summaryrefslogtreecommitdiffstats
path: root/net/sctp
AgeCommit message (Collapse)AuthorFilesLines
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-10/+18
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06sctp: free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLYXin Long1-10/+18
This patch is to fix a memleak caused by no place to free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq with an allocated chunk in cmd->obj.chunk. So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on the cmd seq when any cmd returns error. While at it, also remove 'nomem' label. Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-16/+16
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30sctp: add enabled check for path tracepoint loop.Kevin Kou1-2/+3
sctp_outq_sack is the main function handles SACK, it is called very frequently. As the commit "move trace_sctp_probe_path into sctp_outq_sack" added below code to this function, sctp tracepoint is disabled most of time, but the loop of transport list will be always called even though the tracepoint is disabled, this is unnecessary. + /* SCTP path tracepoint for congestion control debugging. */ + list_for_each_entry(transport, transport_list, transports) { + trace_sctp_probe_path(transport, asoc); + } This patch is to add tracepoint enabled check at outside of the loop of transport list, and avoid traversing the loop when trace is disabled, it is a small optimization. Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27sctp: do trace_sctp_probe after SACK validation and checkKevin Kou1-9/+9
The function sctp_sf_eat_sack_6_2 now performs the Verification Tag validation, Chunk length validation, Bogu check, and also the detection of out-of-order SACK based on the RFC2960 Section 6.2 at the beginning, and finally performs the further processing of SACK. The trace_sctp_probe now triggered before the above necessary validation and check. this patch is to do the trace_sctp_probe after the chunk sanity tests, but keep doing trace if the SACK received is out of order, for the out-of-order SACK is valuable to congestion control debugging. v1->v2: - keep doing SCTP trace if the SACK is out of order as Marcelo's suggestion. v2->v3: - regenerate the patch as v2 generated on top of v1, and add 'net-next' tag to the new one as Marcelo's comments. Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26sctp: move trace_sctp_probe_path into sctp_outq_sackKevin Kou1-0/+6
The original patch bringed in the "SCTP ACK tracking trace event" feature was committed at Dec.20, 2017, it replaced jprobe usage with trace events, and bringed in two trace events, one is TRACE_EVENT(sctp_probe), another one is TRACE_EVENT(sctp_probe_path). The original patch intended to trigger the trace_sctp_probe_path in TRACE_EVENT(sctp_probe) as below code, +TRACE_EVENT(sctp_probe, + + TP_PROTO(const struct sctp_endpoint *ep, + const struct sctp_association *asoc, + struct sctp_chunk *chunk), + + TP_ARGS(ep, asoc, chunk), + + TP_STRUCT__entry( + __field(__u64, asoc) + __field(__u32, mark) + __field(__u16, bind_port) + __field(__u16, peer_port) + __field(__u32, pathmtu) + __field(__u32, rwnd) + __field(__u16, unack_data) + ), + + TP_fast_assign( + struct sk_buff *skb = chunk->skb; + + __entry->asoc = (unsigned long)asoc; + __entry->mark = skb->mark; + __entry->bind_port = ep->base.bind_addr.port; + __entry->peer_port = asoc->peer.port; + __entry->pathmtu = asoc->pathmtu; + __entry->rwnd = asoc->peer.rwnd; + __entry->unack_data = asoc->unack_data; + + if (trace_sctp_probe_path_enabled()) { + struct sctp_transport *sp; + + list_for_each_entry(sp, &asoc->peer.transport_addr_list, + transports) { + trace_sctp_probe_path(sp, asoc); + } + } + ), But I found it did not work when I did testing, and trace_sctp_probe_path had no output, I finally found that there is trace buffer lock operation(trace_event_buffer_reserve) in include/trace/trace_events.h: static notrace void \ trace_event_raw_event_##call(void *__data, proto) \ { \ struct trace_event_file *trace_file = __data; \ struct trace_event_data_offsets_##call __maybe_unused __data_offsets;\ struct trace_event_buffer fbuffer; \ struct trace_event_raw_##call *entry; \ int __data_size; \ \ if (trace_trigger_soft_disabled(trace_file)) \ return; \ \ __data_size = trace_event_get_offsets_##call(&__data_offsets, args); \ \ entry = trace_event_buffer_reserve(&fbuffer, trace_file, \ sizeof(*entry) + __data_size); \ \ if (!entry) \ return; \ \ tstruct \ \ { assign; } \ \ trace_event_buffer_commit(&fbuffer); \ } The reason caused no output of trace_sctp_probe_path is that trace_sctp_probe_path written in TP_fast_assign part of TRACE_EVENT(sctp_probe), and it will be placed( { assign; } ) after the trace_event_buffer_reserve() when compiler expands Macro, entry = trace_event_buffer_reserve(&fbuffer, trace_file, \ sizeof(*entry) + __data_size); \ \ if (!entry) \ return; \ \ tstruct \ \ { assign; } \ so trace_sctp_probe_path finally can not acquire trace_event_buffer and return no output, that is to say the nest of tracepoint entry function is not allowed. The function call flow is: trace_sctp_probe() -> trace_event_raw_event_sctp_probe() -> lock buffer -> trace_sctp_probe_path() -> trace_event_raw_event_sctp_probe_path() --nested -> buffer has been locked and return no output. This patch is to remove trace_sctp_probe_path from the TP_fast_assign part of TRACE_EVENT(sctp_probe) to avoid the nest of entry function, and trigger sctp_probe_path_trace in sctp_outq_sack. After this patch, you can enable both events individually, # cd /sys/kernel/debug/tracing # echo 1 > events/sctp/sctp_probe/enable # echo 1 > events/sctp/sctp_probe_path/enable Or, you can enable all the events under sctp. # echo 1 > events/sctp/enable Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24net: add bool confirm_neigh parameter for dst_ops.update_pmtuHangbin Liu1-1/+1
The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time. But for tunnel code, it will call pmtu before xmit, like: - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed. So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point. On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call. To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Suggested-by: David Miller <davem@davemloft.net> Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24sctp: fix err handling of stream initializationMarcelo Ricardo Leitner1-15/+15
The fix on 951c6db954a1 fixed the issued reported there but introduced another. When the allocation fails within sctp_stream_init() it is okay/necessary to free the genradix. But it is also called when adding new streams, from sctp_send_add_streams() and sctp_process_strreset_addstrm_in() and in those situations it cannot just free the genradix because by then it is a fully operational association. The fix here then is to only free the genradix in sctp_stream_init() and on those other call sites move on with what it already had and let the subsequent error handling to handle it. Tested with the reproducers from this report and the previous one, with lksctp-tools and sctp-tests. Reported-by: syzbot+9a1bc632e78a1a98488b@syzkaller.appspotmail.com Fixes: 951c6db954a1 ("sctp: fix memleak on err handling of stream initialization") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-2/+11
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17sctp: fix memleak on err handling of stream initializationMarcelo Ricardo Leitner1-2/+6
syzbot reported a memory leak when an allocation fails within genradix_prealloc() for output streams. That's because genradix_prealloc() leaves initialized members initialized when the issue happens and SCTP stack will abort the current initialization but without cleaning up such members. The fix here is to always call genradix_free() when genradix_prealloc() fails, for output and also input streams, as it suffers from the same issue. Reported-by: syzbot+772d9e36c490b18d51d1@syzkaller.appspotmail.com Fixes: 2075e50caf5e ("sctp: convert to genradix") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09sctp: get netns from asoc and ep baseXin Long14-62/+49
Commit 312434617cb1 ("sctp: cache netns in sctp_ep_common") set netns in asoc and ep base since they're created, and it will never change. It's a better way to get netns from asoc and ep base, comparing to calling sock_net(). This patch is to replace them. v1->v2: - no change. Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09sctp: fully initialize v4 addr in some functionsXin Long1-0/+5
Syzbot found a crash: BUG: KMSAN: uninit-value in crc32_body lib/crc32.c:112 [inline] BUG: KMSAN: uninit-value in crc32_le_generic lib/crc32.c:179 [inline] BUG: KMSAN: uninit-value in __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 Call Trace: crc32_body lib/crc32.c:112 [inline] crc32_le_generic lib/crc32.c:179 [inline] __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202 chksum_update+0xb2/0x110 crypto/crc32c_generic.c:90 crypto_shash_update+0x4c5/0x530 crypto/shash.c:107 crc32c+0x150/0x220 lib/libcrc32c.c:47 sctp_csum_update+0x89/0xa0 include/net/sctp/checksum.h:36 __skb_checksum+0x1297/0x12a0 net/core/skbuff.c:2640 sctp_compute_cksum include/net/sctp/checksum.h:59 [inline] sctp_packet_pack net/sctp/output.c:528 [inline] sctp_packet_transmit+0x40fb/0x4250 net/sctp/output.c:597 sctp_outq_flush_transports net/sctp/outqueue.c:1146 [inline] sctp_outq_flush+0x1823/0x5d80 net/sctp/outqueue.c:1194 sctp_outq_uncork+0xd0/0xf0 net/sctp/outqueue.c:757 sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1781 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1184 [inline] sctp_do_sm+0x8fe1/0x9720 net/sctp/sm_sideeffect.c:1155 sctp_primitive_REQUESTHEARTBEAT+0x175/0x1a0 net/sctp/primitive.c:185 sctp_apply_peer_addr_params+0x212/0x1d40 net/sctp/socket.c:2433 sctp_setsockopt_peer_addr_params net/sctp/socket.c:2686 [inline] sctp_setsockopt+0x189bb/0x19090 net/sctp/socket.c:4672 The issue was caused by transport->ipaddr set with uninit addr param, which was passed by: sctp_transport_init net/sctp/transport.c:47 [inline] sctp_transport_new+0x248/0xa00 net/sctp/transport.c:100 sctp_assoc_add_peer+0x5ba/0x2030 net/sctp/associola.c:611 sctp_process_param net/sctp/sm_make_chunk.c:2524 [inline] where 'addr' is set by sctp_v4_from_addr_param(), and it doesn't initialize the padding of addr->v4. Later when calling sctp_make_heartbeat(), hbinfo.daddr(=transport->ipaddr) will become the part of skb, and the issue occurs. This patch is to fix it by initializing the padding of addr->v4 in sctp_v4_from_addr_param(), as well as other functions that do the similar thing, and these functions shouldn't trust that the caller initializes the memory, as Marcelo suggested. Reported-by: syzbot+6dcbfea81cd3d4dd0b02@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: ipv6: add net argument to ip6_dst_lookup_flowSabrina Dubroca1-2/+2
This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow, as some modules currently pass a net argument without a socket to ip6_dst_lookup. This is equivalent to commit 343d60aada5a ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-26net: port < inet_prot_sock(net) --> inet_port_requires_bind_service(net, port)Maciej Żenczykowski1-2/+2
Note that the sysctl write accessor functions guarantee that: net->ipv4.sysctl_ip_prot_sock <= net->ipv4.ip_local_ports.range[0] invariant is maintained, and as such the max() in selinux hooks is actually spurious. ie. even though if (snum < max(inet_prot_sock(sock_net(sk)), low) || snum > high) { per logic is the same as if ((snum < inet_prot_sock(sock_net(sk)) && snum < low) || snum > high) { it is actually functionally equivalent to: if (snum < low || snum > high) { which is equivalent to: if (snum < inet_prot_sock(sock_net(sk)) || snum < low || snum > high) { even though the first clause is spurious. But we want to hold on to it in case we ever want to change what what inet_port_requires_bind_service() means (for example by changing it from a, by default, [0..1024) range to some sort of set). Test: builds, git 'grep inet_prot_sock' finds no other references Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-26net-sctp: replace some sock_net(sk) with just 'net'Maciej Żenczykowski1-6/+6
It already existed in part of the function, but move it to a higher level and use it consistently throughout. Safe since sk is never written to. Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller4-3/+7
Merge in networking bug fixes for merge window. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-23sctp: cache netns in sctp_ep_commonXin Long3-2/+4
This patch is to fix a data-race reported by syzbot: BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1: sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091 sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465 sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916 inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734 __sys_accept4+0x224/0x430 net/socket.c:1754 __do_sys_accept net/socket.c:1795 [inline] __se_sys_accept net/socket.c:1792 [inline] __x64_sys_accept+0x4e/0x60 net/socket.c:1792 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0: sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894 rht_key_get_hash include/linux/rhashtable.h:133 [inline] rht_key_hashfn include/linux/rhashtable.h:159 [inline] rht_head_hashfn include/linux/rhashtable.h:174 [inline] head_hashfn lib/rhashtable.c:41 [inline] rhashtable_rehash_one lib/rhashtable.c:245 [inline] rhashtable_rehash_chain lib/rhashtable.c:276 [inline] rhashtable_rehash_table lib/rhashtable.c:316 [inline] rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate is changing its value. However, what rhashtable wants is netns from asoc base.sk, and for an asoc, its netns won't change once set. So we can simply fix it by caching netns since created. Fixes: d6c0256a60e6 ("sctp: add the rhashtable apis for sctp global transport hashtable") Reported-by: syzbot+e3b35fe7918ff0ee474e@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23sctp: Fix memory leak in sctp_sf_do_5_2_4_dupcookNavid Emamdoost1-1/+3
In the implementation of sctp_sf_do_5_2_4_dupcook() the allocated new_asoc is leaked if security_sctp_assoc_request() fails. Release it via sctp_association_free(). Fixes: 2277c7cd75e3 ("sctp: Add LSM hooks") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-08sctp: add SCTP_PEER_ADDR_THLDS_V2 sockoptXin Long1-14/+40
Section 7.2 of rfc7829: "Peer Address Thresholds (SCTP_PEER_ADDR_THLDS) Socket Option" extends 'struct sctp_paddrthlds' with 'spt_pathcpthld' added to allow a user to change ps_retrans per sock/asoc/transport, as other 2 paddrthlds: pf_retrans, pathmaxrxt. Note: to not break the user's program, here to support pf_retrans dump and setting by adding a new sockopt SCTP_PEER_ADDR_THLDS_V2, and a new structure sctp_paddrthlds_v2 instead of extending sctp_paddrthlds. Also, when setting ps_retrans, the value is not allowed to be greater than pf_retrans. v1->v2: - use SCTP_PEER_ADDR_THLDS_V2 to set/get pf_retrans instead, as Marcelo and David Laight suggested. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08sctp: add support for Primary Path SwitchoverXin Long5-1/+23
This is a new feature defined in section 5 of rfc7829: "Primary Path Switchover". By introducing a new tunable parameter: Primary.Switchover.Max.Retrans (PSMR) The primary path will be changed to another active path when the path error counter on the old primary path exceeds PSMR, so that "the SCTP sender is allowed to continue data transmission on a new working path even when the old primary destination address becomes active again". This patch is to add this tunable parameter, 'ps_retrans' per netns, sock, asoc and transport. It also allows a user to change ps_retrans per netns by sysctl, and ps_retrans per sock/asoc/transport will be initialized with it. The check will be done in sctp_do_8_2_transport_strike() when this feature is enabled. Note this feature is disabled by initializing 'ps_retrans' per netns as 0xffff by default, and its value can't be less than 'pf_retrans' when changing by sysctl. v3->v4: - add define SCTP_PS_RETRANS_MAX 0xffff, and use it on extra2 of sysctl 'ps_retrans'. - add a new entry for ps_retrans on ip-sysctl.txt. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08sctp: add SCTP_EXPOSE_POTENTIALLY_FAILED_STATE sockoptXin Long1-0/+79
This is a sockopt defined in section 7.3 of rfc7829: "Exposing the Potentially Failed Path State", by which users can change pf_expose per sock and asoc. The new sockopt SCTP_EXPOSE_POTENTIALLY_FAILED_STATE is also known as SCTP_EXPOSE_PF_STATE for short. v2->v3: - return -EINVAL if params.assoc_value > SCTP_PF_EXPOSE_MAX. - define SCTP_EXPOSE_PF_STATE SCTP_EXPOSE_POTENTIALLY_FAILED_STATE. v3->v4: - improve changelog. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08sctp: add SCTP_ADDR_POTENTIALLY_FAILED notificationXin Long1-18/+14
SCTP Quick failover draft section 5.1, point 5 has been removed from rfc7829. Instead, "the sender SHOULD (i) notify the Upper Layer Protocol (ULP) about this state transition", as said in section 3.2, point 8. So this patch is to add SCTP_ADDR_POTENTIALLY_FAILED, defined in section 7.1, "which is reported if the affected address becomes PF". Also remove transport cwnd's update when moving from PF back to ACTIVE , which is no longer in rfc7829 either. Note that ulp_notify will be set to false if asoc->expose is not 'enabled', according to last patch. v2->v3: - define SCTP_ADDR_PF SCTP_ADDR_POTENTIALLY_FAILED. v3->v4: - initialize spc_state with SCTP_ADDR_AVAILABLE, as Marcelo suggested. - check asoc->pf_expose in sctp_assoc_control_transport(), as Marcelo suggested. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08sctp: add pf_expose per netns and sock and asocXin Long4-2/+25
As said in rfc7829, section 3, point 12: The SCTP stack SHOULD expose the PF state of its destination addresses to the ULP as well as provide the means to notify the ULP of state transitions of its destination addresses from active to PF, and vice versa. However, it is recommended that an SCTP stack implementing SCTP-PF also allows for the ULP to be kept ignorant of the PF state of its destinations and the associated state transitions, thus allowing for retention of the simpler state transition model of [RFC4960] in the ULP. Not only does it allow to expose the PF state to ULP, but also allow to ignore sctp-pf to ULP. So this patch is to add pf_expose per netns, sock and asoc. And in sctp_assoc_control_transport(), ulp_notify will be set to false if asoc->expose is not 'enabled' in next patch. It also allows a user to change pf_expose per netns by sysctl, and pf_expose per sock and asoc will be initialized with it. Note that pf_expose also works for SCTP_GET_PEER_ADDR_INFO sockopt, to not allow a user to query the state of a sctp-pf peer address when pf_expose is 'disabled', as said in section 7.3. v1->v2: - Fix a build warning noticed by Nathan Chancellor. v2->v3: - set pf_expose to UNUSED by default to keep compatible with old applications. v3->v4: - add a new entry for pf_expose on ip-sysctl.txt, as Marcelo suggested. - change this patch to 1/5, and move sctp_assoc_control_transport change into 2/5, as Marcelo suggested. - use SCTP_PF_EXPOSE_UNSET instead of SCTP_PF_EXPOSE_UNUSED, and set SCTP_PF_EXPOSE_UNSET to 0 in enum, as Marcelo suggested. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net: annotate lockless accesses to sk->sk_max_ack_backlogEric Dumazet2-3/+3
sk->sk_max_ack_backlog can be read without any lock being held at least in TCP/DCCP cases. We need to use READ_ONCE()/WRITE_ONCE() to avoid load/store tearing and/or potential KCSAN warnings. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net: annotate lockless accesses to sk->sk_ack_backlogEric Dumazet1-1/+1
sk->sk_ack_backlog can be read without any lock being held. We need to use READ_ONCE()/WRITE_ONCE() to avoid load/store tearing and/or potential KCSAN warnings. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net: use helpers to change sk_ack_backlogEric Dumazet2-3/+3
Writers are holding a lock, but many readers do not. Following patch will add appropriate barriers in sk_acceptq_removed() and sk_acceptq_added(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-4/+4
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01inet: stop leaking jiffies on the wireEric Dumazet1-1/+1
Historically linux tried to stick to RFC 791, 1122, 2003 for IPv4 ID field generation. RFC 6864 made clear that no matter how hard we try, we can not ensure unicity of IP ID within maximum lifetime for all datagrams with a given source address/destination address/protocol tuple. Linux uses a per socket inet generator (inet_id), initialized at connection startup with a XOR of 'jiffies' and other fields that appear clear on the wire. Thiemo Nagel pointed that this strategy is a privacy concern as this provides 16 bits of entropy to fingerprint devices. Let's switch to a random starting point, this is just as good as far as RFC 6864 is concerned and does not leak anything critical. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Thiemo Nagel <tnagel@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: use skb_queue_empty_lockless() in busy poll contextsEric Dumazet1-1/+1
Busy polling usually runs without locks. Let's use skb_queue_empty_lockless() instead of skb_queue_empty() Also uses READ_ONCE() in __skb_try_recv_datagram() to address a similar potential problem. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: use skb_queue_empty_lockless() in poll() handlersEric Dumazet1-2/+2
Many poll() handlers are lockless. Using skb_queue_empty_lockless() instead of skb_queue_empty() is more appropriate. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller4-14/+20
Several cases of overlapping changes which were for the most part trivially resolvable. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds3-8/+14
Pull networking fixes from David Miller: "I was battling a cold after some recent trips, so quite a bit piled up meanwhile, sorry about that. Highlights: 1) Fix fd leak in various bpf selftests, from Brian Vazquez. 2) Fix crash in xsk when device doesn't support some methods, from Magnus Karlsson. 3) Fix various leaks and use-after-free in rxrpc, from David Howells. 4) Fix several SKB leaks due to confusion of who owns an SKB and who should release it in the llc code. From Eric Biggers. 5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet. 6) Jumbo packets don't work after resume on r8169, as the BIOS resets the chip into non-jumbo mode during suspend. From Heiner Kallweit. 7) Corrupt L2 header during MPLS push, from Davide Caratti. 8) Prevent possible infinite loop in tc_ctl_action, from Eric Dumazet. 9) Get register bits right in bcmgenet driver, based upon chip version. From Florian Fainelli. 10) Fix mutex problems in microchip DSA driver, from Marek Vasut. 11) Cure race between route lookup and invalidation in ipv4, from Wei Wang. 12) Fix performance regression due to false sharing in 'net' structure, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits) net: reorder 'struct net' fields to avoid false sharing net: dsa: fix switch tree list net: ethernet: dwmac-sun8i: show message only when switching to promisc net: aquantia: add an error handling in aq_nic_set_multicast_list net: netem: correct the parent's backlog when corrupted packet was dropped net: netem: fix error path for corrupted GSO frames macb: propagate errors when getting optional clocks xen/netback: fix error path of xenvif_connect_data() net: hns3: fix mis-counting IRQ vector numbers issue net: usb: lan78xx: Connect PHY before registering MAC vsock/virtio: discard packets if credit is not respected vsock/virtio: send a credit update when buffer size is changed mlxsw: spectrum_trap: Push Ethernet header before reporting trap net: ensure correct skb->tstamp in various fragmenters net: bcmgenet: reset 40nm EPHY on energy detect net: bcmgenet: soft reset 40nm EPHYs before MAC init net: phy: bcm7xxx: define soft_reset for 40nm EPHY net: bcmgenet: don't set phydev->link from MAC net: Update address for MediaTek ethernet driver in MAINTAINERS ipv4: fix race condition between route lookup and invalidation ...
2019-10-15sctp: change sctp_prot .no_autobind with trueXin Long1-2/+2
syzbot reported a memory leak: BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64): backtrace: [...] slab_alloc mm/slab.c:3319 [inline] [...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483 [...] sctp_bucket_create net/sctp/socket.c:8523 [inline] [...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270 [...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402 [...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497 [...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022 [...] sctp_setsockopt net/sctp/socket.c:4641 [inline] [...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611 [...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147 [...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084 [...] __do_sys_setsockopt net/socket.c:2100 [inline] It was caused by when sending msgs without binding a port, in the path: inet_sendmsg() -> inet_send_prepare() -> inet_autobind() -> .get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is not. Later when binding another port by sctp_setsockopt_bindx(), a new bucket will be created as bp->port is not set. sctp's autobind is supposed to call sctp_autobind() where it does all things including setting bp->port. Since sctp_autobind() is called in sctp_sendmsg() if the sk is not yet bound, it should have skipped the auto bind. THis patch is to avoid calling inet_autobind() in inet_send_prepare() by changing sctp_prot .no_autobind with true, also remove the unused .get_port. Reported-by: syzbot+d44f7bbebdea49dbc84a@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-11net: sctp: Rename fallthrough label to unhandledJoe Perches1-6/+6
fallthrough will become a pseudo reserved keyword so this only use of fallthrough is better renamed to allow it. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-09net: silence KCSAN warnings about sk->sk_backlog.len readsEric Dumazet1-1/+1
sk->sk_backlog.len can be written by BH handlers, and read from process contexts in a lockless way. Note the write side should also use WRITE_ONCE() or a variant. We need some agreement about the best way to do this. syzbot reported : BUG: KCSAN: data-race in tcp_add_backlog / tcp_grow_window.isra.0 write to 0xffff88812665f32c of 4 bytes by interrupt on cpu 1: sk_add_backlog include/net/sock.h:934 [inline] tcp_add_backlog+0x4a0/0xcc0 net/ipv4/tcp_ipv4.c:1737 tcp_v4_rcv+0x1aba/0x1bf0 net/ipv4/tcp_ipv4.c:1925 ip_protocol_deliver_rcu+0x51/0x470 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5004 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5118 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5208 napi_skb_finish net/core/dev.c:5671 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5704 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061 virtnet_receive drivers/net/virtio_net.c:1323 [inline] virtnet_poll+0x436/0x7d0 drivers/net/virtio_net.c:1428 napi_poll net/core/dev.c:6352 [inline] net_rx_action+0x3ae/0xa50 net/core/dev.c:6418 read to 0xffff88812665f32c of 4 bytes by task 7292 on cpu 0: tcp_space include/net/tcp.h:1373 [inline] tcp_grow_window.isra.0+0x6b/0x480 net/ipv4/tcp_input.c:413 tcp_event_data_recv+0x68f/0x990 net/ipv4/tcp_input.c:717 tcp_rcv_established+0xbfe/0xf50 net/ipv4/tcp_input.c:5618 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1542 sk_backlog_rcv include/net/sock.h:945 [inline] __release_sock+0x135/0x1e0 net/core/sock.c:2427 release_sock+0x61/0x160 net/core/sock.c:2943 tcp_recvmsg+0x63b/0x1a30 net/ipv4/tcp.c:2181 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1864 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 __vfs_read+0xb1/0xc0 fs/read_write.c:427 vfs_read fs/read_write.c:461 [inline] vfs_read+0x143/0x2c0 fs/read_write.c:446 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 7292 Comm: syz-fuzzer Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09net: silence KCSAN warnings around sk_add_backlog() callsEric Dumazet1-3/+3
sk_add_backlog() callers usually read sk->sk_rcvbuf without owning the socket lock. This means sk_rcvbuf value can be changed by other cpus, and KCSAN complains. Add READ_ONCE() annotations to document the lockless nature of these reads. Note that writes over sk_rcvbuf should also use WRITE_ONCE(), but this will be done in separate patches to ease stable backports (if we decide this is relevant for stable trees). BUG: KCSAN: data-race in tcp_add_backlog / tcp_recvmsg write to 0xffff88812ab369f8 of 8 bytes by interrupt on cpu 1: __sk_add_backlog include/net/sock.h:902 [inline] sk_add_backlog include/net/sock.h:933 [inline] tcp_add_backlog+0x45a/0xcc0 net/ipv4/tcp_ipv4.c:1737 tcp_v4_rcv+0x1aba/0x1bf0 net/ipv4/tcp_ipv4.c:1925 ip_protocol_deliver_rcu+0x51/0x470 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5004 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5118 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5208 napi_skb_finish net/core/dev.c:5671 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5704 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061 virtnet_receive drivers/net/virtio_net.c:1323 [inline] virtnet_poll+0x436/0x7d0 drivers/net/virtio_net.c:1428 napi_poll net/core/dev.c:6352 [inline] net_rx_action+0x3ae/0xa50 net/core/dev.c:6418 read to 0xffff88812ab369f8 of 8 bytes by task 7271 on cpu 0: tcp_recvmsg+0x470/0x1a30 net/ipv4/tcp.c:2047 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1864 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 __vfs_read+0xb1/0xc0 fs/read_write.c:427 vfs_read fs/read_write.c:461 [inline] vfs_read+0x143/0x2c0 fs/read_write.c:446 ksys_read+0xd5/0x1b0 fs/read_write.c:587 __do_sys_read fs/read_write.c:597 [inline] __se_sys_read fs/read_write.c:595 [inline] __x64_sys_read+0x4c/0x60 fs/read_write.c:595 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 7271 Comm: syz-fuzzer Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09sctp: add SCTP_SEND_FAILED_EVENT eventXin Long2-21/+58
This patch is to add a new event SCTP_SEND_FAILED_EVENT described in rfc6458#section-6.1.11. It's a update of SCTP_SEND_FAILED event: struct sctp_sndrcvinfo ssf_info is replaced with struct sctp_sndinfo ssfe_info in struct sctp_send_failed_event. SCTP_SEND_FAILED is being deprecated, but we don't remove it in this patch. Both are being processed in sctp_datamsg_destroy() when the corresp event flag is set. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09sctp: add SCTP_ADDR_MADE_PRIM eventXin Long1-0/+2
sctp_ulpevent_nofity_peer_addr_change() would be called in sctp_assoc_set_primary() to send SCTP_ADDR_MADE_PRIM event when this transport is set to the primary path of the asoc. This event is described in rfc6458#section-6.1.2: SCTP_ADDR_MADE_PRIM: This address has now been made the primary destination address. This notification is provided whenever an address is made primary. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09sctp: add SCTP_ADDR_REMOVED eventXin Long1-0/+1
sctp_ulpevent_nofity_peer_addr_change() is called in sctp_assoc_rm_peer() to send SCTP_ADDR_REMOVED event when this transport is removed from the asoc. This event is described in rfc6458#section-6.1.2: SCTP_ADDR_REMOVED: The address is no longer part of the association. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09sctp: add SCTP_ADDR_ADDED eventXin Long2-14/+23
A helper sctp_ulpevent_nofity_peer_addr_change() will be extracted to make peer_addr_change event and enqueue it, and the helper will be called in sctp_assoc_add_peer() to send SCTP_ADDR_ADDED event. This event is described in rfc6458#section-6.1.2: SCTP_ADDR_ADDED: The address is now part of the association. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09sctp: add chunks to sk_backlog when the newsk sk_socket is not setXin Long1-3/+9
This patch is to fix a NULL-ptr deref in selinux_socket_connect_helper: [...] kasan: GPF could be caused by NULL-ptr deref or user memory access [...] RIP: 0010:selinux_socket_connect_helper+0x94/0x460 [...] Call Trace: [...] selinux_sctp_bind_connect+0x16a/0x1d0 [...] security_sctp_bind_connect+0x58/0x90 [...] sctp_process_asconf+0xa52/0xfd0 [sctp] [...] sctp_sf_do_asconf+0x785/0x980 [sctp] [...] sctp_do_sm+0x175/0x5a0 [sctp] [...] sctp_assoc_bh_rcv+0x285/0x5b0 [sctp] [...] sctp_backlog_rcv+0x482/0x910 [sctp] [...] __release_sock+0x11e/0x310 [...] release_sock+0x4f/0x180 [...] sctp_accept+0x3f9/0x5a0 [sctp] [...] inet_accept+0xe7/0x720 It was caused by that the 'newsk' sk_socket was not set before going to security sctp hook when processing asconf chunk with SCTP_PARAM_ADD_IP or SCTP_PARAM_SET_PRIMARY: inet_accept()-> sctp_accept(): lock_sock(): lock listening 'sk' do_softirq(): sctp_rcv(): <-- [1] asconf chunk arrives and enqueued in 'sk' backlog sctp_sock_migrate(): set asoc's sk to 'newsk' release_sock(): sctp_backlog_rcv(): lock 'newsk' sctp_process_asconf() <-- [2] unlock 'newsk' sock_graft(): set sk_socket <-- [3] As it shows, at [1] the asconf chunk would be put into the listening 'sk' backlog, as accept() was holding its sock lock. Then at [2] asconf would get processed with 'newsk' as asoc's sk had been set to 'newsk'. However, 'newsk' sk_socket is not set until [3], while selinux_sctp_bind_connect() would deref it, then kernel crashed. Here to fix it by adding the chunk to sk_backlog until newsk sk_socket is set when .accept() is done. Note that sk->sk_socket can be NULL when the sock is closed, so SOCK_DEAD flag is also needed to check in sctp_newsk_ready(). Thanks to Ondrej for reviewing the code. Fixes: d452930fd3b9 ("selinux: Add SCTP support") Reported-by: Ying Xu <yinxu@redhat.com> Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-01netfilter: drop bridge nf reset from nf_resetFlorian Westphal1-1/+1
commit 174e23810cd31 ("sk_buff: drop all skb extensions on free and skb scrubbing") made napi recycle always drop skb extensions. The additional skb_ext_del() that is performed via nf_reset on napi skb recycle is not needed anymore. Most nf_reset() calls in the stack are there so queued skb won't block 'rmmod nf_conntrack' indefinitely. This removes the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). In a few selected places, add a call to skb_ext_reset to make sure that no active extensions remain. I am submitting this for "net", because we're still early in the release cycle. The patch applies to net-next too, but I think the rename causes needless divergence between those trees. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-09-27ipv6: add priority parameter to ip6_xmit()Eric Dumazet1-1/+1
Currently, ip6_xmit() sets skb->priority based on sk->sk_priority This is not desirable for TCP since TCP shares the same ctl socket for a given netns. We want to be able to send RST or ACK packets with a non zero skb->priority. This patch has no functional change. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-13/+15
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13sctp: destroy bucket if failed to bind addrMao Wenan1-4/+6
There is one memory leak bug report: BUG: memory leak unreferenced object 0xffff8881dc4c5ec0 (size 40): comm "syz-executor.0", pid 5673, jiffies 4298198457 (age 27.578s) hex dump (first 32 bytes): 02 00 00 00 81 88 ff ff 00 00 00 00 00 00 00 00 ................ f8 63 3d c1 81 88 ff ff 00 00 00 00 00 00 00 00 .c=............. backtrace: [<0000000072006339>] sctp_get_port_local+0x2a1/0xa00 [sctp] [<00000000c7b379ec>] sctp_do_bind+0x176/0x2c0 [sctp] [<000000005be274a2>] sctp_bind+0x5a/0x80 [sctp] [<00000000b66b4044>] inet6_bind+0x59/0xd0 [ipv6] [<00000000c68c7f42>] __sys_bind+0x120/0x1f0 net/socket.c:1647 [<000000004513635b>] __do_sys_bind net/socket.c:1658 [inline] [<000000004513635b>] __se_sys_bind net/socket.c:1656 [inline] [<000000004513635b>] __x64_sys_bind+0x3e/0x50 net/socket.c:1656 [<0000000061f2501e>] do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 [<0000000003d1e05e>] entry_SYSCALL_64_after_hwframe+0x49/0xbe This is because in sctp_do_bind, if sctp_get_port_local is to create hash bucket successfully, and sctp_add_bind_addr failed to bind address, e.g return -ENOMEM, so memory leak found, it needs to destroy allocated bucket. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Mao Wenan <maowenan@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13sctp: remove redundant assignment when call sctp_get_port_localMao Wenan1-2/+1
There are more parentheses in if clause when call sctp_get_port_local in sctp_do_bind, and redundant assignment to 'ret'. This patch is to do cleanup. Signed-off-by: Mao Wenan <maowenan@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13sctp: change return type of sctp_get_port_localMao Wenan1-4/+4
Currently sctp_get_port_local() returns a long which is either 0,1 or a pointer casted to long. It's neither of the callers use the return value since commit 62208f12451f ("net: sctp: simplify sctp_get_port"). Now two callers are sctp_get_port and sctp_do_bind, they actually assumend a casted to an int was the same as a pointer casted to a long, and they don't save the return value just check whether it is zero or non-zero, so it would better change return type from long to int for sctp_get_port_local. Signed-off-by: Mao Wenan <maowenan@huawei.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'Christophe JAILLET1-1/+1
The '.exit' functions from 'pernet_operations' structure should be marked as __net_exit, not __net_init. Fixes: 8e2d61e0aed2 ("sctp: fix race on protocol/netns initialization") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-10sctp: fix the missing put_user when dumping transport thresholdsXin Long1-1/+2
This issue causes SCTP_PEER_ADDR_THLDS sockopt not to be able to dump a transport thresholds info. Fix it by adding 'goto' put_user in sctp_getsockopt_paddr_thresholds. Fixes: 8add543e369d ("sctp: add SCTP_FUTURE_ASSOC for SCTP_PEER_ADDR_THLDS sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05sctp: use transport pf_retrans in sctp_do_8_2_transport_strikeXin Long1-1/+1
Transport should use its own pf_retrans to do the error_count check, instead of asoc's. Otherwise, it's meaningless to make pf_retrans per transport. Fixes: 5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 08:50:15 +0000