summaryrefslogtreecommitdiffstats
path: root/net/nfc
AgeCommit message (Collapse)AuthorFilesLines
2016-05-04nfc: nci: Add nci_nfcc_loopback to the nci coreChristophe Ricard1-0/+77
For test purpose, provide the generic nci loopback function. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-05-04nfc: nci: Add an additional parameter to identify a connection idChristophe Ricard3-11/+36
According to NCI specification, destination type and destination specific parameters shall uniquely identify a single destination for the Logical Connection. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-05-04nfc: nci: Fix nci_core_conn_closeChristophe Ricard2-1/+3
nci_core_conn_close was not retrieving a conn_info using the correct connection id. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-05-04nfc: nci: Fix nci_core_conn_create to allowing empty destinationChristophe Ricard1-9/+9
NCI_CORE_CONN_CREATE may not have any destination type parameter. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-2/+8
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-02-25NFC: Close a race condition in llcp_sock_getname()Cong Wang1-0/+6
llcp_sock_getname() checks llcp_sock->dev to make sure llcp_sock is already connected or bound, however, we could be in the middle of llcp_sock_bind() where llcp_sock->dev is bound and llcp_sock->service_name_len is set, but llcp_sock->service_name is not, in this case we would lead to copy some bytes from a NULL pointer. Just lock the sock since this is not a hot path anyway. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-02-25NFC: Use GFP_USER for user-controlled kmallocCong Wang1-2/+2
These two functions are called in sendmsg path, and the 'len' is passed from user-space, so we should not allow malicious users to OOM kernel on purpose. Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-01-27NFC: nci: Remove dead codePeter Hurley1-8/+1
The N_NCI ldisc does not define a flush_buffer() ldisc method, so the check when opening the ldisc is always false. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-04Merge tag 'nfc-next-4.5-1' of ↵David S. Miller6-5/+57
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.5 pull request This is the first NFC pull request for 4.5 and it brings: - A new driver for the STMicroelectronics ST95HF NFC chipset. The ST95HF is an NFC digital transceiver with an embedded analog front-end and as such relies on the Linux NFC digital implementation. This is the 3rd user of the NFC digital stack. - ACPI support for the ST st-nci and st21nfca drivers. - A small improvement for the nfcsim driver, as we can now tune the Rx delay through sysfs. - A bunch of minor cleanups and small fixes from Christophe Ricard, for a few drivers and the NFC core code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-29NFC: nci: memory leak in nci_core_conn_create()Dan Carpenter1-3/+3
I've moved the check for "number_destination_params" forward a few lines to avoid leaking "cmd". Fixes: caa575a86ec1 ('NFC: nci: fix possible crash in nci_core_conn_create') Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: netlink: HCI event connectivity implementationChristophe Ricard3-0/+51
Add support for missing HCI event EVT_CONNECTIVITY and forward it to userspace. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29NFC: nci: Fix error check of nci_hci_create_pipe() resultChristophe Ricard1-1/+1
net/nfc/nci/hci.c: In function nci_hci_connect_gate : net/nfc/nci/hci.c:679: warning: comparison is always false due to limited range of data type In case of error, nci_hci_create_pipe() returns NCI_HCI_INVALID_PIPE, and not a negative error code. Correct the check to fix this. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29NFC: digital: Add Type4A tags supportShikha Singh1-1/+2
The definition of DIGITAL_PROTO_NFCA_RF_TECH is modified to support ISO14443 Type4A tags. Without this change it is not possible to start polling for ISO14443 Type4A tags from the initiator side. Signed-off-by: Shikha Singh <shikha.singh@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-01net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATAEric Dumazet1-1/+1
This patch is a cleanup to make following patch easier to review. Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA from (struct socket)->flags to a (struct socket_wq)->flags to benefit from RCU protection in sock_wake_async() To ease backports, we rename both constants. Two new helpers, sk_set_bit(int nr, struct sock *sk) and sk_clear_bit(int net, struct sock *sk) are added so that following patch can change their implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28NFC: nci: non-static functions can not be inlineRobert Dolca1-8/+8
This fixes a build error that seems to be toochain dependent (Not seen with gcc v5.1): In file included from net/nfc/nci/rsp.c:36:0: net/nfc/nci/rsp.c: In function ‘nci_rsp_packet’: include/net/nfc/nci_core.h:355:12: error: inlining failed in call to always_inline ‘nci_prop_rsp_packet’: function body not available inline int nci_prop_rsp_packet(struct nci_dev *ndev, __u16 opcode, Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: allow spi driver to choose transfer clockVincent Cuissard1-1/+6
In some cases low level drivers might want to update the SPI transfer clock (e.g. during firmware download). This patch adds this support. Without any modification the driver will use the default SPI clock (from pdata or device tree). Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: move generic spi driver to a moduleVincent Cuissard3-2/+7
SPI driver should be a module. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: export nci_send_frame and nci_send_cmd functionVincent Cuissard1-1/+3
Export nci_send_frame and nci_send_cmd symbols to allow drivers to use it. This is needed for example if NCI is used during firmware download phase. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Add support for proprietary commandsChristophe Ricard1-0/+2
Add support for proprietary commands useful mainly for factory testings. Here is a list: - FACTORY_MODE: Allow to set the driver into a mode where no secure element are activated. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example RF trimmings or low level drivers configurations (I2C, SPI, SWP). - HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing table following RF technology, CLF mode or protocol. - HCI_DM_GET_INFO: Allow to retrieve CLF information. - HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low level drivers configurations or RF trimmings. - HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete packet can be more than 8KB. - HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF configuration changes without CLF power off. - HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the white list). - HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF technology. When using this command to anti-collision is done. - HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Add few code style fixesChristophe Ricard1-1/+1
Add some few code style fixes. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: netlink: Add mode parameter to deactivate_target functionsChristophe Ricard7-11/+24
In order to manage in a better way the nci poll mode state machine, add mode parameter to deactivate_target functions. This way we can manage different target state. mode parameter make sense only in nci core. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Create pipe on specific gate in nci_hci_connect_gateChristophe Ricard1-1/+55
Some gates might need to have their pipes explicitly created. Add a call to nci_hci_create_pipe in nci_hci_connect_gate for every gate that is different than NCI_HCI_LINK_MGMT_GATE or NCI_HCI_ADMIN_GATE. In case of an error when opening a pipe, like in hci layer, delete the pipe if it was created. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Call nci_hci_clear_all_pipes at HCI initial activation.Christophe Ricard1-0/+4
When session_id is filled to 0xff, the pipe configuration is probably incorrect and needs to be cleared. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: add nci_hci_clear_all_pipes functionsChristophe Ricard1-0/+15
nci_hci_clear_all_pipes might be use full in some cases for example after a firmware update. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: extract pipe value using NCI_HCP_MSG_GET_PIPEChristophe Ricard1-2/+2
When receiving data in nci_hci_msg_rx_work, extract pipe value using NCI_HCP_MSG_GET_PIPE macro. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Fix improper management of HCI return codeChristophe Ricard1-17/+49
When sending HCI data over NCI, HCI return code is part of the NCI data. In order to get correctly the HCI return code, we assume the NCI communication is successful and extract the return code for the nci_hci functions return code. This is done because nci_to_errno does not match hci return code value. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Fix incorrect data chaining when sending dataChristophe Ricard1-7/+13
When sending HCI data over NCI, cmd information should be present only on the first packet. Each packet shall be specifically allocated and sent to the NCI layer. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: add nci_get_conn_info_by_id functionRobert Dolca1-0/+13
This functin takes as a parameter a pointer to the nci_dev struct and the first byte from the values of the first domain specific parameter that was used for the connection creation. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: fix possible crash in nci_core_conn_createRobert Dolca1-1/+8
If the number of destination speific parameters supplied is 0 the call will fail. If the first destination specific parameter does not have a value, curr_id will be set to 0. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: rename nci_prop_ops to nci_driver_opsRobert Dolca1-8/+8
Initially it was used to create hooks in the driver for proprietary operations. Currently it is being used for hooks for both proprietary and generic operations. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Allow the driver to set handler for core nci opsRobert Dolca3-21/+54
The driver may be required to act when some responses or notifications arrive. For example the NCI core does not have a handler for NCI_OP_CORE_GET_CONFIG_RSP. The NFCC can send a config response that has to be read by the driver and the packet may contain vendor specific data. The Fields Peak driver needs to take certain actions when a reset notification arrives (packet also not handled by the nfc core). The driver handlers do not interfere with the core and they are called after the core processes the packet. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Introduce nci_core_cmdRobert Dolca1-5/+19
This allows sending core commands from the driver. The driver should be able to send NCI core commands like CORE_GET_CONFIG_CMD. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Do not call post_setup when setup failsRobert Dolca1-2/+1
The driver should know that it can continue with post setup where setup left off. Being able to execute post_setup when setup fails may force the developer to keep this state in the driver. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Add function to get max packet size for connRobert Dolca1-0/+12
FDP driver needs to send the firmware as regular packets (not fragmented). The driver should have a way to get the max packet size for a given connection. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Export nci data send APIRobert Dolca1-0/+1
For the firmware update the driver may use nci_send_data. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-19NFC: delete null dereferenceJulia Lawall1-4/+2
The exit label performs device_unlock(&dev->dev);, which will fail when dev is NULL, and nfc_put_device(dev);, which is not useful when dev is NULL, so just exit the function immediately. Problem found using scripts/coccinelle/null/deref_null.cocci Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-03NFC: nci: Use __nci_request for exported routinesSamuel Ortiz1-5/+6
Since we do not know in which context drivers will call these routines, they should use the unlocked version of nci_request, i.e. __nci_request. It is up to drivers to know/decide if they need to take the req_lock mutex before calling those routines. When being called from the NCI setup routine there is no need to do so as ops->setup is called under req_lock. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20nfc: netlink: Add capability to reply to vendor_cmd with dataChristophe Ricard1-2/+84
A proprietary vendor command may send back useful data to the user application. For example, the field level applied on the NFC router antenna. Still based on net/wireless/nl80211.c implementation, add nfc_vendor_cmd_alloc_reply_skb and nfc_vendor_cmd_reply in order to send back over netlink data generated by a proprietary command. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20nfc: nci: hci: Add check on skb nci_hci_send_cmd parameterChristophe Ricard1-1/+1
skb can be NULL and may lead to a NULL pointer error. Add a check condition before setting HCI rx buffer. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: export nci_core_reset and nci_core_initRobert Baldyga1-0/+14
Some drivers needs to have ability to reinit NCI core, for example after updating firmware in setup() of post_setup() callback. This patch makes nci_core_reset() and nci_core_init() functions public, to make it possible. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: Add post_setup handlerRobert Baldyga1-0/+4
Some drivers require non-standard configuration after NCI_CORE_INIT request, because they need to know ndev->manufact_specific_info or ndev->manufact_id. This patch adds post_setup handler allowing to do such custom configuration. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-17nfc: netlink: Warning fixChristophe Ricard1-0/+1
When NFC_ATTR_VENDOR_DATA is not set, data_len is 0 and data is NULL. Fixes the following warning: net/nfc/netlink.c:1536:3: warning: 'data' may be used uninitialized +in this function [-Wmaybe-uninitialized] return cmd->doit(dev, data, data_len); Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-17nfc: netlink: Add check on NFC_ATTR_VENDOR_DATAChristophe Ricard1-2/+2
NFC_ATTR_VENDOR_DATA is an optional vendor_cmd argument. The current code was potentially using a non existing argument leading to potential catastrophic results. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-15NFC: nci: fix mistake in uart generic driverVincent Cuissard1-1/+1
It was not possible to register a UART driver due to a bad condition. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-13NFC: nci: remove current SLEEP mode managementVincent Cuissard1-1/+1
NCI deactivate management was modified to support all NCI deactivation type. Problem is that all the API are not ready yet for it. Problem is that with current code, when neard asks to deactivate the tag it sends a deactivate SLEEP but nobody will then send a IDLE deactivate. This IDLE deactivate is mandatory since NFC controller can only be unlocked by DH. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-11NFC: nfcmrvl: add UART driverVincent Cuissard1-1/+0
Add support of Marvell NFC chip controlled over UART Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-11NFC: nci: add generic uart supportVincent Cuissard3-0/+505
Some NFC controller supports UART as host interface. As with SPI, a lot of code can be shared between vendor drivers. This patch add the generic support of UART and provides some extension API for vendor specific needs. This code is strongly inspired by the Bluetooth HCI ldisc implementation. NCI UART vendor drivers will have to register themselves to this layer via nci_uart_register. Underlying tty will have to be configured from user land thanks to an ioctl. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-10NFC: nci: Export nci_req_completeSamuel Ortiz1-0/+1
Drivers implementing proprietary ops may need it now. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: netlink: Implement vendor command supportSamuel Ortiz1-0/+55
Vendor commands are passed from userspace through the NFC_CMD_VENDOR netlink command, allowing driver and hardware specific operations implementations like for example RF tuning or production line calibration. Drivers will associate a set of vendor commands to a vendor id, which could typically be an OUI. The netlink kernel implementation will try to match the received vendor id and sub command attributes with the registered ones. When such match is found, the driver defined sub command routine is called. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Move close ops call in nci_close_deviceChristophe Ricard1-4/+6
When closing the device some data (proprietary commands) might be sent. The core state machine needs to be set for correct command execution. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 08:25:29 +0000