summaryrefslogtreecommitdiffstats
path: root/net/sunrpc
AgeCommit message (Collapse)AuthorFilesLines
2008-10-14Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linuxLinus Torvalds8-207/+989
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: (59 commits) svcrdma: Fix IRD/ORD polarity svcrdma: Update svc_rdma_send_error to use DMA LKEY svcrdma: Modify the RPC reply path to use FRMR when available svcrdma: Modify the RPC recv path to use FRMR when available svcrdma: Add support to svc_rdma_send to handle chained WR svcrdma: Modify post recv path to use local dma key svcrdma: Add a service to register a Fast Reg MR with the device svcrdma: Query device for Fast Reg support during connection setup svcrdma: Add FRMR get/put services NLM: Remove unused argument from svc_addsock() function NLM: Remove "proto" argument from lockd_up() NLM: Always start both UDP and TCP listeners lockd: Remove unused fields in the nlm_reboot structure lockd: Add helper to sanity check incoming NOTIFY requests lockd: change nlmclnt_grant() to take a "struct sockaddr *" lockd: Adjust nlmsvc_lookup_host() to accomodate AF_INET6 addresses lockd: Adjust nlmclnt_lookup_host() signature to accomodate non-AF_INET lockd: Support non-AF_INET addresses in nlm_lookup_host() NLM: Convert nlm_lookup_host() to use a single argument svcrdma: Add Fast Reg MR Data Types ...
2008-10-13net: Rationalise email address: Network Specific PartsAlan Cox1-2/+2
Clean up the various different email addresses of mine listed in the code to a single current and valid address. As Dave says his network merges for 2.6.28 are now done this seems a good point to send them in where they won't risk disrupting real changes. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08Merge branch 'from-tomtucker' into for-2.6.28J. Bruce Fields3-122/+684
2008-10-06svcrdma: Fix IRD/ORD polarityTom Tucker1-1/+1
The inititator/responder resources in the event have been swapped. They no represent what the local peer would set their values to in order to match the peer. Note that iWARP does not exchange these on the wire and the provider is simply putting in the local device max. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Update svc_rdma_send_error to use DMA LKEYTom Tucker1-2/+9
Update the svc_rdma_send_error code to use the DMA LKEY which is valid regardless of the memory registration strategy in use. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Modify the RPC reply path to use FRMR when availableTom Tucker2-40/+217
Use FRMR to map local RPC reply data. This allows RDMA_WRITE to send reply data using a single WR. The FRMR is invalidated by linking the LOCAL_INV WR to the RDMA_SEND message used to complete the reply. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Modify the RPC recv path to use FRMR when availableTom Tucker2-22/+170
RPCRDMA requests that specify a read-list are fetched with RDMA_READ. Using an FRMR to map the data sink improves NFSRDMA security on transports that place the RDMA_READ data sink LKEY on the wire because the valid lifetime of the MR is only the duration of the RDMA_READ. The LKEY is invalidated when the last RDMA_READ WR completes. Mapping the data sink also allows for very large amounts to data to be fetched with a single WR, so if the client is also using FRMR, the entire RPC read-list can be fetched with a single WR. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Add support to svc_rdma_send to handle chained WRTom Tucker1-8/+21
WR can be submitted as linked lists of WR. Update the svc_rdma_send routine to handle WR chains. This will be used to submit a WR that uses an FRMR with another WR that invalidates the FRMR. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Modify post recv path to use local dma keyTom Tucker1-3/+9
Update the svc_rdma_post_recv routine to use the adapter's global LKEY instead of sc_phys_mr which is only valid when using a DMA MR. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Add a service to register a Fast Reg MR with the deviceTom Tucker1-35/+76
Fast Reg MR introduces a new WR type. Add a service to register the region with the adapter and update the completion handling to support completions with a NULL WR context. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Query device for Fast Reg support during connection setupTom Tucker1-6/+70
Query the device capabilities in the svc_rdma_accept function to determine what advanced memory management capabilities are supported by the device. Based on the query, select the most secure model available given the requirements of the transport and capabilities of the adapter. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Add FRMR get/put servicesTom Tucker1-5/+111
Add services for the allocating, freeing, and unmapping Fast Reg MR. These services will be used by the transport connection setup, send and receive routines. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-04NLM: Remove unused argument from svc_addsock() functionChuck Lever1-3/+1
Clean up: The svc_addsock() function no longer uses its "proto" argument, so remove it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29nfsd: use nfs client rpc callback programBenny Halevy1-1/+1
since commit ff7d9756b501744540be65e172d27ee321d86103 "nfsd: use static memory for callback program and stats" do_probe_callback uses a static callback program (NFS4_CALLBACK) rather than the one set in clp->cl_callback.cb_prog as passed in by the client in setclientid (4.0) or create_session (4.1). This patches introduces rpc_create_args.prognumber that allows overriding program->number when creating rpc_clnt. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Clean up debug messages in rpcb_clnt.cChuck Lever1-9/+5
The RPCB XDR functions are used for multiple procedures. For instance, rpcb_encode_getaddr() is used for RPCB_GETADDR, RPCB_SET, and RPCB_UNSET. Make the XDR debug messages more generic so they are less confusing. And, unlike in other RPC consumers in the kernel, a single debug flag enables all levels of debug messages in the RPC bind client, including XDR debug messages. Since the XDR decoders already report success or failure in this case, remove redundant debug messages in the mid-level rpcb_register_call() function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Fix up svc_unregister()Chuck Lever1-20/+38
With the new rpcbind code, a PMAP_UNSET will not have any effect on services registered via rpcbind v3 or v4. Implement a version of svc_unregister() that uses an RPCB_UNSET with an empty netid string to make sure we have cleared *all* entries for a kernel RPC service when shutting down, or before starting a fresh instance of the service. Use the new version only when CONFIG_SUNRPC_REGISTER_V4 is enabled; otherwise, the legacy PMAP version is used to ensure complete backwards-compatibility with the Linux portmapper daemon. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Use short-hand IPv6 ANYADDR for RPCB_SETChuck Lever1-4/+8
Clean up: When doing an RPCB_SET, make the kernel's rpcb client use the shorthand "::" for the universal form of the IPv6 ANY address. Without this patch, rpcbind will advertise: 0000:0000:0000:0000:0000:0000:0000:0000.x.y This is cosmetic only. It cleans up the display of information from /sbin/rpcinfo. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Register both netids for AF_INET6 serversChuck Lever1-43/+100
TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Support IPv6 when registering kernel RPC servicesChuck Lever1-7/+88
In order to advertise NFS-related services on IPv6 interfaces via rpcbind, the kernel RPC server implementation must use rpcb_v4_register() instead of rpcb_register(). A new kernel build option allows distributions to use the legacy v2 call until they integrate an appropriate user-space rpcbind daemon that can support IPv6 RPC services. I tried adding some automatic logic to fall back if registering with a v4 protocol request failed, but there are too many corner cases. So I just made it a compile-time switch that distributions can throw when they've replaced portmapper with rpcbind. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Split portmap unregister API into separate functionChuck Lever1-12/+50
Create a separate server-level interface for unregistering RPC services. The mechanics of, and the API for, registering and unregistering RPC services will diverge further as support for IPv6 is added. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Simplify rpcb_register() APIChuck Lever2-43/+30
Bruce suggested there's no need to expose the difference between an error sending the PMAP_SET request and an error reply from the portmapper to rpcb_register's callers. The user space equivalent of rpcb_register() is pmap_set(3), which returns a bool_t : either the PMAP set worked, or it didn't. Simple. So let's remove the "*okay" argument from rpcb_register() and rpcb_v4_register(), and simply return an error if any part of the call didn't work. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Set V6ONLY socket option for RPC listener socketsChuck Lever1-0/+13
My plan is to use an AF_INET listener on systems that support only IPv4, and an AF_INET6 listener on systems that can support IPv6. Incoming IPv4 packets will be posted to an AF_INET6 listener with a mapped IPv4 address. Max Matveev <makc@sgi.com> says: Creating a single listener can be dangerous - if net.ipv6.bindv6only is enabled then it's possible to create another listener in v4 namespace on the same port and steal the traffic from the "unifed" listener. You need to disable V6ONLY explicitly via a sockopt to stop that. Set appropriate socket option on RPC server listener sockets to prevent this. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Use proper INADDR_ANY when setting up RPC services on IPv6Chuck Lever1-6/+33
Teach svc_create_xprt() to use the correct ANY address for AF_INET6 based RPC services. No caller uses AF_INET6 yet. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Add address family field to svc_serv data structureChuck Lever1-5/+6
Introduce and initialize an address family field in the svc_serv structure. This field will determine what family to use for the service's listener sockets and what families are advertised via the local rpcbind daemon. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-20net: Use hton[sl]() instead of __constant_hton[sl]() where applicableArnaldo Carvalho de Melo1-2/+2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-01sunrpc: fix possible overrun on read of /proc/sys/sunrpc/transportsCyrill Gorcunov1-14/+4
Vegard Nossum reported ---------------------- > I noticed that something weird is going on with /proc/sys/sunrpc/transports. > This file is generated in net/sunrpc/sysctl.c, function proc_do_xprt(). When > I "cat" this file, I get the expected output: > $ cat /proc/sys/sunrpc/transports > tcp 1048576 > udp 32768 > But I think that it does not check the length of the buffer supplied by > userspace to read(). With my original program, I found that the stack was > being overwritten by the characters above, even when the length given to > read() was just 1. David Wagner added (among other things) that copy_to_user could be probably used here. Ingo Oeser suggested to use simple_read_from_buffer() here. The conclusion is that proc_do_xprt doesn't check for userside buffer size indeed so fix this by using Ingo's suggestion. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> CC: Ingo Oeser <ioe-lkml@rameria.de> Cc: Neil Brown <neilb@suse.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Greg Banks <gnb@sgi.com> Cc: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-08-13svcrdma: Fix race between svc_rdma_recvfrom thread and the dto_taskletTom Tucker2-7/+6
RDMA_READ completions are kept on a separate queue from the general I/O request queue. Since a separate lock is used to protect the RDMA_READ completion queue, a race exists between the dto_tasklet and the svc_rdma_recvfrom thread where the dto_tasklet sets the XPT_DATA bit and adds I/O to the read-completion queue. Concurrently, the recvfrom thread checks the generic queue, finds it empty and resets the XPT_DATA bit. A subsequent svc_xprt_enqueue will fail to enqueue the transport for I/O and cause the transport to "stall". The fix is to protect both lists with the same lock and set the XPT_DATA bit with this lock held. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-07-28Merge branch 'linus' into cpus4096Ingo Molnar2-2/+3
2008-07-26SL*B: drop kmem cache argument from constructorAlexey Dobriyan1-1/+1
Kmem cache passed to constructor is only needed for constructors that are themselves multiplexeres. Nobody uses this "feature", nor does anybody uses passed kmem cache in non-trivial way, so pass only pointer to object. Non-trivial places are: arch/powerpc/mm/init_64.c arch/powerpc/mm/hugetlbpage.c This is flag day, yes. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jon Tollefson <kniht@linux.vnet.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Matt Mackall <mpm@selenic.com> [akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c] [akpm@linux-foundation.org: fix mm/slab.c] [akpm@linux-foundation.org: fix ubifs] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26dma-mapping: add the device argument to dma_mapping_error()FUJITA Tomonori1-1/+2
Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26cpumask: change cpumask_of_cpu_ptr to use new cpumask_of_cpuMike Travis1-2/+1
* Replace previous instances of the cpumask_of_cpu_ptr* macros with a the new (lvalue capable) generic cpumask_of_cpu(). Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-21Merge branch 'linus' into cpus4096-for-linusIngo Molnar11-390/+332
Conflicts: net/sunrpc/svc.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20Merge branch 'for-2.6.27' of git://linux-nfs.org/~bfields/linuxLinus Torvalds10-387/+331
* 'for-2.6.27' of git://linux-nfs.org/~bfields/linux: (51 commits) nfsd: nfs4xdr.c do-while is not a compound statement nfsd: Use C99 initializers in fs/nfsd/nfs4xdr.c lockd: Pass "struct sockaddr *" to new failover-by-IP function lockd: get host reference in nlmsvc_create_block() instead of callers lockd: minor svclock.c style fixes lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_lock lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_testlock lockd: nlm_release_host() checks for NULL, caller needn't file lock: reorder struct file_lock to save space on 64 bit builds nfsd: take file and mnt write in nfs4_upgrade_open nfsd: document open share bit tracking nfsd: tabulate nfs4 xdr encoding functions nfsd: dprint operation names svcrdma: Change WR context get/put to use the kmem cache svcrdma: Create a kmem cache for the WR contexts svcrdma: Add flush_scheduled_work to module exit function svcrdma: Limit ORD based on client's advertised IRD svcrdma: Remove unused wait q from svcrdma_xprt structure svcrdma: Remove unneeded spin locks from __svc_rdma_free svcrdma: Add dma map count and WARN_ON ...
2008-07-18cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptrMike Travis1-1/+2
* This patch replaces the dangerous lvalue version of cpumask_of_cpu with new cpumask_of_cpu_ptr macros. These are patterned after the node_to_cpumask_ptr macros. In general terms, if there is a cpumask_of_cpu_map[] then a pointer to the cpumask_of_cpu_map[cpu] entry is used. The cpumask_of_cpu_map is provided when there is a large NR_CPUS count, reducing greatly the amount of code generated and stack space used for cpumask_of_cpu(). The pointer to the cpumask_t value is needed for calling set_cpus_allowed_ptr() to reduce the amount of stack space needed to pass the cpumask_t value. If there isn't a cpumask_of_cpu_map[], then a temporary variable is declared and filled in with value from cpumask_of_cpu(cpu) as well as a pointer variable pointing to this temporary variable. Afterwards, the pointer is used to reference the cpumask value. The compiler will optimize out the extra dereference through the pointer as well as the stack space used for the pointer, resulting in identical code. A good example of the orthogonal usages is in net/sunrpc/svc.c: case SVC_POOL_PERCPU: { unsigned int cpu = m->pool_to[pidx]; cpumask_of_cpu_ptr(cpumask, cpu); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask); return 1; } case SVC_POOL_PERNODE: { unsigned int node = m->pool_to[pidx]; node_to_cpumask_ptr(nodecpumask, node); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, nodecpumask); return 1; } Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18Merge branch 'linus' into cpus4096Ingo Molnar10-190/+400
Conflicts: drivers/acpi/processor_throttling.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18Merge branch 'master' of ↵David S. Miller11-208/+415
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/powerpc/booting-without-of.txt drivers/atm/Makefile drivers/net/fs_enet/fs_enet-main.c drivers/pci/pci-acpi.c net/8021q/vlan.c net/iucv/iucv.c
2008-07-16Merge branch 'linus' into cpus4096Ingo Molnar1-12/+11
Conflicts: arch/x86/xen/smp.c kernel/sched_rt.c net/iucv/iucv.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15SUNRPC: Remove the BKL from the callback functionsTrond Myklebust1-8/+1
Push it into those callback functions that actually need it. Note that all the NFS operations use their own locking, so don't need the BKL. Ditto for the rpcbind client. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-15SUNRPC: Support registering IPv6 interfaces with local rpcbind daemonChuck Lever1-4/+174
Introduce a new API to register RPC services on IPv6 interfaces to allow the NFS server and lockd to advertise on IPv6 networks. Unlike rpcb_register(), the new rpcb_v4_register() function uses rpcbind protocol version 4 to contact the local rpcbind daemon. The version 4 SET/UNSET procedures allow services to register address families besides AF_INET, register at specific network interfaces, and register transport protocols besides UDP and TCP. All of this functionality is exposed via the new rpcb_v4_register() kernel API. A user-space rpcbind daemon implementation that supports version 4 of the rpcbind protocol is required in order to make use of this new API. Note that rpcbind version 3 is sufficient to support the new rpcbind facilities listed above, but most extant implementations use version 4. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-15SUNRPC: Refactor rpcb_register to make rpcbindv4 support easierChuck Lever1-18/+30
rpcbind version 4 registration will reuse part of rpcb_register, so just split it out into a separate function now. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-15SUNRPC: None of rpcb_create's callers wants a privileged source portChuck Lever1-7/+5
Clean up: Callers that required a privileged source port now use rpcb_create_local(), so we can remove the @privileged argument from rpcb_create(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-15SUNRPC: Introduce a specific rpcb_create for contacting localhostChuck Lever1-11/+31
Add rpcb_create_local() for use by rpcb_register() and upcoming IPv6 registration functions. Ensure any errors encountered by rpcb_create_local() are properly reported. We can also use a statically allocated constant loopback socket address instead of one allocated on the stack and initialized every time the function is called. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-15SUNRPC: Use correct XDR encoding procedure for rpcbind SET/UNSETChuck Lever1-4/+8
The rpcbind versions 3 and 4 SET and UNSET procedures use the same arguments as the GETADDR procedure. While definitely a bug, this hasn't been a problem so far since the kernel hasn't used version 3 or 4 SET and UNSET. But this will change in just a moment. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09SUNRPC: Ensure our task is notified when an rpcbind call is doneTrond Myklebust2-23/+23
If another task is busy in rpcb_getport_async number, it is more efficient to have it wake us up when it has finished instead of arbitrarily sleeping for 5 seconds. Also ensure that rpcb_wake_rpcbind_waiters() is called regardless of whether or not rpcb_getport_done() gets called. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09SUNRPC: Use only rpcbind v2 for AF_INET requestsChuck Lever1-12/+0
Some server vendors support the higher versions of rpcbind only for AF_INET6. The kernel doesn't need to use v3 or v4 for AF_INET anyway, so change the kernel's rpcbind client to query AF_INET servers over rpcbind v2 only. This has a few interesting benefits: 1. If the rpcbind request is going over TCP, and the server doesn't support rpcbind versions 3 or 4, the client reduces by two the number of ephemeral ports left in TIME_WAIT for each rpcbind request. This will help during NFS mount storms. 2. The rpcbind interaction with servers that don't support rpcbind versions 3 or 4 will use less network traffic. Also helpful during mount storms. 3. We can eliminate the kernel build option that controls whether the kernel's rpcbind client uses rpcbind version 3 and 4 for AF_INET servers. Less complicated kernel configuration... Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09SUNRPC: Use GETADDR for rpcbind version 4 queriesChuck Lever1-2/+3
Some rpcbind servers that do support rpcbind version 4 do not support the GETVERSADDR procedure. Use GETADDR for querying rpcbind servers via rpcbind version 4 instead of GETVERSADDR. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09SUNRPC: Use rpcbind version 2 GETPORTChuck Lever1-1/+1
Clean up: Change the version 2 procedure name to GETPORT. It's the same procedure number as GETADDR, but version 2 implementations usually refer to it as GETPORT. This also now matches the procedure name used in the version 2 procedure entry in the rpcb_next_version[] array, making it slightly less confusing. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09SUNRPC: Document some naked integers in rpcbind clientChuck Lever1-13/+36
Clean up: Replace naked integers that represent rpcbind protocol versions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09SUNRPC: More useful debugging output for rpcb clientChuck Lever1-3/+3
Clean up dprintk's in rpcb client's XDR decoder functions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09SUNRPC: Ensure all transports set rq_xtime consistentlyChuck Lever2-2/+1
The RPC client uses the rq_xtime field in each RPC request to determine the round-trip time of the request. Currently, the rq_xtime field is initialized by each transport just before it starts enqueing a request to be sent. However, transports do not handle initializing this value consistently; sometimes they don't initialize it at all. To make the measurement of request round-trip time consistent for all RPC client transport capabilities, pull rq_xtime initialization into the RPC client's generic transport logic. Now all transports will get a standardized RTT measure automatically, from: xprt_transmit() to xprt_complete_rqst() This makes round-trip time calculation more accurate for the TCP transport. The socket ->sendmsg() method can return "-EAGAIN" if the socket's output buffer is full, so the TCP transport's ->send_request() method may call the ->sendmsg() method repeatedly until it gets all of the request's bytes queued in the socket's buffer. Currently, the TCP transport sets the rq_xtime field every time through that loop so the final value is the timestamp just before the *last* call to the underlying socket's ->sendmsg() method. After this patch, the rq_xtime field contains a timestamp that reflects the time just before the *first* call to ->sendmsg(). This is consequential under heavy workloads because large requests often take multiple ->sendmsg() calls to get all the bytes of a request queued. The TCP transport causes the request to sleep until the remote end of the socket has received enough bytes to clear space in the socket's local output buffer. This delay can be quite significant. The method introduced by this patch is a more accurate measure of RTT for stream transports, since the server can cause enough back pressure to delay (ie increase the latency of) requests from the client. Additionally, this patch corrects the behavior of the RDMA transport, which entirely neglected to initialize the rq_xtime field. RPC performance metrics for RDMA transports now display correct RPC request round trip times. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Tom Talpey <thomas.talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>