summaryrefslogtreecommitdiffstats
path: root/net/tipc
AgeCommit message (Collapse)AuthorFilesLines
2020-04-18tipc: Fix potential tipc_node refcnt leak in tipc_rcvXiyu Yang1-1/+3
tipc_rcv() invokes tipc_node_find() twice, which returns a reference of the specified tipc_node object to "n" with increased refcnt. When tipc_rcv() returns or a new object is assigned to "n", the original local reference of "n" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in some paths of tipc_rcv(), which forget to decrease the refcnt increased by tipc_node_find() and will cause a refcnt leak. Fix this issue by calling tipc_node_put() before the original object pointed by "n" becomes invalid. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-18tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcvXiyu Yang1-0/+1
tipc_crypto_rcv() invokes tipc_aead_get(), which returns a reference of the tipc_aead object to "aead" with increased refcnt. When tipc_crypto_rcv() returns, the original local reference of "aead" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in one error path of tipc_crypto_rcv(). When TIPC message decryption status is EINPROGRESS or EBUSY, the function forgets to decrease the refcnt increased by tipc_aead_get() and causes a refcnt leak. Fix this issue by calling tipc_aead_put() on the error path when TIPC message decryption status is EINPROGRESS or EBUSY. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15tipc: fix incorrect increasing of link windowTuong Lien1-1/+1
In commit 16ad3f4022bb ("tipc: introduce variable window congestion control"), we allow link window to change with the congestion avoidance algorithm. However, there is a bug that during the slow-start if packet retransmission occurs, the link will enter the fast-recovery phase, set its window to the 'ssthresh' which is never less than 300, so the link window suddenly increases to that limit instead of decreasing. Consequently, two issues have been observed: - For broadcast-link: it can leave a gap between the link queues that a new packet will be inserted and sent before the previous ones, i.e. not in-order. - For unicast: the algorithm does not work as expected, the link window jumps to the slow-start threshold whereas packet retransmission occurs. This commit fixes the issues by avoiding such the link window increase, but still decreasing if the 'ssthresh' is lowered. Fixes: 16ad3f4022bb ("tipc: introduce variable window congestion control") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26tipc: Add a missing case of TIPC_DIRECT_MSG typeHoang Le3-2/+8
In the commit f73b12812a3d ("tipc: improve throughput between nodes in netns"), we're missing a check to handle TIPC_DIRECT_MSG type, it's still using old sending mechanism for this message type. So, throughput improvement is not significant as expected. Besides that, when sending a large message with that type, we're also handle wrong receiving queue, it should be enqueued in socket receiving instead of multicast messages. Fix this by adding the missing case for TIPC_DIRECT_MSG. Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Reported-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15tipc: add NULL pointer check to prevent kernel oopsHoang Le1-2/+10
Calling: tipc_node_link_down()-> - tipc_node_write_unlock()->tipc_mon_peer_down() - tipc_mon_peer_down() just after disabling bearer could be caused kernel oops. Fix this by adding a sanity check to make sure valid memory access. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15tipc: simplify trivial boolean returnHoang Le1-3/+0
Checking and returning 'true' boolean is useless as it will be returning at end of function Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03tipc: add missing attribute validation for MTU propertyJakub Kicinski1-0/+1
Add missing attribute validation for TIPC_NLA_PROP_MTU to the netlink policy. Fixes: 901271e0403a ("tipc: implement configuration of UDP media MTU") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-10tipc: fix successful connect() but timed outTuong Lien1-0/+2
In commit 9546a0b7ce00 ("tipc: fix wrong connect() return code"), we fixed the issue with the 'connect()' that returns zero even though the connecting has failed by waiting for the connection to be 'ESTABLISHED' really. However, the approach has one drawback in conjunction with our 'lightweight' connection setup mechanism that the following scenario can happen: (server) (client) +- accept()| | wait_for_conn() | | |connect() -------+ | |<-------[SYN]---------| > sleeping | | *CONNECTING | |--------->*ESTABLISHED | | |--------[ACK]-------->*ESTABLISHED > wakeup() send()|--------[DATA]------->|\ > wakeup() send()|--------[DATA]------->| | > wakeup() . . . . |-> recvq . . . . . | . send()|--------[DATA]------->|/ > wakeup() close()|--------[FIN]-------->*DISCONNECTING | *DISCONNECTING | | | ~~~~~~~~~~~~~~~~~~> schedule() | wait again . . | ETIMEDOUT Upon the receipt of the server 'ACK', the client becomes 'ESTABLISHED' and the 'wait_for_conn()' process is woken up but not run. Meanwhile, the server starts to send a number of data following by a 'close()' shortly without waiting any response from the client, which then forces the client socket to be 'DISCONNECTING' immediately. When the wait process is switched to be running, it continues to wait until the timer expires because of the unexpected socket state. The client 'connect()' will finally get ‘-ETIMEDOUT’ and force to release the socket whereas there remains the messages in its receive queue. Obviously the issue would not happen if the server had some delay prior to its 'close()' (or the number of 'DATA' messages is large enough), but any kind of delay would make the connection setup/shutdown "heavy". We solve this by simply allowing the 'connect()' returns zero in this particular case. The socket is already 'DISCONNECTING', so any further write will get '-EPIPE' but the socket is still able to read the messages existing in its receive queue. Note: This solution doesn't break the previous one as it deals with a different situation that the socket state is 'DISCONNECTING' but has no error (i.e. sk->sk_err = 0). Fixes: 9546a0b7ce00 ("tipc: fix wrong connect() return code") Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-10tipc: make three functions staticChen Wandun1-3/+4
Fix the following sparse warning: net/tipc/node.c:281:6: warning: symbol 'tipc_node_free' was not declared. Should it be static? net/tipc/node.c:2801:5: warning: symbol '__tipc_nl_node_set_key' was not declared. Should it be static? net/tipc/node.c:2878:5: warning: symbol '__tipc_nl_node_flush_key' was not declared. Should it be static? Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Fixes: e1f32190cf7d ("tipc: add support for AEAD key setting via netlink") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds12-87/+239
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-25Merge branch 'for-mingo' of ↵Ingo Molnar1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Expedited grace-period updates - kfree_rcu() updates - RCU list updates - Preemptible RCU updates - Torture-test updates - Miscellaneous fixes - Documentation updates Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-28/+37
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08tipc: fix wrong connect() return codeTuong Lien1-2/+2
The current 'tipc_wait_for_connect()' function does a wait-loop for the condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket connecting has done. However, when the condition is met, it returns '0' even in the case the connecting is actually failed, the socket state is set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..). This results in a wrong return code for the 'connect()' call from user, making it believe that the connection is established and go ahead with building, sending a message, etc. but finally failed e.g. '-EPIPE'. This commit fixes the issue by changing the wait condition to the 'tipc_sk_connected(sk)', so the function will return '0' only when the connection is really established. Otherwise, either the socket 'sk_err' if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08tipc: fix link overflow issue at socket shutdownTuong Lien1-21/+32
When a socket is suddenly shutdown or released, it will reject all the unreceived messages in its receive queue. This applies to a connected socket too, whereas there is only one 'FIN' message required to be sent back to its peer in this case. In case there are many messages in the queue and/or some connections with such messages are shutdown at the same time, the link layer will easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level because of the message rejections. As a result, the link will be taken down. Moreover, immediately when the link is re-established, the socket layer can continue to reject the messages and the same issue happens... The commit refactors the '__tipc_shutdown()' function to only send one 'FIN' in the situation mentioned above. For the connectionless case, it is unavoidable but usually there is no rejections for such socket messages because they are 'dest-droppable' by default. In addition, the new code makes the other socket states clear (e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08tipc: remove meaningless assignment in MakefileMasahiro Yamada1-2/+0
There is no module named tipc_diag. The assignment to tipc_diag-y has no effect. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08tipc: do not add socket.o to tipc-y twiceMasahiro Yamada1-1/+1
net/tipc/Makefile adds socket.o twice. tipc-y += addr.o bcast.o bearer.o \ core.o link.o discover.o msg.o \ name_distr.o subscr.o monitor.o name_table.o net.o \ netlink.o netlink_compat.o node.o socket.o eth_media.o \ ^^^^^^^^ topsrv.o socket.o group.o trace.o ^^^^^^^^ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06tipc: eliminate KMSAN: uninit-value in __tipc_nl_compat_dumpit errorYing Xue1-2/+2
syzbot found the following crash on: ===================================================== BUG: KMSAN: uninit-value in __nlmsg_parse include/net/netlink.h:661 [inline] BUG: KMSAN: uninit-value in nlmsg_parse_deprecated include/net/netlink.h:706 [inline] BUG: KMSAN: uninit-value in __tipc_nl_compat_dumpit+0x553/0x11e0 net/tipc/netlink_compat.c:215 CPU: 0 PID: 12425 Comm: syz-executor062 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108 __msan_warning+0x57/0xa0 mm/kmsan/kmsan_instr.c:245 __nlmsg_parse include/net/netlink.h:661 [inline] nlmsg_parse_deprecated include/net/netlink.h:706 [inline] __tipc_nl_compat_dumpit+0x553/0x11e0 net/tipc/netlink_compat.c:215 tipc_nl_compat_dumpit+0x761/0x910 net/tipc/netlink_compat.c:308 tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline] tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] genl_family_rcv_msg net/netlink/genetlink.c:717 [inline] genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:745 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x444179 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b d8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd2d6409c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000444179 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003 RBP: 00000000006ce018 R08: 0000000000000000 R09: 00000000004002e0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401e20 R13: 0000000000401eb0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline] kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:86 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xe47/0x11f0 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x309/0xa50 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] nlmsg_new include/net/netlink.h:888 [inline] tipc_nl_compat_dumpit+0x6e4/0x910 net/tipc/netlink_compat.c:301 tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline] tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] genl_family_rcv_msg net/netlink/genetlink.c:717 [inline] genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:745 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ===================================================== The complaint above occurred because the memory region pointed by attrbuf variable was not initialized. To eliminate this warning, we use kcalloc() rather than kmalloc_array() to allocate memory for attrbuf. Reported-by: syzbot+b1fd2bf2c89d8407e15f@syzkaller.appspotmail.com Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller4-126/+215
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20tipc: make legacy address flag readable over netlinkJohn Rutherford3-0/+63
To enable iproute2/tipc to generate backwards compatible printouts and validate command parameters for nodes using a <z.c.n> node address, it needs to be able to read the legacy address flag from the kernel. The legacy address flag records the way in which the node identity was originally specified. The legacy address flag is requested by the netlink message TIPC_NL_ADDR_LEGACY_GET. If the flag is set the attribute TIPC_NLA_NET_ADDR_LEGACY is set in the return message. Signed-off-by: John Rutherford <john.rutherford@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17tipc: don't send gap blocks in ACK messagesJon Maloy1-4/+4
In the commit referred to below we eliminated sending of the 'gap' indicator in regular ACK messages, reserving this to explicit NACK ditto. Unfortunately we missed to also eliminate building of the 'gap block' area in ACK messages. This area is meant to report gaps in the received packet sequence following the initial gap, so that lost packets can be retransmitted earlier and received out-of-sequence packets can be released earlier. However, the interpretation of those blocks is dependent on a complete and correct sequence of gaps and acks. Hence, when the initial gap indicator is missing a single gap block will be interpreted as an acknowledgment of all preceding packets. This may lead to packets being released prematurely from the sender's transmit queue, with easily predicatble consequences. We now fix this by not building any gap block area if there is no initial gap to report. Fixes: commit 02288248b051 ("tipc: eliminate gap indicator from ACK messages") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-12net/tipc: Replace rcu_swap_protected() with rcu_replace_pointer()Paul E. McKenney1-4/+1
This commit replaces the use of rcu_swap_protected() with the more intuitively appealing rcu_replace_pointer() as a step towards removing rcu_swap_protected(). Link: https://lore.kernel.org/lkml/CAHk-=wiAsJLw1egFEE=Z7-GGtM6wcvtyytXZA1+BHqta4gg6Hw@mail.gmail.com/ Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> [ paulmck: Updated based on Ying Xue and Tuong Lien Tong feedback. ] Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: <netdev@vger.kernel.org> Cc: <tipc-discussion@lists.sourceforge.net>
2019-12-10tipc: fix use-after-free in tipc_disc_rcv()Tuong Lien1-3/+3
In the function 'tipc_disc_rcv()', the 'msg_peer_net_hash()' is called to read the header data field but after the message skb has been freed, that might result in a garbage value... This commit fixes it by defining a new local variable to store the data first, just like the other header fields' handling. Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10tipc: fix retrans failure due to wrong destinationTuong Lien1-14/+18
When a user message is sent, TIPC will check if the socket has faced a congestion at link layer. If that happens, it will make a sleep to wait for the congestion to disappear. This leaves a gap for other users to take over the socket (e.g. multi threads) since the socket is released as well. Also, in case of connectionless (e.g. SOCK_RDM), user is free to send messages to various destinations (e.g. via 'sendto()'), then the socket's preformatted header has to be updated correspondingly prior to the actual payload message building. Unfortunately, the latter action is done before the first action which causes a condition issue that the destination of a certain message can be modified incorrectly in the middle, leading to wrong destination when that message is built. Consequently, when the message is sent to the link layer, it gets stuck there forever because the peer node will simply reject it. After a number of retransmission attempts, the link is eventually taken down and the retransmission failure is reported. This commit fixes the problem by rearranging the order of actions to prevent the race condition from occurring, so the message building is 'atomic' and its header will not be modified by anyone. Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10tipc: fix potential hanging after b/rcast changingTuong Lien1-9/+15
In commit c55c8edafa91 ("tipc: smooth change between replicast and broadcast"), we allow instant switching between replicast and broadcast by sending a dummy 'SYN' packet on the last used link to synchronize packets on the links. The 'SYN' message is an object of link congestion also, so if that happens, a 'SOCK_WAKEUP' will be scheduled to be sent back to the socket... However, in that commit, we simply use the same socket 'cong_link_cnt' counter for both the 'SYN' & normal payload message sending. Therefore, if both the replicast & broadcast links are congested, the counter will be not updated correctly but overwritten by the latter congestion. Later on, when the 'SOCK_WAKEUP' messages are processed, the counter is reduced one by one and eventually overflowed. Consequently, further activities on the socket will only wait for the false congestion signal to disappear but never been met. Because sending the 'SYN' message is vital for the mechanism, it should be done anyway. This commit fixes the issue by marking the message with an error code e.g. 'TIPC_ERR_NO_PORT', so its sending should not face a link congestion, there is no need to touch the socket 'cong_link_cnt' either. In addition, in the event of any error (e.g. -ENOBUFS), we will purge the entire payload message queue and make a return immediately. Fixes: c55c8edafa91 ("tipc: smooth change between replicast and broadcast") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10tipc: fix name table rbtree issuesTuong Lien1-100/+179
The current rbtree for service ranges in the name table is built based on the 'lower' & 'upper' range values resulting in a flaw in the rbtree searching. Some issues have been observed in case of range overlapping: Case #1: unable to withdraw a name entry: After some name services are bound, all of them are withdrawn by user but one remains in the name table forever. This corrupts the table and that service becomes dummy i.e. no real port. E.g. / {22, 22} / / ---> {10, 50} / \ / \ {10, 30} {20, 60} The node {10, 30} cannot be removed since the rbtree searching stops at the node's ancestor i.e. {10, 50}, so starting from it will never reach the finding node. Case #2: failed to send data in some cases: E.g. Two service ranges: {20, 60}, {10, 50} are bound. The rbtree for this service will be one of the two cases below depending on the order of the bindings: {20, 60} {10, 50} <-- / \ / \ / \ / \ {10, 50} NIL <-- NIL {20, 60} (a) (b) Now, try to send some data to service {30}, there will be two results: (a): Failed, no route to host. (b): Ok. The reason is that the rbtree searching will stop at the pointing node as shown above. Case #3: Same as case #2b above but if the data sending's scope is local and the {10, 50} is published by a peer node, then it will result in 'no route to host' even though the other {20, 60} is for example on the local node which should be able to get the data. The issues are actually due to the way we built the rbtree. This commit fixes it by introducing an additional field to each node - named 'max', which is the largest 'upper' of that node subtree. The 'max' value for each subtrees will be propagated correctly whenever a node is inserted/ removed or the tree is rebalanced by the augmented rbtree callbacks. By this way, we can change the rbtree searching appoarch to solve the issues above. Another benefit from this is that we can now improve the searching for a next range matching e.g. in case of multicast, so get rid of the unneeded looping over all nodes in the tree. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10tipc: introduce variable window congestion controlJon Maloy9-79/+160
We introduce a simple variable window congestion control for links. The algorithm is inspired by the Reno algorithm, covering both 'slow start', 'congestion avoidance', and 'fast recovery' modes. - We introduce hard lower and upper window limits per link, still different and configurable per bearer type. - We introduce a 'slow start theshold' variable, initially set to the maximum window size. - We let a link start at the minimum congestion window, i.e. in slow start mode, and then let is grow rapidly (+1 per rceived ACK) until it reaches the slow start threshold and enters congestion avoidance mode. - In congestion avoidance mode we increment the congestion window for each window-size number of acked packets, up to a possible maximum equal to the configured maximum window. - For each non-duplicate NACK received, we drop back to fast recovery mode, by setting the both the slow start threshold to and the congestion window to (current_congestion_window / 2). - If the timeout handler finds that the transmit queue has not moved since the previous timeout, it drops the link back to slow start and forces a probe containing the last sent sequence number to the sent to the peer, so that this can discover the stale situation. This change does in reality have effect only on unicast ethernet transport, as we have seen that there is no room whatsoever for increasing the window max size for the UDP bearer. For now, we also choose to keep the limits for the broadcast link unchanged and equal. This algorithm seems to give a 50-100% throughput improvement for messages larger than MTU. Suggested-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10tipc: eliminate more unnecessary nacks and retransmissionsJon Maloy1-1/+5
When we increase the link tranmsit window we often observe the following scenario: 1) A STATE message bypasses a sequence of traffic packets and arrives far ahead of those to the receiver. STATE messages contain a 'peers_nxt_snt' field to indicate which was the last packet sent from the peer. This mechanism is intended as a last resort for the receiver to detect missing packets, e.g., during very low traffic when there is no packet flow to help early loss detection. 3) The receiving link compares the 'peer_nxt_snt' field to its own 'rcv_nxt', finds that there is a gap, and immediately sends a NACK message back to the peer. 4) When this NACKs arrives at the sender, all the requested retransmissions are performed, since it is a first-time request. Just like in the scenario described in the previous commit this leads to many redundant retransmissions, with decreased throughput as a consequence. We fix this by adding two more conditions before we send a NACK in this sitution. First, the deferred queue must be empty, so we cannot assume that the potential packet loss has already been detected by other means. Second, we check the 'peers_snd_nxt' field only in probe/ probe_reply messages, thus turning this into a true mechanism of last resort as it was really meant to be. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10tipc: eliminate gap indicator from ACK messagesJon Maloy1-5/+9
When we increase the link send window we sometimes observe the following scenario: 1) A packet #N arrives out of order far ahead of a sequence of older packets which are still under way. The packet is added to the deferred queue. 2) The missing packets arrive in sequence, and for each 16th of them an ACK is sent back to the receiver, as it should be. 3) When building those ACK messages, it is checked if there is a gap between the link's 'rcv_nxt' and the first packet in the deferred queue. This is always the case until packet number #N-1 arrives, and a 'gap' indicator is added, effectively turning them into NACK messages. 4) When those NACKs arrive at the sender, all the requested retransmissions are done, since it is a first-time request. This sometimes leads to a huge amount of redundant retransmissions, causing a drop in max throughput. This problem gets worse when we in a later commit introduce variable window congestion control, since it drops the link back to 'fast recovery' much more often than necessary. We now fix this by not sending any 'gap' indicator in regular ACK messages. We already have a mechanism for sending explicit NACKs in place, and this is sufficient to keep up the packet flow. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06tipc: fix ordering of tipc module init and exit routineTaehee Yoo1-14/+15
In order to set/get/dump, the tipc uses the generic netlink infrastructure. So, when tipc module is inserted, init function calls genl_register_family(). After genl_register_family(), set/get/dump commands are immediately allowed and these callbacks internally use the net_generic. net_generic is allocated by register_pernet_device() but this is called after genl_register_family() in the __init function. So, these callbacks would use un-initialized net_generic. Test commands: #SHELL1 while : do modprobe tipc modprobe -rv tipc done #SHELL2 while : do tipc link list done Splat looks like: [ 59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled [ 59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194 [ 59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc] [ 59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00 [ 59.622550][ T2780] NET: Registered protocol family 30 [ 59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202 [ 59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907 [ 59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149 [ 59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1 [ 59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40 [ 59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328 [ 59.624639][ T2788] FS: 00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000 [ 59.624645][ T2788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 59.625875][ T2780] tipc: Started in single node mode [ 59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0 [ 59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 59.636478][ T2788] Call Trace: [ 59.637025][ T2788] tipc_nl_add_bc_link+0x179/0x1470 [tipc] [ 59.638219][ T2788] ? lock_downgrade+0x6e0/0x6e0 [ 59.638923][ T2788] ? __tipc_nl_add_link+0xf90/0xf90 [tipc] [ 59.639533][ T2788] ? tipc_nl_node_dump_link+0x318/0xa50 [tipc] [ 59.640160][ T2788] ? mutex_lock_io_nested+0x1380/0x1380 [ 59.640746][ T2788] tipc_nl_node_dump_link+0x4fd/0xa50 [tipc] [ 59.641356][ T2788] ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc] [ 59.642088][ T2788] ? __skb_ext_del+0x270/0x270 [ 59.642594][ T2788] genl_lock_dumpit+0x85/0xb0 [ 59.643050][ T2788] netlink_dump+0x49c/0xed0 [ 59.643529][ T2788] ? __netlink_sendskb+0xc0/0xc0 [ 59.644044][ T2788] ? __netlink_dump_start+0x190/0x800 [ 59.644617][ T2788] ? __mutex_unlock_slowpath+0xd0/0x670 [ 59.645177][ T2788] __netlink_dump_start+0x5a0/0x800 [ 59.645692][ T2788] genl_rcv_msg+0xa75/0xe90 [ 59.646144][ T2788] ? __lock_acquire+0xdfe/0x3de0 [ 59.646692][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.647340][ T2788] ? genl_lock_dumpit+0xb0/0xb0 [ 59.647821][ T2788] ? genl_unlock+0x20/0x20 [ 59.648290][ T2788] ? genl_parallel_done+0xe0/0xe0 [ 59.648787][ T2788] ? find_held_lock+0x39/0x1d0 [ 59.649276][ T2788] ? genl_rcv+0x15/0x40 [ 59.649722][ T2788] ? lock_contended+0xcd0/0xcd0 [ 59.650296][ T2788] netlink_rcv_skb+0x121/0x350 [ 59.650828][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.651491][ T2788] ? netlink_ack+0x940/0x940 [ 59.651953][ T2788] ? lock_acquire+0x164/0x3b0 [ 59.652449][ T2788] genl_rcv+0x24/0x40 [ 59.652841][ T2788] netlink_unicast+0x421/0x600 [ ... ] Fixes: 7e4369057806 ("tipc: fix a slab object leak") Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookupSabrina Dubroca1-3/+6
ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28tipc: fix duplicate SYN messages under link congestionTung Nguyen1-7/+10
Scenario: 1. A client socket initiates a SYN message to a listening socket. 2. The send link is congested, the SYN message is put in the send link and a wakeup message is put in wakeup queue. 3. The congestion situation is abated, the wakeup message is pulled out of the wakeup queue. Function tipc_sk_push_backlog() is called to send out delayed messages by Nagle. However, the client socket is still in CONNECTING state. So, it sends the SYN message in the socket write queue to the listening socket again. 4. The listening socket receives the first SYN message and creates first server socket. The client socket receives ACK- and establishes a connection to the first server socket. The client socket closes its connection with the first server socket. 5. The listening socket receives the second SYN message and creates second server socket. The second server socket sends ACK- to the client socket, but it has been closed. It results in connection reset error when reading from the server socket in user space. Solution: return from function tipc_sk_push_backlog() immediately if there is pending SYN message in the socket write queue. Fixes: c0bceb97db9e ("tipc: add smart nagle feature") Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28tipc: fix wrong timeout input for tipc_wait_for_cond()Tung Nguyen1-1/+1
In function __tipc_shutdown(), the timeout value passed to tipc_wait_for_cond() is not jiffies. This commit fixes it by converting that value from milliseconds to jiffies. Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28tipc: fix wrong socket reference counter after tipc_sk_timeout() returnsTung Nguyen1-0/+1
When tipc_sk_timeout() is executed but user space is grabbing ownership, this function rearms itself and returns. However, the socket reference counter is not reduced. This causes potential unexpected behavior. This commit fixes it by calling sock_put() before tipc_sk_timeout() returns in the above-mentioned case. Fixes: afe8792fec69 ("tipc: refactor function tipc_sk_timeout()") Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28tipc: fix potential memory leak in __tipc_sendmsg()Tung Nguyen1-1/+3
When initiating a connection message to a server side, the connection message is cloned and added to the socket write queue. However, if the cloning is failed, only the socket write queue is purged. It causes memory leak because the original connection message is not freed. This commit fixes it by purging the list of connection message when it cannot be cloned. Fixes: 6787927475e5 ("tipc: buffer overflow handling in listener socket") Reported-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-26tipc: fix link name length checkJohn Rutherford1-2/+2
In commit 4f07b80c9733 ("tipc: check msg->req data len in tipc_nl_compat_bearer_disable") the same patch code was copied into routines: tipc_nl_compat_bearer_disable(), tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats(). The two link routine occurrences should have been modified to check the maximum link name length and not bearer name length. Fixes: 4f07b80c9733 ("tipc: check msg->reg data len in tipc_nl_compat_bearer_disable") Signed-off-by: John Rutherford <john.rutherford@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-23net: use rhashtable_lookup() instead of rhashtable_lookup_fast()Taehee Yoo1-1/+1
rhashtable_lookup_fast() internally calls rcu_read_lock() then, calls rhashtable_lookup(). So if rcu_read_lock() is already held, rhashtable_lookup() is enough. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22tipc: support in-order name publication eventsTuong Lien2-8/+47
It is observed that TIPC service binding order will not be kept in the publication event report to user if the service is subscribed after the bindings. For example, services are bound by application in the following order: Server: bound port A to {18888,66,66} scope 2 Server: bound port A to {18888,33,33} scope 2 Now, if a client subscribes to the service range (e.g. {18888, 0-100}), it will get the 'TIPC_PUBLISHED' events in that binding order only when the subscription is started before the bindings. Otherwise, if started after the bindings, the events will arrive in the opposite order: Client: received event for published {18888,33,33} Client: received event for published {18888,66,66} For the latter case, it is clear that the bindings have existed in the name table already, so when reported, the events' order will follow the order of the rbtree binding nodes (- a node with lesser 'lower'/'upper' range value will be first). This is correct as we provide the tracking on a specific service status (available or not), not the relationship between multiple services. However, some users expect to see the same order of arriving events irrespective of when the subscription is issued. This turns out to be easy to fix. We now add functionality to ensure that publication events always are issued in the same temporal order as the corresponding bindings were performed. v2: replace the unnecessary macro - 'publication_after()' with inline function. v3: reuse 'time_after32()' instead of reinventing the same exact code. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22tipc: update replicast capability for broadcast send linkHoang Le4-5/+11
When setting up a cluster with non-replicast/replicast capability supported. This capability will be disabled for broadcast send link in order to be backwards compatible. However, when these non-support nodes left and be removed out the cluster. We don't update this capability on broadcast send link. Then, some of features that based on this capability will also disabling as unexpected. In this commit, we make sure the broadcast send link capabilities will be re-calculated as soon as a node removed/rejoined a cluster. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-2/+6
Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14tipc: add back tipc prefix to log messagesMatt Bennett2-2/+6
The tipc prefix for log messages generated by tipc was removed in commit 07f6c4bc048a ("tipc: convert tipc reference table to use generic rhashtable"). This is still a useful prefix so add it back. Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12tipc: update mon's self addr when node addr generatedHoang Le3-0/+18
In commit 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values"), the 32-bit node address only generated after one second trial period expired. However the self's addr in struct tipc_monitor do not update according to node address generated. This lead to it is always zero as initial value. As result, sorting algorithm using this value does not work as expected, neither neighbor monitoring framework. In this commit, we add a fix to update self's addr when 32-bit node address generated. Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11tipc: fix update of the uninitialized variable errColin Ian King1-1/+1
Variable err is not uninitialized and hence can potentially contain any garbage value. This may cause an error when logical or'ing the return values from the calls to functions crypto_aead_setauthsize or crypto_aead_setkey. Fix this by setting err to the return of crypto_aead_setauthsize rather than or'ing in the return into the uninitialized variable Addresses-Coverity: ("Uninitialized scalar variable") Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08tipc: add support for AEAD key setting via netlinkTuong Lien3-1/+156
This commit adds two netlink commands to TIPC in order for user to be able to set or remove AEAD keys: - TIPC_NL_KEY_SET - TIPC_NL_KEY_FLUSH When the 'KEY_SET' is given along with the key data, the key will be initiated and attached to TIPC crypto. On the other hand, the 'KEY_FLUSH' command will remove all existing keys if any. Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08tipc: introduce TIPC encryption & authenticationTuong Lien17-46/+2385
This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08tipc: enable creating a "preliminary" nodeTuong Lien2-27/+73
When user sets RX key for a peer not existing on the own node, a new node entry is needed to which the RX key will be attached. However, since the peer node address (& capabilities) is unknown at that moment, only the node-ID is provided, this commit allows the creation of a node with only the data that we call as “preliminary”. A preliminary node is not the object of the “tipc_node_find()” but the “tipc_node_find_by_id()”. Once the first message i.e. LINK_CONFIG comes from that peer, and is successfully decrypted by the own node, the actual peer node data will be properly updated and the node will function as usual. In addition, the node timer always starts when a node object is created so if a preliminary node is not used, it will be cleaned up. The later encryption functions will also use the node timer and be able to create a preliminary node automatically when needed. Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08tipc: add reference counter to bearerTuong Lien2-1/+16
As a need to support the crypto asynchronous operations in the later commits, apart from the current RCU mechanism for bearer pointer, we add a 'refcnt' to the bearer object as well. So, a bearer can be hold via 'tipc_bearer_hold()' without being freed even though the bearer or interface can be disabled in the meanwhile. If that happens, the bearer will be released then when the crypto operation is completed and 'tipc_bearer_put()' is called. Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07tipc: eliminate checking netns if node establishedHoang Le1-9/+5
Currently, we scan over all network namespaces at each received discovery message in order to check if the sending peer might be present in a host local namespaces. This is unnecessary since we can assume that a peer will not change its location during an established session. We now improve the condition for this testing so that we don't perform any redundant scans. Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06tipc: eliminate the dummy packet in link synchingTuong Lien1-15/+14
When preparing tunnel packets for the link failover or synchronization, as for the safe algorithm, we added a dummy packet on the pair link but never sent it out. In the case of failover, the pair link will be reset anyway. But for link synching, it will always result in retransmission of the dummy packet after that. We have also observed that such the retransmission at the early stage when a new node comes in a large cluster will take some time and hard to be done, leading to the repeated retransmit failures and the link is reset. Since in commit 4929a932be33 ("tipc: optimize link synching mechanism") we have already built a dummy 'TUNNEL_PROTOCOL' message on the new link for the synchronization, there's no need for the dummy on the pair one, this commit will skip it when the new mechanism takes in place. In case nothing exists in the pair link's transmq, the link synching will just start and stop shortly on the peer side. The patch is backward compatible. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Tested-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06tipc: reduce sensitive to retransmit failuresHoang Le1-1/+1
With huge cluster (e.g >200nodes), the amount of that flow: gap -> retransmit packet -> acked will take time in case of STATE_MSG dropped/delayed because a lot of traffic. This lead to 1.5 sec tolerance value criteria made link easy failure around 2nd, 3rd of failed retransmission attempts. Instead of re-introduced criteria of 99 faled retransmissions to fix the issue, we increase failure detection timer to ten times tolerance value. Fixes: 77cf8edbc0e7 ("tipc: simplify stale link failure criteria") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Jon Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06tipc: update cluster capabilities if node deletedHoang Le1-1/+11
There are two improvements when re-calculate cluster capabilities: - When deleting a specific down node, need to re-calculate. - In tipc_node_cleanup(), do not need to re-calculate if node is still existing in cluster. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Jon Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 02:08:20 +0000