summaryrefslogtreecommitdiffstats
path: root/net/sunrpc/xprt.c
AgeCommit message (Collapse)AuthorFilesLines
2008-07-09SUNRPC: Ensure all transports set rq_xtime consistentlyChuck Lever1-0/+1
The RPC client uses the rq_xtime field in each RPC request to determine the round-trip time of the request. Currently, the rq_xtime field is initialized by each transport just before it starts enqueing a request to be sent. However, transports do not handle initializing this value consistently; sometimes they don't initialize it at all. To make the measurement of request round-trip time consistent for all RPC client transport capabilities, pull rq_xtime initialization into the RPC client's generic transport logic. Now all transports will get a standardized RTT measure automatically, from: xprt_transmit() to xprt_complete_rqst() This makes round-trip time calculation more accurate for the TCP transport. The socket ->sendmsg() method can return "-EAGAIN" if the socket's output buffer is full, so the TCP transport's ->send_request() method may call the ->sendmsg() method repeatedly until it gets all of the request's bytes queued in the socket's buffer. Currently, the TCP transport sets the rq_xtime field every time through that loop so the final value is the timestamp just before the *last* call to the underlying socket's ->sendmsg() method. After this patch, the rq_xtime field contains a timestamp that reflects the time just before the *first* call to ->sendmsg(). This is consequential under heavy workloads because large requests often take multiple ->sendmsg() calls to get all the bytes of a request queued. The TCP transport causes the request to sleep until the remote end of the socket has received enough bytes to clear space in the socket's local output buffer. This delay can be quite significant. The method introduced by this patch is a more accurate measure of RTT for stream transports, since the server can cause enough back pressure to delay (ie increase the latency of) requests from the client. Additionally, this patch corrects the behavior of the RDMA transport, which entirely neglected to initialize the rq_xtime field. RPC performance metrics for RDMA transports now display correct RPC request round trip times. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Tom Talpey <thomas.talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09SUNRPC: Remove obsolete messages during transport connectChuck Lever1-7/+1
Recent changes to the RPC client's transport connect logic make connect status values ECONNREFUSED and ECONNRESET impossible. Clean up xprt_connect_status() to account for these changes. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: iwlwifi: Allow building iwl3945 without iwl4965. wireless: Fix compile error with wifi & leds tcp: Fix slab corruption with ipv6 and tcp6fuzz ipv4/ipv6 compat: Fix SSM applications on 64bit kernels. [IPSEC]: Use digest_null directly for auth sunrpc: fix missing kernel-doc can: Fix copy_from_user() results interpretation Revert "ipv6: Fix typo in net/ipv6/Kconfig" tipc: endianness annotations ipv6: result of csum_fold() is already 16bit, no need to cast [XFRM] AUDIT: Fix flowlabel text format ambibuity.
2008-04-27sunrpc: fix missing kernel-docRandy Dunlap1-1/+1
Fix missing sunrpc kernel-doc: Warning(linux-2.6.25-git7//net/sunrpc/xprt.c:451): No description found for parameter 'action' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-19SUNRPC: Don't disconnect more than once if retransmitting NFSv4 requestsTrond Myklebust1-0/+29
NFSv4 requires us to ensure that we break the TCP connection before we're allowed to retransmit a request. However in the case where we're retransmitting several requests that have been sent on the same connection, we need to ensure that we don't interfere with the attempt to reconnect and/or break the connection again once it has been established. We therefore introduce a 'connection' cookie that is bumped every time a connection is broken. This allows requests to track if they need to force a disconnection. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19SUNRPC: Remove the unused export of xprt_force_disconnectTrond Myklebust1-1/+0
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19SUNRPC: Fix read ordering problems with req->rq_private_buf.lenTrond Myklebust1-1/+2
We want to ensure that req->rq_private_buf.len is updated before req->rq_received, so that call_decode() doesn't use an old value for req->rq_rcv_buf.len. In 'call_decode()' itself, instead of using task->tk_status (which is set using req->rq_received) must use the actual value of req->rq_private_buf.len when deciding whether or not the received RPC reply is too short. Finally ensure that we set req->rq_rcv_buf.len to zero when retrying a request. A typo meant that we were resetting req->rq_private_buf.len in call_decode(), and then clobbering that value with the old rq_rcv_buf.len again in xprt_transmit(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19SUNRPC: Fix up xprt_write_space()Trond Myklebust1-2/+2
The rest of the networking layer uses SOCK_ASYNC_NOSPACE to signal whether or not we have someone waiting for buffer memory. Convert the SUNRPC layer to use the same idiom. Remove the unlikely()s in xs_udp_write_space and xs_tcp_write_space. In fact, the most common case will be that there is nobody waiting for buffer space. SOCK_NOSPACE is there to tell the TCP layer whether or not the cwnd was limited by the application window. Ensure that we follow the same idiom as the rest of the networking layer here too. Finally, ensure that we clear SOCK_ASYNC_NOSPACE once we wake up, so that write_space() doesn't keep waking things up on xprt->pending. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-28SUNRPC: Add a (empty for the moment) destructor for rpc_wait_queuesTrond Myklebust1-0/+5
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-25SUNRPC: Run rpc timeout functions as callbacks instead of in softirqsTrond Myklebust1-13/+15
An audit of the current RPC timeout functions shows that they don't really ever need to run in the softirq context. As long as the softirq is able to signal that the wakeup is due to a timeout (which it can do by setting task->tk_status to -ETIMEDOUT) then the callback functions can just run as standard task->tk_callback functions (in the rpciod/process context). The only possible border-line case would be xprt_timer() for the case of UDP, when the callback is used to reduce the size of the transport congestion window. In testing, however, the effect of moving that update to a callback would appear to be minor. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-25SUNRPC: Convert users of rpc_wake_up_task to use rpc_wake_up_queued_taskTrond Myklebust1-5/+5
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-25SUNRPC: Clean up rpc_run_timer()Trond Myklebust1-2/+0
All RPC timeout callback functions are expected to wake the task up. We can enforce this by moving the wakeup back into rpc_run_timer. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-13docbook: sunrpc filenames and notation fixesRandy Dunlap1-1/+1
Use updated file list for docbook files and fix kernel-doc warnings in sunrpc: Warning(linux-2.6.24-git12//net/sunrpc/rpc_pipe.c:689): No description found for parameter 'rpc_client' Warning(linux-2.6.24-git12//net/sunrpc/rpc_pipe.c:765): No description found for parameter 'flags' Warning(linux-2.6.24-git12//net/sunrpc/clnt.c:584): No description found for parameter 'tk_ops' Warning(linux-2.6.24-git12//net/sunrpc/clnt.c:618): No description found for parameter 'bufsize' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-30SUNRPC: Add support for per-client timeout valuesTrond Myklebust1-5/+6
In order to be able to support setting the timeo and retrans parameters on a per-mountpoint basis, we move the rpc_timeout structure into the rpc_clnt. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Clean up the transport timeout initialisationTrond Myklebust1-17/+0
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Restrict sunrpc client exportsTrond Myklebust1-1/+1
The sunrpc client exports are not meant to be part of any official kernel API: they can change at the drop of a hat. Mark them as internal functions using EXPORT_SYMBOL_GPL. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Move exported declarations to the function declarationsTrond Myklebust1-0/+1
Do this for all RPC client related functions and XDR functions. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Rename xprt_disconnect()Trond Myklebust1-3/+3
xprt_disconnect() should really only be called when the transport shutdown is completed, and it is time to wake up any pending tasks. Rename it to xprt_disconnect_done() in order to reflect the semantical change. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: xprt_autoclose() should not call xprt_disconnect()Trond Myklebust1-1/+0
The transport layer should do that itself whenever appropriate. Note that the RDMA transport already assumes that it needs to call xprt_disconnect in xprt_rdma_close(). For TCP sockets, we want to call xprt_disconnect() only after the connection has been closed by both ends. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Fix a race in xs_tcp_state_change()Trond Myklebust1-0/+20
When scheduling the autoclose RPC call, we want to ensure that we don't race against the test_bit() call in xprt_clear_locked(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-28[NET]: Convert init_timer into setup_timerPavel Emelyanov1-3/+2
Many-many code in the kernel initialized the timer->function and timer->data together with calling init_timer(timer). There is already a helper for this. Use it for networking code. The patch is HUGE, but makes the code 130 lines shorter (98 insertions(+), 228 deletions(-)). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-22[SUNRPC]: Remove SPIN_LOCK_UNLOCKEDJiri Slaby1-1/+1
SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-09NFS/SUNRPC: support transport protocol naming\"Talpey, Thomas\1-5/+3
To prepare for including non-sockets-based RPC transports, select RPC transports by an identifier (to be used in following patches). Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: rename the rpc_xprtsock_create structure\"Talpey, Thomas\1-1/+1
To prepare for including non-sockets-based RPC transports, change the overly suggestive name of the transport creation arguments struct. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Finish API to load RPC transport implementations dynamically\"Talpey, Thomas\1-11/+15
Allow RPC client transport implementations to be loaded as needed, or as they become available from distributors or third-party vendors. Note that we leave the IP sockets implementation in sunrpc.o permanently, as IP functionality is always available in any kernel that runs NFS. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Provide a new API for registering transport implementations\"Talpey, Thomas\1-0/+75
To allow transport capabilities to be loaded dynamically, provide an API for registering and unregistering the transports with the RPC client. Eventually xprt_create_transport() will be changed to search the list of registered transports when initializing a fresh transport. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions\"Talpey, Thomas\1-0/+15
SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions As a preface to allowing arbitrary transport modules to be loaded dynamically, add EXPORT_SYMBOL_GPL for all generic transport functions that a transport implementation might want to use. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: cleanup transport creation argument passingFrank van Maarseveen1-9/+6
Cleanup argument passing to functions for creating an RPC transport. Signed-off-by: Frank van Maarseveen <frankvm@frankvm.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: fix hang due to eventd deadlock...Trond Myklebust1-2/+2
Brian Behlendorf writes: The root cause of the NFS hang we were observing appears to be a rare deadlock between the kernel provided usermodehelper API and the linux NFS client. The deadlock can arise because both of these services use the generic linux work queues. The usermodehelper API run the specified user application in the context of the work queue. And NFS submits both cleanup and reconnect work to the generic work queue for handling. Normally this is fine but a deadlock can result in the following situation. - NFS client is in a disconnected state - [events/0] runs a usermodehelper app with an NFS dependent operation, this triggers an NFS reconnect. - NFS reconnect happens to be submitted to [events/0] work queue. - Deadlock, the [events/0] work queue will never process the reconnect because it is blocked on the previous NFS dependent operation which will not complete.` The solution is simply to run reconnect requests on rpciod. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-04-30SUNRPC: introduce rpcbind: replacement for in-kernel portmapperChuck Lever1-0/+1
Introduce a replacement for the in-kernel portmapper client that supports all 3 versions of the rpcbind protocol. This code is not used yet. Original code by Groupe Bull updated for the latest kernel, with multiple bug fixes. Note that rpcb_clnt.c does not yet support registering via versions 3 and 4 of the rpcbind protocol. That is planned for a later patch. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-04-30SUNRPC: Eliminate side effects from rpc_mallocChuck Lever1-1/+1
Currently rpc_malloc sets req->rq_buffer internally. Make this a more generic interface: return a pointer to the new buffer (or NULL) and make the caller set req->rq_buffer and req->rq_bufsize. This looks much more like kmalloc and eliminates the side effects. To fix a potential deadlock, this patch also replaces GFP_NOFS with GFP_NOWAIT in rpc_malloc. This prevents async RPCs from sleeping outside the RPC's task scheduler while allocating their buffer. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-04-30SUNRPC: RPC buffer size estimates are too largeChuck Lever1-1/+0
The RPC buffer size estimation logic in net/sunrpc/clnt.c always significantly overestimates the requirements for the buffer size. A little instrumentation demonstrated that in fact rpc_malloc was never allocating the buffer from the mempool, but almost always called kmalloc. To compute the size of the RPC buffer more precisely, split p_bufsiz into two fields; one for the argument size, and one for the result size. Then, compute the sum of the exact call and reply header sizes, and split the RPC buffer precisely between the two. That should keep almost all RPC buffers within the 2KiB buffer mempool limit. And, we can finally be rid of RPC_SLACK_SPACE! Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-04-20RPC: Fix the TCP resend semantics for NFSv4Trond Myklebust1-10/+0
Fix a regression due to the patch "NFS: disconnect before retrying NFSv4 requests over TCP" The assumption made in xprt_transmit() that the condition "req->rq_bytes_sent == 0 and request is on the receive list" should imply that we're dealing with a retransmission is false. Firstly, it may simply happen that the socket send queue was full at the time the request was initially sent through xprt_transmit(). Secondly, doing this for each request that was retransmitted implies that we disconnect and reconnect for _every_ request that happened to be retransmitted irrespective of whether or not a disconnection has already occurred. Fix is to move this logic into the call_status request timeout handler. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12Merge branch 'master' of /home/trondmy/kernel/linux-2.6/Trond Myklebust1-2/+2
Conflicts: net/sunrpc/auth_gss/gss_krb5_crypto.c net/sunrpc/auth_gss/gss_spkm3_token.c net/sunrpc/clnt.c Merge with mainline and fix conflicts.
2007-02-12NFS: disconnect before retrying NFSv4 requests over TCPChuck Lever1-0/+10
RFC3530 section 3.1.1 states an NFSv4 client MUST NOT send a request twice on the same connection unless it is the NULL procedure. Section 3.1.1 suggests that the client should disconnect and reconnect if it wants to retry a request. Implement this by adding an rpc_clnt flag that an ULP can use to specify that the underlying transport should be disconnected on a major timeout. The NFSv4 client asserts this new flag, and requests no retries after a minor retransmit timeout. Note that disconnecting on a retransmit is in general not safe to do if the RPC client does not reuse the TCP port number when reconnecting. See http://bugzilla.linux-nfs.org/show_bug.cgi?id=6 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-02-10[NET] SUNRPC: Fix whitespace errors.YOSHIFUJI Hideaki1-2/+2
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-03SUNRPC: fix print format for tk_pidChuck Lever1-26/+31
The tk_pid field is an unsigned short. The proper print format specifier for that type is %5u, not %4d. Also clean up some miscellaneous print formatting nits. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-07Merge branch 'master' of /home/trondmy/kernel/linux-2.6/ into merge_linusTrond Myklebust1-3/+4
Conflicts: include/linux/sunrpc/xprt.h net/sunrpc/xprtsock.c Fix up conflicts with the workqueue changes.
2006-12-06SUNRPC: Remove pprintk() from net/sunrpc/xprt.cChuck Lever1-2/+0
These appear to be deprecated. Removing them also gets rid of some sparse noise. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06SUNRPC: Make the transport-specific setup routine allocate rpc_xprtChuck Lever1-21/+10
Change the location where the rpc_xprt structure is allocated so each transport implementation can allocate a private area from the same chunk of memory. Note also that xprt->ops->destroy, rather than xprt_destroy, is now responsible for freeing rpc_xprt when the transport is destroyed. Test plan: Connectathon. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-11-22WorkStruct: Pass the work_struct pointer instead of context dataDavid Howells1-3/+4
Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
2006-09-28[SUNRPC]: trivial endianness annotationsAlexey Dobriyan1-2/+2
pure s/u32/__be32/ [AV: large part based on Alexey's patches] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22SUNRPC: Add refcounting to the struct rpc_xprtTrond Myklebust1-3/+25
In a subsequent patch, this will allow the portmapper to take a reference to the rpc_xprt for which it is updating the port number, fixing an Oops. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22SUNRPC: Clean up soft task error handlingTrond Myklebust1-7/+1
- Ensure that the task aborts the RPC call only when it has actually timed out. - Ensure that req->rq_majortimeo is initialised correctly. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22SUNRPC: Eliminate xprt_create_proto and rpc_create_clientChuck Lever1-79/+0
The two function call API for creating a new RPC client is now obsolete. Remove it. Also, remove an unnecessary check to see whether the caller is capable of using privileged network services. The kernel RPC client always uses a privileged ephemeral port by default; callers are responsible for checking the authority of users to make use of any RPC service, or for specifying that a nonprivileged port is acceptable. Test plan: Repeated runs of Connectathon locking suite. Check network trace to ensure correctness of NLM requests and replies. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22SUNRPC: use sockaddr + size when creating remote transport endpointsChuck Lever1-0/+75
Prepare for more generic transport endpoint handling needed by transports that might use different forms of addressing, such as IPv6. Introduce a single function call to replace the two-call xprt_create_proto/rpc_create_client API. Define a new rpc_create_args structure that allows callers to pass in remote endpoint addresses of varying length. Test-plan: Compile kernel with CONFIG_NFS enabled. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22SUNRPC: Use "sockaddr_storage" for storing RPC client's remote peer addressChuck Lever1-1/+2
IPv6 addresses are big (128 bytes). Now that no RPC client consumers treat the addr field in rpc_xprt structs as an opaque, and access it only via the API calls, we can safely widen the field in the rpc_xprt struct to accomodate larger addresses. Test plan: Compile kernel with CONFIG_NFS enabled. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22SUNRPC: Make RPC portmapper use per-transport storageChuck Lever1-0/+1
Move connection and bind state that was maintained in the rpc_clnt structure to the rpc_xprt structure. This will allow the creation of a clean API for plugging in different types of bind mechanisms. This brings improvements such as the elimination of a single spin lock to control serialization for all in-kernel RPC binding. A set of per-xprt bitops is used to serialize tasks during RPC binding, just like it now works for making RPC transport connections. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. NFSv2/3 and NFSv4 mounting should be carefully checked. Probably need to rig a server where certain services aren't running, or that returns an error for some typical operation. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22SUNRPC: Create a helper to tell whether a transport is boundChuck Lever1-1/+1
Hide the contents and format of xprt->addr by eliminating direct uses of the xprt->addr.sin_port field. This change is required to support alternate RPC host address formats (eg IPv6). Test-plan: Destructive testing (unplugging the network temporarily). Repeated runs of Connectathon locking suite with UDP and TCP. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-08-03RPC: Ensure that we disconnect TCP socket when client requests error outTrond Myklebust1-18/+3
If we're part way through transmitting a TCP request, and the client errors, then we need to disconnect and reconnect the TCP socket in order to avoid confusing the server. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 031a50c8b9ea82616abd4a4e18021a25848941ce commit)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 13:37:28 +0000