summaryrefslogtreecommitdiffstats
path: root/net/openvswitch
AgeCommit message (Collapse)AuthorFilesLines
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+1
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31openvswitch: Return vport module ref before destructionThomas Graf1-3/+1
Return module reference before invoking the respective vport ->destroy() function. This is needed as ovs_vport_del() is not invoked inside an RCU read side critical section so the kfree can occur immediately before returning to ovs_vport_del(). Returning the module reference before ->destroy() is safe because the module unregistration is blocked on ovs_lock which we hold while destroying the datapath. Fixes: 62b9c8d0372d ("ovs: Turn vports with dependencies into separate modules") Reported-by: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_get_in_addr and nla_get_in6_addrJiri Benc1-2/+2
Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_put_in_addr and nla_put_in6_addrJiri Benc1-2/+4
IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12net: Introduce possible_net_tEric W. Biederman1-3/+1
Having to say > #ifdef CONFIG_NET_NS > struct net *net; > #endif in structures is a little bit wordy and a little bit error prone. Instead it is possible to say: > typedef struct { > #ifdef CONFIG_NET_NS > struct net *net; > #endif > } possible_net_t; And then in a header say: > possible_net_t net; Which is cleaner and easier to use and easier to test, as the possible_net_t is always there no matter what the compile options. Further this allows read_pnet and write_pnet to be functions in all cases which is better at catching typos. This change adds possible_net_t, updates the definitions of read_pnet and write_pnet, updates optional struct net * variables that write_pnet uses on to have the type possible_net_t, and finally fixes up the b0rked users of read_pnet and write_pnet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12net: Kill hold_net release_netEric W. Biederman1-3/+1
hold_net and release_net were an idea that turned out to be useless. The code has been disabled since 2008. Kill the code it is long past due. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08mpls: Fix the openvswitch select of NET_MPLS_GSOEric W. Biederman1-0/+1
Fix the OPENVSWITCH Kconfig option and old Kconfigs by having OPENVSWITCH select both NET_MPLS_GSO and MPLSO. A Kbuild test robot reported that when NET_MPLS_GSO is selected by OPENVSWITCH the generated .config is broken because MPLS is not selected. Cc: Simon Horman <horms@verge.net.au> Fixes: cec9166ca4e mpls: Refactor how the mpls module is built Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03openvswitch: Fix serialization of non-masked set actions.Joe Stringer1-1/+7
Set actions consist of a regular OVS_KEY_ATTR_* attribute nested inside of a OVS_ACTION_ATTR_SET action attribute. When converting masked actions back to regular set actions, the inner attribute length was not changed, ie, double the length being serialized. This patch fixes the bug. Fixes: 83d2b9b ("net: openvswitch: Support masked set actions.") Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20openvswitch: Fix net exit.Pravin B Shelar2-2/+45
Open vSwitch allows moving internal vport to different namespace while still connected to the bridge. But when namespace deleted OVS does not detach these vports, that results in dangling pointer to netdevice which causes kernel panic as follows. This issue is fixed by detaching all ovs ports from the deleted namespace at net-exit. BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffffa0aadaa5>] ovs_vport_locate+0x35/0x80 [openvswitch] Oops: 0000 [#1] SMP Call Trace: [<ffffffffa0aa6391>] lookup_vport+0x21/0xd0 [openvswitch] [<ffffffffa0aa65f9>] ovs_vport_cmd_get+0x59/0xf0 [openvswitch] [<ffffffff8167e07c>] genl_family_rcv_msg+0x1bc/0x3e0 [<ffffffff8167e319>] genl_rcv_msg+0x79/0xc0 [<ffffffff8167d919>] netlink_rcv_skb+0xb9/0xe0 [<ffffffff8167deac>] genl_rcv+0x2c/0x40 [<ffffffff8167cffd>] netlink_unicast+0x12d/0x1c0 [<ffffffff8167d3da>] netlink_sendmsg+0x34a/0x6b0 [<ffffffff8162e140>] sock_sendmsg+0xa0/0xe0 [<ffffffff8162e5e8>] ___sys_sendmsg+0x408/0x420 [<ffffffff8162f541>] __sys_sendmsg+0x51/0x90 [<ffffffff8162f592>] SyS_sendmsg+0x12/0x20 [<ffffffff81764ee9>] system_call_fastpath+0x12/0x17 Reported-by: Assaf Muller <amuller@redhat.com> Fixes: 46df7b81454("openvswitch: Add support for network namespaces.") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Thomas Graf <tgraf@noironetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-14openvswitch: Fix key serialization.Pravin B Shelar1-1/+1
Fix typo where mask is used rather than key. Fixes: 74ed7ab9264("openvswitch: Add support for unique flow IDs.") Reported-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11openvswitch: Add missing initialization in validate_and_copy_set_tun()Geert Uytterhoeven1-1/+1
net/openvswitch/flow_netlink.c: In function ‘validate_and_copy_set_tun’: net/openvswitch/flow_netlink.c:1749: warning: ‘err’ may be used uninitialized in this function If ipv4_tun_from_nlattr() returns a different positive value than OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS, err will be uninitialized, and validate_and_copy_set_tun() may return an undefined value instead of a zero success indicator. Initialize err to zero to fix this. Fixes: 1dd144cf5b4b47e1 ("openvswitch: Support VXLAN Group Policy extension") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11openvswitch: Reset key metadata for packet execution.Pravin B Shelar1-0/+2
Userspace packet execute command pass down flow key for given packet. But userspace can skip some parameter with zero value. Therefore kernel needs to initialize key metadata to zero. Fixes: 0714812134 ("openvswitch: Eliminate memset() from flow_extract.") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-09openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is setThomas Graf1-1/+1
This avoids setting TUNNEL_VXLAN_OPT for VXLAN frames which don't have any GBP metadata set. It is not invalid to set it but unnecessary. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08openvswitch: Initialize unmasked key and uid lenPravin B Shelar1-0/+2
Flow alloc needs to initialize unmasked key pointer. Otherwise it can crash kernel trying to free random unmasked-key pointer. general protection fault: 0000 [#1] SMP 3.19.0-rc6-net-next+ #457 Hardware name: Supermicro X7DWU/X7DWU, BIOS 1.1 04/30/2008 RIP: 0010:[<ffffffff8111df0e>] [<ffffffff8111df0e>] kfree+0xac/0x196 Call Trace: [<ffffffffa060bd87>] flow_free+0x21/0x59 [openvswitch] [<ffffffffa060bde0>] ovs_flow_free+0x21/0x23 [openvswitch] [<ffffffffa0605b4a>] ovs_packet_cmd_execute+0x2f3/0x35f [openvswitch] [<ffffffffa0605995>] ? ovs_packet_cmd_execute+0x13e/0x35f [openvswitch] [<ffffffff811fe6fb>] ? nla_parse+0x4f/0xec [<ffffffff8139a2fc>] genl_family_rcv_msg+0x26d/0x2c9 [<ffffffff8107620f>] ? __lock_acquire+0x90e/0x9aa [<ffffffff8139a3be>] genl_rcv_msg+0x66/0x89 [<ffffffff8139a358>] ? genl_family_rcv_msg+0x2c9/0x2c9 [<ffffffff81399591>] netlink_rcv_skb+0x3e/0x95 [<ffffffff81399898>] ? genl_rcv+0x18/0x37 [<ffffffff813998a7>] genl_rcv+0x27/0x37 [<ffffffff81399033>] netlink_unicast+0x103/0x191 [<ffffffff81399382>] netlink_sendmsg+0x2c1/0x310 [<ffffffff811007ad>] ? might_fault+0x50/0xa0 [<ffffffff8135c773>] do_sock_sendmsg+0x5f/0x7a [<ffffffff8135c799>] sock_sendmsg+0xb/0xd [<ffffffff8135cacf>] ___sys_sendmsg+0x1a3/0x218 [<ffffffff8113e54b>] ? get_close_on_exec+0x86/0x86 [<ffffffff8115a9d0>] ? fsnotify+0x32c/0x348 [<ffffffff8115a720>] ? fsnotify+0x7c/0x348 [<ffffffff8113e5f5>] ? __fget+0xaa/0xbf [<ffffffff8113e54b>] ? get_close_on_exec+0x86/0x86 [<ffffffff8135cccd>] __sys_sendmsg+0x3d/0x5e [<ffffffff8135cd02>] SyS_sendmsg+0x14/0x16 [<ffffffff81411852>] system_call_fastpath+0x12/0x17 Fixes: 74ed7ab9264("openvswitch: Add support for unique flow IDs.") CC: Joe Stringer <joestringer@nicira.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-07net: openvswitch: Support masked set actions.Jarno Rajahalme2-172/+362
OVS userspace already probes the openvswitch kernel module for OVS_ACTION_ATTR_SET_MASKED support. This patch adds the kernel module implementation of masked set actions. The existing set action sets many fields at once. When only a subset of the IP header fields, for example, should be modified, all the IP fields need to be exact matched so that the other field values can be copied to the set action. A masked set action allows modification of an arbitrary subset of the supported header bits without requiring the rest to be matched. Masked set action is now supported for all writeable key types, except for the tunnel key. The set tunnel action is an exception as any input tunnel info is cleared before action processing starts, so there is no tunnel info to mask. The kernel module converts all (non-tunnel) set actions to masked set actions. This makes action processing more uniform, and results in less branching and duplicating the action processing code. When returning actions to userspace, the fully masked set actions are converted back to normal set actions. We use a kernel internal action code to be able to tell the userspace provided and converted masked set actions apart. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28openvswitch: Add support for checksums on UDP tunnels.Jesse Gross2-3/+6
Currently, it isn't possible to request checksums on the outer UDP header of tunnels - the TUNNEL_CSUM flag is ignored. This adds support for requesting that UDP checksums be computed on transmit and properly reported if they are present on receive. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26openvswitch: Add support for unique flow IDs.Joe Stringer6-91/+415
Previously, flows were manipulated by userspace specifying a full, unmasked flow key. This adds significant burden onto flow serialization/deserialization, particularly when dumping flows. This patch adds an alternative way to refer to flows using a variable-length "unique flow identifier" (UFID). At flow setup time, userspace may specify a UFID for a flow, which is stored with the flow and inserted into a separate table for lookup, in addition to the standard flow table. Flows created using a UFID must be fetched or deleted using the UFID. All flow dump operations may now be made more terse with OVS_UFID_F_* flags. For example, the OVS_UFID_F_OMIT_KEY flag allows responses to omit the flow key from a datapath operation if the flow has a corresponding UFID. This significantly reduces the time spent assembling and transacting netlink messages. With all OVS_UFID_F_OMIT_* flags enabled, the datapath only returns the UFID and statistics for each flow during flow dump, increasing ovs-vswitchd revalidator performance by 40% or more. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26openvswitch: Use sw_flow_key_range for key ranges.Joe Stringer1-11/+9
These minor tidyups make a future patch a little tidier. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26openvswitch: Refactor ovs_flow_tbl_insert().Joe Stringer1-7/+14
Rework so that ovs_flow_tbl_insert() calls flow_{key,mask}_insert(). This tidies up a future patch. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26openvswitch: Refactor ovs_nla_fill_match().Joe Stringer3-40/+46
Refactor the ovs_nla_fill_match() function into separate netlink serialization functions ovs_nla_put_{unmasked_key,mask}(). Modify ovs_nla_put_flow() to handle attribute nesting and expose the 'is_mask' parameter - all callers need to nest the flow, and callers have better knowledge about whether it is serializing a mask or not. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24vxlan: Eliminate dependency on UDP socket in transmit pathTom Herbert1-4/+2
In the vxlan transmit path there is no need to reference the socket for a tunnel which is needed for the receive side. We do, however, need the vxlan_dev flags. This patch eliminate references to the socket in the transmit path, and changes VXLAN_F_UNSHAREABLE to be VXLAN_F_RCV_FLAGS. This mask is used to store the flags applicable to receive (GBP, CSUM6_RX, and REMCSUM_RX) in the vxlan_sock flags. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg1-3/+6
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15openvswitch: Support VXLAN Group Policy extensionThomas Graf4-19/+203
Introduces support for the group policy extension to the VXLAN virtual port. The extension is disabled by default and only enabled if the user has provided the respective configuration. ovs-vsctl add-port br0 vxlan0 -- \ set Interface vxlan0 type=vxlan options:exts=gbp The configuration interface to enable the extension is based on a new attribute OVS_VXLAN_EXT_GBP nested inside OVS_TUNNEL_ATTR_EXTENSION which can carry additional extensions as needed in the future. The group policy metadata is stored as binary blob (struct ovs_vxlan_opts) internally just like Geneve options but transported as nested Netlink attributes to user space. Renames the existing TUNNEL_OPTIONS_PRESENT to TUNNEL_GENEVE_OPT with the binary value kept intact, a new flag TUNNEL_VXLAN_OPT is introduced. The attributes OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS and existing OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS are implemented mutually exclusive. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15openvswitch: Allow for any level of nesting in flow attributesThomas Graf1-50/+56
nlattr_set() is currently hardcoded to two levels of nesting. This change introduces struct ovs_len_tbl to define minimal length requirements plus next level nesting tables to traverse the key attributes to arbitrary depth. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15openvswitch: Rename GENEVE_TUN_OPTS() to TUN_METADATA_OPTS()Thomas Graf3-41/+47
Also factors out Geneve validation code into a new separate function validate_and_copy_geneve_opts(). A subsequent patch will introduce VXLAN options. Rename the existing GENEVE_TUN_OPTS() to reflect its extended purpose of carrying generic tunnel metadata options. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15vxlan: Group Policy extensionThomas Graf1-3/+6
Implements supports for the Group Policy VXLAN extension [0] to provide a lightweight and simple security label mechanism across network peers based on VXLAN. The security context and associated metadata is mapped to/from skb->mark. This allows further mapping to a SELinux context using SECMARK, to implement ACLs directly with nftables, iptables, OVS, tc, etc. The group membership is defined by the lower 16 bits of skb->mark, the upper 16 bits are used for flags. SELinux allows to manage label to secure local resources. However, distributed applications require ACLs to implemented across hosts. This is typically achieved by matching on L2-L4 fields to identify the original sending host and process on the receiver. On top of that, netlabel and specifically CIPSO [1] allow to map security contexts to universal labels. However, netlabel and CIPSO are relatively complex. This patch provides a lightweight alternative for overlay network environments with a trusted underlay. No additional control protocol is required. Host 1: Host 2: Group A Group B Group B Group A +-----+ +-------------+ +-------+ +-----+ | lxc | | SELinux CTX | | httpd | | VM | +--+--+ +--+----------+ +---+---+ +--+--+ \---+---/ \----+---/ | | +---+---+ +---+---+ | vxlan | | vxlan | +---+---+ +---+---+ +------------------------------+ Backwards compatibility: A VXLAN-GBP socket can receive standard VXLAN frames and will assign the default group 0x0000 to such frames. A Linux VXLAN socket will drop VXLAN-GBP frames. The extension is therefore disabled by default and needs to be specifically enabled: ip link add [...] type vxlan [...] gbp In a mixed environment with VXLAN and VXLAN-GBP sockets, the GBP socket must run on a separate port number. Examples: iptables: host1# iptables -I OUTPUT -m owner --uid-owner 101 -j MARK --set-mark 0x200 host2# iptables -I INPUT -m mark --mark 0x200 -j DROP OVS: # ovs-ofctl add-flow br0 'in_port=1,actions=load:0x200->NXM_NX_TUN_GBP_ID[],NORMAL' # ovs-ofctl add-flow br0 'in_port=2,tun_gbp_id=0x200,actions=drop' [0] https://tools.ietf.org/html/draft-smith-vxlan-group-policy [1] http://lwn.net/Articles/204905/ Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14openvswitch: packet messages need their own probe attribtueThomas Graf1-1/+2
User space is currently sending a OVS_FLOW_ATTR_PROBE for both flow and packet messages. This leads to an out-of-bounds access in ovs_packet_cmd_execute() because OVS_FLOW_ATTR_PROBE > OVS_PACKET_ATTR_MAX. Introduce a new OVS_PACKET_ATTR_PROBE with the same numeric value as OVS_FLOW_ATTR_PROBE to grow the range of accepted packet attributes while maintaining to be binary compatible with existing OVS binaries. Fixes: 05da589 ("openvswitch: Add support for OVS_FLOW_ATTR_PROBE.") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Tracked-down-by: Florian Westphal <fw@strlen.de> Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14openvswitch: Introduce ovs_tunnel_route_lookupFan Du5-39/+25
Introduce ovs_tunnel_route_lookup to consolidate route lookup shared by vxlan, gre, and geneve ports. Signed-off-by: Fan Du <fan.du@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko5-7/+8
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13openvswitch: Remove unnecessary version.h inclusionSyam Sidhardhan1-2/+0
version.h inclusion is not necessary as detected by versioncheck. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02openvswitch: Consistently include VLAN header in flow and port stats.Ben Pfaff2-3/+4
Until now, when VLAN acceleration was in use, the bytes of the VLAN header were not included in port or flow byte counters. They were however included when VLAN acceleration was not used. This commit corrects the inconsistency, by always including the VLAN header in byte counters. Previous discussion at http://openvswitch.org/pipermail/dev/2014-December/049521.html Reported-by: Motonori Shindo <mshindo@vmware.com> Signed-off-by: Ben Pfaff <blp@nicira.com> Reviewed-by: Flavio Leitner <fbl@sysclose.org> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-27genetlink: pass only network namespace to genl_has_listeners()Johannes Berg1-2/+1
There's no point to force the caller to know about the internal genl_sock to use inside struct net, just have them pass the network namespace. This doesn't really change code generation since it's an inline, but makes the caller less magic - there's never any reason to pass another socket. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-24openvswitch: fix odd_ptr_err.cocci warningsWu Fengguang1-1/+1
net/openvswitch/vport-gre.c:188:5-11: inconsistent IS_ERR and PTR_ERR, PTR_ERR on line 189 PTR_ERR should access the value just tested by IS_ERR Semantic patch information: There can be false positives in the patch case, where it is the call IS_ERR that is wrong. Generated by: scripts/coccinelle/tests/odd_ptr_err.cocci CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-23openvswitch: Fix vport_send double freePravin B Shelar4-10/+18
Today vport-send has complex error handling because it involves freeing skb and updating stats depending on return value from vport send implementation. This can be simplified by delegating responsibility of freeing skb to the vport implementation for all cases. So that vport-send needs just update stats. Fixes: 91b7514cdf ("openvswitch: Unify vport error stats handling") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-23openvswitch: Fix GSO with multiple MPLS label.Pravin B Shelar1-1/+2
MPLS GSO needs to know inner most protocol to process GSO packets. Fixes: 25cd9ba0abc ("openvswitch: Add basic MPLS support to kernel"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-23openvswitch: Fix MPLS action validation.Pravin B Shelar1-12/+1
Linux stack does not implement GSO for packet with multiple encapsulations. Therefore there was check in MPLS action validation to detect such case, But this check introduced bug which deleted one or more actions from actions list. Following patch removes this check to fix the validation. Fixes: 25cd9ba0abc ("openvswitch: Add basic MPLS support to kernel"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reported-by: Srinivas Neginhal <sneginha@vmware.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Conflicts: drivers/net/ethernet/amd/xgbe/xgbe-desc.c drivers/net/ethernet/renesas/sh_eth.c Overlapping changes in both conflict cases. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10net: replace remaining users of arch_fast_hash with jhashDaniel Borkmann1-2/+2
This patch effectively reverts commit 500f80872645 ("net: ovs: use CRC32 accelerated flow hash if available"), and other remaining arch_fast_hash() users such as from nfsd via commit 6282cd565553 ("NFSD: Don't hand out delegations for 30 seconds after recalling them.") where it has been used as a hash function for bloom filtering. While we think that these users are actually not much of concern, it has been requested to remove the arch_fast_hash() library bits that arose from [1] entirely as per recent discussion [2]. The main argument is that using it as a hash may introduce bias due to its linearity (see avalanche criterion) and thus makes it less clear (though we tried to document that) when this security/performance trade-off is actually acceptable for a general purpose library function. Lets therefore avoid any further confusion on this matter and remove it to prevent any future accidental misuse of it. For the time being, this is going to make hashing of flow keys a bit more expensive in the ovs case, but future work could reevaluate a different hashing discipline. [1] https://patchwork.ozlabs.org/patch/299369/ [2] https://patchwork.ozlabs.org/patch/418756/ Cc: Neil Brown <neilb@suse.de> Cc: Francesco Fusco <fusco@ntop.org> Cc: Jesse Gross <jesse@nicira.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09openvswitch: set correct protocol on route lookupJiri Benc1-1/+1
Respect what the caller passed to ovs_tunnel_get_egress_info. Fixes: 8f0aad6f35f7e ("openvswitch: Extend packet attribute for egress tunnel info") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-05openvswitch: Fix flow mask validation.Pravin B Shelar1-2/+2
Following patch fixes typo in the flow validation. This prevented installation of ARP and IPv6 flows. Fixes: 19e7a3df72 ("openvswitch: Fix NDP flow mask validation") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-12/+21
Conflicts: drivers/net/ieee802154/fakehard.c A bug fix went into 'net' for ieee802154/fakehard.c, which is removed in 'net-next'. Add build fix into the merge from Stephen Rothwell in openvswitch, the logging macros take a new initial 'log' argument, a new call was added in 'net' so when we merge that in here we have to explicitly add the new 'log' arg to it else the build fails. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: move vlan pop/push functions into common codeJiri Pirko1-77/+9
So it can be used from out of openvswitch code. Did couple of cosmetic changes on the way, namely variable naming and adding support for 8021AD proto. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: move make_writable helper into common codeJiri Pirko1-25/+14
note that skb_make_writable already exists in net/netfilter/core.c but does something slightly different. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: introduce *vlan_hwaccel_push_inside helpersJiri Pirko2-11/+5
Use them to push skb->vlan_tci into the payload and avoid code duplication. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: rename __vlan_put_tag to vlan_insert_tag_set_protoJiri Pirko3-5/+8
Name fits better. Plus there's going to be introduced __vlan_insert_tag later on. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21openvswitch: actions: use skb_postpull_rcsum when possibleJiri Pirko1-7/+2
Replace duplicated code by calling skb_postpull_rcsum Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20openvswitch: Don't validate IPv6 label masks.Joe Stringer1-1/+1
When userspace doesn't provide a mask, OVS datapath generates a fully unwildcarded mask for the flow by copying the flow and setting all bits in all fields. For IPv6 label, this creates a mask that matches on the upper 12 bits, causing the following error: openvswitch: netlink: Invalid IPv6 flow label value (value=ffffffff, max=fffff) This patch ignores the label validation check for masks, avoiding this error. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16openvswitch: use PTR_ERR_OR_ZEROFabian Frederick1-3/+1
Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-14openvswitch: Validate IPv6 flow key and mask values.Jarno Rajahalme1-0/+7
Reject flow label key and mask values with invalid bits set. Introduced by commit 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action"). Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-05 00:08:18 +0000