summaryrefslogtreecommitdiffstats
path: root/net/smc/smc_clc.c
AgeCommit message (Collapse)AuthorFilesLines
2019-11-15net/smc: abnormal termination of SMCD link groupsUrsula Braun1-1/+1
A final cleanup due to SMCD device removal means immediate freeing of all link groups belonging to this device in interrupt context. This patch introduces a separate SMCD link group termination routine, which terminates all link groups of an SMCD device. This new routine smcd_terminate_all ()is reused if the smc module is unloaded. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-02net: use new in_dev_ifa iteratorsFlorian Westphal1-4/+7
Use in_dev_for_each_ifa_rcu/rtnl instead. This prevents sparse warnings once proper __rcu annotations are added. Signed-off-by: Florian Westphal <fw@strlen.de> t di# Last commands done (6 commands done): Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12net/smc: consolidate function parametersKarsten Graul1-5/+5
During initialization of an SMC socket a lot of function parameters need to get passed down the function call path. Consolidate the parameters in a helper struct so there are less enough parameters to get all passed by register. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01net/smc: fix another sizeof to int comparisonUrsula Braun1-1/+1
Comparing an int to a size, which is unsigned, causes the int to become unsigned, giving the wrong result. kernel_sendmsg can return a negative error code. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net/smc: short wait for late smc_clc_wait_msgUrsula Braun1-3/+3
After sending one of the initial LLC messages CONFIRM LINK or ADD LINK, there is already a wait for the LLC response. It does not make sense to wait another long time for a CLC DECLINE. Thus this patch introduces a shorter wait time for these cases. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net/smc: allow fallback after clc timeoutsUrsula Braun1-2/+7
If connection initialization fails for the LLC CONFIRM LINK or the LLC ADD LINK step, fallback to TCP should be enabled. Thus the negative return code -EAGAIN should switch to a positive timeout reason code in these cases, and the internal CLC socket should not have a set sk_err. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net/smc: remove sock_error detour in clc-functionsUrsula Braun1-13/+5
There is no need to store the return value in sk_err, if it is afterwards cleared again with sock_error(). This patch sets the return value directly. Just cleanup, no functional change. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24iov_iter: Separate type from direction and use accessor functionsDavid Howells1-2/+2
In the iov_iter struct, separate the iterator type from the iterator direction and use accessor functions to access them in most places. Convert a bunch of places to use switch-statements to access them rather then chains of bitwise-AND statements. This makes it easier to add further iterator types. Also, this can be more efficient as to implement a switch of small contiguous integers, the compiler can use ~50% fewer compare instructions than it has to use bitwise-and instructions. Further, cease passing the iterator type into the iterator setup function. The iterator function can set that itself. Only the direction is required. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-18net/smc: fix sizeof to int comparisonYueHaibing1-8/+6
Comparing an int to a size, which is unsigned, causes the int to become unsigned, giving the wrong result. kernel_sendmsg can return a negative error code. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25net/smc: provide fallback reason codeKarsten Graul1-1/+5
Remember the fallback reason code and the peer diagnosis code for smc sockets, and provide them in smc_diag.c to the netlink interface. And add more detailed reason codes. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25net/smc: use correct vlan gid of RoCE deviceUrsula Braun1-6/+4
SMC code uses the base gid for VLAN traffic. The gids exchanged in the CLC handshake and the gid index used for the QP have to switch from the base gid to the appropriate vlan gid. When searching for a matching IB device port for a certain vlan device, it does not make sense to return an IB device port, which is not enabled for the used vlan_id. Add another check whether a vlan gid exists for a certain IB device port. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller1-1/+2
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net/smc: reset recv timeout after clc handshakeKarsten Graul1-1/+2
During clc handshake the receive timeout is set to CLC_WAIT_TIME. Remember and reset the original timeout value after the receive calls, and remove a duplicate assignment of CLC_WAIT_TIME. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30net/smc: add SMC-D support in CLC messagesHans Wippel1-56/+137
There are two types of SMC: SMC-R and SMC-D. These types are signaled within the CLC messages during the CLC handshake. This patch adds support for and checks of the SMC type. Also, SMC-R and SMC-D need to exchange different information during the CLC handshake. So, this patch extends the current message formats to support the SMC-D header fields. The Proposal message can contain both SMC-R and SMC-D information. The Accept and Confirm messages contain either SMC-R or SMC-D information. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Suggested-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net/smc: rename connection index to RMBE indexHans Wippel1-2/+2
The connection index is actually a RMBE index. So, this patch changes the name accordingly. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16net/smc: check for pending terminationKarsten Graul1-1/+1
Avoid to run the processing in smc_lgr_terminate() more than once, remember when the link group termination is triggered. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27net/smc: use announced length in sock_recvmsg()Ursula Braun1-1/+1
Not every CLC proposal message needs the maximum buffer length. Due to the MSG_WAITALL flag, it is important to use the peeked real length when receiving the message. Fixes: d63d271ce2b5ce ("smc: switch to sock_recvmsg()") Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net/smc: add ipv6 support to CLC layerKarsten Graul1-14/+95
The CLC layer is updated to support ipv6 proposal messages from peers and to match incoming proposal messages against the ipv6 addresses of the net device. struct smc_clc_ipv6_prefix is updated to provide the space for an ipv6 address (struct was not used before). SMC_CLC_MAX_LEN is updated to include the size of the proposal prefix. Existing code in net is not affected, the previous SMC_CLC_MAX_LEN value is large enough to hold ipv4 proposal messages. Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net/smc: restructure netinfo for CLC proposal msgsKarsten Graul1-23/+77
Introduce functions smc_clc_prfx_set to retrieve IP information for the CLC proposal msg and smc_clc_prfx_match to match the contents of a proposal message against the IP addresses of the net device. The new functions replace the functionality provided by smc_clc_netinfo_by_tcpsk, which is removed by this patch. The match functionality is extended to scan all ipv4 addresses of the net device for a match against the ipv4 subnet from the proposal msg. Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01net/smc: move netinfo function to file smc_clc.cKarsten Graul1-2/+42
The function smc_netinfo_by_tcpsk() belongs to CLC handling. Move it to smc_clc.c and rename to smc_clc_netinfo_by_tcpsk. Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01net/smc: cleanup smc_llc.h and smc_clc.h headersStefan Raspl1-0/+3
Remove structures used internal only from headers. And remove an extra function parameter. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-14/+70
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2017-12-07smc: support variable CLC proposal messagesUrsula Braun1-13/+69
According to RFC7609 [1] the CLC proposal message contains an area of unknown length for future growth. Additionally it may contain up to 8 IPv6 prefixes. The current version of the SMC-code does not understand CLC proposal messages using these variable length fields and, thus, is incompatible with SMC implementations in other operating systems. This patch makes sure, SMC understands incoming CLC proposals * with arbitrary length values for future growth * with up to 8 IPv6 prefixes [1] SMC-R Informational RFC: http://www.rfc-editor.org/info/rfc7609 Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07smc: improve smc_clc_send_decline() error handlingUrsula Braun1-1/+1
Let smc_clc_send_decline() return with an error, if the amount sent is smaller than the length of an smc decline message. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02smc: switch to sock_recvmsg()Al Viro1-8/+10
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-21net/smc: terminate link group if out-of-sync is receivedUrsula Braun1-5/+5
An out-of-sync condition can just be detected by the client. If the server receives a CLC DECLINE message indicating an out-of-sync condition for the link groups, the server must clean up the out-of-sync link group. There is no need for an extra third parameter in smc_clc_send_decline(). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: use separate memory regions for RMBsUrsula Braun1-2/+2
SMC currently uses the unsafe_global_rkey of the protection domain, which exposes all memory for remote reads and writes once a connection is established. This patch introduces separate memory regions with separate rkeys for every RMB. Now the unsafe_global_rkey of the protection domain is no longer needed. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29net/smc: introduce sg-logic for RMBsUrsula Braun1-6/+6
The follow-on patch makes use of ib_map_mr_sg() when introducing separate memory regions for RMBs. This function is based on scatterlists; thus this patch introduces scatterlists for RMBs. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16smc: switch to usage of IB_PD_UNSAFE_GLOBAL_RKEYUrsula Braun1-2/+2
Currently, SMC enables remote access to physical memory when a user has successfully configured and established an SMC-connection until ten minutes after the last SMC connection is closed. Because this is considered a security risk, drivers are supposed to use IB_PD_UNSAFE_GLOBAL_RKEY in such a case. This patch changes the current SMC code to use IB_PD_UNSAFE_GLOBAL_RKEY. This improves user awareness, but does not remove the security risk itself. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-03sched/headers: Move task_struct::signal and task_struct::sighand types and ↵Ingo Molnar1-0/+2
accessors into <linux/sched/signal.h> task_struct::signal and task_struct::sighand are pointers, which would normally make it straightforward to not define those types in sched.h. That is not so, because the types are accompanied by a myriad of APIs (macros and inline functions) that dereference them. Split the types and the APIs out of sched.h and move them into a new header, <linux/sched/signal.h>. With this change sched.h does not know about 'struct signal' and 'struct sighand' anymore, trying to put accessors into sched.h as a test fails the following way: ./include/linux/sched.h: In function ‘test_signal_types’: ./include/linux/sched.h:2461:18: error: dereferencing pointer to incomplete type ‘struct signal_struct’ ^ This reduces the size and complexity of sched.h significantly. Update all headers and .c code that relied on getting the signal handling functionality from <linux/sched.h> to include <linux/sched/signal.h>. The list of affected files in the preparatory patch was partly generated by grepping for the APIs, and partly by doing coverage build testing, both all[yes|mod|def|no]config builds on 64-bit and 32-bit x86, and an array of cross-architecture builds. Nevertheless some (trivial) build breakage is still expected related to rare Kconfig combinations and in-flight patches to various kernel code, but most of it should be handled by this patch. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-12smc: ETH_ALEN as memcpy length for mac addressesUrsula Braun1-6/+4
When creating an SMC connection, there is a CLC (connection layer control) handshake to prepare for RDMA traffic. The corresponding code is part of commit 0cfdd8f92cac ("smc: connection and link group creation"). Mac addresses to be exchanged in the handshake are copied with a wrong length of 12 instead of 6 bytes. Following code overwrites the wrongly copied code, but nevertheless the correct length should already be used for the preceding mac address copying. Use ETH_ALEN for the memcpy length with mac addresses. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Fixes: 0cfdd8f92cac ("smc: connection and link group creation") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: initialize IB transport incl. PD, MR, QP, CQ, event, WRUrsula Braun1-3/+7
Prepare the link for RDMA transport: Create a queue pair (QP) and move it into the state Ready-To-Receive (RTR). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: remote memory buffers (RMBs)Ursula Braun1-3/+3
* allocate data RMB memory for sending and receiving * size depends on the maximum socket send and receive buffers * allocated RMBs are kept during life time of the owning link group * map the allocated RMBs to DMA Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: connection and link group creationUrsula Braun1-6/+32
* create smc_connection for SMC-sockets * determine suitable link group for a connection * create a new link group if necessary Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09smc: CLC handshake (incl. preparation steps)Ursula Braun1-0/+252
* CLC (Connection Layer Control) handshake Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>