summaryrefslogtreecommitdiffstats
path: root/net/sched
AgeCommit message (Collapse)AuthorFilesLines
2016-03-06net: sched: fix act_ipt for LOG targetPhil Sutter1-0/+2
Before calling the destroy() or target() callbacks, the family parameter field has to be initialized. Otherwise at least the LOG target will refuse to work and upon removal oops the kernel. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18net_sched fix: reclassification needs to consider ether protocol changesJamal Hadi Salim1-0/+1
actions could change the etherproto in particular with ethernet tunnelled data. Typically such actions, after peeling the outer header, will ask for the packet to be reclassified. We then need to restart the classification with the new proto header. Example setup used to catch this: sudo tc qdisc add dev $ETH ingress sudo $TC filter add dev $ETH parent ffff: pref 1 protocol 802.1Q \ u32 match u32 0 0 flowid 1:1 \ action vlan pop reclassify Fixes: 3b3ae880266d ("net: sched: consolidate tc_classify{,_compat}") Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net_sched: drr: check for NULL pointer in drr_dequeueBernie Harris1-0/+2
There are cases where qdisc_dequeue_peeked can return NULL, and the result is dereferenced later on in the function. Similarly to the other qdisc dequeue functions, check whether the skb pointer is NULL and if it is, goto out. Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+8
Conflicts: drivers/net/bonding/bond_main.c drivers/net/ethernet/mellanox/mlxsw/spectrum.h drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c The bond_main.c and mellanox switch conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11sched,cls_flower: set key address type when presentJamal Hadi Salim1-2/+8
only when user space passes the addresses should we consider their presence Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net, sched: add clsact qdiscDaniel Borkmann3-7/+97
This work adds a generalization of the ingress qdisc as a qdisc holding only classifiers. The clsact qdisc works on ingress, but also on egress. In both cases, it's execution happens without taking the qdisc lock, and the main difference for the egress part compared to prior version of [1] is that this can be applied with _any_ underlying real egress qdisc (also classless ones). Besides solving the use-case of [1], that is, allowing for more programmability on assigning skb->priority for the mqprio case that is supported by most popular 10G+ NICs, it also opens up a lot more flexibility for other tc applications. The main work on classification can already be done at clsact egress time if the use-case allows and state stored for later retrieval f.e. again in skb->priority with major/minors (which is checked by most classful qdiscs before consulting tc_classify()) and/or in other skb fields like skb->tc_index for some light-weight post-processing to get to the eventual classid in case of a classful qdisc. Another use case is that the clsact egress part allows to have a central egress counterpart to the ingress classifiers, so that classifiers can easily share state (e.g. in cls_bpf via eBPF maps) for ingress and egress. Currently, default setups like mq + pfifo_fast would require for this to use, for example, prio qdisc instead (to get a tc_classify() run) and to duplicate the egress classifier for each queue. With clsact, it allows for leaving the setup as is, it can additionally assign skb->priority to put the skb in one of pfifo_fast's bands and it can share state with maps. Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid) w/o the need to perform a skb_dst_force() to hold on to it any longer. In lwt case, we can also use this facility to setup dst metadata via cls_bpf (bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for that (case of IFF_NO_QUEUE devices, for example). The realization can be done without any changes to the scheduler core framework. All it takes is that we have two a-priori defined minors/child classes, where we can mux between ingress and egress classifier list (dev->ingress_cl_list and dev->egress_cl_list, latter stored close to dev->_tx to avoid extra cacheline miss for moderate loads). The egress part is a bit similar modelled to handle_ing() and patched to a noop in case the functionality is not used. Both handlers are now called sch_handle_ingress() and sch_handle_egress(), code sharing among the two doesn't seem practical as there are various minor differences in both paths, so that making them conditional in a single handler would rather slow things down. Full compatibility to ingress qdisc is provided as well. Since both piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist per netdevice, and thus ingress qdisc specific behaviour can be retained for user space. This means, either a user does 'tc qdisc add dev foo ingress' and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact' alternative, where both, ingress and egress classifier can be configured as in the below example. ingress qdisc supports attaching classifier to any minor number whereas clsact has two fixed minors for muxing between the lists, therefore to not break user space setups, they are better done as two separate qdiscs. I decided to extend the sch_ingress module with clsact functionality so that commonly used code can be reused, the module is being aliased with sch_clsact so that it can be auto-loaded properly. Alternative would have been to add a flag when initializing ingress to alter its behaviour plus aliasing to a different name (as it's more than just ingress). However, the first would end up, based on the flag, choosing the new/old behaviour by calling different function implementations to handle each anyway, the latter would require to register ingress qdisc once again under different alias. So, this really begs to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops by its own that share callbacks used by both. Example, adding qdisc: # tc qdisc add dev foo clsact # tc qdisc show dev foo qdisc mq 0: root qdisc pfifo_fast 0: parent :1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :3 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :4 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc clsact ffff: parent ffff:fff1 Adding filters (deleting, etc works analogous by specifying ingress/egress): # tc filter add dev foo ingress bpf da obj bar.o sec ingress # tc filter add dev foo egress bpf da obj bar.o sec egress # tc filter show dev foo ingress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action # tc filter show dev foo egress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will show an empty list for clsact. Either using the parent names (ingress/egress) or specifying the full major/minor will then show the related filter lists. Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend. [1] http://patchwork.ozlabs.org/patch/512949/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net, sched: add skb_at_tc_ingress helperDaniel Borkmann1-5/+1
Add a skb_at_tc_ingress() as this will be needed elsewhere as well and can hide the ugly ifdef. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: sched: fix missing free per cpu on qstatsJohn Fastabend1-1/+3
When a qdisc is using per cpu stats (currently just the ingress qdisc) only the bstats are being freed. This also free's the qstats. Fixes: b0ab6f92752b9f9d8 ("net: sched: enable per cpu qstats") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15net_sched: make qdisc_tree_decrease_qlen() work for non mqEric Dumazet1-1/+1
Stas Nichiporovich reported a regression in his HFSC qdisc setup on a non multi queue device. It turns out I mistakenly added a TCQ_F_NOPARENT flag on all qdisc allocated in qdisc_create() for non multi queue devices, which was rather buggy. I was clearly mislead by the TCQ_F_ONETXQUEUE that is also set here for no good reason, since it only matters for the root qdisc. Fixes: 4eaf3b84f288 ("net_sched: fix qdisc_tree_decrease_qlen() races") Reported-by: Stas Nichiporovich <stasn77@gmail.com> Tested-by: Stas Nichiporovich <stasn77@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03net_sched: fix qdisc_tree_decrease_qlen() racesEric Dumazet4-14/+23
qdisc_tree_decrease_qlen() suffers from two problems on multiqueue devices. One problem is that it updates sch->q.qlen and sch->qstats.drops on the mq/mqprio root qdisc, while it should not : Daniele reported underflows errors : [ 681.774821] PAX: sch->q.qlen: 0 n: 1 [ 681.774825] PAX: size overflow detected in function qdisc_tree_decrease_qlen net/sched/sch_api.c:769 cicus.693_49 min, count: 72, decl: qlen; num: 0; context: sk_buff_head; [ 681.774954] CPU: 2 PID: 19 Comm: ksoftirqd/2 Tainted: G O 4.2.6.201511282239-1-grsec #1 [ 681.774955] Hardware name: ASUSTeK COMPUTER INC. X302LJ/X302LJ, BIOS X302LJ.202 03/05/2015 [ 681.774956] ffffffffa9a04863 0000000000000000 0000000000000000 ffffffffa990ff7c [ 681.774959] ffffc90000d3bc38 ffffffffa95d2810 0000000000000007 ffffffffa991002b [ 681.774960] ffffc90000d3bc68 ffffffffa91a44f4 0000000000000001 0000000000000001 [ 681.774962] Call Trace: [ 681.774967] [<ffffffffa95d2810>] dump_stack+0x4c/0x7f [ 681.774970] [<ffffffffa91a44f4>] report_size_overflow+0x34/0x50 [ 681.774972] [<ffffffffa94d17e2>] qdisc_tree_decrease_qlen+0x152/0x160 [ 681.774976] [<ffffffffc02694b1>] fq_codel_dequeue+0x7b1/0x820 [sch_fq_codel] [ 681.774978] [<ffffffffc02680a0>] ? qdisc_peek_dequeued+0xa0/0xa0 [sch_fq_codel] [ 681.774980] [<ffffffffa94cd92d>] __qdisc_run+0x4d/0x1d0 [ 681.774983] [<ffffffffa949b2b2>] net_tx_action+0xc2/0x160 [ 681.774985] [<ffffffffa90664c1>] __do_softirq+0xf1/0x200 [ 681.774987] [<ffffffffa90665ee>] run_ksoftirqd+0x1e/0x30 [ 681.774989] [<ffffffffa90896b0>] smpboot_thread_fn+0x150/0x260 [ 681.774991] [<ffffffffa9089560>] ? sort_range+0x40/0x40 [ 681.774992] [<ffffffffa9085fe4>] kthread+0xe4/0x100 [ 681.774994] [<ffffffffa9085f00>] ? kthread_worker_fn+0x170/0x170 [ 681.774995] [<ffffffffa95d8d1e>] ret_from_fork+0x3e/0x70 mq/mqprio have their own ways to report qlen/drops by folding stats on all their queues, with appropriate locking. A second problem is that qdisc_tree_decrease_qlen() calls qdisc_lookup() without proper locking : concurrent qdisc updates could corrupt the list that qdisc_match_from_root() parses to find a qdisc given its handle. Fix first problem adding a TCQ_F_NOPARENT qdisc flag that qdisc_tree_decrease_qlen() can use to abort its tree traversal, as soon as it meets a mq/mqprio qdisc children. Second problem can be fixed by RCU protection. Qdisc are already freed after RCU grace period, so qdisc_list_add() and qdisc_list_del() simply have to use appropriate rcu list variants. A future patch will add a per struct netdev_queue list anchor, so that qdisc_tree_decrease_qlen() can have more efficient lookups. Reported-by: Daniele Fucini <dfucini@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <cwang@twopensource.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08net_sched: em_meta: use skb_to_full_sk() helperEric Dumazet1-46/+92
SYNACK packets might be attached to request sockets. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08sched: cls_flow: use skb_to_full_sk() helperEric Dumazet1-4/+11
SYNACK packets might be attached to request sockets. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03net: sched: kill dead code in sch_choke.cPhil Sutter1-59/+0
It looks like this has never been used at all. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-5/+24
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11net: synack packets can be attached to request socketsEric Dumazet1-1/+2
selinux needs few changes to accommodate fact that SYNACK messages can be attached to a request socket, lacking sk_security pointer (Only syncookies are still attached to a TCP_LISTEN socket) Adds a new sk_listener() helper, and use it in selinux and sch_fq Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported by: kernel test robot <ying.huang@linux.intel.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Eric Paris <eparis@parisplace.org> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11sch_hhf: fix return value of hhf_drop()WANG Cong1-1/+10
Similar to commit c0afd9ce4d6a ("fq_codel: fix return value of fq_codel_drop()") ->drop() is supposed to return the number of bytes it dropped, but hhf_drop () returns the id of the bucket where it drops a packet from. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Terry Lam <vtlam@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/sched: make sch_blackhole.c explicitly non-modularPaul Gortmaker1-12/+3
The Kconfig currently controlling compilation of this code is: net/sched/Kconfig:menuconfig NET_SCHED net/sched/Kconfig: bool "QoS and/or fair queueing" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We can change to one of the other priority initcalls (subsys?) at any later date, if desired. We also delete the MODULE_LICENSE tag since all that information is already contained at the top of the file in the comments. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08act_mirred: clear sender cpu before sending to txWANG Cong1-0/+1
Similar to commit c29390c6dfee ("xps: must clear sender_cpu before forwarding") the skb->sender_cpu needs to be cleared when moving from Rx Tx, otherwise kernel could crash. Fixes: 2bd82484bb4c ("xps: fix xps for stacked devices") Cc: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05act_mirred: always release tcf hashWANG Cong1-3/+3
Align with other tc actions. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05act_mirred: fix a race condition on mirred_listWANG Cong1-1/+10
After commit 1ce87720d456 ("net: sched: make cls_u32 lockless") we began to release tc actions in a RCU callback. However, mirred action relies on RTNL lock to protect the global mirred_list, therefore we could have a race condition between RCU callback and netdevice event, which caused a list corruption as reported by Vinson. Instead of relying on RTNL lock, introduce a spinlock to protect this list. Note, in non-bind case, it is still called with RTNL lock, therefore should disable BH too. Reported-by: Vinson Lee <vlee@twopensource.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03sched, bpf: add helper for retrieving routing realmsDaniel Borkmann1-2/+6
Using routing realms as part of the classifier is quite useful, it can be viewed as a tag for one or multiple routing entries (think of an analogy to net_cls cgroup for processes), set by user space routing daemons or via iproute2 as an indicator for traffic classifiers and later on processed in the eBPF program. Unlike actions, the classifier can inspect device flags and enable netif_keep_dst() if necessary. tc actions don't have that possibility, but in case people know what they are doing, it can be used from there as well (e.g. via devs that must keep dsts by design anyway). If a realm is set, the handler returns the non-zero realm. User space can set the full 32bit realm for the dst. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03tcp: attach SYNACK messages to request sockets instead of listenerEric Dumazet1-5/+7
If a listen backlog is very big (to avoid syncookies), then the listener sk->sk_wmem_alloc is the main source of false sharing, as we need to touch it twice per SYNACK re-transmit and TX completion. (One SYN packet takes listener lock once, but up to 6 SYNACK are generated) By attaching the skb to the request socket, we remove this source of contention. Tested: listen(fd, 10485760); // single listener (no SO_REUSEPORT) 16 RX/TX queue NIC Sustain a SYNFLOOD attack of ~320,000 SYN per second, Sending ~1,400,000 SYNACK per second. Perf profiles now show listener spinlock being next bottleneck. 20.29% [kernel] [k] queued_spin_lock_slowpath 10.06% [kernel] [k] __inet_lookup_established 5.12% [kernel] [k] reqsk_timer_handler 3.22% [kernel] [k] get_next_timer_interrupt 3.00% [kernel] [k] tcp_make_synack 2.77% [kernel] [k] ipt_do_table 2.70% [kernel] [k] run_timer_softirq 2.50% [kernel] [k] ip_finish_output 2.04% [kernel] [k] cascade Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-15/+15
Conflicts: net/ipv4/arp.c The net/ipv4/arp.c conflict was one commit adding a new local variable while another commit was deleting one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24net: revert "net_sched: move tp->root allocation into fw_init()"WANG Cong1-15/+15
fw filter uses tp->root==NULL to check if it is the old method, so it doesn't need allocation at all in this case. This patch reverts the offending commit and adds some comments for old method to make it obvious. Fixes: 33f8b9ecdb15 ("net_sched: move tp->root allocation into fw_init()") Reported-by: Akshat Kakkar <akshat.1984@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23cls_bpf: further limit exec opcodes subsetDaniel Borkmann1-3/+0
Jamal suggested to further limit the currently allowed subset of opcodes that may be used by a direct action return code as the intention is not to replace the full action engine, but rather to have a minimal set that can be used in the fast-path on things like ingress for some features that cls_bpf supports. Classifiers can, of course, still be chained together that have direct action mode with those that have a full exec pass. For more complex scenarios that go beyond this minimal set here, the full tcf_exts_exec() path must be used. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23cls_bpf: make binding to classid optionalDaniel Borkmann1-9/+8
The binding to a particular classid was so far always mandatory for cls_bpf, but it doesn't need to be. Therefore, lift this restriction as similarly done in other classifiers. Only a couple of qdiscs make use of class from the tcf_result, others don't strictly care, so let the user choose his needs (those that read out class can handle situations where it could be NULL). An explicit check for tcf_unbind_filter() is also not needed here, as the previous r->class was 0, so the xchg() will return that and therefore a callback to the qdisc's unbind_tcf() is skipped. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23cls_bpf: also dump TCA_BPF_FLAGSDaniel Borkmann1-3/+8
In commit 43388da42a49 ("cls_bpf: introduce integrated actions") we have added TCA_BPF_FLAGS. We can also retrieve this information from the prog, dump it back to user space as well. It's useful in tc when displaying/dumping filter info. Also, remove tp from cls_bpf_prog_from_efd(), came in as a conflict from a rebase and it's unused here (later work may add it along with a real user). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18netfilter: nf_conntrack: Add a struct net parameter to l4_pkt_to_tupleEric W. Biederman1-1/+1
As gre does not have the srckey in the packet gre_pkt_to_tuple needs to perform a lookup in it's per network namespace tables. Pass in the proper network namespace to all pkt_to_tuple implementations to ensure gre (and any similar protocols) can get this right. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-09-18act_connmark: Remember the struct net instead of guessing it.Eric W. Biederman1-1/+2
Stop guessing the struct net instead of remember it. Guessing is just silly and will be problematic in the future when I implement routes between network namespaces. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-09-18netfilter: x_tables: Pass struct net in xt_action_paramEric W. Biederman2-0/+2
As xt_action_param lives on the stack this does not bloat any persistent data structures. This is a first step in making netfilter code that needs to know which network namespace it is executing in simpler. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-09-17sch_dsmark: improve memory localityEric Dumazet1-30/+33
Memory placement in sch_dsmark is silly : Better place mask/value in the same cache line. Also, we can embed small arrays in the first cache line and remove a potential cache miss. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17bpf: add bpf_redirect() helperAlexei Starovoitov2-0/+2
Existing bpf_clone_redirect() helper clones skb before redirecting it to RX or TX of destination netdev. Introduce bpf_redirect() helper that does that without cloning. Benchmarked with two hosts using 10G ixgbe NICs. One host is doing line rate pktgen. Another host is configured as: $ tc qdisc add dev $dev ingress $ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \ action bpf run object-file tcbpf1_kern.o section clone_redirect_xmit drop so it receives the packet on $dev and immediately xmits it on $dev + 1 The section 'clone_redirect_xmit' in tcbpf1_kern.o file has the program that does bpf_clone_redirect() and performance is 2.0 Mpps $ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \ action bpf run object-file tcbpf1_kern.o section redirect_xmit drop which is using bpf_redirect() - 2.4 Mpps and using cls_bpf with integrated actions as: $ tc filter add dev $dev root pref 10 \ bpf run object-file tcbpf1_kern.o section redirect_xmit integ_act classid 1 performance is 2.5 Mpps To summarize: u32+act_bpf using clone_redirect - 2.0 Mpps u32+act_bpf using redirect - 2.4 Mpps cls_bpf using redirect - 2.5 Mpps For comparison linux bridge in this setup is doing 2.1 Mpps and ixgbe rx + drop in ip_rcv - 7.8 Mpps Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17cls_bpf: introduce integrated actionsDaniel Borkmann1-11/+49
Often cls_bpf classifier is used with single action drop attached. Optimize this use case and let cls_bpf return both classid and action. For backwards compatibility reasons enable this feature under TCA_BPF_FLAG_ACT_DIRECT flag. Then more interesting programs like the following are easier to write: int cls_bpf_prog(struct __sk_buff *skb) { /* classify arp, ip, ipv6 into different traffic classes * and drop all other packets */ switch (skb->protocol) { case htons(ETH_P_ARP): skb->tc_classid = 1; break; case htons(ETH_P_IP): skb->tc_classid = 2; break; case htons(ETH_P_IPV6): skb->tc_classid = 3; break; default: return TC_ACT_SHOT; } return TC_ACT_OK; } Joint work with Daniel Borkmann. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Add flags argument to skb_flow_dissector functionsTom Herbert3-4/+4
The flags argument will allow control of the dissection process (for instance whether to parse beyond L3). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: sched: don't break line in tc_classify loop notificationDaniel Borkmann1-5/+4
Just some minor noise follow-up to address some stylistic issues of commit 3b3ae880266d ("net: sched: consolidate tc_classify{,_compat}"). Accidentally v1 instead of v2 of that commit got applied, so this patch adds the relative diff. Suggested-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+13
2015-08-27net: sched: simplify attach_one_default_qdisc()Phil Sutter1-29/+12
Now that noqueue qdisc can be attached just like any other qdisc, no special treatment is necessary anymore when attaching it as default qdisc. This change has the added benefit that 'tc qdisc show' prints noqueue instead of nothing for devices defaulting to noqueue. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: sched: register noqueue qdiscPhil Sutter2-1/+12
This way users can attach noqueue just like any other qdisc using tc without having to mess with tx_queue_len first. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: sched: ignore tx_queue_len when assigning default qdiscPhil Sutter1-2/+1
Since alloc_netdev_mqs() sets IFF_NO_QUEUE for drivers not initializing tx_queue_len, it is safe to assume that if tx_queue_len is zero, dev->priv flags always contains IFF_NO_QUEUE. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: sched: consolidate tc_classify{,_compat}Daniel Borkmann14-43/+38
For classifiers getting invoked via tc_classify(), we always need an extra function call into tc_classify_compat(), as both are being exported as symbols and tc_classify() itself doesn't do much except handling of reclassifications when tp->classify() returned with TC_ACT_RECLASSIFY. CBQ and ATM are the only qdiscs that directly call into tc_classify_compat(), all others use tc_classify(). When tc actions are being configured out in the kernel, tc_classify() effectively does nothing besides delegating. We could spare this layer and consolidate both functions. pktgen on single CPU constantly pushing skbs directly into the netif_receive_skb() path with a dummy classifier on ingress qdisc attached, improves slightly from 22.3Mpps to 23.1Mpps. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26net_sched: act_bpf: remove spinlock in fast pathAlexei Starovoitov1-17/+19
Similar to act_gact/act_mirred, act_bpf can be lockless in packet processing with extra care taken to free bpf programs after rcu grace period. Replacement of existing act_bpf (very rare) is done with synchronize_rcu() and final destruction is done from tc_action_ops->cleanup() callback that is called from tcf_exts_destroy()->tcf_action_destroy()->__tcf_hash_release() when bind and refcnt reach zero which is only possible when classifier is destroyed. Previous two patches fixed the last two classifiers (tcindex and rsvp) to call tcf_exts_destroy() from rcu callback. Similar to gact/mirred there is a race between prog->filter and prog->tcf_action. Meaning that the program being replaced may use previous default action if it happened to return TC_ACT_UNSPEC. act_mirred race betwen tcf_action and tcfm_dev is similar. In all cases the race is harmless. Long term we may want to improve the situation by replacing the whole tc_action->priv as single pointer instead of updating inner fields one by one. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26net_sched: convert rsvp to call tcf_exts_destroy from rcu callbackAlexei Starovoitov1-4/+14
Adjust destroy path of cls_rsvp to call tcf_exts_destroy() after rcu grace period. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26net_sched: convert tcindex to call tcf_exts_destroy from rcu callbackAlexei Starovoitov1-4/+25
Adjust destroy path of cls_tcindex to call tcf_exts_destroy() after rcu grace period. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26net_sched: act_bpf: remove unnecessary copyAlexei Starovoitov1-1/+1
Fix harmless typo and avoid unnecessary copy of empty 'prog' into unused 'strcut tcf_bpf_cfg old'. Fixes: f4eaed28c783 ("act_bpf: fix memory leaks when replacing bpf programs") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26net_sched: make tcf_hash_destroy() staticAlexei Starovoitov1-2/+1
tcf_hash_destroy() used once. Make it static. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25cls_u32: complete the check for non-forced case in u32_destroy()WANG Cong1-0/+13
In commit 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") I added a check in u32_destroy() to see if all real filters are gone for each tp, however, that is only done for root_ht, same is needed for others. This can be reproduced by the following tc commands: tc filter add dev eth0 parent 1:0 prio 5 handle 15: protocol ip u32 divisor 256 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:2 u32 ht 15:2: match ip src 10.0.0.2 flowid 1:10 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:3 u32 ht 15:2: match ip src 10.0.0.3 flowid 1:10 Fixes: 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") Reported-by: Akshat Kakkar <akshat.1984@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21Merge branch 'master' of ↵Pablo Neira Ayuso9-25/+38
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next Resolve conflicts with conntrack template fixes. Conflicts: net/netfilter/nf_conntrack_core.c net/netfilter/nf_synproxy_core.c net/netfilter/xt_CT.c Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-18net: sched: drop all special handling of tx_queue_len == 0Phil Sutter5-17/+9
Those were all workarounds for the formerly double meaning of tx_queue_len, which broke scheduling algorithms if untreated. Now that all in-tree drivers have been converted away from setting tx_queue_len = 0, it should be safe to drop these workarounds for categorically broken setups. Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Change pseudohdr argument of inet_proto_csum_replace* to be a boolTom Herbert1-3/+4
inet_proto_csum_replace4,2,16 take a pseudohdr argument which indicates the checksum field carries a pseudo header. This argument should be a boolean instead of an int. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18netfilter: nf_conntrack: add direction support for zonesDaniel Borkmann1-0/+1
This work adds a direction parameter to netfilter zones, so identity separation can be performed only in original/reply or both directions (default). This basically opens up the possibility of doing NAT with conflicting IP address/port tuples from multiple, isolated tenants on a host (e.g. from a netns) without requiring each tenant to NAT twice resp. to use its own dedicated IP address to SNAT to, meaning overlapping tuples can be made unique with the zone identifier in original direction, where the NAT engine will then allocate a unique tuple in the commonly shared default zone for the reply direction. In some restricted, local DNAT cases, also port redirection could be used for making the reply traffic unique w/o requiring SNAT. The consensus we've reached and discussed at NFWS and since the initial implementation [1] was to directly integrate the direction meta data into the existing zones infrastructure, as opposed to the ct->mark approach we proposed initially. As we pass the nf_conntrack_zone object directly around, we don't have to touch all call-sites, but only those, that contain equality checks of zones. Thus, based on the current direction (original or reply), we either return the actual id, or the default NF_CT_DEFAULT_ZONE_ID. CT expectations are direction-agnostic entities when expectations are being compared among themselves, so we can only use the identifier in this case. Note that zone identifiers can not be included into the hash mix anymore as they don't contain a "stable" value that would be equal for both directions at all times, f.e. if only zone->id would unconditionally be xor'ed into the table slot hash, then replies won't find the corresponding conntracking entry anymore. If no particular direction is specified when configuring zones, the behaviour is exactly as we expect currently (both directions). Support has been added for the CT netlink interface as well as the x_tables raw CT target, which both already offer existing interfaces to user space for the configuration of zones. Below a minimal, simplified collision example (script in [2]) with netperf sessions: +--- tenant-1 ---+ mark := 1 | netperf |--+ +----------------+ | CT zone := mark [ORIGINAL] [ip,sport] := X +--------------+ +--- gateway ---+ | mark routing |--| SNAT |-- ... + +--------------+ +---------------+ | +--- tenant-2 ---+ | ~~~|~~~ | netperf |--+ +-----------+ | +----------------+ mark := 2 | netserver |------ ... + [ip,sport] := X +-----------+ [ip,port] := Y On the gateway netns, example: iptables -t raw -A PREROUTING -j CT --zone mark --zone-dir ORIGINAL iptables -t nat -A POSTROUTING -o <dev> -j SNAT --to-source <ip> --random-fully iptables -t mangle -A PREROUTING -m conntrack --ctdir ORIGINAL -j CONNMARK --save-mark iptables -t mangle -A POSTROUTING -m conntrack --ctdir REPLY -j CONNMARK --restore-mark conntrack dump from gateway netns: netperf -H 10.1.1.2 -t TCP_STREAM -l60 -p12865,5555 from each tenant netns tcp 6 431995 ESTABLISHED src=40.1.1.1 dst=10.1.1.2 sport=5555 dport=12865 zone-orig=1 src=10.1.1.2 dst=10.1.1.1 sport=12865 dport=1024 [ASSURED] mark=1 secctx=system_u:object_r:unlabeled_t:s0 use=1 tcp 6 431994 ESTABLISHED src=40.1.1.1 dst=10.1.1.2 sport=5555 dport=12865 zone-orig=2 src=10.1.1.2 dst=10.1.1.1 sport=12865 dport=5555 [ASSURED] mark=2 secctx=system_u:object_r:unlabeled_t:s0 use=1 tcp 6 299 ESTABLISHED src=40.1.1.1 dst=10.1.1.2 sport=39438 dport=33768 zone-orig=1 src=10.1.1.2 dst=10.1.1.1 sport=33768 dport=39438 [ASSURED] mark=1 secctx=system_u:object_r:unlabeled_t:s0 use=1 tcp 6 300 ESTABLISHED src=40.1.1.1 dst=10.1.1.2 sport=32889 dport=40206 zone-orig=2 src=10.1.1.2 dst=10.1.1.1 sport=40206 dport=32889 [ASSURED] mark=2 secctx=system_u:object_r:unlabeled_t:s0 use=2 Taking this further, test script in [2] creates 200 tenants and runs original-tuple colliding netperf sessions each. A conntrack -L dump in the gateway netns also confirms 200 overlapping entries, all in ESTABLISHED state as expected. I also did run various other tests with some permutations of the script, to mention some: SNAT in random/random-fully/persistent mode, no zones (no overlaps), static zones (original, reply, both directions), etc. [1] http://thread.gmane.org/gmane.comp.security.firewalls.netfilter.devel/57412/ [2] https://paste.fedoraproject.org/242835/65657871/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 23:59:21 +0000