summaryrefslogtreecommitdiffstats
path: root/net/openvswitch
AgeCommit message (Collapse)AuthorFilesLines
2022-02-24openvswitch: Fix setting ipv6 fields causing hw csum failurePaul Blakey1-8/+38
Ipv6 ttl, label and tos fields are modified without first pulling/pushing the ipv6 header, which would have updated the hw csum (if available). This might cause csum validation when sending the packet to the stack, as can be seen in the trace below. Fix this by updating skb->csum if available. Trace resulted by ipv6 ttl dec and then sending packet to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]: [295241.900063] s_pf0vf2: hw csum failure [295241.923191] Call Trace: [295241.925728] <IRQ> [295241.927836] dump_stack+0x5c/0x80 [295241.931240] __skb_checksum_complete+0xac/0xc0 [295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack] [295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack] [295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch] [295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch] [295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch] [295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch] [295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch] [295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch] [295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch] [295242.034074] __netif_receive_skb_core+0x2ca/0xcb0 [295242.047498] netif_receive_skb_internal+0x3e/0xc0 [295242.052291] napi_gro_receive+0xba/0xe0 [295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core] [295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core] [295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core] [295242.077958] net_rx_action+0x149/0x3b0 [295242.086762] __do_softirq+0xd7/0x2d6 [295242.090427] irq_exit+0xf7/0x100 [295242.093748] do_IRQ+0x7f/0xd0 [295242.096806] common_interrupt+0xf/0xf [295242.100559] </IRQ> [295242.102750] RIP: 0033:0x7f9022e88cbd [295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda [295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000 [295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30 [295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340 [295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000 [295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40 Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action") Signed-off-by: Paul Blakey <paulb@nvidia.com> Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-05net/sched: Enable tc skb ext allocation on chain miss only when neededPaul Blakey3-10/+13
Currently tc skb extension is used to send miss info from tc to ovs datapath module, and driver to tc. For the tc to ovs miss it is currently always allocated even if it will not be used by ovs datapath (as it depends on a requested feature). Export the static key which is used by openvswitch module to guard this code path as well, so it will be skipped if ovs datapath doesn't need it. Enable this code path once ovs datapath needs it. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+13
Merge in fixes directly in prep for the 5.17 merge window. No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09net: openvswitch: Fix ct_state nat flags for conns arriving from tcPaul Blakey1-3/+13
Netfilter conntrack maintains NAT flags per connection indicating whether NAT was configured for the connection. Openvswitch maintains NAT flags on the per packet flow key ct_state field, indicating whether NAT was actually executed on the packet. When a packet misses from tc to ovs the conntrack NAT flags are set. However, NAT was not necessarily executed on the packet because the connection's state might still be in NEW state. As such, openvswitch wrongly assumes that NAT was executed and sets an incorrect flow key NAT flags. Fix this, by flagging to openvswitch which NAT was actually done in act_ct via tc_skb_ext and tc_skb_cb to the openvswitch module, so the packet flow key NAT flags will be correctly set. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Paul Blakey <paulb@nvidia.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20220106153804.26451-1-paulb@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextJakub Kicinski1-5/+10
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next. This includes one patch to update ovs and act_ct to use nf_ct_put() instead of nf_conntrack_put(). 1) Add netns_tracker to nfnetlink_log and masquerade, from Eric Dumazet. 2) Remove redundant rcu read-size lock in nf_tables packet path. 3) Replace BUG() by WARN_ON_ONCE() in nft_payload. 4) Consolidate rule verdict tracing. 5) Replace WARN_ON() by WARN_ON_ONCE() in nf_tables core. 6) Make counter support built-in in nf_tables. 7) Add new field to conntrack object to identify locally generated traffic, from Florian Westphal. 8) Prevent NAT from shadowing well-known ports, from Florian Westphal. 9) Merge nf_flow_table_{ipv4,ipv6} into nf_flow_table_inet, also from Florian. 10) Remove redundant pointer in nft_pipapo AVX2 support, from Colin Ian King. 11) Replace opencoded max() in conntrack, from Jiapeng Chong. 12) Update conntrack to use refcount_t API, from Florian Westphal. 13) Move ip_ct_attach indirection into the nf_ct_hook structure. 14) Constify several pointer object in the netfilter codebase, from Florian Westphal. 15) Tree-wide replacement of nf_conntrack_put() by nf_ct_put(), also from Florian. 16) Fix egress splat due to incorrect rcu notation, from Florian. 17) Move stateful fields of connlimit, last, quota, numgen and limit out of the expression data area. 18) Build a blob to represent the ruleset in nf_tables, this is a requirement of the new register tracking infrastructure. 19) Add NFT_REG32_NUM to define the maximum number of 32-bit registers. 20) Add register tracking infrastructure to skip redundant store-to-register operations, this includes support for payload, meta and bitwise expresssions. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: (32 commits) netfilter: nft_meta: cancel register tracking after meta update netfilter: nft_payload: cancel register tracking after payload update netfilter: nft_bitwise: track register operations netfilter: nft_meta: track register operations netfilter: nft_payload: track register operations netfilter: nf_tables: add register tracking infrastructure netfilter: nf_tables: add NFT_REG32_NUM netfilter: nf_tables: add rule blob layout netfilter: nft_limit: move stateful fields out of expression data netfilter: nft_limit: rename stateful structure netfilter: nft_numgen: move stateful fields out of expression data netfilter: nft_quota: move stateful fields out of expression data netfilter: nft_last: move stateful fields out of expression data netfilter: nft_connlimit: move stateful fields out of expression data netfilter: egress: avoid a lockdep splat net: prefer nf_ct_put instead of nf_conntrack_put netfilter: conntrack: avoid useless indirection during conntrack destruction netfilter: make function op structures const netfilter: core: move ip_ct_attach indirection to struct nf_ct_hook netfilter: conntrack: convert to refcount_t api ... ==================== Link: https://lore.kernel.org/r/20220109231640.104123-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09net: prefer nf_ct_put instead of nf_conntrack_putFlorian Westphal1-4/+10
Its the same as nf_conntrack_put(), but without the need for an indirect call. The downside is a module dependency on nf_conntrack, but all of these already depend on conntrack anyway. Cc: Paul Blakey <paulb@mellanox.com> Cc: dev@openvswitch.org Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-09netfilter: conntrack: convert to refcount_t apiFlorian Westphal1-1/+0
Convert nf_conn reference counting from atomic_t to refcount_t based api. refcount_t api provides more runtime sanity checks and will warn on certain constructs, e.g. refcount_inc() on a zero reference count, which usually indicates use-after-free. For this reason template allocation is changed to init the refcount to 1, the subsequenct add operations are removed. Likewise, init_conntrack() is changed to set the initial refcount to 1 instead refcount_inc(). This is safe because the new entry is not (yet) visible to other cpus. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-01-04net: openvswitch: Fill act ct extensionPaul Blakey1-0/+6
To give drivers the originating device information for optimized connection tracking offload, fill in act ct extension with ifindex from skb. Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+7
include/net/sock.h commit 8f905c0e7354 ("inet: fully convert sk->sk_rx_dst to RCU rules") commit 43f51df41729 ("net: move early demux fields close to sk_refcnt") https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17net: openvswitch: Fix matching zone id for invalid conns arriving from tcPaul Blakey1-1/+7
Zone id is not restored if we passed ct and ct rejected the connection, as there is no ct info on the skb. Save the zone from tc skb cb to tc skb extension and pass it on to ovs, use that info to restore the zone id for invalid connections. Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct") Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-07openvswitch: add net device refcount tracker to struct vportEric Dumazet2-4/+6
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-02net: openvswitch: Remove redundant if statementsXu Wang1-2/+1
The 'if (dev)' statement already move into dev_{put , hold}, so remove redundant if statements. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-06include/linux/mm.h: move nr_free_buffer_pages from swap.h to mm.hMianhan Liu1-1/+0
nr_free_buffer_pages could be exposed through mm.h instead of swap.h. The advantage of this change is that it can reduce the obsolete includes. For example, net/ipv4/tcp.c wouldn't need swap.h any more since it has already included mm.h. Similarly, after checking all the other files, it comes that tcp.c, udp.c meter.c ,... follow the same rule, so these files can have swap.h removed too. Moreover, after preprocessing all the files that use nr_free_buffer_pages, it turns out that those files have already included mm.h.Thus, we can move nr_free_buffer_pages from swap.h to mm.h safely. This change will not affect the compilation of other files. Link: https://lkml.kernel.org/r/20210912133640.1624-1-liumh1@shanghaitech.edu.cn Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn> Cc: Jakub Kicinski <kuba@kernel.org> CC: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S . Miller" <davem@davemloft.net> Cc: Simon Horman <horms@verge.net.au> Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-18ovs: clear skb->tstamp in forwarding pathkaixi.fan1-0/+1
fq qdisc requires tstamp to be cleared in the forwarding path. Now ovs doesn't clear skb->tstamp. We encountered a problem with linux version 5.4.56 and ovs version 2.14.1, and packets failed to dequeue from qdisc when fq qdisc was attached to ovs port. Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Signed-off-by: kaixi.fan <fankaixi.li@bytedance.com> Signed-off-by: xiexiaohui <xiexiaohui.xxh@bytedance.com> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-6/+7
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09net: openvswitch: fix kernel-doc warnings in flow.cRandy Dunlap1-6/+7
Repair kernel-doc notation in a few places to make it conform to the expected format. Fixes the following kernel-doc warnings: flow.c:296: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Parse vlan tag from vlan header. flow.c:296: warning: missing initial short description on line: * Parse vlan tag from vlan header. flow.c:537: warning: No description found for return value of 'key_extract_l3l4' flow.c:769: warning: No description found for return value of 'key_extract' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Pravin B Shelar <pshelar@ovn.org> Cc: dev@openvswitch.org Link: https://lore.kernel.org/r/20210808190834.23362-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-27openvswitch: fix sparse warning incorrect typeMark Gray1-1/+1
fix incorrect type in argument 1 (different address spaces) ../net/openvswitch/datapath.c:169:17: warning: incorrect type in argument 1 (different address spaces) ../net/openvswitch/datapath.c:169:17: expected void const * ../net/openvswitch/datapath.c:169:17: got struct dp_nlsk_pids [noderef] __rcu *upcall_portids Found at: https://patchwork.kernel.org/project/netdevbpf/patch/20210630095350.817785-1-mark.d.gray@redhat.com/#24285159 Signed-off-by: Mark Gray <mark.d.gray@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27openvswitch: fix alignment issuesMark Gray2-8/+14
Signed-off-by: Mark Gray <mark.d.gray@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16openvswitch: Introduce per-cpu upcall dispatchMark Gray3-3/+95
The Open vSwitch kernel module uses the upcall mechanism to send packets from kernel space to user space when it misses in the kernel space flow table. The upcall sends packets via a Netlink socket. Currently, a Netlink socket is created for every vport. In this way, there is a 1:1 mapping between a vport and a Netlink socket. When a packet is received by a vport, if it needs to be sent to user space, it is sent via the corresponding Netlink socket. This mechanism, with various iterations of the corresponding user space code, has seen some limitations and issues: * On systems with a large number of vports, there is a correspondingly large number of Netlink sockets which can limit scaling. (https://bugzilla.redhat.com/show_bug.cgi?id=1526306) * Packet reordering on upcalls. (https://bugzilla.redhat.com/show_bug.cgi?id=1844576) * A thundering herd issue. (https://bugzilla.redhat.com/show_bug.cgi?id=1834444) This patch introduces an alternative, feature-negotiated, upcall mode using a per-cpu dispatch rather than a per-vport dispatch. In this mode, the Netlink socket to be used for the upcall is selected based on the CPU of the thread that is executing the upcall. In this way, it resolves the issues above as: a) The number of Netlink sockets scales with the number of CPUs rather than the number of vports. b) Ordering per-flow is maintained as packets are distributed to CPUs based on mechanisms such as RSS and flows are distributed to a single user space thread. c) Packets from a flow can only wake up one user space thread. The corresponding user space code can be found at: https://mail.openvswitch.org/pipermail/ovs-dev/2021-July/385139.html Bugzilla: https://bugzilla.redhat.com/1844576 Signed-off-by: Mark Gray <mark.d.gray@redhat.com> Acked-by: Flavio Leitner <fbl@sysclose.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01openvswitch: Optimize operation for key comparisonBaowen Zheng1-3/+3
In the current implement when comparing two flow keys, we will return result after comparing the whole key from start to end. In our optimization, we will return result in the first none-zero comparison, then we will improve the flow table looking up efficiency. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22openvswitch: add trace pointsAaron Conole5-0/+179
This makes openvswitch module use the event tracing framework to log the upcall interface and action execution pipeline. When using openvswitch as the packet forwarding engine, some types of debugging are made possible simply by using the ovs-vswitchd's ofproto/trace command. However, such a command has some limitations: 1. When trying to trace packets that go through the CT action, the state of the packet can't be determined, and probably would be potentially wrong. 2. Deducing problem packets can sometimes be difficult as well even if many of the flows are known 3. It's possible to use the openvswitch module even without the ovs-vswitchd (although, not common use). Introduce the event tracing points here to make it possible for working through these problems in kernel space. The style is copied from the mac80211 driver-trace / trace code for consistency - this creates some checkpatch splats, but the official 'guide' for adding tracepoints, as well as the existing examples all add the same splats so it seems acceptable. Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+8
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-13openvswitch: meter: fix race when getting now_ms.Tao Liu1-0/+8
We have observed meters working unexpected if traffic is 3+Gbit/s with multiple connections. now_ms is not pretected by meter->lock, we may get a negative long_delta_ms when another cpu updated meter->used, then: delta_ms = (u32)long_delta_ms; which will be a large value. band->bucket += delta_ms * band->rate; then we get a wrong band->bucket. OpenVswitch userspace datapath has fixed the same issue[1] some time ago, and we port the implementation to kernel datapath. [1] https://patchwork.ozlabs.org/project/openvswitch/patch/20191025114436.9746-1-i.maximets@ovn.org/ Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Tao Liu <thomas.liu@ucloud.cn> Suggested-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Ilya Maximets <i.maximets@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-10net: openvswitch: Remove unnecessary skb_nfct()Yejune Deng1-7/+4
There is no need add 'if (skb_nfct(skb))' assignment, the nf_conntrack_put() would check it. Signed-off-by: Yejune Deng <yejunedeng@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29openvswitch: fix stack OOB read while fragmenting IPv4 packetsDavide Caratti1-4/+4
running openvswitch on kernels built with KASAN, it's possible to see the following splat while testing fragmentation of IPv4 packets: BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60 Read of size 1 at addr ffff888112fc713c by task handler2/1367 CPU: 0 PID: 1367 Comm: handler2 Not tainted 5.12.0-rc6+ #418 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 ip_do_fragment+0x1b03/0x1f60 ovs_fragment+0x5bf/0x840 [openvswitch] do_execute_actions+0x1bd5/0x2400 [openvswitch] ovs_execute_actions+0xc8/0x3d0 [openvswitch] ovs_packet_cmd_execute+0xa39/0x1150 [openvswitch] genl_family_rcv_msg_doit.isra.15+0x227/0x2d0 genl_rcv_msg+0x287/0x490 netlink_rcv_skb+0x120/0x380 genl_rcv+0x24/0x40 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f957079db07 Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 eb ec ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 24 ed ff ff 48 RSP: 002b:00007f956ce35a50 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007f957079db07 RDX: 0000000000000000 RSI: 00007f956ce35ae0 RDI: 0000000000000019 RBP: 00007f956ce35ae0 R08: 0000000000000000 R09: 00007f9558006730 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007f956ce37308 R14: 00007f956ce35f80 R15: 00007f956ce35ae0 The buggy address belongs to the page: page:00000000af2a1d93 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x112fc7 flags: 0x17ffffc0000000() raw: 0017ffffc0000000 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected addr ffff888112fc713c is located in stack of task handler2/1367 at offset 180 in frame: ovs_fragment+0x0/0x840 [openvswitch] this frame has 2 objects: [32, 144) 'ovs_dst' [192, 424) 'ovs_rt' Memory state around the buggy address: ffff888112fc7000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888112fc7080: 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 00 00 00 >ffff888112fc7100: 00 00 00 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 ^ ffff888112fc7180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888112fc7200: 00 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00 for IPv4 packets, ovs_fragment() uses a temporary struct dst_entry. Then, in the following call graph: ip_do_fragment() ip_skb_dst_mtu() ip_dst_mtu_maybe_forward() ip_mtu_locked() the pointer to struct dst_entry is used as pointer to struct rtable: this turns the access to struct members like rt_mtu_locked into an OOB read in the stack. Fix this changing the temporary variable used for IPv4 packets in ovs_fragment(), similarly to what is done for IPv6 few lines below. Fixes: d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmt") Cc: <stable@vger.kernel.org> Acked-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+2
2021-04-23openvswitch: meter: remove rate from the bucket size calculationIlya Maximets1-2/+2
Implementation of meters supposed to be a classic token bucket with 2 typical parameters: rate and burst size. Burst size in this schema is the maximum number of bytes/packets that could pass without being rate limited. Recent changes to userspace datapath made meter implementation to be in line with the kernel one, and this uncovered several issues. The main problem is that maximum bucket size for unknown reason accounts not only burst size, but also the numerical value of rate. This creates a lot of confusion around behavior of meters. For example, if rate is configured as 1000 pps and burst size set to 1, this should mean that meter will tolerate bursts of 1 packet at most, i.e. not a single packet above the rate should pass the meter. However, current implementation calculates maximum bucket size as (rate + burst size), so the effective bucket size will be 1001. This means that first 1000 packets will not be rate limited and average rate might be twice as high as the configured rate. This also makes it practically impossible to configure meter that will have burst size lower than the rate, which might be a desirable configuration if the rate is high. Inability to configure low values of a burst size and overall inability for a user to predict what will be a maximum and average rate from the configured parameters of a meter without looking at the OVS and kernel code might be also classified as a security issue, because drop meters are frequently used as a way of protection from DoS attacks. This change removes rate from the calculation of a bucket size, making it in line with the classic token bucket algorithm and essentially making the rate and burst tolerance being predictable from a users' perspective. Same change proposed for the userspace implementation. Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+4
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-05openvswitch: fix send of uninitialized stack memory in ct limit replyIlya Maximets1-4/+4
'struct ovs_zone_limit' has more members than initialized in ovs_ct_limit_get_default_limit(). The rest of the memory is a random kernel stack content that ends up being sent to userspace. Fix that by using designated initializer that will clear all non-specified fields. Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-04net: openvswitch: Use 'skb_push_rcsum()' instead of hand coding itChristophe JAILLET2-8/+5
'skb_push()'/'skb_postpush_rcsum()' can be replaced by an equivalent 'skb_push_rcsum()' which is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-6/+12
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22openvswitch: Fix a typoBhaskar Chowdhury1-1/+1
s/subsytem/subsystem/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16openvswitch: Warn over-mtu packets only if iface is UP.Flavio Leitner1-3/+5
It is not unusual to have the bridge port down. Sometimes it has the old MTU, which is fine since it's not being used. However, the kernel spams the log with a warning message when a packet is going to be sent over such port. Fix that by warning only if the interface is UP. Signed-off-by: Flavio Leitner <fbl@sysclose.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ctwenxu3-6/+12
When openvswitch conntrack offload with act_ct action. The first rule do conntrack in the act_ct in tc subsystem. And miss the next rule in the tc and fallback to the ovs datapath but miss set post_ct flag which will lead the ct_state_key with -trk flag. Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support") Signed-off-by: wenxu <wenxu@ucloud.cn> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-14net: openvswitch: add log message for error caseEelco Chaudron2-9/+17
As requested by upstream OVS, added some error messages in the validate_and_copy_dec_ttl function. Includes a small cleanup, which removes an unnecessary parameter from the dec_ttl_exception_handler() function. Reported-by: Flavio Leitner <fbl@sysclose.org> Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Acked-by: Flavio Leitner <fbl@sysclose.org> Link: https://lore.kernel.org/r/161054576573.26637.18396634650212670580.stgit@ebuild Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14net: openvswitch: fix TTL decrement exception action executionEelco Chaudron1-9/+6
Currently, the exception actions are not processed correctly as the wrong dataset is passed. This change fixes this, including the misleading comment. In addition, a check was added to make sure we work on an IPv4 packet, and not just assume if it's not IPv6 it's IPv4. This was all tested using OVS with patch, https://patchwork.ozlabs.org/project/openvswitch/list/?series=21639, applied and sending packets with a TTL of 1 (and 0), both with IPv4 and IPv6. Fixes: 69929d4c49e1 ("net: openvswitch: fix TTL decrement action netlink message format") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/160733569860.3007.12938188180387116741.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-08net: openvswitch: conntrack: simplify the return expression of ↵Zheng Yongjun1-5/+1
ovs_ct_limit_get_default_limit() Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-04openvswitch: fix error return code in validate_and_copy_dec_ttl()Wang Hai1-1/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Changing 'return start' to 'return action_start' can fix this bug. Fixes: 69929d4c49e1 ("net: openvswitch: fix TTL decrement action netlink message format") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20201204114314.1596-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+3
Conflicts: drivers/net/ethernet/ibm/ibmvnic.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03net: openvswitch: ensure LSE is pullable before reading itDavide Caratti1-0/+3
when openvswitch is configured to mangle the LSE, the current value is read from the packet dereferencing 4 bytes at mpls_hdr(): ensure that the label is contained in the skb "linear" area. Found by code inspection. Fixes: d27cf5c59a12 ("net: core: add MPLS update core helper and use in OvS") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/aa099f245d93218b84b5c056b67b6058ccf81a66.1606987185.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-23/+58
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net: openvswitch: fix TTL decrement action netlink message formatEelco Chaudron2-23/+58
Currently, the openvswitch module is not accepting the correctly formated netlink message for the TTL decrement action. For both setting and getting the dec_ttl action, the actions should be nested in the OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi. When the original patch was sent, it was tested with a private OVS userspace implementation. This implementation was unfortunately not upstreamed and reviewed, hence an erroneous version of this patch was sent out. Leaving the patch as-is would cause problems as the kernel module could interpret additional attributes as actions and vice-versa, due to the actions not being encapsulated/nested within the actual attribute, but being concatinated after it. Fixes: 744676e77720 ("openvswitch: add TTL decrement action") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20net: openvswitch: Be liberal in tcp conntrack.Numan Siddique1-0/+8
There is no easy way to distinguish if a conntracked tcp packet is marked invalid because of tcp_in_window() check error or because it doesn't belong to an existing connection. With this patch, openvswitch sets liberal tcp flag for the established sessions so that out of window packets are not marked invalid. A helper function - nf_ct_set_tcp_be_liberal(nf_conn) is added which sets this flag for both the directions of the nf_conn. Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Numan Siddique <nusiddiq@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20201116130126.3065077-1-nusiddiq@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14net: openvswitch: use core API to update/provide statsLev Stipakov1-22/+7
Commit d3fd65484c781 ("net: core: add dev_sw_netstats_tx_add") has added function "dev_sw_netstats_tx_add()" to update net device per-cpu TX stats. Use this function instead of own code. While on it, remove internal_get_stats() and replace it with dev_get_tstats64(). Signed-off-by: Lev Stipakov <lev@openvpn.net> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20201113215336.145998-1-lev@openvpn.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-8/+8
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03net: openvswitch: silence suspicious RCU usage warningEelco Chaudron2-8/+8
Silence suspicious RCU usage warning in ovs_flow_tbl_masks_cache_resize() by replacing rcu_dereference() with rcu_dereference_ovsl(). In addition, when creating a new datapath, make sure it's configured under the ovs_lock. Fixes: 9bf24f594c6a ("net: openvswitch: make masks cache size configurable") Reported-by: syzbot+9a8f8bfcc56e8578016c@syzkaller.appspotmail.com Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/160439190002.56943.1418882726496275961.stgit@ebuild Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-02openvswitch: Use IS_ERR instead of IS_ERR_OR_NULLYueHaibing1-1/+1
Fix smatch warning: net/openvswitch/meter.c:427 ovs_meter_cmd_set() warn: passing zero to 'PTR_ERR' dp_meter_create() never returns NULL, use IS_ERR instead of IS_ERR_OR_NULL to fix this. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Link: https://lore.kernel.org/r/20201031060153.39912-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30net: openvswitch: Fix kerneldoc warningsAndrew Lunn2-1/+7
net/openvswitch/flow.c:303: warning: Function parameter or member 'key_vh' not described in 'parse_vlan_tag' net/openvswitch/flow.c:303: warning: Function parameter or member 'skb' not described in 'parse_vlan_tag' net/openvswitch/flow.c:303: warning: Function parameter or member 'untag_vlan' not described in 'parse_vlan_tag' net/openvswitch/vport.c:122: warning: Function parameter or member 'parms' not described in 'ovs_vport_alloc' Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201028004849.930094-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>