summaryrefslogtreecommitdiffstats
path: root/net/rfkill
AgeCommit message (Collapse)AuthorFilesLines
2022-03-18rfkill: make new event layout opt-inJohannes Berg1-14/+34
Again new complaints surfaced that we had broken the ABI here, although previously all the userspace tools had agreed that it was their mistake and fixed it. Yet now there are cases (e.g. RHEL) that want to run old userspace with newer kernels, and thus are broken. Since this is a bit of a whack-a-mole thing, change the whole extensibility scheme of rfkill to no longer just rely on the message lengths, but instead require userspace to opt in via a new ioctl to a given maximum event size that it is willing to understand. By default, set that to RFKILL_EVENT_SIZE_V1 (8), so that the behaviour for userspace not calling the ioctl will look as if it's just running on an older kernel. Fixes: 14486c82612a ("rfkill: add a reason to the HW rfkill state") Cc: stable@vger.kernel.org # 5.11+ Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220316212749.16491491b270.Ifcb1950998330a596f29a2a162e00b7546a1d6d0@changeid
2021-12-20rfkill: allow to get the software rfkill stateEmmanuel Grumbach1-0/+12
iwlwifi needs to be able to differentiate between the software rfkill state and the hardware rfkill state. The reason for this is that iwlwifi needs to notify any change in the software rfkill state even when it doesn't own the device (which means even when the hardware rfkill is asserted). In order to be able to know the software rfkill when the host does not own the device, iwlwifi needs to be able to ask the state of the software rfkill ignoring the state of the hardware rfkill. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20211219195124.125689-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-20Merge tag 'mac80211-next-for-net-next-2021-04-20' of ↵David S. Miller1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of updates, all over the map: * set sk_pacing_shift for 802.3->802.11 encap offload * some monitor support for 802.11->802.3 decap offload * HE (802.11ax) spec updates * userspace API for TDLS HE support * along with various other small features, cleanups and fixups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08rfkill: use DEFINE_SPINLOCK() for spinlockGuobin Huang1-3/+1
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Link: https://lore.kernel.org/r/1617711116-49370-1-git-send-email-huangguobin4@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08rfkill: revert back to old userspace API by defaultJohannes Berg1-3/+4
Recompiling with the new extended version of struct rfkill_event broke systemd in *two* ways: - It used "sizeof(struct rfkill_event)" to read the event, but then complained if it actually got something != 8, this broke it on new kernels (that include the updated API); - It used sizeof(struct rfkill_event) to write a command, but didn't implement the intended expansion protocol where the kernel returns only how many bytes it accepted, and errored out due to the unexpected smaller size on kernels that didn't include the updated API. Even though systemd has now been fixed, that fix may not be always deployed, and other applications could potentially have similar issues. As such, in the interest of avoiding regressions, revert the default API "struct rfkill_event" back to the original size. Instead, add a new "struct rfkill_event_ext" that extends it by the new field, and even more clearly document that applications should be prepared for extensions in two ways: * write might only accept fewer bytes on older kernels, and will return how many to let userspace know which data may have been ignored; * read might return anything between 8 (the original size) and whatever size the application sized its buffer at, indicating how much event data was supported by the kernel. Perhaps that will help avoid such issues in the future and we won't have to come up with another version of the struct if we ever need to extend it again. Applications that want to take advantage of the new field will have to be modified to use struct rfkill_event_ext instead now, which comes with the danger of them having already been updated to use it from 'struct rfkill_event', but I found no evidence of that, and it's still relatively new. Cc: stable@vger.kernel.org # 5.11 Reported-by: Takashi Iwai <tiwai@suse.de> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-r4 (x86-64) Link: https://lore.kernel.org/r/20210319232510.f1a139cfdd9c.Ic5c7c9d1d28972059e132ea653a21a427c326678@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11rfkill: add a reason to the HW rfkill stateEmmanuel Grumbach1-7/+34
The WLAN device may exist yet not be usable. This can happen when the WLAN device is controllable by both the host and some platform internal component. We need some arbritration that is vendor specific, but when the device is not available for the host, we need to reflect this state towards the user space. Add a reason field to the rfkill object (and event) so that userspace can know why the device is in rfkill: because some other platform component currently owns the device, or because the actual hw rfkill signal is asserted. Capable userspace can now determine the reason for the rfkill and possibly do some negotiation on a side band channel using a proprietary protocol to gain ownership on the device in case the device is owned by some other component. When the host gains ownership on the device, the kernel can remove the RFKILL_HARD_BLOCK_NOT_OWNER reason and the hw rfkill state will be off. Then, the userspace can bring the device up and start normal operation. The rfkill_event structure is enlarged to include the additional byte, it is now 9 bytes long. Old user space will ask to read only 8 bytes so that the kernel can know not to feed them with more data. When the user space writes 8 bytes, new kernels will just read what is present in the file descriptor. This new byte is read only from the userspace standpoint anyway. If a new user space uses an old kernel, it'll ask to read 9 bytes but will get only 8, and it'll know that it didn't get the new state. When it'll write 9 bytes, the kernel will again ignore this new byte which is read only from the userspace standpoint. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20201104134641.28816-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-12rfkill: Fix use-after-free in rfkill_resume()Claire Chang1-0/+3
If a device is getting removed or reprobed during resume, use-after-free might happen. For example, h5_btrtl_resume() schedules a work queue for device reprobing, which of course requires removal first. If the removal happens in parallel with the device_resume() and wins the race to acquire device_lock(), removal may remove the device from the PM lists and all, but device_resume() is already running and will continue when the lock can be acquired, thus calling rfkill_resume(). During this, if rfkill_set_block() is then called after the corresponding *_unregister() and kfree() are called, there will be an use-after-free in hci_rfkill_set_block(): BUG: KASAN: use-after-free in hci_rfkill_set_block+0x58/0xc0 [bluetooth] ... Call trace: dump_backtrace+0x0/0x154 show_stack+0x20/0x2c dump_stack+0xbc/0x12c print_address_description+0x88/0x4b0 __kasan_report+0x144/0x168 kasan_report+0x10/0x18 check_memory_region+0x19c/0x1ac __kasan_check_write+0x18/0x24 hci_rfkill_set_block+0x58/0xc0 [bluetooth] rfkill_set_block+0x9c/0x120 rfkill_resume+0x34/0x70 dpm_run_callback+0xf0/0x1f4 device_resume+0x210/0x22c Fix this by checking rfkill->registered in rfkill_resume(). device_del() in rfkill_unregister() requires device_lock() and the whole rfkill_resume() is also protected by the same lock via device_resume(), we can make sure either the rfkill->registered is false before rfkill_resume() starts or the rfkill device won't be unregistered before rfkill_resume() returns. As async_resume() holds a reference to the device, at this level there can be no use-after-free; only in the user that doesn't expect this scenario. Fixes: 8589086f4efd ("Bluetooth: hci_h5: Turn off RTL8723BS on suspend, reprobe on resume") Signed-off-by: Claire Chang <tientzu@chromium.org> Link: https://lore.kernel.org/r/20201110084908.219088-1-tientzu@chromium.org [edit commit message for clarity and add more info provided later] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-12-16rfkill: Fix incorrect check to avoid NULL pointer dereferenceAditya Pakki1-2/+5
In rfkill_register, the struct rfkill pointer is first derefernced and then checked for NULL. This patch removes the BUG_ON and returns an error to the caller in case rfkill is NULL. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Link: https://lore.kernel.org/r/20191215153409.21696-1-pakki001@umn.edu Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-05rfkill: allocate static minorMarcel Holtmann1-2/+7
udev has a feature of creating /dev/<node> device-nodes if it finds a devnode:<node> modalias. This allows for auto-loading of modules that provide the node. This requires to use a statically allocated minor number for misc character devices. However, rfkill uses dynamic minor numbers and prevents auto-loading of the module. So allocate the next static misc minor number and use it for rfkill. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Link: https://lore.kernel.org/r/20191024174042.19851-1-marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-23compat_ioctl: move more drivers to compat_ptr_ioctlArnd Bergmann1-1/+1
The .ioctl and .compat_ioctl file operations have the same prototype so they can both point to the same function, which works great almost all the time when all the commands are compatible. One exception is the s390 architecture, where a compat pointer is only 31 bit wide, and converting it into a 64-bit pointer requires calling compat_ptr(). Most drivers here will never run in s390, but since we now have a generic helper for it, it's easy enough to use it consistently. I double-checked all these drivers to ensure that all ioctl arguments are used as pointers or are ignored, but are not interpreted as integer values. Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2-9/+2
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner1-13/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1Thomas Gleixner1-14/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov1-1/+1
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2018-12-18rfkill: gpio: Remove unused includeLinus Walleij1-1/+0
The legacy <linux/gpio.h> header is no longer in use by the rfkill driver, so drop this include. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
2018-09-03Merge tag 'mac80211-for-davem-2018-09-03' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here are quite a large number of fixes, notably: * various A-MSDU building fixes (currently only affects mt76) * syzkaller & spectre fixes in hwsim * TXQ vs. teardown fix that was causing crashes * embed WMM info in reg rule, bad code here had been causing crashes * one compilation issue with fix from Arnd (rfkill-gpio includes) * fixes for a race and bad data during/after channel switch * nl80211: a validation fix, attribute type & unit fixes along with other small fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28rfkill: fix spelling mistake contidion to conditionRichard Guy Briggs1-2/+2
This came about while trying to determine if there would be any pattern match on contid, a new audit container identifier internal variable. This was the only one. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-14rfkill-gpio: include linux/mod_devicetable.hArnd Bergmann1-0/+1
One more driver is apparently broken by the recent change to linux/platform_device.h: net/rfkill/rfkill-gpio.c: In function 'rfkill_gpio_acpi_probe': net/rfkill/rfkill-gpio.c:82:29: error: dereferencing pointer to incomplete type 'const struct acpi_device_id' Include linux/mod_devicetable.h to get the definition of the acpi_device_id structure. Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-07-05leds: triggers: let struct led_trigger::activate() return an error codeUwe Kleine-König1-1/+3
Given that activating a trigger can fail, let the callback return an indication. This prevents to have a trigger active according to the "trigger" sysfs attribute but not functional. All users are changed accordingly to return 0 for now. There is no intended change in behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-05-23rfkill: Create rfkill-none LED triggerJoão Paulo Rechi Vita1-7/+20
Creates a new trigger rfkill-none, as a complement to rfkill-any, which drives LEDs when any radio is enabled. The new trigger is meant to turn a LED ON whenever all radios are OFF, and turn it OFF otherwise. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-23rfkill: Rename rfkill_any_led_trigger* functionsJoão Paulo Rechi Vita1-23/+24
Rename these functions to rfkill_global_led_trigger*, as they are going to be extended to handle another global rfkill led trigger. This commit does not change any functionality. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-07rfkill: gpio: fix memory leak in probe error pathJohan Hovold1-1/+6
Make sure to free the rfkill device in case registration fails during probe. Fixes: 5e7ca3937fbe ("net: rfkill: gpio: convert to resource managed allocation") Cc: stable <stable@vger.kernel.org> # 3.13 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-2/+2
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27net: annotate ->poll() instancesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-13net: rfkill: gpio: Switch to devm_acpi_dev_add_driver_gpios()Andy Shevchenko1-4/+1
Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify error path and fix potentially wrong assingment if ->probe() fails. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-24rfkill: remove rfkill-regulatorJohannes Berg3-166/+0
There are no users of this ("vrfkill") in the tree, so it's just dead code - remove it. This also isn't really how rfkill is supposed to be used - it's intended as a signalling mechanism to/from the device, which the driver (and partially cfg80211) will handle - having a separate rfkill instance for a regulator is confusing, the driver should use the regulator instead to turn off the device when requested. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-09rfkill: Add rfkill-any LED triggerMichał Kępień1-1/+71
Add a new "global" (i.e. not per-rfkill device) LED trigger, rfkill-any, which may be useful on laptops with a single "radio LED" and multiple radio transmitters. The trigger is meant to turn a LED on whenever there is at least one radio transmitter active and turn it off otherwise. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-20Revert "rfkill: Add rfkill-any LED trigger"Johannes Berg1-74/+1
This reverts commit 73f4f76a196d7adb11a1e192bd8024fe0bc83910. As Mike reported, and I should've seen in review, we can't call the new LED functions, which acquire the mutex, from places like rfkill_set_sw_state() that are documented to be callable from any context the user likes to use. For Mike's case it led to a deadlock, but other scenarios are possible. Reported-by: Михаил Кринкин <krinkin.m.u@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-16rfkill: hide unused goto labelArnd Bergmann1-0/+2
A cleanup introduced a harmless warning in some configurations: net/rfkill/core.c: In function 'rfkill_init': net/rfkill/core.c:1350:1: warning: label 'error_input' defined but not used [-Wunused-label] This adds another #ifdef around the label to match that around the caller. Fixes: 6124c53edeea ("rfkill: Cleanup error handling in rfkill_init()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-13rfkill: Add rfkill-any LED triggerMichał Kępień1-0/+73
Add a new "global" (i.e. not per-rfkill device) LED trigger, rfkill-any, which may be useful on laptops with a single "radio LED" and multiple radio transmitters. The trigger is meant to turn a LED on whenever there is at least one radio transmitter active and turn it off otherwise. This requires taking rfkill_global_mutex before calling rfkill_set_block() in rfkill_resume(): since __rfkill_any_led_trigger_event() is called from rfkill_set_block() unconditionally, each caller of the latter needs to take care of locking rfkill_global_mutex. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-13rfkill: Cleanup error handling in rfkill_init()Michał Kępień1-11/+12
Use a separate label per error condition in rfkill_init() to make it a bit cleaner and easier to extend. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-13rfkill: simplify rfkill_set_hw_state() slightlyJohannes Berg1-4/+1
Simplify the two conditions gating the schedule_work() into a single one and get rid of the additional exit point from the function in doing so. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05rfkill: Use switch to demux userspace operationsJoão Paulo Rechi Vita1-14/+22
Using a switch to handle different ev.op values in rfkill_fop_write() makes the code easier to extend, as out-of-range values can always be handled by the default case. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> [roll in fix for RFKILL_OP_CHANGE from Jouni] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-01Merge tag 'mac80211-next-for-davem-2016-02-26' of ↵David S. Miller3-106/+93
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another round of updates for -next: * big A-MSDU RX performance improvement (avoid linearize of paged RX) * rfkill changes: cleanups, documentation, platform properties * basic PBSS support in cfg80211 * MU-MIMO action frame processing support * BlockAck reordering & duplicate detection offload support * various cleanups & little fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24rfkill: Factor rfkill_global_states[].cur assignmentsJoão Paulo Rechi Vita1-21/+17
Factor all assignments to rfkill_global_states[].cur into a single function rfkill_update_global_state(). Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24rfkill: Remove extra blank lineJoão Paulo Rechi Vita1-1/+0
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24rfkill: Improve documentation languageJoão Paulo Rechi Vita1-2/+2
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24net: rfkill: gpio: remove rfkill_gpio_platform_dataHeikki Krogerus2-10/+1
No more users for it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24net: rfkill: gpio: get the name and type from device propertyHeikki Krogerus1-5/+11
This prepares the driver for removal of platform data. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24net: rfkill: add rfkill_find_type functionHeikki Krogerus1-28/+30
Helper for finding the type based on name. Useful if the type needs to be determined based on device property. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> [modify rfkill_types array and BUILD_BUG_ON to not cause errors] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24rfkill: Remove obsolete "claim" sysfs interfaceJoão Paulo Rechi Vita1-10/+1
This was scheduled to be removed in 2012 by: commit 69c86373c6ea1149aa559e6088362d58d8ec8835 Author: florian@mickler.org <florian@mickler.org> Date: Wed Feb 24 12:05:16 2010 +0100 Document the rfkill sysfs ABI This moves sysfs ABI info from Documentation/rfkill.txt to the ABI subfolder and reformats it. This also schedules the deprecated sysfs parts to be removed in 2012 (claim file) and 2014 (state file). Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24rfkill: remove/inline __rfkill_set_hw_stateJoão Paulo Rechi Vita1-26/+15
__rfkill_set_hw_state() is only one used in rfkill_set_hw_state(), and none of them are long or complicated, so merging the two makes the code easier to read. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24rfkill: use variable instead of duplicating the expressionJoão Paulo Rechi Vita1-1/+1
RFKILL_BLOCK_SW value have just been saved to prev, no need to check it again in the if expression. This makes code a little bit easier to read. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24rfkill: disentangle polling pause and suspendJohannes Berg1-2/+15
When suspended while polling is paused, polling will erroneously resume at resume time. Fix this by tracking pause and suspend in separate state variable and adding the necessary checks. Clarify the documentation on this as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-26rfkill: fix rfkill_fop_read wait_event usageJohannes Berg1-12/+4
The code within wait_event_interruptible() is called with !TASK_RUNNING, so mustn't call any functions that can sleep, like mutex_lock(). Since we re-check the list_empty() in a loop after the wait, it's safe to simply use list_empty() without locking. This bug has existed forever, but was only discovered now because all userspace implementations, including the default 'rfkill' tool, use poll() or select() to get a readable fd before attempting to read. Cc: stable@vger.kernel.org Fixes: c64fb01627e24 ("rfkill: create useful userspace interface") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-04Bluetooth: hci_bcm: move all Broadcom ACPI IDs to BCM HCI driverHeikki Krogerus1-4/+0
The IDs should all be for Broadcom BCM43241 module, and hci_bcm is now the proper driver for them. This removes one of two different ways of handling PM with the module. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10rfkill: copy the name into the rfkill structJohannes Berg1-3/+3
Some users of rfkill, like NFC and cfg80211, use a dynamic name when allocating rfkill, in those cases dev_name(). Therefore, the pointer passed to rfkill_alloc() might not be valid forever, I specifically found the case that the rfkill name was quite obviously an invalid pointer (or at least garbage) when the wiphy had been renamed. Fix this by making a copy of the rfkill name in rfkill_alloc(). Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>