summaryrefslogtreecommitdiffstats
path: root/net/sched
AgeCommit message (Collapse)AuthorFilesLines
2020-04-03net_sched: fix a missing refcnt in tcindex_init()Cong Wang1-0/+1
The initial refcnt of struct tcindex_data should be 1, it is clear that I forgot to set it to 1 in tcindex_init(). This leads to a dec-after-zero warning. Reported-by: syzbot+8325e509a1bf83ec741d@syzkaller.appspotmail.com Fixes: 304e024216a8 ("net_sched: add a temporary refcnt for struct tcindex_data") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-01net_sched: add a temporary refcnt for struct tcindex_dataCong Wang1-6/+38
Although we intentionally use an ordered workqueue for all tc filter works, the ordering is not guaranteed by RCU work, given that tcf_queue_work() is esstenially a call_rcu(). This problem is demostrated by Thomas: CPU 0: tcf_queue_work() tcf_queue_work(&r->rwork, tcindex_destroy_rexts_work); -> Migration to CPU 1 CPU 1: tcf_queue_work(&p->rwork, tcindex_destroy_work); so the 2nd work could be queued before the 1st one, which leads to a free-after-free. Enforcing this order in RCU work is hard as it requires to change RCU code too. Fortunately we can workaround this problem in tcindex filter by taking a temporary refcnt, we only refcnt it right before we begin to destroy it. This simplifies the code a lot as a full refcnt requires much more changes in tcindex_set_parms(). Reported-by: syzbot+46f513c3033d592409d2@syzkaller.appspotmail.com Fixes: 3d210534cc93 ("net_sched: fix a race condition in tcindex_destroy()") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-0/+3
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-1/+1
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next: 1) Add support to specify a stateful expression in set definitions, this allows users to specify e.g. counters per set elements. 2) Flowtable software counter support. 3) Flowtable hardware offload counter support, from wenxu. 3) Parallelize flowtable hardware offload requests, from Paul Blakey. This includes a patch to add one work entry per offload command. 4) Several patches to rework nf_queue refcount handling, from Florian Westphal. 4) A few fixes for the flowtable tunnel offload: Fix crash if tunneling information is missing and set up indirect flow block as TC_SETUP_FT, patch from wenxu. 5) Stricter netlink attribute sanity check on filters, from Romain Bellan and Florent Fourcot. 5) Annotations to make sparse happy, from Jules Irenge. 6) Improve icmp errors in debugging information, from Haishuang Yan. 7) Fix warning in IPVS icmp error debugging, from Haishuang Yan. 8) Fix endianess issue in tcp extension header, from Sergey Marinkevich. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30bpf: Add socket assign supportJoe Stringer1-0/+3
Add support for TPROXY via a new bpf helper, bpf_sk_assign(). This helper requires the BPF program to discover the socket via a call to bpf_sk*_lookup_*(), then pass this socket to the new helper. The helper takes its own reference to the socket in addition to any existing reference that may or may not currently be obtained for the duration of BPF processing. For the destination socket to receive the traffic, the traffic must be routed towards that socket via local route. The simplest example route is below, but in practice you may want to route traffic more narrowly (eg by CIDR): $ ip route add local default dev lo This patch avoids trying to introduce an extra bit into the skb->sk, as that would require more invasive changes to all code interacting with the socket to ensure that the bit is handled correctly, such as all error-handling cases along the path from the helper in BPF through to the orphan path in the input. Instead, we opt to use the destructor variable to switch on the prefetch of the socket. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200329225342.16317-2-joe@wand.net.nz
2020-03-30net: sched: expose HW stats types per action used by driversJiri Pirko3-2/+11
It may be up to the driver (in case ANY HW stats is passed) to select which type of HW stats he is going to use. Add an infrastructure to expose this information to user. $ tc filter add dev enp3s0np1 ingress proto ip handle 1 pref 1 flower dst_ip 192.168.1.1 action drop $ tc -s filter show dev enp3s0np1 ingress filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 192.168.1.1 in_hw in_hw_count 2 action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 10 sec used 10 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats immediate <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: introduce nla_put_bitfield32() helper and use itJiri Pirko2-21/+10
Introduce a helper to pass value and selector to. The helper packs them into struct and puts them into netlink message. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27netfilter: flowtable: Fix incorrect tc_setup_type typewenxu1-1/+1
The indirect block setup should use TC_SETUP_FT as the type instead of TC_SETUP_BLOCK. Adjust existing users of the indirect flow block infrastructure. Fixes: b5140a36da78 ("netfilter: flowtable: add indr block setup support") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-26cls_flower: Add extack support for flags keyGuillaume Nault1-4/+7
Pass extack down to fl_set_key_flags() and set message on error. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26cls_flower: Add extack support for src and dst port range optionsGuillaume Nault1-8/+18
Pass extack down to fl_set_key_port_range() and set message on error. Both the min and max ports would qualify as invalid attributes here. Report the min one as invalid, as it's probably what makes the most sense from a user point of view. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26cls_flower: Add extack support for mpls optionsGuillaume Nault1-5/+18
Pass extack down to fl_set_key_mpls() and set message on error. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26sched: act_pedit: Implement stats_update callbackPetr Machata1-0/+11
Implement this callback in order to get the offloaded stats added to the kernel stats. Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26sched: act_skbedit: Implement stats_update callbackPetr Machata1-0/+11
Implement this callback in order to get the offloaded stats added to the kernel stats. Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller5-8/+19
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} buildPablo Neira Ayuso1-4/+2
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’: net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’ pkt->skb->tc_redirected = 1; ^~ net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’ pkt->skb->tc_from_ingress = 1; ^~ To avoid a direct dependency with tc actions from netfilter, wrap the redirect bits around CONFIG_NET_REDIRECT and move helpers to include/linux/skbuff.h. Turn on this toggle from the ifb driver, the only existing client of these bits in the tree. This patch adds skb_set_redirected() that sets on the redirected bit on the skbuff, it specifies if the packet was redirect from ingress and resets the timestamp (timestamp reset was originally missing in the netfilter bugfix). Fixes: bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress") Reported-by: noreply@ellerman.id.au Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24net: cbs: Fix software cbs to consider packet sending timeZh-yuan Ye1-1/+11
Currently the software CBS does not consider the packet sending time when depleting the credits. It caused the throughput to be Idleslope[kbps] * (Port transmit rate[kbps] / |Sendslope[kbps]|) where Idleslope * (Port transmit rate / (Idleslope + |Sendslope|)) = Idleslope is expected. In order to fix the issue above, this patch takes the time when the packet sending completes into account by moving the anchor time variable "last" ahead to the send completion time upon transmission and adding wait when the next dequeue request comes before the send completion time of the previous packet. changelog: V2->V3: - remove unnecessary whitespace cleanup - add the checks if port_rate is 0 before division V1->V2: - combine variable "send_completed" into "last" - add the comment for estimate of the packet sending Fixes: 585d763af09c ("net/sched: Introduce Credit Based Shaper (CBS) qdisc") Signed-off-by: Zh-yuan Ye <ye.zh-yuan@socionext.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23net: sched: rename more stats_typesJakub Kicinski2-25/+23
Commit 53eca1f3479f ("net: rename flow_action_hw_stats_types* -> flow_action_hw_stats*") renamed just the flow action types and helpers. For consistency rename variables, enums, struct members and UAPI too (note that this UAPI was not in any official release, yet). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: tc_skbedit: Make the skbedit priority offloadablePetr Machata1-0/+3
The skbedit action "priority" is used for adjusting SKB priority. Allow drivers to offload the action by introducing two new skbedit getters and a new flow action, and initializing appropriately in tc_setup_flow_action(). Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18net: sched: Fix hw_stats_type setting in pedit loopPetr Machata1-1/+1
In the commit referenced below, hw_stats_type of an entry is set for every entry that corresponds to a pedit action. However, the assignment is only done after the entry pointer is bumped, and therefore could overwrite memory outside of the entries array. The reason for this positioning may have been that the current entry's hw_stats_type is already set above, before the action-type dispatch. However, if there are no more actions, the assignment is wrong. And if there are, the next round of the for_each_action loop will make the assignment before the action-type dispatch anyway. Therefore fix this issue by simply reordering the two lines. Fixes: 74522e7baae2 ("net: sched: set the hw_stats_type in pedit loop") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18net/sched: act_ct: Fix leak of ct zone template on replacePaul Blakey1-1/+1
Currently, on replace, the previous action instance params is swapped with a newly allocated params. The old params is only freed (via kfree_rcu), without releasing the allocated ct zone template related to it. Call tcf_ct_params_free (via call_rcu) for the old params, so it will release it. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net_sched: sch_fq: enable use of hrtimer slackEric Dumazet1-4/+17
Add a new attribute to control the fq qdisc hrtimer slack. Default is set to 10 usec. When/if packets are throttled, fq set up an hrtimer that can lead to one interrupt per packet in the throttled queue. By using a timer slack, we allow better use of timer interrupts, by giving them a chance to call multiple timer callbacks at each hardware interrupt. Also, giving a slack allows FQ to dequeue batches of packets instead of a single one, thus increasing xmit_more efficiency. This has no negative effect on the rate a TCP flow can sustain, since each TCP flow maintains its own precise vtime (tp->tcp_wstamp_ns) v2: added strict netlink checking (as feedback from Jakub Kicinski) Tested: 1000 concurrent flows all using paced packets. 1,000,000 packets sent per second. Before the patch : $ vmstat 2 10 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 60726784 23628 3485992 0 0 138 1 977 535 0 12 87 0 0 0 0 0 60714700 23628 3485628 0 0 0 0 1568827 26462 0 22 78 0 0 1 0 0 60716012 23628 3485656 0 0 0 0 1570034 26216 0 22 78 0 0 0 0 0 60722420 23628 3485492 0 0 0 0 1567230 26424 0 22 78 0 0 0 0 0 60727484 23628 3485556 0 0 0 0 1568220 26200 0 22 78 0 0 2 0 0 60718900 23628 3485380 0 0 0 40 1564721 26630 0 22 78 0 0 2 0 0 60718096 23628 3485332 0 0 0 0 1562593 26432 0 22 78 0 0 0 0 0 60719608 23628 3485064 0 0 0 0 1563806 26238 0 22 78 0 0 1 0 0 60722876 23628 3485236 0 0 0 130 1565874 26566 0 22 78 0 0 1 0 0 60722752 23628 3484908 0 0 0 0 1567646 26247 0 22 78 0 0 After the patch, slack of 10 usec, we can see a reduction of interrupts per second, and a small decrease of reported cpu usage. $ vmstat 2 10 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 60722564 23628 3484728 0 0 133 1 696 545 0 13 87 0 0 1 0 0 60722568 23628 3484824 0 0 0 0 977278 25469 0 20 80 0 0 0 0 0 60716396 23628 3484764 0 0 0 0 979997 25326 0 20 80 0 0 0 0 0 60713844 23628 3484960 0 0 0 0 981394 25249 0 20 80 0 0 2 0 0 60720468 23628 3484916 0 0 0 0 982860 25062 0 20 80 0 0 1 0 0 60721236 23628 3484856 0 0 0 0 982867 25100 0 20 80 0 0 1 0 0 60722400 23628 3484456 0 0 0 8 982698 25303 0 20 80 0 0 0 0 0 60715396 23628 3484428 0 0 0 0 981777 25176 0 20 80 0 0 0 0 0 60716520 23628 3486544 0 0 0 36 978965 27857 0 21 79 0 0 0 0 0 60719592 23628 3486516 0 0 0 22 977318 25106 0 20 80 0 0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net_sched: do not reprogram a timer about to expireEric Dumazet1-2/+7
qdisc_watchdog_schedule_range_ns() can use the newly added slack and avoid rearming the hrtimer a bit earlier than the current value. This patch has no effect if delta_ns parameter is zero. Note that this means the max slack is potentially doubled. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net_sched: add qdisc_watchdog_schedule_range_ns()Eric Dumazet1-5/+7
Some packet schedulers might want to add a slack when programming hrtimers. This can reduce number of interrupts and increase batch sizes and thus give good xmit_more savings. This commit adds qdisc_watchdog_schedule_range_ns() helper, with an extra delta_ns parameter. Legacy qdisc_watchdog_schedule_n() becomes an inline passing a zero slack. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: rename flow_action_hw_stats_types* -> flow_action_hw_stats*Jakub Kicinski1-3/+3
flow_action_hw_stats_types_check() helper takes one of the FLOW_ACTION_HW_STATS_*_BIT values as input. If we align the arguments to the opening bracket of the helper there is no way to call this helper and stay under 80 characters. Remove the "types" part from the new flow_action helpers and enum values. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16net: sched: set the hw_stats_type in pedit loopJiri Pirko1-0/+1
For a single pedit action, multiple offload entries may be used. Set the hw_stats_type to all of them. Fixes: 44f865801741 ("sched: act: allow user to specify type of HW stats for a filter") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16net_sched: cls_route: remove the right filter from hashtableCong Wang1-2/+2
route4_change() allocates a new filter and copies values from the old one. After the new filter is inserted into the hash table, the old filter should be removed and freed, as the final step of the update. However, the current code mistakenly removes the new one. This looks apparently wrong to me, and it causes double "free" and use-after-free too, as reported by syzbot. Reported-and-tested-by: syzbot+f9b32aaacd60305d9687@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+2f8c233f131943d6056d@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+9c2df9fd5e9445b74e01@syzkaller.appspotmail.com Fixes: 1109c00547fc ("net: sched: RCU cls_route") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14net: sched: RED: Introduce an ECN nodrop modePetr Machata1-6/+25
When the RED Qdisc is currently configured to enable ECN, the RED algorithm is used to decide whether a certain SKB should be marked. If that SKB is not ECN-capable, it is early-dropped. It is also possible to keep all traffic in the queue, and just mark the ECN-capable subset of it, as appropriate under the RED algorithm. Some switches support this mode, and some installations make use of it. To that end, add a new RED flag, TC_RED_NODROP. When the Qdisc is configured with this flag, non-ECT traffic is enqueued instead of being early-dropped. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14net: sched: Allow extending set of supported RED flagsPetr Machata1-3/+40
The qdiscs RED, GRED, SFQ and CHOKE use different subsets of the same pool of global RED flags. These are passed in tc_red_qopt.flags. However none of these qdiscs validate the flag field, and just copy it over wholesale to internal structures, and later dump it back. (An exception is GRED, which does validate for VQs -- however not for the main setup.) A broken userspace can therefore configure a qdisc with arbitrary unsupported flags, and later expect to see the flags on qdisc dump. The current ABI therefore allows storage of several bits of custom data to qdisc instances of the types mentioned above. How many bits, depends on which flags are meaningful for the qdisc in question. E.g. SFQ recognizes flags ECN and HARDDROP, and the rest is not interpreted. If SFQ ever needs to support ADAPTATIVE, it needs another way of doing it, and at the same time it needs to retain the possibility to store 6 bits of uninterpreted data. Likewise RED, which adds a new flag later in this patchset. To that end, this patch adds a new function, red_get_flags(), to split the passed flags of RED-like qdiscs to flags and user bits, and red_validate_flags() to validate the resulting configuration. It further adds a new attribute, TCA_RED_FLAGS, to pass arbitrary flags. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14net_sched: keep alloc_hash updated after hash allocationCong Wang1-0/+1
In commit 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex") I moved cp->hash calculation before the first tcindex_alloc_perfect_hash(), but cp->alloc_hash is left untouched. This difference could lead to another out of bound access. cp->alloc_hash should always be the size allocated, we should update it after this tcindex_alloc_perfect_hash(). Reported-and-tested-by: syzbot+dcc34d54d68ef7d2d53d@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+c72da7b9ed57cde6fca2@syzkaller.appspotmail.com Fixes: 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14net_sched: hold rtnl lock in tcindex_partial_destroy_work()Cong Wang1-0/+2
syzbot reported a use-after-free in tcindex_dump(). This is due to the lack of RTNL in the deferred rcu work. We queue this work with RTNL in tcindex_change(), later, tcindex_dump() is called: fh = tp->ops->get(tp, t->tcm_handle); ... err = tp->ops->change(..., &fh, ...); tfilter_notify(..., fh, ...); but there is nothing to serialize the pending tcindex_partial_destroy_work() with tcindex_dump(). Fix this by simply holding RTNL in tcindex_partial_destroy_work(), so that it won't be called until RTNL is released after tc_new_tfilter() is completed. Reported-and-tested-by: syzbot+653090db2562495901dc@syzkaller.appspotmail.com Fixes: 3d210534cc93 ("net_sched: fix a race condition in tcindex_destroy()") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-3/+11
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net/sched: act_ct: Enable hardware offload of flow table entiresPaul Blakey2-0/+3
Pass the zone's flow table instance on the flow action to the drivers. Thus, allowing drivers to register FT add/del/stats callbacks. Finally, enable hardware offload on the flow table instance. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net/sched: act_ct: Support refreshing the flow table entriesPaul Blakey1-0/+1
If driver deleted an FT entry, a FT failed to offload, or registered to the flow table after flows were already added, we still get packets in software. For those packets, while restoring the ct state from the flow table entry, refresh it's hardware offload. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net/sched: act_ct: Support restoring conntrack info on skbsPaul Blakey1-0/+16
Provide an API to restore the ct state pointer. This may be used by drivers to restore the ct state if they miss in tc chain after they already did the hardware connection tracking action (ct_metadata action). For example, consider the following rule on chain 0 that is in_hw, however chain 1 is not_in_hw: $ tc filter add dev ... chain 0 ... \ flower ... action ct pipe action goto chain 1 Packets of a flow offloaded (via nf flow table offload) by the driver hit this rule in hardware, will be marked with the ct metadata action (mark, label, zone) that does the equivalent of the software ct action, and when the packet jumps to hardware chain 1, there would be a miss. CT was already processed in hardware. Therefore, the driver's miss handling should restore the ct state on the skb, using the provided API, and continue the packet processing in chain 1. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net/sched: act_ct: Instantiate flow table entry actionsPaul Blakey1-0/+207
NF flow table API associate 5-tuple rule with an action list by calling the flow table type action() CB to fill the rule's actions. In action CB of act_ct, populate the ct offload entry actions with a new ct_metadata action. Initialize the ct_metadata with the ct mark, label and zone information. If ct nat was performed, then also append the relevant packet mangle actions (e.g. ipv4/ipv6/tcp/udp header rewrites). Drivers that offload the ft entries may match on the 5-tuple and perform the action list. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12Merge branch 'ct-offload' of ↵David S. Miller3-18/+99
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
2020-03-12taprio: Fix sending packets without dequeueing themVinicius Costa Gomes1-3/+9
There was a bug that was causing packets to be sent to the driver without first calling dequeue() on the "child" qdisc. And the KASAN report below shows that sending a packet without calling dequeue() leads to bad results. The problem is that when checking the last qdisc "child" we do not set the returned skb to NULL, which can cause it to be sent to the driver, and so after the skb is sent, it may be freed, and in some situations a reference to it may still be in the child qdisc, because it was never dequeued. The crash log looks like this: [ 19.937538] ================================================================== [ 19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780 [ 19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0 [ 19.939612] [ 19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97 [ 19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4 [ 19.941523] Call Trace: [ 19.941774] <IRQ> [ 19.941985] dump_stack+0x97/0xe0 [ 19.942323] print_address_description.constprop.0+0x3b/0x60 [ 19.942884] ? taprio_dequeue_soft+0x620/0x780 [ 19.943325] ? taprio_dequeue_soft+0x620/0x780 [ 19.943767] __kasan_report.cold+0x1a/0x32 [ 19.944173] ? taprio_dequeue_soft+0x620/0x780 [ 19.944612] kasan_report+0xe/0x20 [ 19.944954] taprio_dequeue_soft+0x620/0x780 [ 19.945380] __qdisc_run+0x164/0x18d0 [ 19.945749] net_tx_action+0x2c4/0x730 [ 19.946124] __do_softirq+0x268/0x7bc [ 19.946491] irq_exit+0x17d/0x1b0 [ 19.946824] smp_apic_timer_interrupt+0xeb/0x380 [ 19.947280] apic_timer_interrupt+0xf/0x20 [ 19.947687] </IRQ> [ 19.947912] RIP: 0010:default_idle+0x2d/0x2d0 [ 19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3 [ 19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e [ 19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f [ 19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1 [ 19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001 [ 19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 19.954408] ? default_idle_call+0x2e/0x70 [ 19.954816] ? default_idle+0x1f/0x2d0 [ 19.955192] default_idle_call+0x5e/0x70 [ 19.955584] do_idle+0x3d4/0x500 [ 19.955909] ? arch_cpu_idle_exit+0x40/0x40 [ 19.956325] ? _raw_spin_unlock_irqrestore+0x23/0x30 [ 19.956829] ? trace_hardirqs_on+0x30/0x160 [ 19.957242] cpu_startup_entry+0x19/0x20 [ 19.957633] start_secondary+0x2a6/0x380 [ 19.958026] ? set_cpu_sibling_map+0x18b0/0x18b0 [ 19.958486] secondary_startup_64+0xa4/0xb0 [ 19.958921] [ 19.959078] Allocated by task 33: [ 19.959412] save_stack+0x1b/0x80 [ 19.959747] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 19.960222] kmem_cache_alloc+0xe4/0x230 [ 19.960617] __alloc_skb+0x91/0x510 [ 19.960967] ndisc_alloc_skb+0x133/0x330 [ 19.961358] ndisc_send_ns+0x134/0x810 [ 19.961735] addrconf_dad_work+0xad5/0xf80 [ 19.962144] process_one_work+0x78e/0x13a0 [ 19.962551] worker_thread+0x8f/0xfa0 [ 19.962919] kthread+0x2ba/0x3b0 [ 19.963242] ret_from_fork+0x3a/0x50 [ 19.963596] [ 19.963753] Freed by task 33: [ 19.964055] save_stack+0x1b/0x80 [ 19.964386] __kasan_slab_free+0x12f/0x180 [ 19.964830] kmem_cache_free+0x80/0x290 [ 19.965231] ip6_mc_input+0x38a/0x4d0 [ 19.965617] ipv6_rcv+0x1a4/0x1d0 [ 19.965948] __netif_receive_skb_one_core+0xf2/0x180 [ 19.966437] netif_receive_skb+0x8c/0x3c0 [ 19.966846] br_handle_frame_finish+0x779/0x1310 [ 19.967302] br_handle_frame+0x42a/0x830 [ 19.967694] __netif_receive_skb_core+0xf0e/0x2a90 [ 19.968167] __netif_receive_skb_one_core+0x96/0x180 [ 19.968658] process_backlog+0x198/0x650 [ 19.969047] net_rx_action+0x2fa/0xaa0 [ 19.969420] __do_softirq+0x268/0x7bc [ 19.969785] [ 19.969940] The buggy address belongs to the object at ffff888112862840 [ 19.969940] which belongs to the cache skbuff_head_cache of size 224 [ 19.971202] The buggy address is located 140 bytes inside of [ 19.971202] 224-byte region [ffff888112862840, ffff888112862920) [ 19.972344] The buggy address belongs to the page: [ 19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0 [ 19.973930] flags: 0x8000000000010200(slab|head) [ 19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0 [ 19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000 [ 19.975915] page dumped because: kasan: bad access detected [ 19.976461] page_owner tracks the page as allocated [ 19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO) [ 19.978332] prep_new_page+0x24b/0x330 [ 19.978707] get_page_from_freelist+0x2057/0x2c90 [ 19.979170] __alloc_pages_nodemask+0x218/0x590 [ 19.979619] new_slab+0x9d/0x300 [ 19.979948] ___slab_alloc.constprop.0+0x2f9/0x6f0 [ 19.980421] __slab_alloc.constprop.0+0x30/0x60 [ 19.980870] kmem_cache_alloc+0x201/0x230 [ 19.981269] __alloc_skb+0x91/0x510 [ 19.981620] alloc_skb_with_frags+0x78/0x4a0 [ 19.982043] sock_alloc_send_pskb+0x5eb/0x750 [ 19.982476] unix_stream_sendmsg+0x399/0x7f0 [ 19.982904] sock_sendmsg+0xe2/0x110 [ 19.983262] ____sys_sendmsg+0x4de/0x6d0 [ 19.983660] ___sys_sendmsg+0xe4/0x160 [ 19.984032] __sys_sendmsg+0xab/0x130 [ 19.984396] do_syscall_64+0xe7/0xae0 [ 19.984761] page last free stack trace: [ 19.985142] __free_pages_ok+0x432/0xbc0 [ 19.985533] qlist_free_all+0x56/0xc0 [ 19.985907] quarantine_reduce+0x149/0x170 [ 19.986315] __kasan_kmalloc.constprop.0+0x9e/0xd0 [ 19.986791] kmem_cache_alloc+0xe4/0x230 [ 19.987182] prepare_creds+0x24/0x440 [ 19.987548] do_faccessat+0x80/0x590 [ 19.987906] do_syscall_64+0xe7/0xae0 [ 19.988276] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 19.988775] [ 19.988930] Memory state around the buggy address: [ 19.989402] ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.990111] ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 19.991529] ^ [ 19.992081] ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 19.992796] ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12Revert "net: sched: make newly activated qdiscs visible"Julian Wiedmann1-21/+0
This reverts commit 4cda75275f9f89f9485b0ca4d6950c95258a9bce from net-next. Brown bag time. Michal noticed that this change doesn't work at all when netif_set_real_num_tx_queues() gets called prior to an initial dev_activate(), as for instance igb does. Doing so dies with: [ 40.579142] BUG: kernel NULL pointer dereference, address: 0000000000000400 [ 40.586922] #PF: supervisor read access in kernel mode [ 40.592668] #PF: error_code(0x0000) - not-present page [ 40.598405] PGD 0 P4D 0 [ 40.601234] Oops: 0000 [#1] PREEMPT SMP PTI [ 40.605909] CPU: 18 PID: 1681 Comm: wickedd Tainted: G E 5.6.0-rc3-ethnl.50-default #1 [ 40.616205] Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.R3.27.D685.1305151734 05/15/2013 [ 40.627377] RIP: 0010:qdisc_hash_add.part.22+0x2e/0x90 [ 40.633115] Code: 00 55 53 89 f5 48 89 fb e8 2f 9b fb ff 85 c0 74 44 48 8b 43 40 48 8b 08 69 43 38 47 86 c8 61 c1 e8 1c 48 83 e8 80 48 8d 14 c1 <48> 8b 04 c1 48 8d 4b 28 48 89 53 30 48 89 43 28 48 85 c0 48 89 0a [ 40.654080] RSP: 0018:ffffb879864934d8 EFLAGS: 00010203 [ 40.659914] RAX: 0000000000000080 RBX: ffffffffb8328d80 RCX: 0000000000000000 [ 40.667882] RDX: 0000000000000400 RSI: 0000000000000000 RDI: ffffffffb831faa0 [ 40.675849] RBP: 0000000000000000 R08: ffffa0752c8b9088 R09: ffffa0752c8b9208 [ 40.683816] R10: 0000000000000006 R11: 0000000000000000 R12: ffffa0752d734000 [ 40.691783] R13: 0000000000000008 R14: 0000000000000000 R15: ffffa07113c18000 [ 40.699750] FS: 00007f94548e5880(0000) GS:ffffa0752e980000(0000) knlGS:0000000000000000 [ 40.708782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.715189] CR2: 0000000000000400 CR3: 000000082b6ae006 CR4: 00000000001606e0 [ 40.723156] Call Trace: [ 40.725888] dev_qdisc_set_real_num_tx_queues+0x61/0x90 [ 40.731725] netif_set_real_num_tx_queues+0x94/0x1d0 [ 40.737286] __igb_open+0x19a/0x5d0 [igb] [ 40.741767] __dev_open+0xbb/0x150 [ 40.745567] __dev_change_flags+0x157/0x1a0 [ 40.750240] dev_change_flags+0x23/0x60 [...] Fixes: 4cda75275f9f ("net: sched: make newly activated qdiscs visible") Reported-by: Michal Kubecek <mkubecek@suse.cz> CC: Michal Kubecek <mkubecek@suse.cz> CC: Eric Dumazet <edumazet@google.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11net: sched: make newly activated qdiscs visibleJulian Wiedmann1-0/+21
In their .attach callback, mq[prio] only add the qdiscs of the currently active TX queues to the device's qdisc hash list. If a user later increases the number of active TX queues, their qdiscs are not visible via eg. 'tc qdisc show'. Add a hook to netif_set_real_num_tx_queues() that walks all active TX queues and adds those which are missing to the hash list. CC: Eric Dumazet <edumazet@google.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: sched: pie: change tc_pie_xstats->probLeslie Monis1-1/+1
Commit 105e808c1da2 ("pie: remove pie_vars->accu_prob_overflows") changes the scale of probability values in PIE from (2^64 - 1) to (2^56 - 1). This affects the precision of tc_pie_xstats->prob in user space. This patch ensures user space is unaffected. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_getEric Dumazet1-13/+11
Convert zones_lock spinlock to zones_mutex mutex, and struct (tcf_ct_flow_table)->ref to a refcount, so that control path can use regular GFP_KERNEL allocations from standard process context. This is more robust in case of memory pressure. The refcount is needed because tcf_ct_flow_table_put() can be called from RCU callback, thus in BH context. The issue was spotted by syzbot, as rhashtable_init() was called with a spinlock held, which is bad since GFP_KERNEL allocations can sleep. Note to developers : Please make sure your patches are tested with CONFIG_DEBUG_ATOMIC_SLEEP=y BUG: sleeping function called from invalid context at mm/slab.h:565 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9582, name: syz-executor610 2 locks held by syz-executor610/9582: #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x3f9/0xad0 net/core/rtnetlink.c:5437 #1: ffffffff8a3961b8 (zones_lock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffffffff8a3961b8 (zones_lock){+...}, at: tcf_ct_flow_table_get+0xa3/0x1700 net/sched/act_ct.c:67 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 0 PID: 9582 Comm: syz-executor610 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 ___might_sleep.cold+0x1f4/0x23d kernel/sched/core.c:6798 slab_pre_alloc_hook mm/slab.h:565 [inline] slab_alloc_node mm/slab.c:3227 [inline] kmem_cache_alloc_node_trace+0x272/0x790 mm/slab.c:3593 __do_kmalloc_node mm/slab.c:3615 [inline] __kmalloc_node+0x38/0x60 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x61/0xf0 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] bucket_table_alloc+0x8b/0x480 lib/rhashtable.c:175 rhashtable_init+0x3d2/0x750 lib/rhashtable.c:1054 nf_flow_table_init+0x16d/0x310 net/netfilter/nf_flow_table_core.c:498 tcf_ct_flow_table_get+0xe33/0x1700 net/sched/act_ct.c:82 tcf_ct_init+0xba4/0x18a6 net/sched/act_ct.c:1050 tcf_action_init_1+0x697/0xa20 net/sched/act_api.c:945 tcf_action_init+0x1e9/0x2f0 net/sched/act_api.c:1001 tcf_action_add+0xdb/0x370 net/sched/act_api.c:1411 tc_ctl_action+0x366/0x456 net/sched/act_api.c:1466 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5440 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2478 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6b9/0x7d0 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0xec/0x1b0 net/socket.c:2430 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd719af218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000005 R09: 00000000004002c8 R10: 0000000000000008 R11: 00000000000 Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Blakey <paulb@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08sched: act: allow user to specify type of HW stats for a filterJiri Pirko2-0/+43
Currently, user who is adding an action expects HW to report stats, however it does not have exact expectations about the stats types. That is aligned with TCA_ACT_HW_STATS_TYPE_ANY. Allow user to specify the type of HW stats for an action and require it. Pass the information down to flow_offload layer. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05net: sched: Make FIFO Qdisc offloadablePetr Machata1-6/+91
Invoke ndo_setup_tc() as appropriate to signal init / replacement, destroying and dumping of pFIFO / bFIFO Qdisc. A lot of the FIFO logic is used for pFIFO_head_drop as well, but that's a semantically very different Qdisc that isn't really in the same boat as pFIFO / bFIFO. Split some of the functions to keep the Qdisc intact. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04pie: remove pie_vars->accu_prob_overflowsLeslie Monis2-16/+6
The variable pie_vars->accu_prob is used as an accumulator for probability values. Since probabilty values are scaled using the MAX_PROB macro denoting (2^64 - 1), pie_vars->accu_prob is likely to overflow as it is of type u64. The variable pie_vars->accu_prob_overflows counts the number of times the variable pie_vars->accu_prob overflows. The MAX_PROB macro needs to be equal to at least (2^39 - 1) in order to do precise calculations without any underflow. Thus MAX_PROB can be reduced to (2^56 - 1) without affecting the precision in calculations drastically. Doing so will eliminate the need for the variable pie_vars->accu_prob_overflows as the variable pie_vars->accu_prob will never overflow. Removing the variable pie_vars->accu_prob_overflows also reduces the size of the structure pie_vars to exactly 64 bytes. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04pie: remove unnecessary type castingLeslie Monis1-2/+2
In function pie_calculate_probability(), the variables alpha and beta are of type u64. The variables qdelay, qdelay_old and params->target are of type psched_time_t (which is also u64). The explicit type casting done when calculating the value for the variable delta is redundant and not required. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04pie: use term backlog instead of qlenLeslie Monis1-11/+11
Remove ambiguity by using the term backlog instead of qlen when representing the queue length in bytes. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net/sched: act_ct: Use pskb_network_may_pull()Paul Blakey1-8/+8
To make the filler functions more generic, use network relative skb pulling. Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net/sched: act_ct: Fix ipv6 lookup of offloaded connectionsPaul Blakey1-34/+26
When checking the protocol number tcf_ct_flow_table_lookup() handles the flow as if it's always ipv4, while it can be ipv6. Instead, refactor the code to fetch the tcp header, if available, in the relevant family (ipv4/ipv6) filler function, and do the check on the returned tcp header. Fixes: 46475bb20f4b ("net/sched: act_ct: Software offload of established flows") Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/sched: act_ct: Software offload of established flowsPaul Blakey1-2/+158
Offload nf conntrack processing by looking up the 5-tuple in the zone's flow table. The nf conntrack module will process the packets until a connection is in established state. Once in established state, the ct state pointer (nf_conn) will be restored on the skb from a successful ft lookup. Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/sched: act_ct: Offload established connections to flow tablePaul Blakey1-0/+63
Add a ft entry when connections enter an established state and delete the connections when they leave the established state. The flow table assumes ownership of the connection. In the following patch act_ct will lookup the ct state from the FT. In future patches, drivers will register for callbacks for ft add/del events and will be able to use the information to offload the connections. Note that connection aging is managed by the FT. Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 12:50:19 +0000