions. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12tipc: aggregate port structure into socket structureJon Paul Maloy4-54/+101
After the removal of the tipc native API the relation between a tipc_port and its API types is strictly one-to-one, i.e, the latter can now only be a socket API. There is therefore no need to allocate struct tipc_port and struct sock independently. In this commit, we aggregate struct tipc_port into struct tipc_sock, hence saving both CPU cycles and structure complexity. There are no functional changes in this commit, except for the elimination of the separate allocation/freeing of tipc_port. All other changes are just adaptatons to the new data structure. This commit also opens up for further code simplifications and code volume reduction, something we will do in later commits. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12tipc: remove redundant 'peer_name' field in struct tipc_sockJon Paul Maloy3-27/+30
The field 'peer_name' in struct tipc_sock is redundant, since this information already is available from tipc_port, to which tipc_sock has a reference. We remove the field, and ensure that peer node and peer port info instead is fetched via the functions that already exist for this purpose. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12tipc: replace reference table rwlock with spinlockJon Paul Maloy1-5/+5
The lock for protecting the reference table is declared as an RWLOCK, although it is only used in write mode, never in read mode. We redefine it to become a spinlock. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12tipc: Convert uses of __constant_<foo> to <foo>Joe Perches1-1/+1
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06tipc: don't log disabled tasklet handler errorsErik Hugne1-1/+0
Failure to schedule a TIPC tasklet with tipc_k_signal because the tasklet handler is disabled is not an error. It means TIPC is currently in the process of shutting down. We remove the error logging in this case. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06tipc: fix memory leak during module removalErik Hugne1-3/+34
When the TIPC module is removed, the tasklet handler is disabled before all other subsystems. This will cause lingering publications in the name table because the node_down tasklets responsible to clean up publications from an unreachable node will never run. When the name table is shut down, these publications are detected and an error message is logged: tipc: nametbl_stop(): orphaned hash chain detected This is actually a memory leak, introduced with commit 993b858e37b3120ee76d9957a901cca22312ffaa ("tipc: correct the order of stopping services at rmmod") Instead of just logging an error and leaking memory, we free the orphaned entries during nametable shutdown. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06tipc: drop subscriber connection id invalidationErik Hugne1-11/+0
When a topology server subscriber is disconnected, the associated connection id is set to zero. A check vs zero is then done in the subscription timeout function to see if the subscriber have been shut down. This is unnecessary, because all subscription timers will be cancelled when a subscriber terminates. Setting the connection id to zero is actually harmful because id zero is the identity of the topology server listening socket, and can cause a race that leads to this socket being closed instead. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06tipc: avoid to unnecessary process switch under non-block modeYing Xue1-2/+2
When messages are received via tipc socket under non-block mode, schedule_timeout() is called in tipc_wait_for_rcvmsg(), that is, the process of receiving messages will be scheduled once although timeout value passed to schedule_timeout() is 0. The same issue exists in accept()/wait_for_accept(). To avoid this unnecessary process switch, we only call schedule_timeout() if the timeout value is non-zero. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06tipc: fix connection refcount leakYing Xue1-2/+4
When tipc_conn_sendmsg() calls tipc_conn_lookup() to query a connection instance, its reference count value is increased if it's found. But subsequently if it's found that the connection is closed, the work of sending message is not queued into its server send workqueue, and the connection reference count is not decreased. This will cause a reference count leak. To reproduce this problem, an application would need to open and closes topology server connections with high intensity. We fix this by immediately decrementing the connection reference count if a send fails due to the connection being closed. Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06tipc: allow connection shutdown callback to be invoked in advanceYing Xue3-18/+7
Currently connection shutdown callback function is called when connection instance is released in tipc_conn_kref_release(), and receiving packets and sending packets are running in different threads. Even if connection is closed by the thread of receiving packets, its shutdown callback may not be called immediately as the connection reference count is non-zero at that moment. So, although the connection is shut down by the thread of receiving packets, the thread of sending packets doesn't know it. Before its shutdown callback is invoked to tell the sending thread its connection has been closed, the sending thread may deliver messages by tipc_conn_sendmsg(), this is why the following error information appears: "Sending subscription event failed, no memory" To eliminate it, allow connection shutdown callback function to be called before connection id is removed in tipc_close_conn(), which makes the sending thread know the truth in time that its socket is closed so that it doesn't send message to it. We also remove the "Sending XXX failed..." error reporting for topology and config services. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller10-82/+66
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-22tipc: make bearer set up in module insertion stageYing Xue4-32/+16
Accidentally a side effect is involved by commit 6e967adf7(tipc: relocate common functions from media to bearer). Now tipc stack handler of receiving packets from netdevices as well as netdevice notification handler are registered when bearer is enabled rather than tipc module initialization stage, but the two handlers are both unregistered in tipc module exit phase. If tipc module is inserted and then immediately removed, the following warning message will appear: "dev_remove_pack: ffffffffa0380940 not found" This is because in module insertion stage tipc stack packet handler is not registered at all, but in module exit phase dev_remove_pack() needs to remove it. Of course, dev_remove_pack() cannot find tipc protocol handler from the kernel protocol handler list so that the warning message is printed out. But if registering the two handlers is adjusted from enabling bearer phase into inserting module stage, the warning message will be eliminated. Due to this change, tipc_core_start_net() and tipc_core_stop_net() can be deleted as well. Reported-by: Wang Weidong <wangweidong1@huawei.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-22tipc: remove all enabled flags from all tipc componentsYing Xue7-50/+50
When tipc module is inserted, many tipc components are initialized one by one. During the initialization period, if one of them is failed, tipc_core_stop() will be called to stop all components whatever corresponding components are created or not. To avoid to release uncreated ones, relevant components have to add necessary enabled flags indicating whether they are created or not. But in the initialization stage, if one component is unsuccessfully created, we will just destroy successfully created components before the failed component instead of all components. All enabled flags defined in components, in turn, become redundant. Additionally it's also unnecessary to identify whether table.types is NULL in tipc_nametbl_stop() because name stable has been definitely created successfully when tipc_nametbl_stop() is called. Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19tipc: failed transmissions should return errorErik Hugne1-8/+6
When a message could not be sent out because the destination node or link could not be found, the full message size is returned from sendmsg() as if it had been sent successfully. An application will then get a false indication that it's making forward progress. This problem has existed since the initial commit in 2.6.16. We change this to return -ENETUNREACH if the message cannot be delivered due to the destination node/link being unavailable. We also get rid of the redundant tipc_reject_msg call since freeing the buffer and doing a tipc_port_iovec_reject accomplishes exactly the same thing. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-0/+8
Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18tipc: align tipc function names with common naming practice in the networkYing Xue13-287/+290
Rename the following functions, which are shorter and more in line with common naming practice in the network subsystem. tipc_bclink_send_msg->tipc_bclink_xmit tipc_bclink_recv_pkt->tipc_bclink_rcv tipc_disc_recv_msg->tipc_disc_rcv tipc_link_send_proto_msg->tipc_link_proto_xmit link_recv_proto_msg->tipc_link_proto_rcv link_send_sections_long->tipc_link_iovec_long_xmit tipc_link_send_sections_fast->tipc_link_iovec_xmit_fast tipc_link_send_sync->tipc_link_sync_xmit tipc_link_recv_sync->tipc_link_sync_rcv tipc_link_send_buf->__tipc_link_xmit tipc_link_send->tipc_link_xmit tipc_link_send_names->tipc_link_names_xmit tipc_named_recv->tipc_named_rcv tipc_link_recv_bundle->tipc_link_bundle_rcv tipc_link_dup_send_queue->tipc_link_dup_queue_xmit link_send_long_buf->tipc_link_frag_xmit tipc_multicast->tipc_port_mcast_xmit tipc_port_recv_mcast->tipc_port_mcast_rcv tipc_port_reject_sections->tipc_port_iovec_reject tipc_port_recv_proto_msg->tipc_port_proto_rcv tipc_connect->tipc_port_connect __tipc_connect->__tipc_port_connect __tipc_disconnect->__tipc_port_disconnect tipc_disconnect->tipc_port_disconnect tipc_shutdown->tipc_port_shutdown tipc_port_recv_msg->tipc_port_rcv tipc_port_recv_sections->tipc_port_iovec_rcv release->tipc_release accept->tipc_accept bind->tipc_bind get_name->tipc_getname poll->tipc_poll send_msg->tipc_sendmsg send_packet->tipc_send_packet send_stream->tipc_send_stream recv_msg->tipc_recvmsg recv_stream->tipc_recv_stream connect->tipc_connect listen->tipc_listen shutdown->tipc_shutdown setsockopt->tipc_setsockopt getsockopt->tipc_getsockopt Above changes have no impact on current users of the functions. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17tipc: correct usage of spin_lock() vs spin_lock_bh()Jon Paul Maloy1-3/+3
I commit e099e86c9e24fe9aff36773600543eb31d8954d ("tipc: add node_lock protection to link lookup function") we are calling spin_lock(&node->lock) directly instead of indirectly via the tipc_node_lock(node) function. However, tipc_node_lock() is using spin_lock_bh(), not spin_lock(), something leading to unbalanced usage in one place, and a smatch warning. We fix this by consistently using tipc_node_lock()/unlock() in in the places touched by the mentioned commit. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17tipc: fix a loop style problemJon Paul Maloy1-5/+5
In commit 7d33939f475d403e79124e3143d7951dcfe8629f ("tipc: delay delete of link when failover is needed") we introduced a loop for finding and removing a link pointer in an array. The removal is done after we have left the loop, giving the impression that one may remove the wrong pointer if no matching element is found. This is not really a bug, since we know that there will always be a matching element, but it looks wrong, and causes a smatch warning. We fix this loop with this commit. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13tipc: add node_lock protection to link lookup functionJon Paul Maloy1-45/+65
In an earlier commit, ("tipc: remove links list from bearer struct") we described three issues that need to be pre-emptively resolved before we can remove tipc_net_lock. Here we resolve issue a) described in that commit: "a) In access method #2, we access the link before taking the protecting node_lock. This will not work once net_lock is gone, so we will have to change the access order. We will deal with this in a later commit in this series." Here, we change that access order, by ensuring that the function link_find_link() returns only a safe reference for finding the link, i.e., a node pointer and an index into its 'links' array, not the link pointer itself. We also change all callers of this function to first take the node lock before they can check if there still is a valid link pointer at the returned index. Since the function now returns a node pointer rather than a link pointer, we rename it to the more appropriate 'tipc_link_find_owner(). Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13tipc: remove bearer_lock from tipc_bearer structYing Xue3-18/+4
After the earlier commits ("tipc: remove 'links' list from tipc_bearer struct") and ("tipc: introduce new spinlock to protect struct link_req"), there is no longer any need to protect struct link_req or or any link list by use of bearer_lock. Furthermore, we have eliminated the need for using bearer_lock during downcalls (send) from the link to the bearer, since we have ensured that bearers always have a longer life cycle that their associated links, and always contain valid data. So, the only need now for a lock protecting bearers is for guaranteeing consistency of the bearer list itself. For this, it is sufficient, at least for the time being, to continue applying 'net_lock´ in write mode. By removing bearer_lock we also pre-empt introduction of issue b) descibed in the previous commit "tipc: remove 'links' list from tipc_bearer struct": "b) When the outer protection from net_lock is gone, taking bearer_lock and node_lock in opposite order of method 1) and 2) will become an obvious deadlock hazard". Therefore, we now eliminate the bearer_lock spinlock. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13tipc: delay delete of link when failover is neededJon Paul Maloy4-17/+36
When a bearer is disabled, all its attached links are deleted. Ideally, we should do link failover to redundant links on other bearers, if there are any, in such cases. This would be consistent with current behavior when a link is reset, but not deleted. However, due to the complexity involved, and the (wrongly) perceived low demand for this feature, it was never implemented until now. We mark the doomed link for deletion with a new flag, but wait until the failover process is finished before we actually delete it. With the improved link tunnelling/failover code introduced earlier in this commit series, it is now easy to identify a spot in the code where the failover is finished and it is safe to delete the marked link. Moreover, the test for the flag and the deletion can be done synchronously, and outside the most time critical data path. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13tipc: changes to general packet reception algorithmJon Paul Maloy1-36/+40
We change the order of checking for destination users when processing incoming packets. By placing the checks for users that may potentially replace the processed buffer, i.e., CHANGEOVER_PROTOCOL and MSG_FRAGMENTER, in a separate step before we check for the true end users, we get rid of a label and a 'goto', at the same time making the code more comprehensible and easy to follow. This commit does not change any functionality, it is just a cosmetic code reshuffle. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13tipc: rename stack variables in function tipc_link_tunnel_rcvJon Paul Maloy1-11/+11
After the previous redesign of the tunnel reception algorithm and functions, we finalize it by renaming a couple of stack variables in tipc_tunnel_rcv(). This makes it more consistent with the naming scheme elsewhere in this part of the code. This change is purely cosmetic, with no functional changes. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13tipc: more cleanup of tunnelling reception functionJon Paul Maloy1-14/+7
We simplify and slim down the code in function tipc_tunnel_rcv() No impact on the users of this function. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13tipc: change signature of tunnelling reception functionJon Paul Maloy1-10/+4
After the earlier commits in this series related to the function tipc_link_tunnel_rcv(), we can now go further and simplify its signature. The function now consumes all DUPLICATE packets, and only returns such ORIGINAL packets that are ready for immediate delivery, i.e., no more link level protocol processing needs to be done by the caller. As a consequence, the the caller, tipc_rcv(), does not access the link pointer after call return, and it becomes unnecessary to pass a link pointer reference in the call. Instead, we now only pass it the tunnel link's owner node, which is sufficient to find the destination link for the tunnelled packet. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13tipc: change reception of tunnelled failover packetsJon Paul Maloy1-28/+47
When a link is reset, and there is a redundant link available, all sender sockets will steer their subsequent traffic through the remaining link. In order to guarantee preserved packet order and cardinality during the transition, we tunnel the failing link's send queue through the remaining link before we allow any sockets to use it. In this commit, we change the algorithm for receiving failover ("ORIGINAL_MSG") packets in tipc_link_tunnel_rcv(), at the same time delegating it to a new subfuncton, tipc_link_failover_rcv(). Instead of directly returning an extracted inner packet to the packet reception loop in tipc_rcv(), we first check if it is a message fragment, in which case we append it to the reset link's fragment chain. If the fragment chain is complete, we return the whole chain instead of the individual buffer, eliminating any need for the tipc_rcv() loop to do reassembly of tunneled packets. This change makes it possible to further simplify tipc_link_tunnel_rcv(), as well as the calling tipc_rcv() loop. We will do that in later commits. It also makes it possible to identify a single spot in the code where we can tell that a failover procedure is finished, something that is useful when we are deleting links after a failover. This will also be done in a later commit. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13tipc: change reception of tunnelled duplicate packetsJon Paul Maloy1-21/+32
When a second link to a destination comes up, some sender sockets will steer their subsequent traffic through the new link. In order to guarantee preserved packet order and cardinality for those sockets, we tunnel a duplicate of the old link's send queue through the new link before we open it for regular traffic. The last arriving packet copy, on whichever link, will be dropped at the receiving end based on the original sequence number, to ensure that only one copy is delivered to the end receiver. In this commit, we change the algorithm for receiving DUPLICATE_MSG packets, at the same time delegating it to a new subfunction, tipc_link_dup_rcv(). Instead of returning an extracted inner packet to the packet reception loop in tipc_rcv(), we just add it to the receiving (new) link's deferred packet queue. The packet will then be processed by that link when it receives its first non-tunneled packet, i.e., at latest when the changeover procedure is finished. Because tipc_link_tunnel_rcv()/tipc_link_dup_rcv() now is consuming all packets of type DUPLICATE_MSG, the calling tipc_rcv() function can omit testing for this. This in turn means that the current conditional jump to the label 'protocol_check' becomes redundant, and we can remove that label. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>