| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
|
|
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently if SCTP closes the receive window with window pressure, mostly
caused by excessive skb overhead on payload/overheads ratio, SCTP will
close the window abruptly while saving the delta on rwnd_press. It will
start recovering rwnd as the chunks are consumed by the application and
the rwnd_press will be only recovered after rwnd reach the same value as
of rwnd_press, mostly to prevent silly window syndrome.
Thing is, this is very inefficient with small data chunks, as with those
it will never reach back that value, and thus it will never recover from
such pressure. This means that we will not issue window updates when
recovering from 0 window and will rely on a sender retransmit to notice
it.
The fix here is to remove such threshold, as no value is good enough: it
depends on the (avg) chunk sizes being used.
Test with netperf -t SCTP_STREAM -- -m 1, and trigger 0 window by
sending SIGSTOP to netserver, sleep 1.2, and SIGCONT.
Rate limited to 845kbps, for visibility. Capture done at netserver side.
Previously:
01.500751 IP B.48277 > A.36925: sctp (1) [SACK] [cum ack 632372996] [a_rwnd 99153] [
01.500752 IP A.36925 > B.48277: sctp (1) [DATA] (B)(E) [TSN: 632372997] [SID: 0] [SS
01.517471 IP A.36925 > B.48277: sctp (1) [DATA] (B)(E) [TSN: 632373010] [SID: 0] [SS
01.517483 IP B.48277 > A.36925: sctp (1) [SACK] [cum ack 632373009] [a_rwnd 0] [#gap
01.517485 IP A.36925 > B.48277: sctp (1) [DATA] (B)(E) [TSN: 632373083] [SID: 0] [SS
01.517488 IP B.48277 > A.36925: sctp (1) [SACK] [cum ack 632373009] [a_rwnd 0] [#gap
01.534168 IP A.36925 > B.48277: sctp (1) [DATA] (B)(E) [TSN: 632373096] [SID: 0] [SS
01.534180 IP B.48277 > A.36925: sctp (1) [SACK] [cum ack 632373009] [a_rwnd 0] [#gap
01.534181 IP A.36925 > B.48277: sctp (1) [DATA] (B)(E) [TSN: 632373169] [SID: 0] [SS
01.534185 IP B.48277 > A.36925: sctp (1) [SACK] [cum ack 632373009] [a_rwnd 0] [#gap
02.525978 IP A.36925 > B.48277: sctp (1) [DATA] (B)(E) [TSN: 632373010] [SID: 0] [SS
02.526021 IP B.48277 > A.36925: sctp (1) [SACK] [cum ack 632373009] [a_rwnd 0] [#gap
(window update missed)
04.573807 IP A.36925 > B.48277: sctp (1) [DATA] (B)(E) [TSN: 632373010] [SID: 0] [SS
04.779370 IP B.48277 > A.36925: sctp (1) [SACK] [cum ack 632373082] [a_rwnd 859] [#g
04.789162 IP A.36925 > B.48277: sctp (1) [DATA] (B)(E) [TSN: 632373083] [SID: 0] [SS
04.789323 IP A.36925 > B.48277: sctp (1) [DATA] (B)(E) [TSN: 632373156] [SID: 0] [SS
04.789372 IP B.48277 > A.36925: sctp (1) [SACK] [cum ack 632373228] [a_rwnd 786] [#g
After:
02.568957 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098728] [a_rwnd 99153]
02.568961 IP A.55173 > B.50536: sctp (1) [DATA] (B)(E) [TSN: 2490098729] [SID: 0] [S
02.585631 IP A.55173 > B.50536: sctp (1) [DATA] (B)(E) [TSN: 2490098742] [SID: 0] [S
02.585666 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 0] [#ga
02.585671 IP A.55173 > B.50536: sctp (1) [DATA] (B)(E) [TSN: 2490098815] [SID: 0] [S
02.585683 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 0] [#ga
02.602330 IP A.55173 > B.50536: sctp (1) [DATA] (B)(E) [TSN: 2490098828] [SID: 0] [S
02.602359 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 0] [#ga
02.602363 IP A.55173 > B.50536: sctp (1) [DATA] (B)(E) [TSN: 2490098901] [SID: 0] [S
02.602372 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 0] [#ga
03.600788 IP A.55173 > B.50536: sctp (1) [DATA] (B)(E) [TSN: 2490098742] [SID: 0] [S
03.600830 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 0] [#ga
03.619455 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 13508]
03.619479 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 27017]
03.619497 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 40526]
03.619516 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 54035]
03.619533 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 67544]
03.619552 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 81053]
03.619570 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098741] [a_rwnd 94562]
(following data transmission triggered by window updates above)
03.633504 IP A.55173 > B.50536: sctp (1) [DATA] (B)(E) [TSN: 2490098742] [SID: 0] [S
03.836445 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098814] [a_rwnd 100000]
03.843125 IP A.55173 > B.50536: sctp (1) [DATA] (B)(E) [TSN: 2490098815] [SID: 0] [S
03.843285 IP A.55173 > B.50536: sctp (1) [DATA] (B)(E) [TSN: 2490098888] [SID: 0] [S
03.843345 IP B.50536 > A.55173: sctp (1) [SACK] [cum ack 2490098960] [a_rwnd 99894]
03.856546 IP A.55173 > B.50536: sctp (1) [DATA] (B)(E) [TSN: 2490098961] [SID: 0] [S
03.866450 IP A.55173 > B.50536: sctp (1) [DATA] (B)(E) [TSN: 2490099011] [SID: 0] [S
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's possible that we receive a packet that is larger than current
window. If it's the first packet in this way, it will cause it to
increase rwnd_over. Then, if we receive another data chunk (specially as
SCTP allows you to have one data chunk in flight even during 0 window),
rwnd_over will be overwritten instead of added to.
In the long run, this could cause the window to grow bigger than its
initial size, as rwnd_over would be charged only for the last received
data chunk while the code will try open the window for all packets that
were received and had its value in rwnd_over overwritten. This, then,
can lead to the worsening of payload/buffer ratio and cause rwnd_press
to kick in more often.
The fix is to sum it too, same as is done for rwnd_press, so that if we
receive 3 chunks after closing the window, we still have to release that
same amount before re-opening it.
Log snippet from sctp_test exhibiting the issue:
[ 146.209232] sctp: sctp_assoc_rwnd_decrease: asoc:ffff88013928e000
rwnd decreased by 1 to (0, 1, 114221)
[ 146.209232] sctp: sctp_assoc_rwnd_decrease:
association:ffff88013928e000 has asoc->rwnd:0, asoc->rwnd_over:1!
[ 146.209232] sctp: sctp_assoc_rwnd_decrease: asoc:ffff88013928e000
rwnd decreased by 1 to (0, 1, 114221)
[ 146.209232] sctp: sctp_assoc_rwnd_decrease:
association:ffff88013928e000 has asoc->rwnd:0, asoc->rwnd_over:1!
[ 146.209232] sctp: sctp_assoc_rwnd_decrease: asoc:ffff88013928e000
rwnd decreased by 1 to (0, 1, 114221)
[ 146.209232] sctp: sctp_assoc_rwnd_decrease:
association:ffff88013928e000 has asoc->rwnd:0, asoc->rwnd_over:1!
[ 146.209232] sctp: sctp_assoc_rwnd_decrease: asoc:ffff88013928e000
rwnd decreased by 1 to (0, 1, 114221)
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp.local_addr_list is a global address list that is supposed to include
all the local addresses. sctp updates this list according to NETDEV_UP/
NETDEV_DOWN notifications.
However, if multiple NICs have the same address, the global list would
have duplicate addresses. Even if for one NIC, promote secondaries in
__inet_del_ifa can also lead to accumulating duplicate addresses.
When sctp binds address 'ANY' and creates a connection, it copies all
the addresses from global list into asoc's bind addr list, which makes
sctp pack the duplicate addresses into INIT/INIT_ACK packets.
This patch is to filter the duplicate addresses when copying the addrs
from global list in sctp_copy_local_addr_list and unpacking addr_param
from cookie in sctp_raw_to_bind_addrs to asoc's bind addr list.
Note that we can't filter the duplicate addrs when global address list
gets updated, As NETDEV_DOWN event may remove an addr that still exists
in another NIC.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to reduce indent level by using continue when the addr
is not allowed, and also drop end_copy by using break.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
null
Prior to this patch, sctp_transport_lookup_process didn't rcu_read_unlock
when it failed to find a transport by sctp_addrs_lookup_transport.
This patch is to fix it by moving up rcu_read_unlock right before checking
transport and also to remove the out path.
Fixes: 1cceda784980 ("sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 7fda702f9315 ("sctp: use new rhlist interface on sctp transport
rhashtable"), sctp has changed to use rhlist_lookup to look up transport, but
rhlist_lookup doesn't call rcu_read_lock inside, unlike rhashtable_lookup_fast.
It is called in sctp_epaddr_lookup_transport and sctp_addrs_lookup_transport.
sctp_addrs_lookup_transport is always in the protection of rcu_read_lock(),
as __sctp_lookup_association is called in rx path or sctp_lookup_association
which are in the protection of rcu_read_lock() already.
But sctp_epaddr_lookup_transport is called by sctp_endpoint_lookup_assoc, it
doesn't call rcu_read_lock, which may cause "suspicious rcu_dereference_check
usage' in __rhashtable_lookup.
This patch is to fix it by adding rcu_read_lock in sctp_endpoint_lookup_assoc
before calling sctp_epaddr_lookup_transport.
Fixes: 7fda702f9315 ("sctp: use new rhlist interface on sctp transport rhashtable")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now sctp transport rhashtable uses hash(lport, dport, daddr) as the key
to hash a node to one chain. If in one host thousands of assocs connect
to one server with the same lport and different laddrs (although it's
not a normal case), all the transports would be hashed into the same
chain.
It may cause to keep returning -EBUSY when inserting a new node, as the
chain is too long and sctp inserts a transport node in a loop, which
could even lead to system hangs there.
The new rhlist interface works for this case that there are many nodes
with the same key in one chain. It puts them into a list then makes this
list be as a node of the chain.
This patch is to replace rhashtable_ interface with rhltable_ interface.
Since a chain would not be too long and it would not return -EBUSY with
this fix when inserting a node, the reinsert loop is also removed here.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several cases of bug fixes in 'net' overlapping other changes in
'net-next-.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now when users shutdown a sock with SEND_SHUTDOWN in sctp, even if
this sock has no connection (assoc), sk state would be changed to
SCTP_SS_CLOSING, which is not as we expect.
Besides, after that if users try to listen on this sock, kernel
could even panic when it dereference sctp_sk(sk)->bind_hash in
sctp_inet_listen, as bind_hash is null when sock has no assoc.
This patch is to move sk state change after checking sk assocs
is not empty, and also merge these two if() conditions and reduce
indent level.
Fixes: d46e416c11c8 ("sctp: sctp should change socket state when shutdown is received")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_wait_for_connect() currently already holds the asoc to keep it
alive during the sleep, in case another thread release it. But Andrey
Konovalov and Dmitry Vyukov reported an use-after-free in such
situation.
Problem is that __sctp_connect() doesn't get a ref on the asoc and will
do a read on the asoc after calling sctp_wait_for_connect(), but by then
another thread may have closed it and the _put on sctp_wait_for_connect
will actually release it, causing the use-after-free.
Fix is, instead of doing the read after waiting for the connect, do it
before so, and avoid this issue as the socket is still locked by then.
There should be no issue on returning the asoc id in case of failure as
the application shouldn't trust on that number in such situations
anyway.
This issue doesn't exist in sctp_sendmsg() path.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After adding sctp gso, sctp_packet_transmit is a quite big function now.
This patch is to extract the codes for packing packet to sctp_packet_pack
from sctp_packet_transmit, and add some comments, simplify the err path by
freeing auth chunk when freeing packet chunk_list in out path and freeing
head skb early if it fails to pack packet.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prior to this patch, in rx path, before calling lock_sock, it needed to
hold assoc when got it by __sctp_lookup_association, in case other place
would free/put assoc.
But in __sctp_lookup_association, it lookup and hold transport, then got
assoc by transport->assoc, then hold assoc and put transport. It means
it didn't hold transport, yet it was returned and later on directly
assigned to chunk->transport.
Without the protection of sock lock, the transport may be freed/put by
other places, which would cause a use-after-free issue.
This patch is to fix this issue by holding transport instead of assoc.
As holding transport can make sure to access assoc is also safe, and
actually it looks up assoc by searching transport rhashtable, to hold
transport here makes more sense.
Note that the function will be renamed later on on another patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prior to this patch, it used a local variable to save the transport that is
looked up by __sctp_lookup_association(), and didn't return it back. But in
sctp_rcv, it is used to initialize chunk->transport. So when hitting this,
even if it found the transport, it was still initializing chunk->transport
with null instead.
This patch is to return the transport back through transport pointer
that is from __sctp_rcv_lookup_harder().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In sctp_transport_lookup_process(), Commit 1cceda784980 ("sctp: fix
the issue sctp_diag uses lock_sock in rcu_read_lock") moved cb() out
of rcu lock, but it put transport and hold assoc instead, and ignore
that cb() still uses transport. It may cause a use-after-free issue.
This patch is to hold transport instead of assoc there.
Fixes: 1cceda784980 ("sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mostly simple overlapping changes.
For example, David Ahern's adjacency list revamp in 'net-next'
conflicted with an adjacency list traversal bug fix in 'net'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrey Konovalov reported that KASAN detected that SCTP was using a slab
beyond the boundaries. It was caused because when handling out of the
blue packets in function sctp_sf_ootb() it was checking the chunk len
only after already processing the first chunk, validating only for the
2nd and subsequent ones.
The fix is to just move the check upwards so it's also validated for the
1st chunk.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 7303a1475008 ("sctp: identify chunks that need to be fragmented
at IP level") made the chunk be fragmented at IP level in the next round
if it's size exceed PMTU.
But there still is another case, PMTU can be updated if transport's dst
expires and transport's pmtu_pending is set in sctp_packet_transmit. If
the new PMTU is less than the chunk, the same issue with that commit can
be triggered.
So we should drop this packet and let it retransmit in another round
where it would be fragmented at IP level.
This patch is to fix it by checking the chunk size after PMTU may be
updated and dropping this packet if it's size exceed PMTU.
Fixes: 90017accff61 ("sctp: Add GSO support")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@txudriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of getsockopt handlers in net/sctp/socket.c check len against
sizeof some structure like:
if (len < sizeof(int))
return -EINVAL;
On the first look, the check seems to be correct. But since len is int
and sizeof returns size_t, int gets promoted to unsigned size_t too. So
the test returns false for negative lengths. Yes, (-1 < sizeof(long)) is
false.
Fix this in sctp by explicitly checking len < 0 before any getsockopt
handler is called.
Note that sctp_getsockopt_events already handled the negative case.
Since we added the < 0 check elsewhere, this one can be removed.
If not checked, this is the result:
UBSAN: Undefined behaviour in ../mm/page_alloc.c:2722:19
shift exponent 52 is too large for 32-bit type 'int'
CPU: 1 PID: 24535 Comm: syz-executor Not tainted 4.8.1-0-syzkaller #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
0000000000000000 ffff88006d99f2a8 ffffffffb2f7bdea 0000000041b58ab3
ffffffffb4363c14 ffffffffb2f7bcde ffff88006d99f2d0 ffff88006d99f270
0000000000000000 0000000000000000 0000000000000034 ffffffffb5096422
Call Trace:
[<ffffffffb3051498>] ? __ubsan_handle_shift_out_of_bounds+0x29c/0x300
...
[<ffffffffb273f0e4>] ? kmalloc_order+0x24/0x90
[<ffffffffb27416a4>] ? kmalloc_order_trace+0x24/0x220
[<ffffffffb2819a30>] ? __kmalloc+0x330/0x540
[<ffffffffc18c25f4>] ? sctp_getsockopt_local_addrs+0x174/0xca0 [sctp]
[<ffffffffc18d2bcd>] ? sctp_getsockopt+0x10d/0x1b0 [sctp]
[<ffffffffb37c1219>] ? sock_common_getsockopt+0xb9/0x150
[<ffffffffb37be2f5>] ? SyS_getsockopt+0x1a5/0x270
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-sctp@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The prsctp polices include ttl expires policy already, we should remove
the old ttl expires codes, and just adjust the new polices' codes to be
compatible with the old one for users.
This patch is to remove all the old expires codes, and if prsctp polices
are not set, it will still set msg's expires_at and check the expires in
sctp_check_abandoned.
Note that asoc->prsctp_enable is set by default, so users can't feel any
difference even if they use the old expires api in userspace.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now sctp uses chunk->resent to record if a chunk is retransmitted, for
RTT measurements with retransmitted DATA chunks. chunk->sent_count was
introduced to record how many times one chunk has been sent for prsctp
RTX policy before. We actually can know if one chunk is retransmitted
by checking chunk->sent_count is greater than 1.
This patch is to remove resent from sctp_chunk and reuse sent_count
to avoid retransmitted chunks for RTT measurements.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Three sets of overlapping changes. Nothing serious.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When sctp dumps all the ep->assocs, it needs to lock_sock first,
but now it locks sock in rcu_read_lock, and lock_sock may sleep,
which would break rcu_read_lock.
This patch is to get and hold one sock when traversing the list.
After that and get out of rcu_read_lock, lock and dump it. Then
it will traverse the list again to get the next one until all
sctp socks are dumped.
For sctp_diag_dump_one, it fixes this issue by holding asoc and
moving cb() out of rcu_read_lock in sctp_transport_lookup_process.
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now before using prsctp polices, sctp uses asoc->prsctp_enable to
check if prsctp is enabled. However asoc->prsctp_enable is set only
means local host support prsctp, sctp should not abandon packet if
peer host doesn't enable prsctp.
So this patch is to use asoc->peer.prsctp_capable to check if prsctp
is enabled on both side, instead of asoc->prsctp_enable, as asoc's
peer.prsctp_capable is set only when local and peer both enable prsctp.
Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now sctp uses chunk->prsctp_param to save the prsctp param for all the
prsctp polices, we didn't need to introduce prsctp_param to sctp_chunk.
We can just use chunk->sinfo.sinfo_timetolive for RTX and BUF polices,
and reuse msg->expires_at for TTL policy, as the prsctp polices and old
expires policy are mutual exclusive.
This patch is to remove prsctp_param from sctp_chunk, and reuse msg's
expires_at for TTL and chunk's sinfo.sinfo_timetolive for RTX and BUF
polices.
Note that sctp can't use chunk's sinfo.sinfo_timetolive for TTL policy,
as it needs a u64 variables to save the expires_at time.
This one also fixes the "netperf-Throughput_Mbps -37.2% regression"
issue.
Fixes: a6c2f792873a ("sctp: implement prsctp TTL policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is to suppress the checkpatch.pl warning "Comparison to NULL
could be written". No functional changes here.
Signed-off-by: Jia He <hejianet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is to use the generic interfaces snmp_get_cpu_field{,64}_batch to
aggregate the data by going through all the items of each cpu sequentially.
Signed-off-by: Jia He <hejianet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_acked() is using 32bit arithmetics on 16bits vars, via TSN_lte()
macros, which is weird and confusing.
Once the offset to ctsn is calculated, all wrapping is already handled
and thus to verify the Gap Ack blocks we can just use pure
less/big-or-equal than checks.
Also, rename gap variable to tsn_offset, so it's more meaningful, as
it doesn't point to any gap at all.
Even so, I don't think this discrepancy resulted in any practical bug.
This patch is a preparation for the next one, which will introduce
typecheck() for TSN_lte() macros and would cause a compile error here.
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
And avoid the usage of '&~3'. This is the last place still not using
the macro.
Also break the line to make it easier to read.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To something more meaningful these days, specially because this is
working on packet headers or lengths and which are not tied to any CPU
arch but to the protocol itself.
So, WORD_TRUNC becomes SCTP_TRUNC4 and WORD_ROUND becomes SCTP_PAD4.
Reported-by: David Laight <David.Laight@ACULAB.COM>
Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit 311b21774f13 ("sctp: simplify sk_receive_queue locking"), a call
to 'skb_queue_splice_tail_init()' has been made explicit. Previously it was
hidden in 'sctp_skb_list_tail()'
Now, the code around it looks redundant. The '_init()' part of
'skb_queue_splice_tail_init()' should already do the same.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As David and Marcelo's suggestion, ENOMEM err shouldn't return back to
user in transmit path. Instead, sctp's retransmit would take care of
the chunks that fail to send because of ENOMEM.
This patch is only to do some release job when alloc_skb fails, not to
return ENOMEM back any more.
Besides, it also cleans up sctp_packet_transmit's err path, and fixes
some issues in err path:
- It didn't free the head skb in nomem: path.
- No need to check nskb in no_route: path.
- It should goto err: path if alloc_skb fails for head.
- Not all the NOMEMs should free nskb.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_outq_flush return value is meaningless now, this patch is
to make sctp_outq_flush return void, as well as sctp_outq_fail
and sctp_outq_uncork.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Every time when sctp calls sctp_outq_flush, it sends out the chunks of
control queue, retransmit queue and data queue. Even if some trunks are
failed to transmit, it still has to flush all the transports, as it's
the only chance to clean that transmit_list.
So the latest transmit error here should be returned back. This transmit
error is an internal error of sctp stack.
I checked all the places where it uses the transmit error (the return
value of sctp_outq_flush), most of them are actually just save it to
sk_err.
Except for sctp_assoc/endpoint_bh_rcv, they will drop the chunk if
it's failed to send a REPLY, which is actually incorrect, as we can't
be sure the error that sctp_outq_flush returns is from sending that
REPLY.
So it's meaningless for sctp_outq_flush to return error back.
This patch is to save transmit error to sk_err in sctp_outq_flush, the
new error can update the old value. Eventually, sctp_wait_for_* would
check for it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Last patch "sctp: do not return the transmit err back to sctp_sendmsg"
made sctp_primitive_SEND return err only when asoc state is unavailable.
In this case, chunks are not enqueued, they have no chance to be freed if
we don't take care of them later.
This Patch is actually to revert commit 1cd4d5c4326a ("sctp: remove the
unused sctp_datamsg_free()"), commit 69b5777f2e57 ("sctp: hold the chunks
only after the chunk is enqueued in outq") and commit 8b570dc9f7b6 ("sctp:
only drop the reference on the datamsg after sending a msg"), to use
sctp_datamsg_free to free the chunks of current msg.
Fixes: 8b570dc9f7b6 ("sctp: only drop the reference on the datamsg after sending a msg")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Once a chunk is enqueued successfully, sctp queues can take care of it.
Even if it is failed to transmit (like because of nomem), it should be
put into retransmit queue.
If sctp report this error to users, it confuses them, they may resend
that msg, but actually in kernel sctp stack is in charge of retransmit
it already.
Besides, this error probably is not from the failure of transmitting
current msg, but transmitting or retransmitting another msg's chunks,
as sctp_outq_flush just tries to send out all transports' chunks.
This patch is to make sctp_cmd_send_msg return avoid, and not return the
transmit err back to sctp_sendmsg
Fixes: 8b570dc9f7b6 ("sctp: only drop the reference on the datamsg after sending a msg")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Data Chunks are only sent by sctp_primitive_SEND, in which sctp checks
the asoc's state through statetable before calling sctp_outq_tail. So
there's no need to check the asoc's state again in sctp_outq_tail.
Besides, sctp_do_sm is protected by lock_sock, even if sending msg is
interrupted by timer events, the event's processes still need to acquire
lock_sock first. It means no others CMDs can be enqueue into side effect
list before CMD_SEND_MSG to change asoc->state, so it's safe to remove it.
This patch is to remove redundant asoc->state check from sctp_outq_tail.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 4f0087812648 ("sctp: apply rhashtable api to send/recv
path"), sctp uses transport rhashtable with .obj_cmpfn sctp_hash_cmp,
in which it compares the members of the transport with the rhashtable
args to check if it's the right transport.
But sctp uses the transport without holding it in sctp_hash_cmp, it can
cause a use-after-free panic. As after it gets transport from hashtable,
another CPU may close the sk and free the asoc. In sctp_association_free,
it frees all the transports, meanwhile, the assoc's refcnt may be reduced
to 0, assoc can be destroyed by sctp_association_destroy.
So after that, transport->assoc is actually an unavailable memory address
in sctp_hash_cmp. Although sctp_hash_cmp is under rcu_read_lock, it still
can not avoid this, as assoc is not freed by RCU.
This patch is to hold the transport before checking it's members with
sctp_transport_hold, in which it checks the refcnt first, holds it if
it's not 0.
Fixes: 4f0087812648 ("sctp: apply rhashtable api to send/recv path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts:
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/qlogic/qed/qed_dcbx.c
drivers/net/phy/Kconfig
All conflicts were cases of overlapping commits.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Using the macro makes the code more readable by helping abstract away some
of the Kconfig built-in and module enable details.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously, without GSO, it was easy to identify it: if the chunk didn't
fit and there was no data chunk in the packet yet, we could fragment at
IP level. So if there was an auth chunk and we were bundling a big data
chunk, it would fragment regardless of the size of the auth chunk. This
also works for the context of PMTU reductions.
But with GSO, we cannot distinguish such PMTU events anymore, as the
packet is allowed to exceed PMTU.
So we need another check: to ensure that the chunk that we are adding,
actually fits the current PMTU. If it doesn't, trigger a flush and let
it be fragmented at IP level in the next round.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds the capability for a process that has CAP_NET_ADMIN on
a socket to see the socket mark in socket dumps.
Commit a52e95abf772 ("net: diag: allow socket bytecode filters to
match socket marks") recently gave privileged processes the
ability to filter socket dumps based on mark. This patch is
complementary: it ensures that the mark is also passed to
userspace in the socket's netlink attributes. It is useful for
tools like ss which display information about sockets.
Tested: https://android-review.googlesource.com/270210
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function sctp_diag_dump_one() currently performs a memcpy()
of 64 bytes from a 16 byte field into another 16 byte field. Fix
by using correct size, use sizeof to obtain correct size instead
of using a hard-coded constant.
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Because otherwise when crc computation is still needed it's way more
expensive than on a linear buffer to the point that it affects
performance.
It's so expensive that netperf test gives a perf output as below:
Overhead Command Shared Object Symbol
18,62% netserver [kernel.vmlinux] [k] crc32_generic_shift
2,57% netserver [kernel.vmlinux] [k] __pskb_pull_tail
1,94% netserver [kernel.vmlinux] [k] fib_table_lookup
1,90% netserver [kernel.vmlinux] [k] copy_user_enhanced_fast_string
1,66% swapper [kernel.vmlinux] [k] intel_idle
1,63% netserver [kernel.vmlinux] [k] _raw_spin_lock
1,59% netserver [sctp] [k] sctp_packet_transmit
1,55% netserver [kernel.vmlinux] [k] memcpy_erms
1,42% netserver [sctp] [k] sctp_rcv
# netperf -H 192.168.10.1 -l 10 -t SCTP_STREAM -cC -- -m 12000
SCTP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.10.1 () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
212992 212992 12000 10.00 3016.42 2.88 3.78 1.874 2.462
After patch:
Overhead Command Shared Object Symbol
2,75% netserver [kernel.vmlinux] [k] memcpy_erms
2,63% netserver [kernel.vmlinux] [k] copy_user_enhanced_fast_string
2,39% netserver [kernel.vmlinux] [k] fib_table_lookup
2,04% netserver [kernel.vmlinux] [k] __pskb_pull_tail
1,91% netserver [kernel.vmlinux] [k] _raw_spin_lock
1,91% netserver [sctp] [k] sctp_packet_transmit
1,72% netserver [mlx4_en] [k] mlx4_en_process_rx_cq
1,68% netserver [sctp] [k] sctp_rcv
# netperf -H 192.168.10.1 -l 10 -t SCTP_STREAM -cC -- -m 12000
SCTP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.10.1 () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
212992 212992 12000 10.00 3681.77 3.83 3.46 2.045 1.849
Fixes: 3acb50c18d8d ("sctp: delay as much as possible skb_linearize")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_transport_seq_start() does not currently clear iter->start_fail on
success, but relies on it being zero when it is allocated (by
seq_open_net()).
This can be a problem in the following sequence:
open() // allocates iter (and implicitly sets iter->start_fail = 0)
read()
- iter->start() // fails and sets iter->start_fail = 1
- iter->stop() // doesn't call sctp_transport_walk_stop() (correct)
read() again
- iter->start() // succeeds, but doesn't change iter->start_fail
- iter->stop() // doesn't call sctp_transport_walk_stop() (wrong)
We should initialize sctp_ht_iter::start_fail to zero if ->start()
succeeds, otherwise it's possible that we leave an old value of 1 there,
which will cause ->stop() to not call sctp_transport_walk_stop(), which
causes all sorts of problems like not calling rcu_read_unlock() (and
preempt_enable()), eventually leading to more warnings like this:
BUG: sleeping function called from invalid context at mm/slab.h:388
in_atomic(): 0, irqs_disabled(): 0, pid: 16551, name: trinity-c2
Preemption disabled at:[<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150
[<ffffffff81149abb>] preempt_count_add+0x1fb/0x280
[<ffffffff83295892>] _raw_spin_lock+0x12/0x40
[<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150
[<ffffffff82ec665f>] sctp_transport_walk_start+0x2f/0x60
[<ffffffff82edda1d>] sctp_transport_seq_start+0x4d/0x150
[<ffffffff81439e50>] traverse+0x170/0x850
[<ffffffff8143aeec>] seq_read+0x7cc/0x1180
[<ffffffff814f996c>] proc_reg_read+0xbc/0x180
[<ffffffff813d0384>] do_loop_readv_writev+0x134/0x210
[<ffffffff813d2a95>] do_readv_writev+0x565/0x660
[<ffffffff813d6857>] vfs_readv+0x67/0xa0
[<ffffffff813d6c16>] do_preadv+0x126/0x170
[<ffffffff813d710c>] SyS_preadv+0xc/0x10
[<ffffffff8100334c>] do_syscall_64+0x19c/0x410
[<ffffffff83296225>] return_from_SYSCALL_64+0x0/0x6a
[<ffffffffffffffff>] 0xffffffffffffffff
Notice that this is a subtly different stacktrace from the one in commit
5fc382d875 ("net/sctp: terminate rhashtable walk correctly").
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 52253db924d1 ("sctp: also point GSO head_skb to the sk when
it's available") used event->chunk->head_skb to get the head_skb in
sctp_ulpevent_set_owner().
But at that moment, the event->chunk was NULL, as it cloned the skb
in sctp_ulpevent_make_rcvmsg(). Therefore, that patch didn't really
work.
This patch is to move the event->chunk initialization before calling
sctp_ulpevent_receive_data() so that it uses event->chunk when it's
valid.
Fixes: 52253db924d1 ("sctp: also point GSO head_skb to the sk when it's available")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since 'ss' always adds TCPF_CLOSE to idiag_states flags, sctp_diag can't
rely upon TCPF_LISTEN flag solely being present when listening sockets
are requested.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The asoc's timer value is not kept in asoc->timeouts array but in it's
primary transport instead.
Furthermore, we must export the timer only if it is pending, otherwise
the value will underrun when stored in an unsigned variable and
user space will only see a very large timeout value.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
