summaryrefslogtreecommitdiffstats
path: root/net/netlink
AgeCommit message (Collapse)AuthorFilesLines
2018-02-08netlink: ensure to loop over all netns in genlmsg_multicast_allns()Nicolas Dichtel1-2/+10
Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the case when commit 134e63756d5f was pushed. However, there was no reason to stop the loop if a netns does not have listeners. Returns -ESRCH only if there was no listeners in all netns. To avoid having the same problem in the future, I didn't take the assumption that nlmsg_multicast() returns only 0 or -ESRCH. Fixes: 134e63756d5f ("genetlink: make netns aware") CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The BPF verifier conflict was some minor contextual issue. The TUN conflict was less trivial. Cong Wang fixed a memory leak of tfile->tx_array in 'net'. This is an skb_array. But meanwhile in net-next tun changed tfile->tx_arry into tfile->tx_ring which is a ptr_ring. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18netlink: reset extack earlier in netlink_rcv_skbXin Long1-1/+1
Move up the extack reset/initialization in netlink_rcv_skb, so that those 'goto ack' will not skip it. Otherwise, later on netlink_ack may use the uninitialized extack and cause kernel crash. Fixes: cbbdf8433a5f ("netlink: extack needs to be reset each time through loop") Reported-by: syzbot+03bee3680a37466775e7@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Overlapping changes all over. The mini-qdisc bits were a little bit tricky, however. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: delete /proc THIS_MODULE referencesAlexey Dobriyan1-1/+0
/proc has been ignoring struct file_operations::owner field for 10 years. Specifically, it started with commit 786d7e1612f0b0adb6046f19b906609e4fe8b1ba ("Fix rmmod/read/write races in /proc entries"). Notice the chunk where inode->i_fop is initialized with proxy struct file_operations for regular files: - if (de->proc_fops) - inode->i_fop = de->proc_fops; + if (de->proc_fops) { + if (S_ISREG(inode->i_mode)) + inode->i_fop = &proc_reg_file_ops; + else + inode->i_fop = de->proc_fops; + } VFS stopped pinning module at this point. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15netlink: extack needs to be reset each time through loopDavid Ahern1-1/+2
syzbot triggered the WARN_ON in netlink_ack testing the bad_attr value. The problem is that netlink_rcv_skb loops over the skb repeatedly invoking the callback and without resetting the extack leaving potentially stale data. Initializing each time through avoids the WARN_ON. Fixes: 2d4bc93368f5a ("netlink: extended ACK reporting") Reported-by: syzbot+315fa6766d0f7c359327@syzkaller.appspotmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
Three sets of overlapping changes, two in the packet scheduler and one in the meson-gxl PHY driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11netlink: Add netns check on tapsKevin Cernekee1-0/+3
Currently, a nlmon link inside a child namespace can observe systemwide netlink activity. Filter the traffic so that nlmon can only sniff netlink messages from its own netns. Test case: vpnns -- bash -c "ip link add nlmon0 type nlmon; \ ip link set nlmon0 up; \ tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" & sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \ spi 0x1 mode transport \ auth sha1 0x6162633132330000000000000000000000000000 \ enc aes 0x00000000000000000000000000000000 grep --binary abc123 /tmp/nlmon.pcap Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11netlink: convert netlink tap spinlock to mutexCong Wang1-6/+6
Both netlink_add_tap() and netlink_remove_tap() are called in process context, no need to bother spinlock. Note, in fact, currently we always hold RTNL when calling these two functions, so we don't need any other lock at all, but keeping this lock doesn't harm anything. Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11netlink: make netlink tap per netnsCong Wang1-17/+49
nlmon device is not supposed to capture netlink events from other netns, so instead of filtering events, we can simply make netlink tap itself per netns. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11rhashtable: Change rhashtable_walk_start to return voidTom Herbert2-8/+5
Most callers of rhashtable_walk_start don't care about a resize event which is indicated by a return value of -EAGAIN. So calls to rhashtable_walk_start are wrapped wih code to ignore -EAGAIN. Something like this is common: ret = rhashtable_walk_start(rhiter); if (ret && ret != -EAGAIN) goto out; Since zero and -EAGAIN are the only possible return values from the function this check is pointless. The condition never evaluates to true. This patch changes rhashtable_walk_start to return void. This simplifies code for the callers that ignore -EAGAIN. For the few cases where the caller cares about the resize event, particularly where the table can be walked in mulitple parts for netlink or seq file dump, the function rhashtable_walk_start_check has been added that returns -EAGAIN on a resize event. Signed-off-by: Tom Herbert <tom@quantonium.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14netlink: remove unnecessary forward declarationJohannes Berg1-1/+0
netlink_skb_destructor() is actually defined before the first usage in the file, so remove the unnecessary forward declaration. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13af_netlink: ensure that NLMSG_DONE never fails in dumpsJason A. Donenfeld2-6/+12
The way people generally use netlink_dump is that they fill in the skb as much as possible, breaking when nla_put returns an error. Then, they get called again and start filling out the next skb, and again, and so forth. The mechanism at work here is the ability for the iterative dumping function to detect when the skb is filled up and not fill it past the brim, waiting for a fresh skb for the rest of the data. However, if the attributes are small and nicely packed, it is possible that a dump callback function successfully fills in attributes until the skb is of size 4080 (libmnl's default page-sized receive buffer size). The dump function completes, satisfied, and then, if it happens to be that this is actually the last skb, and no further ones are to be sent, then netlink_dump will add on the NLMSG_DONE part: nlh = nlmsg_put_answer(skb, cb, NLMSG_DONE, sizeof(len), NLM_F_MULTI); It is very important that netlink_dump does this, of course. However, in this example, that call to nlmsg_put_answer will fail, because the previous filling by the dump function did not leave it enough room. And how could it possibly have done so? All of the nla_put variety of functions simply check to see if the skb has enough tailroom, independent of the context it is in. In order to keep the important assumptions of all netlink dump users, it is therefore important to give them an skb that has this end part of the tail already reserved, so that the call to nlmsg_put_answer does not fail. Otherwise, library authors are forced to find some bizarre sized receive buffer that has a large modulo relative to the common sizes of messages received, which is ugly and buggy. This patch thus saves the NLMSG_DONE for an additional message, for the case that things are dangerously close to the brim. This requires keeping track of the errno from ->dump() across calls. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-0/+2
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01netlink: Allow ext_ack to carry non-error messagesDavid Ahern1-9/+9
The NLMSGERR API already carries data (eg, a cookie) on the success path. Allow a message string to be returned as well. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+4
There were quite a few overlapping sets of changes here. Daniel's bug fix for off-by-ones in the new BPF branch instructions, along with the added allowances for "data_end > ptr + x" forms collided with the metadata additions. Along with those three changes came veritifer test cases, which in their final form I tried to group together properly. If I had just trimmed GIT's conflict tags as-is, this would have split up the meta tests unnecessarily. In the socketmap code, a set of preemption disabling changes overlapped with the rename of bpf_compute_data_end() to bpf_compute_data_pointers(). Changes were made to the mv88e6060.c driver set addr method which got removed in net-next. The hyperv transport socket layer had a locking change in 'net' which overlapped with a change of socket state macro usage in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18netlink: fix netlink_ack() extack raceJohannes Berg1-4/+4
It seems that it's possible to toggle NETLINK_F_EXT_ACK through setsockopt() while another thread/CPU is building a message inside netlink_ack(), which could then trigger the WARN_ON()s I added since if it goes from being turned off to being turned on between allocating and filling the message, the skb could end up being too small. Avoid this whole situation by storing the value of this flag in a separate variable and using that throughout the function instead. Fixes: 2d4bc93368f5 ("netlink: extended ACK reporting") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18netlink: use NETLINK_CB(in_skb).sk instead of looking it upJohannes Berg1-10/+2
When netlink_ack() reports an allocation error to the sending socket, there's no need to look up the sending socket since it's available in the SKB's CB. Use that instead of going to the trouble of looking it up. Note that the pointer is only available since Eric Biederman's commit 3fbc290540a1 ("netlink: Make the sending netlink socket availabe in NETLINK_CB") which is far newer than the original lookup code (Oct 2003) (though the field was called 'ssk' in that commit and only got renamed to 'sk' later, I'd actually argue 'ssk' was better - or perhaps it should've been 'source_sk' - since there are so many different 'sk's involved.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09netlink: do not set cb_running if dump's start() errsJason A. Donenfeld1-6/+7
It turns out that multiple places can call netlink_dump(), which means it's still possible to dereference partially initialized values in dump() that were the result of a faulty returned start(). This fixes the issue by calling start() _before_ setting cb_running to true, so that there's no chance at all of hitting the dump() function through any indirect paths. It also moves the call to start() to be when the mutex is held. This has the nice side effect of serializing invocations to start(), which is likely desirable anyway. It also prevents any possible other races that might come out of this logic. In testing this with several different pieces of tricky code to trigger these issues, this commit fixes all avenues that I'm aware of. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-30netlink: do not proceed if dump's start() errsJason A. Donenfeld1-2/+5
Drivers that use the start method for netlink dumping rely on dumpit not being called if start fails. For example, ila_xlat.c allocates memory and assigns it to cb->args[0] in its start() function. It might fail to do that and return -ENOMEM instead. However, even when returning an error, dumpit will be called, which, in the example above, quickly dereferences the memory in cb->args[0], which will OOPS the kernel. This is but one example of how this goes wrong. Since start() has always been a function with an int return type, it therefore makes sense to use it properly, rather than ignoring it. This patch thus returns early and does not call dumpit() when start() fails. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-06netlink: access nlk groups safely in netlink bind and getnameXin Long1-4/+12
Now there is no lock protecting nlk ngroups/groups' accessing in netlink bind and getname. It's safe from nlk groups' setting in netlink_release, but not from netlink_realloc_groups called by netlink_setsockopt. netlink_lock_table is needed in both netlink bind and getname when accessing nlk groups. Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-06netlink: fix an use-after-free issue for nlk groupsXin Long1-3/+3
ChunYu found a netlink use-after-free issue by syzkaller: [28448.842981] BUG: KASAN: use-after-free in __nla_put+0x37/0x40 at addr ffff8807185e2378 [28448.969918] Call Trace: [...] [28449.117207] __nla_put+0x37/0x40 [28449.132027] nla_put+0xf5/0x130 [28449.146261] sk_diag_fill.isra.4.constprop.5+0x5a0/0x750 [netlink_diag] [28449.176608] __netlink_diag_dump+0x25a/0x700 [netlink_diag] [28449.202215] netlink_diag_dump+0x176/0x240 [netlink_diag] [28449.226834] netlink_dump+0x488/0xbb0 [28449.298014] __netlink_dump_start+0x4e8/0x760 [28449.317924] netlink_diag_handler_dump+0x261/0x340 [netlink_diag] [28449.413414] sock_diag_rcv_msg+0x207/0x390 [28449.432409] netlink_rcv_skb+0x149/0x380 [28449.467647] sock_diag_rcv+0x2d/0x40 [28449.484362] netlink_unicast+0x562/0x7b0 [28449.564790] netlink_sendmsg+0xaa8/0xe60 [28449.661510] sock_sendmsg+0xcf/0x110 [28449.865631] __sys_sendmsg+0xf3/0x240 [28450.000964] SyS_sendmsg+0x32/0x50 [28450.016969] do_syscall_64+0x25c/0x6c0 [28450.154439] entry_SYSCALL64_slow_path+0x25/0x25 It was caused by no protection between nlk groups' free in netlink_release and nlk groups' accessing in sk_diag_dump_groups. The similar issue also exists in netlink_seq_show(). This patch is to defer nlk groups' free in deferred_put_nlk_sk. Reported-by: ChunYu Wang <chunwang@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sock.sk_refcnt from atomic_t to refcount_tReshetova, Elena1-3/+3
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. This patch uses refcount_inc_not_zero() instead of atomic_inc_not_zero_hint() due to absense of a _hint() version of refcount API. If the hint() version must be used, we might need to revisit API. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sock.sk_wmem_alloc from atomic_t to refcount_tReshetova, Elena1-1/+1
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sk_buff.users from atomic_t to refcount_tReshetova, Elena1-3/+3
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg1-1/+1
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg1-1/+1
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01netlink: don't send unknown nsidNicolas Dichtel1-1/+3
The NETLINK_F_LISTEN_ALL_NSID otion enables to listen all netns that have a nsid assigned into the netns where the netlink socket is opened. The nsid is sent as metadata to userland, but the existence of this nsid is checked only for netns that are different from the socket netns. Thus, if no nsid is assigned to the socket netns, NETNSA_NSID_NOT_ASSIGNED is reported to the userland. This value is confusing and useless. After this patch, only valid nsid are sent to userland. Reported-by: Flavio Leitner <fbl@sysclose.org> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct where availableJohannes Berg1-1/+1
This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg1-1/+1
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: allow sending extended ACK with cookie on successJohannes Berg1-11/+22
Now that we have extended error reporting and a new message format for netlink ACK messages, also extend this to be able to return arbitrary cookie data on success. This will allow, for example, nl80211 to not send an extra message for cookies identifying newly created objects, but return those directly in the ACK message. The cookie data size is currently limited to 20 bytes (since Jamal talked about using SHA1 for identifiers.) Thanks to Jamal Hadi Salim for bringing up this idea during the discussions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13genetlink: pass extended ACK report downJohannes Berg1-2/+4
Pass the extended ACK reporting struct down from generic netlink to the families, using the existing struct genl_info for simplicity. Also add support to set the extended ACK information from generic netlink users. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: extended ACK reportingJohannes Berg3-10/+65
Add the base infrastructure and UAPI for netlink extended ACK reporting. All "manual" calls to netlink_ack() pass NULL for now and thus don't get extended ACK reporting. Big thanks goes to Pablo Neira Ayuso for not only bringing up the whole topic at netconf (again) but also coming up with the nlattr passing trick and various other ideas. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05netlink/diag: report flags for netlink socketsAndrey Vagin3-8/+33
cb_running is reported in /proc/self/net/netlink and it is reported by the ss tool, when it gets information from the proc files. sock_diag is a new interface which is used instead of proc files, so it looks reasonable that this interface has to report no less information about sockets than proc files. We use these flags to dump and restore netlink sockets. Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22genetlink: fix counting regression on ctrl_dumpfamily()Stanislaw Gruszka1-1/+3
Commit 2ae0f17df1cd ("genetlink: use idr to track families") replaced if (++n < fams_to_skip) continue; into: if (n++ < fams_to_skip) continue; This subtle change cause that on retry ctrl_dumpfamily() call we omit one family that failed to do ctrl_fill_info() on previous call, because cb->args[0] = n number counts also family that failed to do ctrl_fill_info(). Patch fixes the problem and avoid confusion in the future just decrease n counter when ctrl_fill_info() fail. User visible problem caused by this bug is failure to get access to some genetlink family i.e. nl80211. However problem is reproducible only if number of registered genetlink families is big enough to cause second call of ctrl_dumpfamily(). Cc: Xose Vazquez Perez <xose.vazquez@gmail.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Johannes Berg <johannes@sipsolutions.net> Fixes: 2ae0f17df1cd ("genetlink: use idr to track families") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutexHerbert Xu1-0/+41
On Tue, Mar 14, 2017 at 10:44:10AM +0100, Dmitry Vyukov wrote: > > Yes, please. > Disregarding some reports is not a good way long term. Please try this patch. ---8<--- Subject: netlink: Annotate nlk cb_mutex by protocol Currently all occurences of nlk->cb_mutex are annotated by lockdep as a single class. This causes a false lcokdep cycle involving genl and crypto_user. This patch fixes it by dividing cb_mutex into individual classes based on the netlink protocol. As genl and crypto_user do not use the same netlink protocol this breaks the false dependency loop. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27net: adjust skb->truesize in pskb_expand_head()Eric Dumazet1-5/+3
Slava Shwartsman reported a warning in skb_try_coalesce(), when we detect skb->truesize is completely wrong. In his case, issue came from IPv6 reassembly coping with malicious datagrams, that forced various pskb_may_pull() to reallocate a bigger skb->head than the one allocated by NIC driver before entering GRO layer. Current code does not change skb->truesize, leaving this burden to callers if they care enough. Blindly changing skb->truesize in pskb_expand_head() is not easy, as some producers might track skb->truesize, for example in xmit path for back pressure feedback (sk->sk_wmem_alloc) We can detect the cases where it should be safe to change skb->truesize : 1) skb is not attached to a socket. 2) If it is attached to a socket, destructor is sock_edemux() My audit gave only two callers doing their own skb->truesize manipulation. I had to remove skb parameter in sock_edemux macro when CONFIG_INET is not set to avoid a compile error. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Slava Shwartsman <slavash@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16netlink: do not enter direct reclaim from netlink_trim()Eric Dumazet1-1/+3
In commit d35c99ff77ecb ("netlink: do not enter direct reclaim from netlink_dump()") we made sure to not trigger expensive memory reclaim. Problem is that a bit later, netlink_trim() might be called and trigger memory reclaim. netlink_trim() should be best effort, and really as fast as possible. Under memory pressure, it is fine to not trim this skb. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-10netlink: use blocking notifierWANG Cong1-4/+4
netlink_chain is called in ->release(), which is apparently a process context, so we don't have to use an atomic notifier here. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-17/+15
2016-12-05netlink: Do not schedule work from sk_destructHerbert Xu1-17/+15
It is wrong to schedule a work from sk_destruct using the socket as the memory reserve because the socket will be freed immediately after the return from sk_destruct. Instead we should do the deferral prior to sk_free. This patch does just that. Fixes: 707693c8a498 ("netlink: Call cb->done from a worker thread") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-4/+25
Couple conflicts resolved here: 1) In the MACB driver, a bug fix to properly initialize the RX tail pointer properly overlapped with some changes to support variable sized rings. 2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix overlapping with a reorganization of the driver to support ACPI, OF, as well as PCI variants of the chip. 3) In 'net' we had several probe error path bug fixes to the stmmac driver, meanwhile a lot of this code was cleaned up and reorganized in 'net-next'. 4) The cls_flower classifier obtained a helper function in 'net-next' called __fl_delete() and this overlapped with Daniel Borkamann's bug fix to use RCU for object destruction in 'net'. It also overlapped with Jiri's change to guard the rhashtable_remove_fast() call with a check against tc_skip_sw(). 5) In mlx4, a revert bug fix in 'net' overlapped with some unrelated changes in 'net-next'. 6) In geneve, a stale header pointer after pskb_expand_head() bug fix in 'net' overlapped with a large reorganization of the same code in 'net-next'. Since the 'net-next' code no longer had the bug in question, there was nothing to do other than to simply take the 'net-next' hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29netlink: Call cb->done from a worker threadHerbert Xu2-4/+25
The cb->done interface expects to be called in process context. This was broken by the netlink RCU conversion. This patch fixes it by adding a worker struct to make the cb->done call where necessary. Fixes: 21e4902aea80 ("netlink: Lockless lookup with RCU grace...") Reported-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-4/+2
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-03genetlink: fix a memory leak on error pathWANG Cong1-1/+3
In __genl_register_family(), when genl_validate_assign_mc_groups() fails, we forget to free the memory we possibly allocate for family->attrbuf. Note, some callers call genl_unregister_family() to clean up on error path, it doesn't work because the family is inserted to the global list in the nearly last step. Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-03netlink: netlink_diag_dump() runs without locksEric Dumazet1-4/+1
A recent commit removed locking from netlink_diag_dump() but forgot one error case. ===================================== [ BUG: bad unlock balance detected! ] 4.9.0-rc3+ #336 Not tainted ------------------------------------- syz-executor/4018 is trying to release lock ([ 36.220068] nl_table_lock ) at: [<ffffffff82dc8683>] netlink_diag_dump+0x1a3/0x250 net/netlink/diag.c:182 but there are no more locks to release! other info that might help us debug this: 3 locks held by syz-executor/4018: #0: [ 36.220068] ( sock_diag_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [<ffffffff82c3873b>] sock_diag_rcv+0x1b/0x40 #1: [ 36.220068] ( sock_diag_table_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [<ffffffff82c38e00>] sock_diag_rcv_msg+0x140/0x3a0 #2: [ 36.220068] ( nlk->cb_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [<ffffffff82db6600>] netlink_dump+0x50/0xac0 stack backtrace: CPU: 1 PID: 4018 Comm: syz-executor Not tainted 4.9.0-rc3+ #336 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff8800645df688 ffffffff81b46934 ffffffff84eb3e78 ffff88006ad85800 ffffffff82dc8683 ffffffff84eb3e78 ffff8800645df6b8 ffffffff812043ca dffffc0000000000 ffff88006ad85ff8 ffff88006ad85fd0 00000000ffffffff Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81b46934>] dump_stack+0xb3/0x10f lib/dump_stack.c:51 [<ffffffff812043ca>] print_unlock_imbalance_bug+0x17a/0x1a0 kernel/locking/lockdep.c:3388 [< inline >] __lock_release kernel/locking/lockdep.c:3512 [<ffffffff8120cfd8>] lock_release+0x8e8/0xc60 kernel/locking/lockdep.c:3765 [< inline >] __raw_read_unlock ./include/linux/rwlock_api_smp.h:225 [<ffffffff83fc001a>] _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255 [<ffffffff82dc8683>] netlink_diag_dump+0x1a3/0x250 net/netlink/diag.c:182 [<ffffffff82db6947>] netlink_dump+0x397/0xac0 net/netlink/af_netlink.c:2110 Fixes: ad202074320c ("netlink: Use rhashtable walk interface in diag dump") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01genetlink: fix error return code in genl_register_family()Wei Yongjun1-1/+3
Fix to return a negative error code from the idr_alloc() error handling case instead of 0, as done elsewhere in this function. Also fix the return value check of idr_alloc() since idr_alloc return negative errors on failure, not zero. Fixes: 2ae0f17df1cd ("genetlink: use idr to track families") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29genetlink: Fix generic netlink family unregisterpravin shelar1-1/+1
This patch fixes a typo in unregister operation. Following crash is fixed by this patch. It can be easily reproduced by repeating modprobe and rmmod module that uses genetlink. [ 261.446686] BUG: unable to handle kernel paging request at ffffffffa0264088 [ 261.448921] IP: [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.450494] PGD 1c09067 [ 261.451266] PUD 1c0a063 [ 261.452091] PMD 8068d5067 [ 261.452525] PTE 0 [ 261.453164] [ 261.453618] Oops: 0000 [#1] SMP [ 261.454577] Modules linked in: openvswitch(+) ... [ 261.480753] RIP: 0010:[<ffffffff813cb70e>] [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.483069] RSP: 0018:ffffc90003c0bc28 EFLAGS: 00010282 [ 261.510145] Call Trace: [ 261.510896] [<ffffffff816f10ca>] genl_family_find_byname+0x5a/0x70 [ 261.512819] [<ffffffff816f2319>] genl_register_family+0xb9/0x630 [ 261.514805] [<ffffffffa02840bc>] dp_init+0xbc/0x120 [openvswitch] [ 261.518268] [<ffffffff8100217d>] do_one_initcall+0x3d/0x160 [ 261.525041] [<ffffffff811808a9>] do_init_module+0x60/0x1f1 [ 261.526754] [<ffffffff8110687f>] load_module+0x22af/0x2860 [ 261.530144] [<ffffffff81107026>] SYSC_finit_module+0x96/0xd0 [ 261.531901] [<ffffffff8110707e>] SyS_finit_module+0xe/0x10 [ 261.533605] [<ffffffff8100391e>] do_syscall_64+0x6e/0x180 [ 261.535284] [<ffffffff817c2faf>] entry_SYSCALL64_slow_path+0x25/0x25 [ 261.546512] RIP [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.550198] ---[ end trace 76505a814dd68770 ]--- Fixes: 2ae0f17df1c ("genetlink: use idr to track families"). Reported-by: Jarno Rajahalme <jarno@ovn.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>