Age | Commit message (Collapse) | Author | Files | Lines |
|
Introduce the map read/write flags to the eBPF syscalls that returns the
map fd. The flags is used to set up the file mode when construct a new
file descriptor for bpf maps. To not break the backward capability, the
f_flags is set to O_RDWR if the flag passed by syscall is 0. Otherwise
it should be O_RDONLY or O_WRONLY. When the userspace want to modify or
read the map content, it will check the file mode to see if it is
allowed to make the change.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. This introduces a pointer back to the
struct ip_set, which is used instead of the struct timer_list .data field.
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Florian Westphal <fw@strlen.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: simran singhal <singhalsimran0@gmail.com>
Cc: Muhammad Falak R Wani <falakreyaz@gmail.com>
Cc: netfilter-devel@vger.kernel.org
Cc: coreteam@netfilter.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 2c16d6033264 ("netfilter: xt_bpf: support ebpf") introduced
support for attaching an eBPF object by an fd, with the
'bpf_mt_check_v1' ABI expecting the '.fd' to be specified upon each
IPT_SO_SET_REPLACE call.
However this breaks subsequent iptables calls:
# iptables -A INPUT -m bpf --object-pinned /sys/fs/bpf/xxx -j ACCEPT
# iptables -A INPUT -s 5.6.7.8 -j ACCEPT
iptables: Invalid argument. Run `dmesg' for more information.
That's because iptables works by loading existing rules using
IPT_SO_GET_ENTRIES to userspace, then issuing IPT_SO_SET_REPLACE with
the replacement set.
However, the loaded 'xt_bpf_info_v1' has an arbitrary '.fd' number
(from the initial "iptables -m bpf" invocation) - so when 2nd invocation
occurs, userspace passes a bogus fd number, which leads to
'bpf_mt_check_v1' to fail.
One suggested solution [1] was to hack iptables userspace, to perform a
"entries fixup" immediatley after IPT_SO_GET_ENTRIES, by opening a new,
process-local fd per every 'xt_bpf_info_v1' entry seen.
However, in [2] both Pablo Neira Ayuso and Willem de Bruijn suggested to
depricate the xt_bpf_info_v1 ABI dealing with pinned ebpf objects.
This fix changes the XT_BPF_MODE_FD_PINNED behavior to ignore the given
'.fd' and instead perform an in-kernel lookup for the bpf object given
the provided '.path'.
It also defines an alias for the XT_BPF_MODE_FD_PINNED mode, named
XT_BPF_MODE_PATH_PINNED, to better reflect the fact that the user is
expected to provide the path of the pinned object.
Existing XT_BPF_MODE_FD_ELF behavior (non-pinned fd mode) is preserved.
References: [1] https://marc.info/?l=netfilter-devel&m=150564724607440&w=2
[2] https://marc.info/?l=netfilter-devel&m=150575727129880&w=2
Reported-by: Rafael Buchbinder <rafi@rbk.ms>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
xt_copy_counters_from_user
syzkaller reports an out of bound read in strlcpy(), triggered
by xt_copy_counters_from_user()
Fix this by using memcpy(), then forcing a zero byte at the last position
of the destination, as Florian did for the non COMPAT code.
Fixes: d7591f0c41ce ("netfilter: x_tables: introduce and use xt_copy_counters_from_user")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Chain counters are only enabled on demand since 9f08ea848117, skip them
when dumping them via netlink.
Fixes: 9f08ea848117 ("netfilter: nf_tables: keep chain counters away from hot path")
Reported-by: Johny Mattsson <johny.mattsson+kernel@gmail.com>
Tested-by: Johny Mattsson <johny.mattsson+kernel@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Free memory region, if nf_tables_set_alloc_name is not successful.
Fixes: 387454901bd6 ("netfilter: nf_tables: Allow set names of up to 255 chars")
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
# nft add table filter
# nft add chain filter c1
# nft rename chain filter c1 c2
Error: Could not process rule: No such file or directory
rename chain filter c1 c2
^^^^^^^^^^^^^^^^^^^^^^^^^^
# nft add chain filter c2
# nft rename chain filter c1 c2
# nft list table filter
table ip filter {
chain c2 {
}
chain c2 {
}
}
Fixes: 664b0f8cd8 ("netfilter: nf_tables: add generation mask to chains")
Signed-off-by: JingPiao Chen <chenjingpiao@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fix a race between ip_set_dump_start() and ip_set_swap().
The race is as follows:
* Without holding the ref lock, ip_set_swap() checks ref_netlink of the
set and it is 0.
* ip_set_dump_start() takes a reference on the set.
* ip_set_swap() does the swap (even though it now has a non-zero
reference count).
* ip_set_dump_start() gets the set from ip_set_list again which is now a
different set since it has been swapped.
* ip_set_dump_start() calls __ip_set_put_netlink() and hits a BUG_ON due
to the reference count being 0.
Fix this race by extending the critical region in which the ref lock is
held to include checking the ref counts.
The race can be reproduced with the following script:
while :; do
ipset destroy hash_ip1
ipset destroy hash_ip2
ipset create hash_ip1 hash:ip family inet hashsize 1024 \
maxelem 500000
ipset create hash_ip2 hash:ip family inet hashsize 300000 \
maxelem 500000
ipset create hash_ip3 hash:ip family inet hashsize 1024 \
maxelem 500000
ipset save &
ipset swap hash_ip3 hash_ip2
ipset destroy hash_ip3
wait
done
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Removing the ipset module leaves a small window where one cpu performs
module removal while another runs a command like 'ipset flush'.
ipset uses net_generic(), unregistering the pernet ops frees this
storage area.
Fix it by first removing the user-visible api handlers and the pernet
ops last.
Fixes: 1785e8f473082 ("netfiler: ipset: Add net namespace for ipset")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Wrong comparison prevented the hash types to add a range with more than
2^31 addresses but reported as a success.
Fixes Netfilter's bugzilla id #1005, reported by Oleg Serditov and
Oliver Ford.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
An out of bounds error was detected on an ARM64 target with
Android based kernel 4.9. This occurs while trying to
restore mark on a skb from an inet request socket.
BUG: KASAN: slab-out-of-bounds in socket_match.isra.2+0xc8/0x1f0 net/netfilter/xt_socket.c:248
Read of size 4 at addr ffffffc06a8d824c by task syz-fuzzer/1532
CPU: 7 PID: 1532 Comm: syz-fuzzer Tainted: G W O 4.9.41+ #1
Call trace:
[<ffffff900808d2f8>] dump_backtrace+0x0/0x440 arch/arm64/kernel/traps.c:76
[<ffffff900808d760>] show_stack+0x28/0x38 arch/arm64/kernel/traps.c:226
[<ffffff90085f7dc8>] __dump_stack lib/dump_stack.c:15 [inline]
[<ffffff90085f7dc8>] dump_stack+0xe4/0x134 lib/dump_stack.c:51
[<ffffff900830f358>] print_address_description+0x68/0x258 mm/kasan/report.c:248
[<ffffff900830f770>] kasan_report_error mm/kasan/report.c:347 [inline]
[<ffffff900830f770>] kasan_report.part.2+0x228/0x2f0 mm/kasan/report.c:371
[<ffffff900830fdec>] kasan_report+0x5c/0x70 mm/kasan/report.c:372
[<ffffff900830de98>] check_memory_region_inline mm/kasan/kasan.c:308 [inline]
[<ffffff900830de98>] __asan_load4+0x88/0xa0 mm/kasan/kasan.c:740
[<ffffff90097498f8>] socket_match.isra.2+0xc8/0x1f0 net/netfilter/xt_socket.c:248
[<ffffff9009749a5c>] socket_mt4_v1_v2_v3+0x3c/0x48 net/netfilter/xt_socket.c:272
[<ffffff90097f7e4c>] ipt_do_table+0x54c/0xad8 net/ipv4/netfilter/ip_tables.c:311
[<ffffff90097fcf14>] iptable_mangle_hook+0x6c/0x220 net/ipv4/netfilter/iptable_mangle.c:90
...
Allocated by task 1532:
save_stack_trace_tsk+0x0/0x2a0 arch/arm64/kernel/stacktrace.c:131
save_stack_trace+0x28/0x38 arch/arm64/kernel/stacktrace.c:215
save_stack mm/kasan/kasan.c:495 [inline]
set_track mm/kasan/kasan.c:507 [inline]
kasan_kmalloc+0xd8/0x188 mm/kasan/kasan.c:599
kasan_slab_alloc+0x14/0x20 mm/kasan/kasan.c:537
slab_post_alloc_hook mm/slab.h:417 [inline]
slab_alloc_node mm/slub.c:2728 [inline]
slab_alloc mm/slub.c:2736 [inline]
kmem_cache_alloc+0x14c/0x2e8 mm/slub.c:2741
reqsk_alloc include/net/request_sock.h:87 [inline]
inet_reqsk_alloc+0x4c/0x238 net/ipv4/tcp_input.c:6236
tcp_conn_request+0x2b0/0xea8 net/ipv4/tcp_input.c:6341
tcp_v4_conn_request+0xe0/0x100 net/ipv4/tcp_ipv4.c:1256
tcp_rcv_state_process+0x384/0x18a8 net/ipv4/tcp_input.c:5926
tcp_v4_do_rcv+0x2f0/0x3e0 net/ipv4/tcp_ipv4.c:1430
tcp_v4_rcv+0x1278/0x1350 net/ipv4/tcp_ipv4.c:1709
ip_local_deliver_finish+0x174/0x3e0 net/ipv4/ip_input.c:216
v1->v2: Change socket_mt6_v1_v2_v3() as well as mentioned by Eric
v2->v3: Put the correct fixes tag
Fixes: 01555e74bde5 ("netfilter: xt_socket: add XT_SOCKET_RESTORESKMARK flag")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
IPVS tunnel mode works as simple tunnel (see RFC 3168) copying ECN field
to outer header. That's result in packet drops on egress tunnels in case
the egress tunnel operates as ECN-capable with Full-functionality option
(like ip_tunnel and ip6_tunnel kernel modules), according to RFC 3168
section 9.1.1 recommendation.
This patch implements ECN full-functionality option into ipvs xmit code.
Cc: netdev@vger.kernel.org
Cc: lvs-devel@vger.kernel.org
Signed-off-by: Vadim Fedorenko <vfedorenko@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Simple testcase:
$ ipset create test hash:ip timeout 5
$ ipset add test 1.2.3.4
$ ipset add test 1.2.2.2
$ sleep 5
$ ipset l
Name: test
Type: hash:ip
Revision: 5
Header: family inet hashsize 1024 maxelem 65536 timeout 5
Size in memory: 296
References: 0
Number of entries: 2
Members:
We return "Number of entries: 2" but no members are listed. That is
because mtype_list runs "ip_set_timeout_expired" and does not list the
expired entries, but set->elements is never upated (until mtype_gc
cleans it up later).
Reviewed-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If no spinlock debugging options (CONFIG_GENERIC_LOCKBREAK,
CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_LOCK_ALLOC) are enabled on a UP
platform (e.g. m68k defconfig), arch_spinlock_t is an empty struct,
hence using ARRAY_SIZE(nf_nat_locks) causes a division by zero:
net/netfilter/nf_nat_core.c: In function ‘nf_nat_setup_info’:
net/netfilter/nf_nat_core.c:432: warning: division by zero
net/netfilter/nf_nat_core.c: In function ‘__nf_nat_cleanup_conntrack’:
net/netfilter/nf_nat_core.c:535: warning: division by zero
net/netfilter/nf_nat_core.c:537: warning: division by zero
net/netfilter/nf_nat_core.c: In function ‘nf_nat_init’:
net/netfilter/nf_nat_core.c:810: warning: division by zero
net/netfilter/nf_nat_core.c:811: warning: division by zero
net/netfilter/nf_nat_core.c:824: warning: division by zero
Fix this by using the CONNTRACK_LOCKS definition instead.
Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: 8073e960a03bf7b5 ("netfilter: nat: use keyed locks")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
64bit division causes build/link errors on 32bit architectures. It
prints out error messages like:
ERROR: "__aeabi_uldivmod" [net/netfilter/xt_hashlimit.ko] undefined!
The value of avg passed through by userspace in BYTE mode cannot exceed
U32_MAX. Which means 64bit division in user2rate_bytes is unnecessary.
To fix this I have changed the type of param 'user' to u32.
Since anything greater than U32_MAX is an invalid input we error out in
hashlimit_mt_check_common() when this is the case.
Changes in v2:
Making return type as u32 would cause an overflow for small
values of 'user' (for example 2, 3 etc). To avoid this I bumped up
'r' to u64 again as well as the return type. This is OK since the
variable that stores the result is u64. We still avoid 64bit
division here since 'user' is u32.
Fixes: bea74641e378 ("netfilter: xt_hashlimit: add rate match mode")
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
struct xt_byteslimit_htable used hlist_head, but memory allocation is
done through sizeof(struct list_head).
Signed-off-by: Zhizhou Tian <zhizhou.tian@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
kernel test robot reported:
WARNING: CPU: 0 PID: 1244 at net/netfilter/core.c:218 __nf_hook_entries_try_shrink+0x49/0xcd
[..]
After allowing batching in nf_unregister_net_hooks its possible that an earlier
call to __nf_hook_entries_try_shrink already compacted the list.
If this happens we don't need to do anything.
Fixes: d3ad2c17b4047 ("netfilter: core: batch nf_unregister_net_hooks synchronize_net calls")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
no need to serialize on a single lock, we can partition the table and
add/delete in parallel to different slots.
This restores one of the advantages that got lost with the rhlist
revert.
Cc: Ivan Babrou <ibobrik@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This reverts commit 870190a9ec9075205c0fa795a09fa931694a3ff1.
It was not a good idea. The custom hash table was a much better
fit for this purpose.
A fast lookup is not essential, in fact for most cases there is no lookup
at all because original tuple is not taken and can be used as-is.
What needs to be fast is insertion and deletion.
rhlist removal however requires a rhlist walk.
We can have thousands of entries in such a list if source port/addresses
are reused for multiple flows, if this happens removal requests are so
expensive that deletions of a few thousand flows can take several
seconds(!).
The advantages that we got from rhashtable are:
1) table auto-sizing
2) multiple locks
1) would be nice to have, but it is not essential as we have at
most one lookup per new flow, so even a million flows in the bysource
table are not a problem compared to current deletion cost.
2) is easy to add to custom hash table.
I tried to add hlist_node to rhlist to speed up rhltable_remove but this
isn't doable without changing semantics. rhltable_remove_fast will
check that the to-be-deleted object is part of the table and that
requires a list walk that we want to avoid.
Furthermore, using hlist_node increases size of struct rhlist_head, which
in turn increases nf_conn size.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196821
Reported-by: Ivan Babrou <ibobrik@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
It seems preferrable to limp along if we have a conflicting mapping,
its certainly better than a BUG().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There's no reason for ipvs to create a conn for an ABORT packet
even if sysctl_sloppy_sctp is set.
This patch is to accept it without creating a conn, just as ipvs
does for tcp's RST packet.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit 5e26b1b3abce ("ipvs: support scheduling inverse and icmp SCTP
packets") changed to check packet type early. It introduced a side
effect: if it's not a INIT packet, ports will be set as NULL, and
the packet will be dropped later.
It caused that sctp couldn't create connection when ipvs module is
loaded and any scheduler is registered on server.
Li Shuang reproduced it by running the cmds on sctp server:
# ipvsadm -A -t 1.1.1.1:80 -s rr
# ipvsadm -D -t 1.1.1.1:80
then the server could't work any more.
This patch is to return 1 when it's not an INIT packet. It means ipvs
will accept it without creating a conn for it, just like what it does
for tcp.
Fixes: 5e26b1b3abce ("ipvs: support scheduling inverse and icmp SCTP packets")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull networking updates from David Miller:
1) Support ipv6 checksum offload in sunvnet driver, from Shannon
Nelson.
2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
Dumazet.
3) Allow generic XDP to work on virtual devices, from John Fastabend.
4) Add bpf device maps and XDP_REDIRECT, which can be used to build
arbitrary switching frameworks using XDP. From John Fastabend.
5) Remove UFO offloads from the tree, gave us little other than bugs.
6) Remove the IPSEC flow cache, from Florian Westphal.
7) Support ipv6 route offload in mlxsw driver.
8) Support VF representors in bnxt_en, from Sathya Perla.
9) Add support for forward error correction modes to ethtool, from
Vidya Sagar Ravipati.
10) Add time filter for packet scheduler action dumping, from Jamal Hadi
Salim.
11) Extend the zerocopy sendmsg() used by virtio and tap to regular
sockets via MSG_ZEROCOPY. From Willem de Bruijn.
12) Significantly rework value tracking in the BPF verifier, from Edward
Cree.
13) Add new jump instructions to eBPF, from Daniel Borkmann.
14) Rework rtnetlink plumbing so that operations can be run without
taking the RTNL semaphore. From Florian Westphal.
15) Support XDP in tap driver, from Jason Wang.
16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.
17) Add Huawei hinic ethernet driver.
18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
Delalande.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
i40e: avoid NVM acquire deadlock during NVM update
drivers: net: xgene: Remove return statement from void function
drivers: net: xgene: Configure tx/rx delay for ACPI
drivers: net: xgene: Read tx/rx delay for ACPI
rocker: fix kcalloc parameter order
rds: Fix non-atomic operation on shared flag variable
net: sched: don't use GFP_KERNEL under spin lock
vhost_net: correctly check tx avail during rx busy polling
net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
rxrpc: Make service connection lookup always check for retry
net: stmmac: Delete dead code for MDIO registration
gianfar: Fix Tx flow control deactivation
cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
cxgb4: Fix pause frame count in t4_get_port_stats
cxgb4: fix memory leak
tun: rename generic_xdp to skb_xdp
tun: reserve extra headroom only when XDP is set
net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
net: dsa: bcm_sf2: Advertise number of egress queues
...
|
|
This patch sorts out an asymmetry in deletions. Currently, table and set
deletion commands come with an implicit content flush on deletion.
However, chain deletion results in -EBUSY if there is content in this
chain, so no implicit flush happens. So you have to send a flush command
in first place to delete chains, this is inconsistent and it can be
annoying in terms of user experience.
This patch uses the new NLM_F_NONREC flag to request non-recursive chain
deletion, ie. if the chain to be removed contains rules, then this
returns EBUSY. This problem was discussed during the NFWS'17 in Faro,
Portugal. In iptables, you hit -EBUSY if you try to delete a chain that
contains rules, so you have to flush first before you can remove
anything. Since iptables-compat uses the nf_tables netlink interface, it
has to use the NLM_F_NONREC flag from userspace to retain the original
iptables semantics, ie. bail out on removing chains that contain rules.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Bail out if user requests non-recursive deletion for tables and sets.
This new flags tells nf_tables netlink interface to reject deletions if
tables and sets have content.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Wrap the chain addition path in a function to make it more maintainable.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_tables_newchain() is too large, wrap the chain update path in a
function to make it more maintainable.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnad:
"The main RCU related changes in this cycle were:
- Removal of spin_unlock_wait()
- SRCU updates
- RCU torture-test updates
- RCU Documentation updates
- Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
- Miscellaneous RCU fixes
- CPU-hotplug fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
arch: Remove spin_unlock_wait() arch-specific definitions
locking: Remove spin_unlock_wait() generic definitions
drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
ipc: Replace spin_unlock_wait() with lock/unlock pair
exit: Replace spin_unlock_wait() with lock/unlock pair
completion: Replace spin_unlock_wait() with lock/unlock pair
doc: Set down RCU's scheduling-clock-interrupt needs
doc: No longer allowed to use rcu_dereference on non-pointers
doc: Add RCU files to docbook-generation files
doc: Update memory-barriers.txt for read-to-write dependencies
doc: Update RCU documentation
membarrier: Provide expedited private command
rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
rcu: Add warning to rcu_idle_enter() for irqs enabled
rcu: Make rcu_idle_enter() rely on callers disabling irqs
rcu: Add assertions verifying blocked-tasks list
rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
rcu: Add TPS() protection for _rcu_barrier_trace strings
rcu: Use idle versions of swait to make idle-hack clear
swait: Add idle variants which don't contribute to load average
...
|
|
This patch removes NF_CT_ASSERT() and instead uses WARN_ON().
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
|
|
tested with allmodconfig build.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Register a new limit stateful object type into the stateful object
infrastructure.
Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Just a small refactor patch in order to improve the code readability.
Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds support for overloading stateful objects operations
through the select_ops() callback, just as it is implemented for
expressions.
This change is needed for upcoming additions to the stateful objects
infrastructure.
Signed-off-by: Pablo M. Bermudo Garay <pablombg@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds a new feature to hashlimit that allows matching on the
current packet/byte rate without rate limiting. This can be enabled
with a new flag --hashlimit-rate-match. The match returns true if the
current rate of packets is above/below the user specified value.
The main difference between the existing algorithm and the new one is
that the existing algorithm rate-limits the flow whereas the new
algorithm does not. Instead it *classifies* the flow based on whether
it is above or below a certain rate. I will demonstrate this with an
example below. Let us assume this rule:
iptables -A INPUT -m hashlimit --hashlimit-above 10/s -j new_chain
If the packet rate is 15/s, the existing algorithm would ACCEPT 10
packets every second and send 5 packets to "new_chain".
But with the new algorithm, as long as the rate of 15/s is sustained,
all packets will continue to match and every packet is sent to new_chain.
This new functionality will let us classify different flows based on
their current rate, so that further decisions can be made on them based on
what the current rate is.
This is how the new algorithm works:
We divide time into intervals of 1 (sec/min/hour) as specified by
the user. We keep track of the number of packets/bytes processed in the
current interval. After each interval we reset the counter to 0.
When we receive a packet for match, we look at the packet rate
during the current interval and the previous interval to make a
decision:
if [ prev_rate < user and cur_rate < user ]
return Below
else
return Above
Where cur_rate is the number of packets/bytes seen in the current
interval, prev is the number of packets/bytes seen in the previous
interval and 'user' is the rate specified by the user.
We also provide flexibility to the user for choosing the time
interval using the option --hashilmit-interval. For example the user can
keep a low rate like x/hour but still keep the interval as small as 1
second.
To preserve backwards compatibility we have to add this feature in a new
revision, so I've created revision 3 for hashlimit. The two new options
we add are:
--hashlimit-rate-match
--hashlimit-rate-interval
I have updated the help text to add these new options. Also added a few
tests for the new options.
Suggested-by: Igor Lubashev <ilubashe@akamai.com>
Reviewed-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next
tree. Basically, updates to the conntrack core, enhancements for
nf_tables, conversion of netfilter hooks from linked list to array to
improve memory locality and asorted improvements for the Netfilter
codebase. More specifically, they are:
1) Add expection to hashes after timer initialization to prevent
access from another CPU that walks on the hashes and calls
del_timer(), from Florian Westphal.
2) Don't update nf_tables chain counters from hot path, this is only
used by the x_tables compatibility layer.
3) Get rid of nested rcu_read_lock() calls from netfilter hook path.
Hooks are always guaranteed to run from rcu read side, so remove
nested rcu_read_lock() where possible. Patch from Taehee Yoo.
4) nf_tables new ruleset generation notifications include PID and name
of the process that has updated the ruleset, from Phil Sutter.
5) Use skb_header_pointer() from nft_fib, so we can reuse this code from
the nf_family netdev family. Patch from Pablo M. Bermudo.
6) Add support for nft_fib in nf_tables netdev family, also from Pablo.
7) Use deferrable workqueue for conntrack garbage collection, to reduce
power consumption, from Patch from Subash Abhinov Kasiviswanathan.
8) Add nf_ct_expect_iterate_net() helper and use it. From Florian
Westphal.
9) Call nf_ct_unconfirmed_destroy only from cttimeout, from Florian.
10) Drop references on conntrack removal path when skbuffs has escaped via
nfqueue, from Florian.
11) Don't queue packets to nfqueue with dying conntrack, from Florian.
12) Constify nf_hook_ops structure, from Florian.
13) Remove neededlessly branch in nf_tables trace code, from Phil Sutter.
14) Add nla_strdup(), from Phil Sutter.
15) Rise nf_tables objects name size up to 255 chars, people want to use
DNS names, so increase this according to what RFC 1035 specifies.
Patch series from Phil Sutter.
16) Kill nf_conntrack_default_on, it's broken. Default on conntrack hook
registration on demand, suggested by Eric Dumazet, patch from Florian.
17) Remove unused variables in compat_copy_entry_from_user both in
ip_tables and arp_tables code. Patch from Taehee Yoo.
18) Constify struct nf_conntrack_l4proto, from Julia Lawall.
19) Constify nf_loginfo structure, also from Julia.
20) Use a single rb root in connlimit, from Taehee Yoo.
21) Remove unused netfilter_queue_init() prototype, from Taehee Yoo.
22) Use audit_log() instead of open-coding it, from Geliang Tang.
23) Allow to mangle tcp options via nft_exthdr, from Florian.
24) Allow to fetch TCP MSS from nft_rt, from Florian. This includes
a fix for a miscalculation of the minimal length.
25) Simplify branch logic in h323 helper, from Nick Desaulniers.
26) Calculate netlink attribute size for conntrack tuple at compile
time, from Florian.
27) Remove protocol name field from nf_conntrack_{l3,l4}proto structure.
From Florian.
28) Remove holes in nf_conntrack_l4proto structure, so it becomes
smaller. From Florian.
29) Get rid of print_tuple() indirection for /proc conntrack listing.
Place all the code in net/netfilter/nf_conntrack_standalone.c.
Patch from Florian.
30) Do not built in print_conntrack() if CONFIG_NF_CONNTRACK_PROCFS is
off. From Florian.
31) Constify most nf_conntrack_{l3,l4}proto helper functions, from
Florian.
32) Fix broken indentation in ebtables extensions, from Colin Ian King.
33) Fix several harmless sparse warning, from Florian.
34) Convert netfilter hook infrastructure to use array for better memory
locality, joint work done by Florian and Aaron Conole. Moreover, add
some instrumentation to debug this.
35) Batch nf_unregister_net_hooks() calls, to call synchronize_net once
per batch, from Florian.
36) Get rid of noisy logging in ICMPv6 conntrack helper, from Florian.
37) Get rid of obsolete NFDEBUG() instrumentation, from Varsha Rao.
38) Remove unused code in the generic protocol tracker, from Davide
Caratti.
I think I will have material for a second Netfilter batch in my queue if
time allow to make it fit in this merge window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Three cases of simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This needs to accout for the ipv4/ipv6 header size and the tcp
header without options.
Fixes: 6b5dc98e8fac0 ("netfilter: rt: add support to fetch path mss")
Reported-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
L4 protocol helpers for DCCP, SCTP and UDPlite can't be built as kernel
modules anymore, so we can remove code enclosed in
#ifdef CONFIG_NF_CT_PROTO_{DCCP,SCTP,UDPLITE}_MODULE
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Remove NFDEBUG and use pr_debug() instead of it.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
re-add batching in nf_unregister_net_hooks().
Similar as before, just store an array with to-be-free'd rule arrays
on stack, then call synchronize_net once per batch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Make sure our grow/shrink routine places them in the correct order.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This converts the storage and layout of netfilter hook entries from a
linked list to an array. After this commit, hook entries will be
stored adjacent in memory. The next pointer is no longer required.
The ops pointers are stored at the end of the array as they are only
used in the register/unregister path and in the legacy br_netfilter code.
nf_unregister_net_hooks() is slower than needed as it just calls
nf_unregister_net_hook in a loop (i.e. at least n synchronize_net()
calls), this will be addressed in followup patch.
Test setup:
- ixgbe 10gbit
- netperf UDP_STREAM, 64 byte packets
- 5 hooks: (raw + mangle prerouting, mangle+filter input, inet filter):
empty mangle and raw prerouting, mangle and filter input hooks:
353.9
this patch:
364.2
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
net/netfilter/nft_payload.c:187:18: warning: incorrect type in return expression (expected bool got restricted __sum16 [usertype] check)
net/netfilter/nft_exthdr.c:222:14: warning: cast to restricted __be32
net/netfilter/nft_rt.c:49:23: warning: incorrect type in assignment (different base types expected unsigned int got restricted __be32)
net/netfilter/nft_rt.c:70:25: warning: symbol 'nft_rt_policy' was not declared. Should it be static?
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Fix use after free of struct proc_dir_entry in ipt_CLUSTERIP, patch
from Sabrina Dubroca.
2) Fix spurious EINVAL errors from iptables over nft compatibility layer.
3) Reload pointer to ip header only if there is non-terminal verdict,
ie. XT_CONTINUE, otherwise invalid memory access may happen, patch
from Taehee Yoo.
4) Fix interaction between SYNPROXY and NAT, SYNPROXY adds sequence
adjustment already, however from nf_nat_setup() assumes there's not.
Patch from Xin Long.
5) Fix burst arithmetics in nft_limit as Joe Stringer mentioned during
NFWS in Faro. Patch from Andy Zhou.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Doesn't change generated code, but will make it easier to eventually
make the actual trackers themselvers const.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
CONFIG_NF_CONNTRACK_PROCFS is deprecated, no need to use a function
pointer in the trackers for this. Place the printf formatting in
the one place that uses it.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
no need to waste storage for something that is only needed
in one place and can be deduced from protocol number.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
no need to waste storage for something that is only needed
in one place and can be deduced from protocol number.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
avoids a pointer and allows struct to be const later on.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|