summaryrefslogtreecommitdiffstats
path: root/net/tipc
AgeCommit message (Collapse)AuthorFilesLines
2011-05-10tipc: Revise timings used when sending link request messagesAllan Stephens1-30/+36
Revises the algorithm governing the sending of link request messages to take into account the number of nodes each bearer is currently in contact with, and to ensure more rapid rediscovery of neighboring nodes if a bearer fails and then recovers. The discovery object now sends requests at least once a second if it is not in contact with any other nodes, and at least once a minute if it has at least one neighbor; if contact with the only neighbor is lost, the object immediately reverts to its initial rapid-fire search timing to accelerate the rediscovery process. In addition, the discovery object now stops issuing link request messages if it is in contact with the only neighboring node it is configured to communicate with, since further searching is unnecessary. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Add monitoring of number of nodes discovered by bearerAllan Stephens3-8/+31
Augments TIPC's discovery object to track the number of neighboring nodes having an active link to the associated bearer. This means tipc_disc_update_link_req() becomes either one of: tipc_disc_add_dest() or: tipc_disc_remove_dest() depending on the code flow direction of things. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Enhance sending of discovery object link request messagesAllan Stephens1-1/+13
Augments TIPC's discovery object to send its initial neighbor discovery request message as soon as the associated bearer is created, rather than waiting for its first periodic timeout to occur, thereby speeding up the discovery process. Also adds a check to suppress the initial request or subsequent requests if the bearer is blocked at the time the request is scheduled for transmission. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Enhance handling of discovery object creation failuresAllan Stephens3-41/+42
Modifies bearer creation and deletion code to improve handling of scenarios when a neighbor discovery object cannot be created. The creation routine now aborts the creation of a bearer if its discovery object cannot be created, and deletes the newly created bearer, rather than failing quietly and leaving an unusable bearer hanging around. Since the exit via the goto label really isn't a definitive failure in all cases, relabel it appropriately. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Introduce routine to enqueue a chain of messages on link tx queueAllan Stephens1-16/+22
Create a helper routine to enqueue a chain of sk_buffs to a link's transmit queue. It improves readability and the new function is anticipated to be used more than just once in the future as well. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Avoid recomputation of outgoing message lengthAllan Stephens8-66/+64
Rework TIPC's message sending routines to take advantage of the total amount of data value passed to it by the kernel socket infrastructure. This change eliminates the need for TIPC to compute the size of outgoing messages itself, as well as the check for an oversize message in tipc_msg_build(). In addition, this change warrants an explanation: - res = send_packet(NULL, sock, &my_msg, 0); + res = send_packet(NULL, sock, &my_msg, bytes_to_send); Previously, the final argument to send_packet() was ignored (since the amount of data being sent was recalculated by a lower-level routine) and we could just pass in a dummy value (0). Now that the recalculation is being eliminated, the argument value being passed to send_packet() is significant and we have to supply the actual amount of data we want to send. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Abort excessive send requests as early as possibleAllan Stephens1-0/+13
Adds checks to TIPC's socket send routines to promptly detect and abort attempts to send more than 66,000 bytes in a single TIPC message or more than 2**31-1 bytes in a single TIPC byte stream request. In addition, this ensures that the number of iovecs in a send request does not exceed the limits of a standard integer variable. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Strengthen checks for neighboring node discoveryAllan Stephens2-4/+14
Enhances existing checks on the discovery domain associated with a TIPC bearer. A bearer can no longer be configured to accept links from itself only (which would be pointless), or to nodes outside its own cluster (since multi-cluster support has now been removed from TIPC). Also, the neighbor discovery routine now validates link setup requests against the configured discovery domain for the bearer, rather than simply ensuring the requesting node belongs to the node's own cluster. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: make zone/cluster mask constants a definePaul Gortmaker1-2/+5
This allows them to be available for easy re-use in other places and avoids trivial mistakes caused by "count the f's and 0's". Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Fix sk_buff leaks when link congestion is detectedAllan Stephens2-7/+4
Modifies a TIPC send routine that did not discard the outgoing sk_buff if it was not transmitted because of link congestion; this eliminates the potential for buffer leakage in the many callers who did not clean up the unsent buffer. (The two routines that previously did discard the unsent buffer have been updated to eliminate their now-redundant clean up.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Update destination node field on incoming multicast messagesAllan Stephens1-0/+1
Sets the destination node field of an incoming multicast message to the receiving node's network address before handing off the message to each receiving port. This ensures that, in the event the destination port returns the message to the sender, the sender can identify which node the destination port belonged to. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Fix problem with bundled multicast messageAllan Stephens1-0/+2
Set the destination node and destination port fields of an outgoing multicast message header to zero; this is necessary to ensure that the receiving node can route the message properly if it was packed into a bundle due to link congestion. (Previously, there was a chance that the receiving node would send the unbundled message to a random node & port, rather than processing the message itself.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Set name lookup scope field properly in all data messagesAllan Stephens1-0/+3
Ensures that all outgoing data messages have the "name lookup scope" field of their header set correctly; that is, named multicast messages now specify cluster-wide name lookup, while messages not using TIPC naming zero out the lookup field. (Previously, the lookup scope specified for these types of messages was inherited from the last message sent by the sending port.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Fix issues with fragmentation of an existing message bufferAllan Stephens1-14/+23
Modifies the routine that fragments an existing message buffer to use similar logic to that used when generating fragments from an iovec. The routine now creates a complete chain of fragments and adds them to the link transmit queue as a unit, so that the link sends all fragments or none; this prevents the incomplete transmission of a fragmented message that might otherwise result because of link congestion or memory exhaustion. This change also ensures that the counter recording the number of fragmented messages sent by the link is now incremented only if the message is actually sent. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Avoid pointless masking of fragmented message identifierAllan Stephens1-2/+2
Eliminates code that restricts a link's counter of its fragmented messages to a 16-bit value, since the counter value is automatically restricted to this range when it is written into the message header. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Don't initialize link selector field in fragmented messagesAllan Stephens1-2/+0
Eliminates code that sets the link selector field in the header of fragmented messages, since this information is never referenced. (The unnecessary initialization was harmless as it was over-written by the fragmented message identifier value before the fragments were transmitted.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Remove code to emulate loss of broadcast messagesAllan Stephens1-18/+0
Eliminates optional code used to test TIPC's ability to recover from lost broadcast messages. This code duplicates functionality already provided by the network stack's QoS option "network emulator". Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Cosmetic consolidation of internal message type definitionsAllan Stephens1-29/+29
Half of the #define entries in msg.h were down at the bottom of the header, instead of up at the top before any of the static inlines etc. Relocate them up to the top, to be consistent with the other normal linux header file layout conventions. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Eliminate unused routing message definitionsAllan Stephens1-9/+0
Gets rid of unused constants defining the types used in routing messages. These messages no longer exist in TIPC now that multicluster and multizone support has been eliminated. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Update comments in message header include fileAllan Stephens1-66/+23
Removes comments in TIPC's message header include file that are outdated and/or unnecessary. Also introduces short comments (or supplements existing ones) to better describe several set of existing symbolic constants. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10tipc: Drop __TIME__ usageMichal Marek1-2/+1
The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Signed-off-by: Michal Marek <mmarek@suse.cz> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: netdev@vger.kernel.org Cc: tipc-discussion@lists.sourceforge.net Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-31Fix common misspellingsLucas De Marchi2-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-14tipc: delete extra semicolon blocking node deletionPaul Gortmaker1-1/+1
Remove bogus semicolon only recently introduced in 34e46258cb9f5 that blocks cleanup of nodes for N>1 on shutdown. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Eliminate obsolete routine for handling routed messagesAllan Stephens3-16/+0
Eliminates a routine that is used in handling messages arriving from another cluster or zone. Such messages can no longer be received by TIPC now that multi-cluster and multi-zone network support has been eliminated. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Eliminate remaining support for routing table messagesAllan Stephens3-46/+4
Gets rid of all remaining code relating to ROUTE_DISTRIBUTOR messages. These messages were only used in multi-cluster and multi-zone networks, which TIPC no longer supports. (For safety, TIPC now treats such messages the same way that it handles other unrecognized messages.) Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Remove bearer flag indicating existence of broadcast addressAllan Stephens2-7/+2
Eliminates the flag in the TIPC bearer structure that indicates if the bearer supports broadcasting, since the flag is always set to 1 and serves no useful purpose. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Don't respond to neighbor discovery request on blocked bearerAllan Stephens1-1/+1
Adds a check to prevent TIPC from trying to respond to an incoming LINK_CONFIG request message if the associated bearer is currently prohibited from sending messages. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Eliminate unnecessary constant for neighbor discovery msg sizeAllan Stephens2-3/+2
Eliminates an unnecessary constant that defines the size of a LINK_CONFIG message, and uses one of the existing standard message size symbols in its place. (The defunct constant was located in the wrong place anyway, since it was grouped with other constants that define message users instead of message sizes.) Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Remove unused field in bearer structureAllan Stephens2-3/+0
Eliminates a field in TIPC's bearer objects that is set, but never referenced. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Correct misnamed references to neighbor discovery domainAllan Stephens3-9/+9
Renames items that are improperly labelled as "network scope" items (which are represented by simple integer values) rather than "network domain" items (which are represented by <Z.C.N>-type network addresses). This change is purely cosmetic, and does not affect the operation of TIPC. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Optimizations to link creation codeAllan Stephens5-36/+28
Enhances link creation code as follows: 1) Detects illegal attempts to add a requested link earlier in the link creation process. This prevents TIPC from wasting time initializing a link object it then throws away, and also eliminates the code needed to do the throwing away. 2) Passes in the node object associated with the requested link. This allows TIPC to eliminate a search to locate the node object, as well as code that attempted to create the node if it doesn't exist. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Give Tx of discovery responses priority over link messagesAllan Stephens1-7/+9
Delay releasing the node lock when processing a neighbor discovery message until after the optional discovery response message has been sent. This helps ensure that any link protocol messages sent by a link endpoint created as a result of a neighbor discovery request are received after the discovery response is received, thereby giving the receiving node a chance to create a peer link endpoint to consume those link protocol messages, if one does not already exist. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Cosmetic changes to neighbor discovery logicAllan Stephens1-44/+59
Reworks the appearance of the routine that processes incoming LINK_CONFIG messages to keep the main logic flow at a consistent level of indentation, and to add comments outlining the various phases involved in processing each message. This rework is being done to allow upcoming enhancements to this routine to be integrated more cleanly. The diff isn't really readable, so know that it was a case of the old code being like: tipc_disc_recv_msg(..) { if (in_own_cluster(orig)) { ... lines and lines of stuff ... } } which is now replaced with the more sane: tipc_disc_recv_msg(..) { if (!in_own_cluster(orig)) return; ... lines and lines of stuff ... } Instances of spin locking within the reindented block were replaced with the identical tipc_node_[un]lock() abstractions. Note that all these changes are cosmetic in nature, and do not change the way LINK_CONFIG messages are processed. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Fix redundant link field handling in link protocol messageAllan Stephens1-1/+3
Ensures that the "redundant link exists" field of the LINK_PROTOCOL messages sent by a link endpoint is set if and only if the sending node has at least one other working link to the peer node. Previously, the bit was set only if there were at least 2 working links to the peer node, meaning the bit was incorrectly left unset in messages sent by a non-working link endpoint when exactly one alternate working link was available. The revised code now takes the state of the link sending the message into account when deciding if an alternate link exists. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: make msg_set_redundant_link() consistent with other set opsAllan Stephens2-11/+3
All the other boolean like msg_set_X(m) operations don't export both a msg_set_X(a) and a msg_clear_X(m), but instead just have the single msg_set_X(m, val) variant. Make the redundant_link one consistent by having the set take a value, and delete the msg_clear_redundant_link() anomoly. This is a cosmetic change and should not change behaviour. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: cosmetic - function names are not to be full sentencesPaul Gortmaker4-9/+9
Function names like "tipc_node_has_redundant_links" are unweildy and result in long lines even for simple lines. The "has" doesn't contribute any value add, so dropping that is a slight step in the right direction. This is a cosmetic change, basic result of: for i in `grep -l tipc_node_has_ *` ; do sed -i s/tipc_node_has_/tipc_node_/ $i ; done Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Eliminate timestamp from link protocol messagesAllan Stephens3-12/+0
Removes support for the timestamp field of TIPC's link protocol messages. This field was previously used to hold an OS-dependent timestamp value that was used to assist in debugging early versions of TIPC. The field has now been deemed unnecessary and has been removed from the latest TIPC specification. This change has no impact on the operation of TIPC since the field was set by TIPC, but never referenced. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: manually inline net_start/stop, make assoc. vars staticAllan Stephens3-23/+6
Relocates network-related variables into the subsystem files where they are now primarily used (following the recent rework of TIPC's node table), and converts globals into locals where possible. Changes the initialization of tipc_num_links from run-time to compile-time, and eliminates the net_start routine that becomes empty as a result. Also eliminates the corresponding net_stop routine by moving its (trivial) content into the one location that called the routine. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Convert node object array to a hash tableAllan Stephens5-55/+70
Replaces the dynamically allocated array of pointers to the cluster's node objects with a static hash table. Hash collisions are resolved using chaining, with a typical hash chain having only a single node, to avoid degrading performance during processing of incoming packets. The conversion to a hash table reduces the memory requirements for TIPC's node table to approximately the same size it had prior to the previous commit. In addition to the hash table itself, TIPC now also maintains a linked list for the node objects, sorted by ascending network address. This list allows TIPC to continue sending responses to user space applications that request node and link information in sorted order. The list also improves performance when name table update messages are sent by making it easier to identify the nodes that must be notified. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Eliminate configuration for maximum number of cluster nodesAllan Stephens6-55/+7
Gets rid of the need for users to specify the maximum number of cluster nodes supported by TIPC. TIPC now automatically provides support for all 4K nodes allowed by its addressing scheme. Note: This change sets TIPC's memory usage to the amount used by a maximum size node table with 4K entries. An upcoming patch that converts the node table from a linear array to a hash table will compact the node table to a more efficient design, but for clarity it is nice to have all the Kconfig infrastruture go away separately. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Split up unified structure of network-related variablesAllan Stephens5-42/+33
Converts the fields of the global "tipc_net" structure into individual variables. Since the struct was never referenced as a complete unit, its existence was pointless. This will facilitate upcoming changes to TIPC's node table and simpify upcoming relocation of the variables so they are only visible to the files that actually use them. This change is essentially cosmetic in nature, and doesn't affect the operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Fix problem with missing link in "tipc-config -l" outputAllan Stephens3-6/+8
Removes a race condition that could cause TIPC's internal counter of the number of links it has to neighboring nodes to have the incorrect value if two independent threads of control simultaneously create new link endpoints connecting to two different nodes using two different bearers. Such under counting would result in TIPC failing to list the final link(s) in its response to a configuration request to list all of the node's links. The counter is now updated atomically to ensure that simultaneous increments do not interfere with each other. Thanks go to Peter Butler <pbutler@pt.com> for his assistance in diagnosing and fixing this problem. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Add support for SO_RCVTIMEO socket optionAllan Stephens1-15/+17
Adds support for the SO_RCVTIMEO socket option to TIPC's socket receive routines. Thanks go out to Raj Hegde <rajenhegde@yahoo.ca> for his contribution to the development and testing this enhancement. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Cosmetic changes to node subscription codeAllan Stephens4-13/+27
Relocates the code that notifies users of node subscriptions so that it is adjacent to the rest of the routines that implement TIPC's node subscription capability. Renames the name table routine that is invoked by a node subscription to better reflect its purpose and to be consistent with other, similar name table routines. These changes are cosmetic in nature, and do not alter the behavior of TIPC. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Prevent null pointer error when removing a node subscriptionAllan Stephens2-8/+10
Prevents a null pointer dereference from occurring if a node subscription is triggered at the same time that the subscribing port or publication is terminating the subscription. The problem arises if the triggering routine asynchronously activates and deregisters the node subscription while deregistration is already underway -- the deregistration routine may find that the pointer it has just verified to be non-NULL is now NULL. To avoid this race condition the triggering routine now simply marks the node subscription as defunct (to prevent it from re-activating) instead of deregistering it. The subscription is now both deregistered and destroyed only when the subscribing port or publication code terminates the node subscription. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Add network address mask helper routinesAllan Stephens3-7/+16
Introduces a pair of helper routines that convert the network address for a TIPC node into the network address for its cluster or zone. This is a cosmetic change designed to avoid future errors caused by the incorrect use of address bitmasks, and does not alter the existing operation of TIPC. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Correct broadcast link peer info when displaying linksAllan Stephens1-1/+1
Fixes a typo in the calculation of the network address of a node's own cluster when generating a response to the configuration command that lists all of the node's links. The correct mask value for a <Z.C.N> network address uses 1's for the 8-bit zone and 12-bit cluster parts and 0's for the 12-bit node part. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13tipc: Allow receiving into iovec containing multiple entriesAllan Stephens1-23/+15
Enhances TIPC's socket receive routines to support iovec structures containing more than a single entry. This change leverages existing sk_buff routines to do most of the work; the only significant change to TIPC itself is that an sk_buff now records how much data has been already consumed as an numeric offset, rather than as a pointer to the first unread data byte. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Avoid reliable broadcast preparation for NACK messagesAllan Stephens1-0/+1
Enhance TIPC to skip unnecessary (and, in some cases, redundant) preparation work when sending a broadcast link NACK message, since this preparation is only required for broadcast messages that are sent in a reliable manner. This change also fixes a bug that caused NACK messages to be improperly counted as "TX packets" in TIPC's broadcast link statistics. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Remove unused message header field for requested number of linksAllan Stephens5-22/+5
Eliminates support for the "number of requested links" field in a neighbor discovery message. This field was never used and has been removed from the TIPC 2.0 protocol specification. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>