| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
MHI channel may generates event/interrupt right after enabling.
It may leads to 2 race conditions issues.
1)
Such event may be dropped by qcom_mhi_qrtr_dl_callback() at check:
if (!qdev || mhi_res->transaction_status)
return;
Because dev_set_drvdata(&mhi_dev->dev, qdev) may be not performed at
this moment. In this situation qrtr-ns will be unable to enumerate
services in device.
---------------------------------------------------------------
2)
Such event may come at the moment after dev_set_drvdata() and
before qrtr_endpoint_register(). In this case kernel will panic with
accessing wrong pointer at qcom_mhi_qrtr_dl_callback():
rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr,
mhi_res->bytes_xferd);
Because endpoint is not created yet.
--------------------------------------------------------------
So move mhi_prepare_for_transfer_autoqueue after endpoint creation
to fix it.
Fixes: a2e2cc0dbb11 ("net: qrtr: Start MHI channels during init")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Hemant Kumar <quic_hemantk@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_recv_datagram() has two parameters 'flags' and 'noblock' that are
merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0)'
As 'flags' may contain MSG_DONTWAIT as value most callers split the 'flags'
into 'flags' and 'noblock' with finally obsolete bit operations like this:
skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &rc);
And this is not even done consistently with the 'flags' parameter.
This patch removes the obsolete and costly splitting into two parameters
and only performs bit operations when really needed on the caller side.
One missing conversion thankfully reported by kernel test robot. I missed
to enable kunit tests to build the mctp code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new API "mhi_prepare_for_transfer_autoqueue" for using with client
drivers like QRTR to request MHI core to autoqueue buffers for the DL
channel along with starting both UL and DL channels.
So far, the "auto_queue" flag specified by the controller drivers in
channel definition served this purpose but this will be removed at some
point in future.
Cc: netdev@vger.kernel.org
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20211216081227.237749-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Previously with CONFIG_QRTR=m a separate ns.ko would be built which
wasn't done on purpose and should be included in qrtr.ko.
Rename qrtr.c to af_qrtr.c so we can build a qrtr.ko with both af_qrtr.c
and ns.c.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20210928171156.6353-1-luca@z3ntu.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I tried to make this check stricter as a hardenning measure but it broke
audo and wifi on these devices so revert it.
Fixes: aaa8e4922c88 ("net: qrtr: make checks in qrtr_endpoint_post() stricter")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These checks are still not strict enough. The main problem is that if
"cb->type == QRTR_TYPE_NEW_SERVER" is true then "len - hdrlen" is
guaranteed to be 4 but we need to be at least 16 bytes. In fact, we
can reject everything smaller than sizeof(*pkt) which is 20 bytes.
Also I don't like the ALIGN(size, 4). It's better to just insist that
data is needs to be aligned at the start.
Fixes: 0baa99ee353c ("net: qrtr: Allow non-immediate node routing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit ce78ffa3ef1681065ba451cfd545da6126f5ca88.
Wren and Nicolas reported that ath11k was failing to initialise QCA6390
Wi-Fi 6 device with error:
qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22
Commit ce78ffa3ef16 ("net: really fix the build..."), introduced in
v5.14-rc5, caused this regression in qrtr. Most likely all ath11k
devices are broken, but I only tested QCA6390. Let's revert the broken
commit so that ath11k works again.
Reported-by: Wren Turkal <wt@penguintechs.org>
Reported-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210826172816.24478-1-kvalo@codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This check was incomplete, did not consider size is 0:
if (len != ALIGN(size, 4) + hdrlen)
goto err;
if size from qrtr_hdr is 0, the result of ALIGN(size, 4)
will be 0, In case of len == hdrlen and size == 0
in header this check won't fail and
if (cb->type == QRTR_TYPE_NEW_SERVER) {
/* Remote node endpoint can bridge other distant nodes */
const struct qrtr_ctrl_pkt *pkt = data + hdrlen;
qrtr_node_assign(node, le32_to_cpu(pkt->server.node));
}
will also read out of bound from data, which is hdrlen allocated block.
Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Fixes: ad9d24c9429e ("net: qrtr: fix OOB Read in qrtr_endpoint_post")
Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Build failure in drivers/net/wwan/mhi_wwan_mbim.c:
add missing parameter (0, assuming we don't want buffer pre-alloc).
Conflict in drivers/net/dsa/sja1105/sja1105_main.c between:
589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too")
0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode")
Follow the instructions from the commit message of the former commit
- removed the if conditions. When looking at commit 589918df9322 ("net:
dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too")
note that the mask_iotag fields get removed by the following patch.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicting commits, all resolutions pretty trivial:
drivers/bus/mhi/pci_generic.c
5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
drivers/nfc/s3fwrn5/firmware.c
a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label")
46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
MAINTAINERS
7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot reported memory leak in qrtr. The problem was in unputted
struct sock. qrtr_local_enqueue() function calls qrtr_port_lookup()
which takes sock reference if port was found. Then there is the following
check:
if (!ipc || &ipc->sk == skb->sk) {
...
return -ENODEV;
}
Since we should drop the reference before returning from this function and
ipc can be non-NULL inside this if, we should add qrtr_port_put() inside
this if.
The similar corner case is in qrtr_endpoint_post() as Manivannan
reported. In case of sock_queue_rcv_skb() failure we need to put
port reference to avoid leaking struct sock pointer.
Fixes: e04df98adf7d ("net: qrtr: Remove receive worker")
Fixes: bdabad3e363d ("net: Add Qualcomm IPC router")
Reported-and-tested-by: syzbot+35a511c72ea7356cdcf3@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
compat_ifreq_ioctl() is one of the last users of copy_in_user() and
compat_alloc_user_space(), as it attempts to convert the 'struct ifreq'
arguments from 32-bit to 64-bit format as used by dev_ioctl() and a
couple of socket family specific interpretations.
The current implementation works correctly when calling dev_ioctl(),
inet_ioctl(), ieee802154_sock_ioctl(), atalk_ioctl(), qrtr_ioctl()
and packet_ioctl(). The ioctl handlers for x25, netrom, rose and x25 do
not interpret the arguments and only block the corresponding commands,
so they do not care.
For af_inet6 and af_decnet however, the compat conversion is slightly
incorrect, as it will copy more data than the native handler accesses,
both of them use a structure that is shorter than ifreq.
Replace the copy_in_user() conversion with a pair of accessor functions
to read and write the ifreq data in place with the correct length where
needed, while leaving the other ones to copy the (already compatible)
structures directly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot reported slab-out-of-bounds Read in
qrtr_endpoint_post. The problem was in wrong
_size_ type:
if (len != ALIGN(size, 4) + hdrlen)
goto err;
If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of
ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293
in header this check won't fail and
skb_put_data(skb, data + hdrlen, size);
will read out of bound from data, which is hdrlen allocated block.
Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Reported-and-tested-by: syzbot+1917d778024161609247@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix to return a negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: c6e08d6251f3 ("net: qrtr: Allocate workqueue before kernel_bind")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
It is possible that the MHI ul_callback will be invoked immediately
following the queueing of the skb for transmission, leading to the
callback decrementing the refcount of the associated sk and freeing the
skb.
As such the dereference of skb and the increment of the sk refcount must
happen before the skb is queued, to avoid the skb to be used after free
and potentially the sk to drop its last refcount..
Fixes: 6e728f321393 ("net: qrtr: Add MHI transport layer")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The XArray interface is easier for this driver to use. Also fixes a
bug reported by the improper use of GFP_ATOMIC.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qrtr_tx_wait does not check for radix_tree_insert failure, causing
the 'flow' object to be unreferenced after qrtr_tx_wait return. Fix
that by releasing flow on radix_tree_insert failure.
Fixes: 5fdeb0d372ab ("net: qrtr: Implement outgoing flow control")
Reported-by: syzbot+739016799a89c530b32a@syzkaller.appspotmail.com
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct sockaddr_qrtr has a 2-byte hole, and qrtr_recvmsg() currently
does not clear it before copying kernel data to user space.
It might be too late to name the hole since sockaddr_qrtr structure is uapi.
BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x9c/0xb0 mm/kmsan/kmsan_hooks.c:249
CPU: 0 PID: 29705 Comm: syz-executor.3 Not tainted 5.11.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:120
kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118
kmsan_internal_check_memory+0x202/0x520 mm/kmsan/kmsan.c:402
kmsan_copy_to_user+0x9c/0xb0 mm/kmsan/kmsan_hooks.c:249
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
_copy_to_user+0x1ac/0x270 lib/usercopy.c:33
copy_to_user include/linux/uaccess.h:209 [inline]
move_addr_to_user+0x3a2/0x640 net/socket.c:237
____sys_recvmsg+0x696/0xd50 net/socket.c:2575
___sys_recvmsg net/socket.c:2610 [inline]
do_recvmmsg+0xa97/0x22d0 net/socket.c:2710
__sys_recvmmsg net/socket.c:2789 [inline]
__do_sys_recvmmsg net/socket.c:2812 [inline]
__se_sys_recvmmsg+0x24a/0x410 net/socket.c:2805
__x64_sys_recvmmsg+0x62/0x80 net/socket.c:2805
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x465f69
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f43659d6188 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 000000000056bf60 RCX: 0000000000465f69
RDX: 0000000000000008 RSI: 0000000020003e40 RDI: 0000000000000003
RBP: 00000000004bfa8f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000010060 R11: 0000000000000246 R12: 000000000056bf60
R13: 0000000000a9fb1f R14: 00007f43659d6300 R15: 0000000000022000
Local variable ----addr@____sys_recvmsg created at:
____sys_recvmsg+0x168/0xd50 net/socket.c:2550
____sys_recvmsg+0x168/0xd50 net/socket.c:2550
Bytes 2-3 of 12 are uninitialized
Memory access of size 12 starts at ffff88817c627b40
Data copied to user address 0000000020000140
Fixes: bdabad3e363d ("net: Add Qualcomm IPC router")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Courtney Cavin <courtney.cavin@sonymobile.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When sock_alloc_send_skb() returns NULL to skb, no error return code of
qrtr_sendmsg() is assigned.
To fix this bug, rc is assigned with -ENOMEM in this case.
Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot found WARNING in __alloc_pages_nodemask()[1] when order >= MAX_ORDER.
It was caused by a huge length value passed from userspace to qrtr_tun_write_iter(),
which tries to allocate skb. Since the value comes from the untrusted source
there is no need to raise a warning in __alloc_pages_nodemask().
[1] WARNING in __alloc_pages_nodemask+0x5f8/0x730 mm/page_alloc.c:5014
Call Trace:
__alloc_pages include/linux/gfp.h:511 [inline]
__alloc_pages_node include/linux/gfp.h:524 [inline]
alloc_pages_node include/linux/gfp.h:538 [inline]
kmalloc_large_node+0x60/0x110 mm/slub.c:3999
__kmalloc_node_track_caller+0x319/0x3f0 mm/slub.c:4496
__kmalloc_reserve net/core/skbuff.c:150 [inline]
__alloc_skb+0x4e4/0x5a0 net/core/skbuff.c:210
__netdev_alloc_skb+0x70/0x400 net/core/skbuff.c:446
netdev_alloc_skb include/linux/skbuff.h:2832 [inline]
qrtr_endpoint_post+0x84/0x11b0 net/qrtr/qrtr.c:442
qrtr_tun_write_iter+0x11f/0x1a0 net/qrtr/tun.c:98
call_write_iter include/linux/fs.h:1901 [inline]
new_sync_write+0x426/0x650 fs/read_write.c:518
vfs_write+0x791/0xa30 fs/read_write.c:605
ksys_write+0x12d/0x250 fs/read_write.c:658
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+80dccaee7c6630fa9dcf@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If qrtr_endpoint_register() failed, tun is leaked.
Fix this, by freeing tun in error path.
syzbot report:
BUG: memory leak
unreferenced object 0xffff88811848d680 (size 64):
comm "syz-executor684", pid 10171, jiffies 4294951561 (age 26.070s)
hex dump (first 32 bytes):
80 dd 0a 84 ff ff ff ff 00 00 00 00 00 00 00 00 ................
90 d6 48 18 81 88 ff ff 90 d6 48 18 81 88 ff ff ..H.......H.....
backtrace:
[<0000000018992a50>] kmalloc include/linux/slab.h:552 [inline]
[<0000000018992a50>] kzalloc include/linux/slab.h:682 [inline]
[<0000000018992a50>] qrtr_tun_open+0x22/0x90 net/qrtr/tun.c:35
[<0000000003a453ef>] misc_open+0x19c/0x1e0 drivers/char/misc.c:141
[<00000000dec38ac8>] chrdev_open+0x10d/0x340 fs/char_dev.c:414
[<0000000079094996>] do_dentry_open+0x1e6/0x620 fs/open.c:817
[<000000004096d290>] do_open fs/namei.c:3252 [inline]
[<000000004096d290>] path_openat+0x74a/0x1b00 fs/namei.c:3369
[<00000000b8e64241>] do_filp_open+0xa0/0x190 fs/namei.c:3396
[<00000000a3299422>] do_sys_openat2+0xed/0x230 fs/open.c:1172
[<000000002c1bdcef>] do_sys_open fs/open.c:1188 [inline]
[<000000002c1bdcef>] __do_sys_openat fs/open.c:1204 [inline]
[<000000002c1bdcef>] __se_sys_openat fs/open.c:1199 [inline]
[<000000002c1bdcef>] __x64_sys_openat+0x7f/0xe0 fs/open.c:1199
[<00000000f3a5728f>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
[<000000004b38b7ec>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 28fb4e59a47d ("net: qrtr: Expose tunneling endpoint to user space")
Reported-by: syzbot+5d6e4af21385f5cfc56a@syzkaller.appspotmail.com
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Link: https://lore.kernel.org/r/20210221234427.GA2140@DESKTOP
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found WARNING in qrtr_tun_write_iter [1] when write_iter length
exceeds KMALLOC_MAX_SIZE causing order >= MAX_ORDER condition.
Additionally, there is no check for 0 length write.
[1]
WARNING: mm/page_alloc.c:5011
[..]
Call Trace:
alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267
alloc_pages include/linux/gfp.h:547 [inline]
kmalloc_order+0x2e/0xb0 mm/slab_common.c:837
kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853
kmalloc include/linux/slab.h:557 [inline]
kzalloc include/linux/slab.h:682 [inline]
qrtr_tun_write_iter+0x8a/0x180 net/qrtr/tun.c:83
call_write_iter include/linux/fs.h:1901 [inline]
Reported-by: syzbot+c2a7e5c5211605a90865@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Link: https://lore.kernel.org/r/20210202092059.1361381-1-snovitoll@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A null-ptr-deref bug is reported by Hulk Robot like this:
--------------
KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f]
Call Trace:
qrtr_ns_remove+0x22/0x40 [ns]
qrtr_proto_fini+0xa/0x31 [qrtr]
__x64_sys_delete_module+0x337/0x4e0
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x468ded
--------------
When qrtr_ns_init fails in qrtr_proto_init, qrtr_ns_remove which would
be called later on would raise a null-ptr-deref because qrtr_ns.workqueue
has been destroyed.
Fix it by making qrtr_ns_init have a return value and adding a check in
qrtr_proto_init.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.11
First set of patches for v5.11. rtw88 getting improvements to work
better with Bluetooth and other driver also getting some new features.
mhi-ath11k-immutable branch was pulled from mhi tree to avoid
conflicts with mhi tree.
Major changes:
rtw88
* major bluetooth co-existance improvements
wilc1000
* Wi-Fi Multimedia (WMM) support
ath11k
* Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
probe response support
* qcom,ath11k-calibration-variant Device Tree setting
* cold boot calibration support
* new DFS region: JP
wnc36xx
* enable connection monitoring and keepalive in firmware
ath10k
* firmware IRAM recovery feature
mhi
* merge mhi-ath11k-immutable branch to make MHI API change go smoothly
* tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits)
wl1251: remove trailing semicolon in macro definition
airo: remove trailing semicolon in macro definition
wilc1000: added queue support for WMM
wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt()
wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path
wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path
wilc1000: added 'ndo_set_mac_address' callback support
brcmfmac: expose firmware config files through modinfo
wlcore: Switch to using the new API kobj_to_dev()
rtw88: coex: add feature to enhance HID coexistence performance
rtw88: coex: upgrade coexistence A2DP mechanism
rtw88: coex: add action for coexistence in hardware initial
rtw88: coex: add function to avoid cck lock
rtw88: coex: change the coexistence mechanism for WLAN connected
rtw88: coex: change the coexistence mechanism for HID
rtw88: coex: update AFH information while in free-run mode
rtw88: coex: update the mechanism for A2DP + PAN
rtw88: coex: add debug message
rtw88: coex: run coexistence when WLAN entering/leaving LPS
Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices"
...
====================
Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reset MHI device channels when driver remove is called due to
module unload or any crash scenario. This will make sure that
MHI channels no longer remain enabled for transfers since the
MHI stack does not take care of this anymore after the auto-start
channels feature was removed.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Start MHI device channels so that transfers can be performed.
The MHI stack does not auto-start channels anymore.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Distant QRTR nodes can be accessed via an other node that acts as
a bridge. When the a QRTR endpoint associated to a bridge node is
released, all the linked distant nodes should also be released.
This patch fixes endpoint release by:
- Submitting QRTR BYE message locally on behalf of all the nodes
accessible through the endpoint.
- Removing all the routable node IDs from radix tree pointing to
the released node endpoint.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This will be requested for allocating control packet in atomic context.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to reach non-immediate remote node services that are
accessed through an intermediate node, the route to the remote
node needs to be saved.
E.g for a [node1 <=> node2 <=> node3] network
- node2 forwards node3 service to node1
- node1 must save node2 as route for reaching node3
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A remote endpoint (immediate neighbors node) can forward services
from other nodes (non-immadiate), in that case ctrl packet node ID
(offering distant service) can differ from the qrtr source node
(forwarding the packet).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The port ID for control messages was uncorrectly set with broadcast
node ID value, causing message to be dropped on remote side since
not passing packet filtering (cb->dst_port != QRTR_PORT_CTRL).
Fixes: d27e77a3de28 ("net: qrtr: Reset the node and port ID of broadcast messages")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rcu_read_lock() is not supposed to lock the kernel_sendmsg() API
since it has the lock_sock() in qrtr_sendmsg() which will sleep. Hence,
fix it by excluding the locking for kernel_sendmsg().
While at it, let's also use radix_tree_deref_retry() to confirm the
validity of the pointer returned by radix_tree_deref_slot() and use
radix_tree_iter_resume() to resume iterating the tree properly before
releasing the lock as suggested by Doug.
Fixes: a7809ff90ce6 ("net: qrtr: ns: Protect radix_tree_deref_slot() using rcu read locks")
Reported-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The rcu read locks are needed to avoid potential race condition while
dereferencing radix tree from multiple threads. The issue was identified
by syzbot. Below is the crash report:
=============================
WARNING: suspicious RCU usage
5.7.0-syzkaller #0 Not tainted
-----------------------------
include/linux/radix-tree.h:176 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by kworker/u4:1/21:
#0: ffff88821b097938 ((wq_completion)qrtr_ns_handler){+.+.}-{0:0}, at: spin_unlock_irq include/linux/spinlock.h:403 [inline]
#0: ffff88821b097938 ((wq_completion)qrtr_ns_handler){+.+.}-{0:0}, at: process_one_work+0x6df/0xfd0 kernel/workqueue.c:2241
#1: ffffc90000dd7d80 ((work_completion)(&qrtr_ns.work)){+.+.}-{0:0}, at: process_one_work+0x71e/0xfd0 kernel/workqueue.c:2243
stack backtrace:
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.7.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: qrtr_ns_handler qrtr_ns_worker
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1e9/0x30e lib/dump_stack.c:118
radix_tree_deref_slot include/linux/radix-tree.h:176 [inline]
ctrl_cmd_new_lookup net/qrtr/ns.c:558 [inline]
qrtr_ns_worker+0x2aff/0x4500 net/qrtr/ns.c:674
process_one_work+0x76e/0xfd0 kernel/workqueue.c:2268
worker_thread+0xa7f/0x1450 kernel/workqueue.c:2414
kthread+0x353/0x380 kernel/kthread.c:268
Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Reported-and-tested-by: syzbot+0f84f6eed90503da72fc@syzkaller.appspotmail.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If skb_put_padto() returns an error, skb has been freed.
Better not touch it anymore, as reported by syzbot [1]
Note to qrtr maintainers : this suggests qrtr_sendmsg()
should adjust sock_alloc_send_skb() second parameter
to account for the potential added alignment to avoid
reallocation.
[1]
BUG: KASAN: use-after-free in __skb_insert include/linux/skbuff.h:1907 [inline]
BUG: KASAN: use-after-free in __skb_queue_before include/linux/skbuff.h:2016 [inline]
BUG: KASAN: use-after-free in __skb_queue_tail include/linux/skbuff.h:2049 [inline]
BUG: KASAN: use-after-free in skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146
Write of size 8 at addr ffff88804d8ab3c0 by task syz-executor.4/4316
CPU: 1 PID: 4316 Comm: syz-executor.4 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1d6/0x29e lib/dump_stack.c:118
print_address_description+0x66/0x620 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report+0x132/0x1d0 mm/kasan/report.c:530
__skb_insert include/linux/skbuff.h:1907 [inline]
__skb_queue_before include/linux/skbuff.h:2016 [inline]
__skb_queue_tail include/linux/skbuff.h:2049 [inline]
skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146
qrtr_tun_send+0x1a/0x40 net/qrtr/tun.c:23
qrtr_node_enqueue+0x44f/0xc00 net/qrtr/qrtr.c:364
qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861
qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
sock_write_iter+0x317/0x470 net/socket.c:998
call_write_iter include/linux/fs.h:1882 [inline]
new_sync_write fs/read_write.c:503 [inline]
vfs_write+0xa96/0xd10 fs/read_write.c:578
ksys_write+0x11b/0x220 fs/read_write.c:631
do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45d5b9
Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f84b5b81c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000038b40 RCX: 000000000045d5b9
RDX: 0000000000000055 RSI: 0000000020001240 RDI: 0000000000000003
RBP: 00007f84b5b81ca0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000f
R13: 00007ffcbbf86daf R14: 00007f84b5b829c0 R15: 000000000118cf4c
Allocated by task 4316:
kasan_save_stack mm/kasan/common.c:48 [inline]
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc+0x100/0x130 mm/kasan/common.c:461
slab_post_alloc_hook+0x3e/0x290 mm/slab.h:518
slab_alloc mm/slab.c:3312 [inline]
kmem_cache_alloc+0x1c1/0x2d0 mm/slab.c:3482
skb_clone+0x1b2/0x370 net/core/skbuff.c:1449
qrtr_bcast_enqueue+0x6d/0x140 net/qrtr/qrtr.c:857
qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
sock_write_iter+0x317/0x470 net/socket.c:998
call_write_iter include/linux/fs.h:1882 [inline]
new_sync_write fs/read_write.c:503 [inline]
vfs_write+0xa96/0xd10 fs/read_write.c:578
ksys_write+0x11b/0x220 fs/read_write.c:631
do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 4316:
kasan_save_stack mm/kasan/common.c:48 [inline]
kasan_set_track+0x3d/0x70 mm/kasan/common.c:56
kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355
__kasan_slab_free+0xdd/0x110 mm/kasan/common.c:422
__cache_free mm/slab.c:3418 [inline]
kmem_cache_free+0x82/0xf0 mm/slab.c:3693
__skb_pad+0x3f5/0x5a0 net/core/skbuff.c:1823
__skb_put_padto include/linux/skbuff.h:3233 [inline]
skb_put_padto include/linux/skbuff.h:3252 [inline]
qrtr_node_enqueue+0x62f/0xc00 net/qrtr/qrtr.c:360
qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861
qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
sock_write_iter+0x317/0x470 net/socket.c:998
call_write_iter include/linux/fs.h:1882 [inline]
new_sync_write fs/read_write.c:503 [inline]
vfs_write+0xa96/0xd10 fs/read_write.c:578
ksys_write+0x11b/0x220 fs/read_write.c:631
do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88804d8ab3c0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 0 bytes inside of
224-byte region [ffff88804d8ab3c0, ffff88804d8ab4a0)
The buggy address belongs to the page:
page:00000000ea8cccfb refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804d8abb40 pfn:0x4d8ab
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002237ec8 ffffea00029b3388 ffff88821bb66800
raw: ffff88804d8abb40 ffff88804d8ab000 000000010000000b 0000000000000000
page dumped because: kasan: bad access detected
Fixes: ce57785bf91b ("net: qrtr: fix len of skb_put_padto in qrtr_node_enqueue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Carl Huang <cjhuang@codeaurora.org>
Cc: Wen Gong <wgong@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Passing large uint32 sockaddr_qrtr.port numbers for port allocation
triggers a warning within idr_alloc() since the port number is cast
to int, and thus interpreted as a negative number. This leads to
the rejection of such valid port numbers in qrtr_port_assign() as
idr_alloc() fails.
To avoid the problem, switch to idr_alloc_u32() instead.
Fixes: bdabad3e363d ("net: Add Qualcomm IPC router")
Reported-by: syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com
Signed-off-by: Necip Fazil Yildiran <necip@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have to detach sock from socket in qrtr_release(),
otherwise skb->sk may still reference to this socket
when the skb is released in tun->queue, particularly
sk->sk_wq still points to &sock->wq, which leads to
a UAF.
Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com
Fixes: 28fb4e59a47d ("net: qrtr: Expose tunneling endpoint to user space")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just check for a NULL method instead of wiring up
sock_no_{get,set}sockopt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This code assumes that the user passed in enough data for a
qrtr_hdr_v1 or qrtr_hdr_v2 struct, but it's not necessarily true. If
the buffer is too small then it will read beyond the end.
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reported-by: syzbot+b8fe393f999a291a9ea6@syzkaller.appspotmail.com
Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The flow is allocated in qrtr_tx_wait, but not freed when qrtr node
is released. (*slot) becomes NULL after radix_tree_iter_delete is
called in __qrtr_node_release. The fix is to save (*slot) to a
vairable and then free it.
This memory leak is catched when kmemleak is enabled in kernel,
the report looks like below:
unreferenced object 0xffffa0de69e08420 (size 32):
comm "kworker/u16:3", pid 176, jiffies 4294918275 (age 82858.876s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 28 84 e0 69 de a0 ff ff ........(..i....
28 84 e0 69 de a0 ff ff 03 00 00 00 00 00 00 00 (..i............
backtrace:
[<00000000e252af0a>] qrtr_node_enqueue+0x38e/0x400 [qrtr]
[<000000009cea437f>] qrtr_sendmsg+0x1e0/0x2a0 [qrtr]
[<000000008bddbba4>] sock_sendmsg+0x5b/0x60
[<0000000003beb43a>] qmi_send_message.isra.3+0xbe/0x110 [qmi_helpers]
[<000000009c9ae7de>] qmi_send_request+0x1c/0x20 [qmi_helpers]
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A null pointer dereference in qrtr_ns_data_ready() is seen if a client
opens a qrtr socket before qrtr_ns_init() can bind to the control port.
When the control port is bound, the ENETRESET error will be broadcasted
and clients will close their sockets. This results in DEL_CLIENT
packets being sent to the ns and qrtr_ns_data_ready() being called
without the workqueue being allocated.
Allocate the workqueue before setting sk_data_ready and binding to the
control port. This ensures that the work and workqueue structs are
allocated and initialized before qrtr_ns_data_ready can be called.
Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Chris Lew <clew@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
