summaryrefslogtreecommitdiffstats
path: root/net/sctp
AgeCommit message (Collapse)AuthorFilesLines
2021-07-13net: Use nlmsg_unicast() instead of netlink_unicast()Yajun Deng1-4/+2
It has 'if (err >0 )' statement in nlmsg_unicast(), so use nlmsg_unicast() instead of netlink_unicast(), this looks more concise. v2: remove the change in netfilter. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01sctp: move 198 addresses from unusable to private scopeXin Long1-1/+2
The doc draft-stewart-tsvwg-sctp-ipv4-00 that restricts 198 addresses was never published. These addresses as private addresses should be allowed to use in SCTP. As Michael Tuexen suggested, this patch is to move 198 addresses from unusable to private scope. Reported-by: Sérgio <surkamp@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01sctp: check pl.raise_count separately from its incrementXin Long1-4/+7
As Marcelo's suggestion this will make code more clear to read. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01sctp: prevent info leak in sctp_make_heartbeat()Dan Carpenter1-1/+1
The "hbinfo" struct has a 4 byte hole at the end so we have to zero it out to prevent stack information from being disclosed. Fixes: fe59379b9ab7 ("sctp: do the basic send and recv for PLPMTUD probe") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-30Merge tag 'net-next-5.14' of ↵Linus Torvalds15-169/+728
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - BPF: - add syscall program type and libbpf support for generating instructions and bindings for in-kernel BPF loaders (BPF loaders for BPF), this is a stepping stone for signed BPF programs - infrastructure to migrate TCP child sockets from one listener to another in the same reuseport group/map to improve flexibility of service hand-off/restart - add broadcast support to XDP redirect - allow bypass of the lockless qdisc to improving performance (for pktgen: +23% with one thread, +44% with 2 threads) - add a simpler version of "DO_ONCE()" which does not require jump labels, intended for slow-path usage - virtio/vsock: introduce SOCK_SEQPACKET support - add getsocketopt to retrieve netns cookie - ip: treat lowest address of a IPv4 subnet as ordinary unicast address allowing reclaiming of precious IPv4 addresses - ipv6: use prandom_u32() for ID generation - ip: add support for more flexible field selection for hashing across multi-path routes (w/ offload to mlxsw) - icmp: add support for extended RFC 8335 PROBE (ping) - seg6: add support for SRv6 End.DT46 behavior - mptcp: - DSS checksum support (RFC 8684) to detect middlebox meddling - support Connection-time 'C' flag - time stamping support - sctp: packetization Layer Path MTU Discovery (RFC 8899) - xfrm: speed up state addition with seq set - WiFi: - hidden AP discovery on 6 GHz and other HE 6 GHz improvements - aggregation handling improvements for some drivers - minstrel improvements for no-ack frames - deferred rate control for TXQs to improve reaction times - switch from round robin to virtual time-based airtime scheduler - add trace points: - tcp checksum errors - openvswitch - action execution, upcalls - socket errors via sk_error_report Device APIs: - devlink: add rate API for hierarchical control of max egress rate of virtual devices (VFs, SFs etc.) - don't require RCU read lock to be held around BPF hooks in NAPI context - page_pool: generic buffer recycling New hardware/drivers: - mobile: - iosm: PCIe Driver for Intel M.2 Modem - support for Qualcomm MSM8998 (ipa) - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU) - NXP SJA1110 Automotive Ethernet 10-port switch - Qualcomm QCA8327 switch support (qca8k) - Mikrotik 10/25G NIC (atl1c) Driver changes: - ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP (our first foray into MAC/PHY description via ACPI) - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx - Mellanox/Nvidia NIC (mlx5) - NIC VF offload of L2 bridging - support IRQ distribution to Sub-functions - Marvell (prestera): - add flower and match all - devlink trap - link aggregation - Netronome (nfp): connection tracking offload - Intel 1GE (igc): add AF_XDP support - Marvell DPU (octeontx2): ingress ratelimit offload - Google vNIC (gve): new ring/descriptor format support - Qualcomm mobile (rmnet & ipa): inline checksum offload support - MediaTek WiFi (mt76) - mt7915 MSI support - mt7915 Tx status reporting - mt7915 thermal sensors support - mt7921 decapsulation offload - mt7921 enable runtime pm and deep sleep - Realtek WiFi (rtw88) - beacon filter support - Tx antenna path diversity support - firmware crash information via devcoredump - Qualcomm WiFi (wcn36xx) - Wake-on-WLAN support with magic packets and GTK rekeying - Micrel PHY (ksz886x/ksz8081): add cable test support" * tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits) tcp: change ICSK_CA_PRIV_SIZE definition tcp_yeah: check struct yeah size at compile time gve: DQO: Fix off by one in gve_rx_dqo() stmmac: intel: set PCI_D3hot in suspend stmmac: intel: Enable PHY WOL option in EHL net: stmmac: option to enable PHY WOL with PMT enabled net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del} net: use netdev_info in ndo_dflt_fdb_{add,del} ptp: Set lookup cookie when creating a PTP PPS source. net: sock: add trace for socket errors net: sock: introduce sk_error_report net: dsa: replay the local bridge FDB entries pointing to the bridge dev too net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev net: dsa: include fdb entries pointing to bridge in the host fdb list net: dsa: include bridge addresses which are local in the host fdb list net: dsa: sync static FDB entries on foreign interfaces to hardware net: dsa: install the host MDB and FDB entries in the master's RX filter net: dsa: reference count the FDB addresses at the cross-chip notifier level net: dsa: introduce a separate cross-chip notifier type for host FDBs net: dsa: reference count the MDB entries at the cross-chip notifier level ...
2021-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-29/+57
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-29net: sock: introduce sk_error_reportAlexander Aring2-2/+2
This patch introduces a function wrapper to call the sk_error_report callback. That will prepare to add additional handling whenever sk_error_report is called, for example to trace socket errors. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28Merge tag 'fallthrough-fixes-clang-5.14-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo Silva: "Fix many fall-through warnings when building with Clang 12.0.0 and '-Wimplicit-fallthrough' so that we at some point will be able to enable that warning by default" * tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits) rxrpc: Fix fall-through warnings for Clang drm/nouveau/clk: Fix fall-through warnings for Clang drm/nouveau/therm: Fix fall-through warnings for Clang drm/nouveau: Fix fall-through warnings for Clang xfs: Fix fall-through warnings for Clang xfrm: Fix fall-through warnings for Clang tipc: Fix fall-through warnings for Clang sctp: Fix fall-through warnings for Clang rds: Fix fall-through warnings for Clang net/packet: Fix fall-through warnings for Clang net: netrom: Fix fall-through warnings for Clang ide: Fix fall-through warnings for Clang hwmon: (max6621) Fix fall-through warnings for Clang hwmon: (corsair-cpro) Fix fall-through warnings for Clang firewire: core: Fix fall-through warnings for Clang braille_console: Fix fall-through warnings for Clang ipv4: Fix fall-through warnings for Clang qlcnic: Fix fall-through warnings for Clang bnxt_en: Fix fall-through warnings for Clang netxen_nic: Fix fall-through warnings for Clang ...
2021-06-28sctp: add param size validation for SCTP_PARAM_SET_PRIMARYMarcelo Ricardo Leitner1-3/+10
When SCTP handles an INIT chunk, it calls for example: sctp_sf_do_5_1B_init sctp_verify_init sctp_verify_param sctp_process_init sctp_process_param handling of SCTP_PARAM_SET_PRIMARY sctp_verify_init() wasn't doing proper size validation and neither the later handling, allowing it to work over the chunk itself, possibly being uninitialized memory. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28sctp: validate chunk size in __rcv_asconf_lookupMarcelo Ricardo Leitner1-0/+3
In one of the fallbacks that SCTP has for identifying an association for an incoming packet, it looks for AddIp chunk (from ASCONF) and take a peek. Thing is, at this stage nothing was validating that the chunk actually had enough content for that, allowing the peek to happen over uninitialized memory. Similar check already exists in actual asconf handling in sctp_verify_asconf(). Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28sctp: add size validation when walking chunksMarcelo Ricardo Leitner1-1/+1
The first chunk in a packet is ensured to be present at the beginning of sctp_rcv(), as a packet needs to have at least 1 chunk. But the second one, may not be completely available and ch->length can be over uninitialized memory. Fix here is by only trying to walk on the next chunk if there is enough to hold at least the header, and then proceed with the ch->length validation that is already there. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28sctp: validate from_addr_param returnMarcelo Ricardo Leitner5-25/+43
Ilja reported that, simply putting it, nothing was validating that from_addr_param functions were operating on initialized memory. That is, the parameter itself was being validated by sctp_walk_params, but it doesn't check for types and their specific sizes and it could be a 0-length one, causing from_addr_param to potentially work over the next parameter or even uninitialized memory. The fix here is to, in all calls to from_addr_param, check if enough space is there for the wanted IP address type. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24sctp: send the next probe immediately once the last one is ackedXin Long1-1/+4
These is no need to wait for 'interval' period for the next probe if the last probe is already acked in search state. The 'interval' period waiting should be only for probe failure timeout and the current pmtu check when it's in search complete state. This change will shorten the probe time a lot in search state, and also fix the document accordingly. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24sctp: do black hole detection in search complete stateXin Long1-7/+4
Currently the PLPMUTD probe will stop for a long period (interval * 30) after it enters search complete state. If there's a pmtu change on the route path, it takes a long time to be aware if the ICMP TooBig packet is lost or filtered. As it says in rfc8899#section-4.3: "A DPLPMTUD method MUST NOT rely solely on this method." (ICMP PTB message). This patch is to enable the other method for search complete state: "A PL can use the DPLPMTUD probing mechanism to periodically generate probe packets of the size of the current PLPMTU." With this patch, the probe will continue with the current pmtu every 'interval' until the PMTU_RAISE_TIMER 'timeout', which we implement by adding raise_count to raise the probe size when it counts to 30 and removing the SCTP_PL_COMPLETE check for PMTU_RAISE_TIMER. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: process sctp over udp icmp err on sctp sideXin Long3-19/+62
Previously, sctp over udp was using udp tunnel's icmp err process, which only does sk lookup on sctp side. However for sctp's icmp error process, there are more things to do, like syncing assoc pmtu/retransmit packets for toobig type err, and starting proto_unreach_timer for unreach type err etc. Now after adding PLPMTUD, which also requires to process toobig type err on sctp side. This patch is to process icmp err on sctp side by parsing the type/code/info in .encap_err_lookup and call sctp's icmp processing functions. Note as the 'redirect' err process needs to know the outer ip(v6) header's, we have to leave it to udp(v6)_err to handle it. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: extract sctp_v4_err_handle function from sctp_v4_errXin Long1-57/+49
This patch is to extract sctp_v4_err_handle() from sctp_v4_err() to only handle the icmp err after the sock lookup, and it also makes the code clearer. sctp_v4_err_handle() will be used in sctp over udp's err handling in the following patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: extract sctp_v6_err_handle function from sctp_v6_errXin Long1-36/+40
This patch is to extract sctp_v6_err_handle() from sctp_v6_err() to only handle the icmp err after the sock lookup, and it also makes the code clearer. sctp_v6_err_handle() will be used in sctp over udp's err handling in the following patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: remove the unessessary hold for idev in sctp_v6_errXin Long1-10/+2
Same as in tcp_v6_err() and __udp6_lib_err(), there's no need to hold idev in sctp_v6_err(), so just call __in6_dev_get() instead. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: enable PLPMTUD when the transport is readyXin Long4-2/+13
sctp_transport_pl_reset() is called whenever any of these 3 members in transport is changed: - probe_interval - param_flags & SPP_PMTUD_ENABLE - state == ACTIVE If all are true, start the PLPMTUD when it's not yet started. If any of these is false, stop the PLPMTUD when it's already running. sctp_transport_pl_update() is called when the transport dst has changed. It will restart the PLPMTUD probe. Again, the pathmtu won't change but use the dst's mtu until the Search phase is done. Note that after using PLPMTUD, the pathmtu is only initialized with the dst mtu when the transport dst changes. At other time it is updated by pl.pmtu. So sctp_transport_pmtu_check() will be called only when PLPMTUD is disabled in sctp_packet_config(). After this patch, the PLPMTUD feature from RFC8899 will be activated and can be used by users. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: do state transition when receiving an icmp TOOBIG packetXin Long2-2/+53
PLPMTUD will short-circuit the old process for icmp TOOBIG packets. This part is described in rfc8899#section-4.6.2 (PL_PTB_SIZE = PTB_SIZE - other_headers_len). Note that from rfc8899#section-5.2 State Machine, each case below is for some specific states only: a) PL_PTB_SIZE < MIN_PLPMTU || PL_PTB_SIZE >= PROBED_SIZE, discard it, for any state b) MIN_PLPMTU < PL_PTB_SIZE < BASE_PLPMTU, Base -> Error, for Base state c) BASE_PLPMTU <= PL_PTB_SIZE < PLPMTU, Search -> Base or Complete -> Base, for Search and Complete states. d) PLPMTU < PL_PTB_SIZE < PROBED_SIZE, set pl.probe_size to PL_PTB_SIZE then verify it, for Search state. The most important one is case d), which will help find the optimal fast during searching. Like when pathmtu = 1392 for SCTP over IPv4, the search will be (20 is iphdr_len): 1. probe with 1200 - 20 2. probe with 1232 - 20 3. probe with 1264 - 20 ... 7. probe with 1388 - 20 8. probe with 1420 - 20 When sending the probe with 1420 - 20, TOOBIG may come with PL_PTB_SIZE = 1392 - 20. Then it matches case d), and saves some rounds to try with the 1392 - 20 probe. But of course, PLPMTUD doesn't trust TOOBIG packets, and it will go back to the common searching once the probe with the new size can't be verified. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: do state transition when a probe succeeds on HB ACK recv pathXin Long2-1/+39
As described in rfc8899#section-5.2, when a probe succeeds, there might be the following state transitions: - Base -> Search, occurs when probe succeeds with BASE_PLPMTU, pl.pmtu is not changing, pl.probe_size increases by SCTP_PL_BIG_STEP, - Error -> Search, occurs when probe succeeds with BASE_PLPMTU, pl.pmtu is changed from SCTP_MIN_PLPMTU to SCTP_BASE_PLPMTU, pl.probe_size increases by SCTP_PL_BIG_STEP. - Search -> Search Complete, occurs when probe succeeds with the probe size SCTP_MAX_PLPMTU less than pl.probe_high, pl.pmtu is not changing, but update *pathmtu* with it, pl.probe_size is set back to pl.pmtu to double check it. - Search Complete -> Search, occurs when probe succeeds with the probe size equal to pl.pmtu, pl.pmtu is not changing, pl.probe_size increases by SCTP_PL_MIN_STEP. So search process can be described as: 1. When it just enters 'Search' state, *pathmtu* is not updated with pl.pmtu, and probe_size increases by a big step (SCTP_PL_BIG_STEP) each round. 2. Until pl.probe_high is set when a probe fails, and probe_size decreases back to pl.pmtu, as described in the last patch. 3. When the probe with the new size succeeds, probe_size changes to increase by a small step (SCTP_PL_MIN_STEP) due to pl.probe_high is set. 4. Until probe_size is next to pl.probe_high, the searching finishes and it goes to 'Complete' state and updates *pathmtu* with pl.pmtu, and then probe_size is set to pl.pmtu to confirm by once more probe. 5. This probe occurs after "30 * probe_inteval", a much longer time than that in Search state. Once it is done it goes to 'Search' state again with probe_size increased by SCTP_PL_MIN_STEP. As we can see above, during the searching, pl.pmtu changes while *pathmtu* doesn't. *pathmtu* is only updated when the search finishes by which it gets an optimal value for it. A big step is used at the beginning until it gets close to the optimal value, then it changes to a small step until it has this optimal value. The small step is also used in 'Complete' until it goes to 'Search' state again and the probe with 'pmtu + the small step' succeeds, which means a higher size could be used. Then probe_size changes to increase by a big step again until it gets close to the next optimal value. Note that anytime when black hole is detected, it goes directly to 'Base' state with pl.pmtu set to SCTP_BASE_PLPMTU, as described in the last patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: do state transition when PROBE_COUNT == MAX_PROBES on HB send pathXin Long2-0/+46
The state transition is described in rfc8899#section-5.2, PROBE_COUNT == MAX_PROBES means the probe fails for MAX times, and the state transition includes: - Base -> Error, occurs when BASE_PLPMTU Confirmation Fails, pl.pmtu is set to SCTP_MIN_PLPMTU, probe_size is still SCTP_BASE_PLPMTU; - Search -> Base, occurs when Black Hole Detected, pl.pmtu is set to SCTP_BASE_PLPMTU, probe_size is set back to SCTP_BASE_PLPMTU; - Search Complete -> Base, occurs when Black Hole Detected pl.pmtu is set to SCTP_BASE_PLPMTU, probe_size is set back to SCTP_BASE_PLPMTU; Note a black hole is encountered when a sender is unaware that packets are not being delivered to the destination endpoint. So it includes the probe failures with equal probe_size to pl.pmtu, and definitely not include that with greater probe_size than pl.pmtu. The later one is the normal probe failure where probe_size should decrease back to pl.pmtu and pl.probe_high is set. pl.probe_high would be used on HB ACK recv path in the next patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: do the basic send and recv for PLPMTUD probeXin Long4-6/+62
This patch does exactly what rfc8899#section-6.2.1.2 says: The SCTP sender needs to be able to determine the total size of a probe packet. The HEARTBEAT chunk could carry a Heartbeat Information parameter that includes, besides the information suggested in [RFC4960], the probe size to help an implementation associate a HEARTBEAT ACK with the size of probe that was sent. The sender could also use other methods, such as sending a nonce and verifying the information returned also contains the corresponding nonce. The length of the PAD chunk is computed by reducing the probing size by the size of the SCTP common header and the HEARTBEAT chunk. Note that HB ACK chunk will carry back whatever HB chunk carried, including the probe_size we put it in; We also check hbinfo->probe_size in the HB ACK against link->pl.probe_size to validate this HB ACK chunk. v1->v2: - Remove the unused 'sp' and add static for sctp_packet_bundle_pad(). Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add the probe timer in transport for PLPMTUDXin Long5-0/+93
There are 3 timers described in rfc8899#section-5.1.1: PROBE_TIMER, PMTU_RAISE_TIMER, CONFIRMATION_TIMER This patches adds a 'probe_timer' in transport, and it works as either PROBE_TIMER or PMTU_RAISE_TIMER. At most time, it works as PROBE_TIMER and expires every a 'probe_interval' time to send the HB probe packet. When transport pl enters COMPLETE state, it works as PMTU_RAISE_TIMER and expires in 'probe_interval * 30' time to go back to SEARCH state and do searching again. SCTP HB is an acknowledged packet, CONFIRMATION_TIMER is not needed. The timer will start when transport pl enters BASE state and stop when it enters DISABLED state. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add SCTP_PLPMTUD_PROBE_INTERVAL sockopt for sock/asoc/transportXin Long1-0/+118
With this socket option, users can change probe_interval for a transport, asoc or sock after it's created. Note that if the change is for an asoc, also apply the change to each transport in this asoc. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add probe_interval in sysctl and sock/asoc/transportXin Long3-0/+38
PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'. 'n' is the interval for PLPMTUD probe timer in milliseconds, and it can't be less than 5000 if it's not 0. All asoc/transport's PLPMTUD in a new socket will be enabled by default. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add pad chunk and its make function and event tableXin Long2-0/+49
This chunk is defined in rfc4820#section-3, and used to pad an SCTP packet. The receiver must discard this chunk and continue processing the rest of the chunks in the packet. Add it now, as it will be bundled with a heartbeat chunk to probe pmtu in the following patches. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-31sctp: sm_statefuns: Fix spelling mistakesZheng Yongjun1-15/+15
Fix some spelling mistakes in comments: genereate ==> generate correclty ==> correctly boundries ==> boundaries failes ==> fails isses ==> issues assocition ==> association signe ==> sign assocaition ==> association managemement ==> management restransmissions ==> retransmission sideffect ==> sideeffect bomming ==> booming chukns ==> chunks SHUDOWN ==> SHUTDOWN violationg ==> violating explcitly ==> explicitly CHunk ==> Chunk Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20210601020801.3625358-1-zhengyongjun3@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-1/+2
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-25sctp: fix the proc_handler for sysctl encap_portXin Long1-1/+1
proc_dointvec() cannot do min and max check for setting a value when extra1/extra2 is set, so change it to proc_dointvec_minmax() for sysctl encap_port. Fixes: e8a3001c2120 ("sctp: add encap_port for netns sock asoc and transport") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25sctp: add the missing setting for asoc encap_portXin Long1-0/+1
This patch is to add the missing setting back for asoc encap_port. Fixes: 8dba29603b5c ("sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17sctp: Fix fall-through warnings for ClangGustavo A. R. Silva1-1/+2
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding a break statement and replacing a comment with a goto statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-05-17net: Remove the member netns_okYejune Deng1-1/+0
Every protocol has the 'netns_ok' member and it is euqal to 1. The 'if (!prot->netns_ok)' always false in inet_add_protocol(). Signed-off-by: Yejune Deng <yejunedeng@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-03sctp: delay auto_asconf init until binding the first addrXin Long1-14/+17
As Or Cohen described: If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock held and sp->do_auto_asconf is true, then an element is removed from the auto_asconf_splist without any proper locking. This can happen in the following functions: 1. In sctp_accept, if sctp_sock_migrate fails. 2. In inet_create or inet6_create, if there is a bpf program attached to BPF_CGROUP_INET_SOCK_CREATE which denies creation of the sctp socket. This patch is to fix it by moving the auto_asconf init out of sctp_init_sock(), by which inet_create()/inet6_create() won't need to operate it in sctp_destroy_sock() when calling sk_common_release(). It also makes more sense to do auto_asconf init while binding the first addr, as auto_asconf actually requires an ANY addr bind, see it in sctp_addr_wq_timeout_handler(). This addresses CVE-2021-23133. Fixes: 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications") Reported-by: Or Cohen <orcohen@paloaltonetworks.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-03Revert "net/sctp: fix race condition in sctp_destroy_sock"Xin Long1-5/+8
This reverts commit b166a20b07382b8bc1dcee2a448715c9c2c81b5b. This one has to be reverted as it introduced a dead lock, as syzbot reported: CPU0 CPU1 ---- ---- lock(&net->sctp.addr_wq_lock); lock(slock-AF_INET6); lock(&net->sctp.addr_wq_lock); lock(slock-AF_INET6); CPU0 is the thread of sctp_addr_wq_timeout_handler(), and CPU1 is that of sctp_close(). The original issue this commit fixed will be fixed in the next patch. Reported-by: syzbot+959223586843e69a2674@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-03sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_bXin Long1-1/+2
Normally SCTP_MIB_CURRESTAB is always incremented once asoc enter into ESTABLISHED from the state < ESTABLISHED and decremented when the asoc is being deleted. However, in sctp_sf_do_dupcook_b(), the asoc's state can be changed to ESTABLISHED from the state >= ESTABLISHED where it shouldn't increment SCTP_MIB_CURRESTAB. Otherwise, one asoc may increment MIB_CURRESTAB multiple times but only decrement once at the end. I was able to reproduce it by using scapy to do the 4-way shakehands, after that I replayed the COOKIE-ECHO chunk with 'peer_vtag' field changed to different values, and SCTP_MIB_CURRESTAB was incremented multiple times and never went back to 0 even when the asoc was freed. This patch is to fix it by only incrementing SCTP_MIB_CURRESTAB when the state < ESTABLISHED in sctp_sf_do_dupcook_b(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-03Revert "sctp: Fix SHUTDOWN CTSN Ack in the peer restart case"Xin Long1-5/+1
This reverts commit 12dfd78e3a74825e6f0bc8df7ef9f938fbc6bfe3. This can be reverted as shutdown and cookie_ack chunk are using the same asoc since commit 35b4f24415c8 ("sctp: do asoc update earlier in sctp_sf_do_dupcook_a"). Reported-by: Jere Leppänen <jere.leppanen@nokia.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-03Revert "Revert "sctp: Fix bundling of SHUTDOWN with COOKIE-ACK""Xin Long1-3/+3
This reverts commit 7e9269a5acec6d841d22e12770a0b02db4f5d8f2. As Jere notice, commit 35b4f24415c8 ("sctp: do asoc update earlier in sctp_sf_do_dupcook_a") only keeps the SHUTDOWN and COOKIE-ACK with the same asoc, not transport. So we have to bring this patch back. Reported-by: Jere Leppänen <jere.leppanen@nokia.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30sctp: do asoc update earlier in sctp_sf_do_dupcook_bXin Long2-43/+30
The same thing should be done for sctp_sf_do_dupcook_b(). Meanwhile, SCTP_CMD_UPDATE_ASSOC cmd can be removed. v1->v2: - Fix the return value in sctp_sf_do_assoc_update(). Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30Revert "sctp: Fix bundling of SHUTDOWN with COOKIE-ACK"Xin Long1-3/+3
This can be reverted as shutdown and cookie_ack chunk are using the same asoc since the last patch. This reverts commit 145cb2f7177d94bc54563ed26027e952ee0ae03c. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30sctp: do asoc update earlier in sctp_sf_do_dupcook_aXin Long1-5/+20
There's a panic that occurs in a few of envs, the call trace is as below: [] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI [] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp] [] sctp_assoc_control_transport+0x1b9/0x210 [sctp] [] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp] [] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp] [] sctp_do_sm+0xc3/0x2a0 [sctp] [] sctp_generate_timeout_event+0x81/0xf0 [sctp] This is caused by a transport use-after-free issue. When processing a duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK and SHUTDOWN chunks are allocated with the transort from the new asoc. However, later in the sideeffect machine, the old asoc is used to send them out and old asoc's shutdown_last_sent_to is set to the transport that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually belongs to the new asoc. After the new_asoc is freed and the old asoc T2 timeout, the old asoc's shutdown_last_sent_to that is already freed would be accessed in sctp_sf_t2_timer_expire(). Thanks Alexander and Jere for helping dig into this issue. To fix it, this patch is to do the asoc update first, then allocate the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This would make more sense, as a chunk from an asoc shouldn't be sent out with another asoc. We had fixed quite a few issues caused by this. Fixes: 145cb2f7177d ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK") Reported-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reported-by: syzbot+bbe538efd1046586f587@syzkaller.appspotmail.com Reported-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-8/+5
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-16sctp: Fix out-of-bounds warning in sctp_process_asconf_param()Gustavo A. R. Silva1-1/+1
Fix the following out-of-bounds warning: net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds] This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13net/sctp: fix race condition in sctp_destroy_sockOr Cohen1-8/+5
If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock held and sp->do_auto_asconf is true, then an element is removed from the auto_asconf_splist without any proper locking. This can happen in the following functions: 1. In sctp_accept, if sctp_sock_migrate fails. 2. In inet_create or inet6_create, if there is a bpf program attached to BPF_CGROUP_INET_SOCK_CREATE which denies creation of the sctp socket. The bug is fixed by acquiring addr_wq_lock in sctp_destroy_sock instead of sctp_close. This addresses CVE-2021-23133. Reported-by: Or Cohen <orcohen@paloaltonetworks.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Fixes: 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications") Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+3
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-05net-ipv6: bugfix - raw & sctp - switch to ipv6_can_nonlocal_bind()Maciej Żenczykowski1-4/+3
Found by virtue of ipv6 raw sockets not honouring the per-socket IP{,V6}_FREEBIND setting. Based on hits found via: git grep '[.]ip_nonlocal_bind' We fix both raw ipv6 sockets to honour IP{,V6}_FREEBIND and IP{,V6}_TRANSPARENT, and we fix sctp sockets to honour IP{,V6}_TRANSPARENT (they already honoured FREEBIND), and not just the ipv6 'ip_nonlocal_bind' sysctl. The helper is defined as: static inline bool ipv6_can_nonlocal_bind(struct net *net, struct inet_sock *inet) { return net->ipv6.sysctl.ip_nonlocal_bind || inet->freebind || inet->transparent; } so this change only widens the accepted opt-outs and is thus a clean bugfix. I'm not entirely sure what 'fixes' tag to add, since this is AFAICT an ancient bug, but IMHO this should be applied to stable kernels as far back as possible. As such I'm adding a 'fixes' tag with the commit that originally added the helper, which happened in 4.19. Backporting to older LTS kernels (at least 4.9 and 4.14) would presumably require open-coding it or backporting the helper as well. Other possibly relevant commits: v4.18-rc6-1502-g83ba4645152d net: add helpers checking if socket can be bound to nonlocal address v4.18-rc6-1431-gd0c1f01138c4 net/ipv6: allow any source address for sendmsg pktinfo with ip_nonlocal_bind v4.14-rc5-271-gb71d21c274ef sctp: full support for ipv6 ip_nonlocal_bind & IP_FREEBIND v4.7-rc7-1883-g9b9742022888 sctp: support ipv6 nonlocal bind v4.1-12247-g35a256fee52c ipv6: Nonlocal bind Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 83ba4645152d ("net: add helpers checking if socket can be bound to nonlocal address") Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-By: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-28net: sctp: Fix some typosLu Wei2-2/+2
Modify "unkown" to "unknown" in net/sctp/sm_make_chunk.c and Modify "orginal" to "original" in net/sctp/socket.c. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Lu Wei <luwei32@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-28sm_statefuns.c: Mundane spello fixesBhaskar Chowdhury1-5/+5
s/simulataneous/simultaneous/ ....in three dirrent places. s/tempory/temporary/ s/interpeter/interpreter/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19sctp: move sk_route_caps check and set into sctp_outq_flush_transportsXin Long2-7/+7
The sk's sk_route_caps is set in sctp_packet_config, and later it only needs to change when traversing the transport_list in a loop, as the dst might be changed in the tx path. So move sk_route_caps check and set into sctp_outq_flush_transports from sctp_packet_transmit. This also fixes a dst leak reported by Chen Yi: https://bugzilla.kernel.org/show_bug.cgi?id=212227 As calling sk_setup_caps() in sctp_packet_transmit may also set the sk_route_caps for the ctrl sock in a netns. When the netns is being deleted, the ctrl sock's releasing is later than dst dev's deleting, which will cause this dev's deleting to hang and dmesg error occurs: unregister_netdevice: waiting for xxx to become free. Usage count = 1 Reported-by: Chen Yi <yiche@redhat.com> Fixes: bcd623d8e9fa ("sctp: call sk_setup_caps in sctp_packet_transmit instead") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04net: sctp: trivial: fix typo in commentDrew Fustini1-1/+1
Fix typo of 'overflow' for comment in sctp_tsnmap_check(). Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Drew Fustini <drew@beagleboard.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 15:47:43 +0000