summaryrefslogtreecommitdiffstats
path: root/net/mptcp
AgeCommit message (Collapse)AuthorFilesLines
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-53/+47
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-07mptcp: drop all sub-options except ADD_ADDR when the echo bit is setDavide Caratti1-1/+2
Current Linux carries echo-ed ADD_ADDR over pure TCP ACKs, so there is no need to add a DSS element that would fit only ADD_ADDR with IPv4 address. Drop the DSS from echo-ed ADD_ADDR, regardless of the IP version. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: unify add_addr(6)_generate_hmacGeliang Tang1-56/+25
The length of the IPv4 address is 4 octets and IPv6 is 16. That's the only difference between add_addr_generate_hmac and add_addr6_generate_hmac. This patch dropped the duplicate code and unify them into one. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: drop MPTCP_ADDR_IPVERSION_4/6Geliang Tang2-9/+7
Since the type of the address family in struct mptcp_options_received became sa_family_t, we should set AF_INET/AF_INET6 to it, instead of using MPTCP_ADDR_IPVERSION_4/6. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: use mptcp_addr_info in mptcp_options_receivedGeliang Tang2-45/+23
This patch added a new struct mptcp_addr_info member addr in struct mptcp_options_received, and dropped the original family, addr_id, addr, addr6 and port fields in it. Then we can pass the parameter mp_opt.addr directly to mptcp_pm_add_addr_received and mptcp_pm_add_addr_echoed. Since the port number became big-endian now, use htons to convert the incoming port number to it. Also use ntohs to convert it when passing it to add_addr_generate_hmac or printing it out. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: drop OPTION_MPTCP_ADD_ADDR6Geliang Tang2-15/+9
Since the family field was added in struct mptcp_out_options, no need to use OPTION_MPTCP_ADD_ADDR6 to identify the IPv6 address. Drop it. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: use mptcp_addr_info in mptcp_out_optionsGeliang Tang2-36/+20
This patch moved the mptcp_addr_info struct from protocol.h to mptcp.h, added a new struct mptcp_addr_info member addr in struct mptcp_out_options, and dropped the original addr, addr6, addr_id and port fields in it. Then we can use opts->addr to get the adding address from PM directly using mptcp_pm_add_addr_signal. Since the port number became big-endian now, use ntohs to convert it before sending it out with the ADD_ADDR suboption. Also convert it when passing it to add_addr_generate_hmac or printing it out. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: move flags and ifindex out of mptcp_addr_infoGeliang Tang3-25/+28
This patch moved the flags and ifindex fields from struct mptcp_addr_info to struct mptcp_pm_addr_entry. Add the flags and ifindex values as two new parameters to __mptcp_subflow_connect. In mptcp_pm_create_subflow_or_signal_addr, pass the local address entry's flags and ifindex fields to __mptcp_subflow_connect. In mptcp_pm_nl_add_addr_received, just pass two zeros to it. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-02mptcp: add mptcp reset option supportFlorian Westphal5-13/+122
The MPTCP reset option allows to carry a mptcp-specific error code that provides more information on the nature of a connection reset. Reset option data received gets stored in the subflow context so it can be sent to userspace via the 'subflow closed' netlink event. When a subflow is closed, the desired error code that should be sent to the peer is also placed in the subflow context structure. If a reset is sent before subflow establishment could complete, e.g. on HMAC failure during an MP_JOIN operation, the mptcp skb extension is used to store the reset information. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-02mptcp: remove unneeded check on first subflowPaolo Abeni2-2/+2
Currently we explicitly check for the first subflow being NULL in a couple of places, even if we don't need any special actions in such scenario. Just drop the unneeded checks, to avoid confusion. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-02mptcp: add active MPC mibsPaolo Abeni4-0/+7
We are not currently tracking the active MPTCP connection attempts. Let's add the related counters. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-02mptcp: add mib for token creation fallbackPaolo Abeni4-1/+8
If the MPTCP protocol is unable to create a new token, the socket fallback to plain TCP, let's keep track of such events via a specific MIB. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-01mptcp: revert "mptcp: provide subflow aware release function"Paolo Abeni1-53/+2
This change reverts commit ad98dd37051e ("mptcp: provide subflow aware release function"). The latter introduced a deadlock spotted by syzkaller and is not needed anymore after the previous commit. Fixes: ad98dd37051e ("mptcp: provide subflow aware release function") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-01mptcp: forbit mcast-related sockopt on MPTCP socketsPaolo Abeni1-0/+45
Unrolling mcast state at msk dismantel time is bug prone, as syzkaller reported: ====================================================== WARNING: possible circular locking dependency detected 5.11.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor905/8822 is trying to acquire lock: ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323 but task is already holding lock: ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline] ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507 which lock already depends on the new lock. Instead we can simply forbit any mcast-related setsockopt Fixes: 717e79c867ca5 ("mptcp: Add setsockopt()/getsockopt() socket operations") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-30mptcp: remove id 0 addressGeliang Tang1-0/+43
This patch added a new function mptcp_nl_remove_id_zero_address to remove the id 0 address. In this function, traverse all the existing msk sockets to find the msk matched the input IP address. Then fill the removing list with id 0, and pass it to mptcp_pm_remove_addr and mptcp_pm_remove_subflow. Suggested-by: Paolo Abeni <pabeni@redhat.com> Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-30mptcp: unify RM_ADDR and RM_SUBFLOW receivingGeliang Tang1-49/+33
There are some duplicate code in mptcp_pm_nl_rm_addr_received and mptcp_pm_nl_rm_subflow_received. This patch unifies them into a new function named mptcp_pm_nl_rm_addr_or_subflow. In it, use the input parameter rm_type to identify it's now removing an address or a subflow. Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-30mptcp: remove all subflows involving id 0 addressGeliang Tang1-4/+0
There's only one subflow involving the non-zero id address, but there may be multi subflows involving the id 0 address. Here's an example: local_id=0, remote_id=0 local_id=1, remote_id=0 local_id=0, remote_id=1 If the removing address id is 0, all the subflows involving the id 0 address need to be removed. In mptcp_pm_nl_rm_addr_received/mptcp_pm_nl_rm_subflow_received, the "break" prevents the iteration to the next subflow, so this patch dropped them. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-28mptcp: subflow.c: Fix a typoBhaskar Chowdhury1-1/+1
s/concerened/concerned/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26mptcp: rename mptcp_pm_nl_add_addr_send_ackGeliang Tang3-6/+6
Since mptcp_pm_nl_add_addr_send_ack is now used for both ADD_ADDR and RM_ADDR cases, rename it to mptcp_pm_nl_addr_send_ack. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26mptcp: send ack for rm_addrGeliang Tang3-5/+7
This patch changes the sending ACK conditions for the ADD_ADDR, send an ACK packet for RM_ADDR too. In mptcp_pm_remove_addr, invoke mptcp_pm_nl_add_addr_send_ack to send the ACK packet. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26mptcp: drop useless addr_signal clearGeliang Tang1-8/+0
msk->pm.addr_signal is cleared in mptcp_pm_add_addr_signal, no need to clear it in mptcp_pm_nl_add_addr_send_ack again. Drop it. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26mptcp: move to next addr when subflow creation failGeliang Tang3-0/+18
When an invalid address was announced, the subflow couldn't be created for this address. Therefore mptcp_pm_nl_subflow_established couldn't be invoked. Then the next addresses in the local address list didn't have a chance to be announced. This patch invokes the new function mptcp_pm_add_addr_echoed when the address is echoed. In it, use mptcp_lookup_anno_list_by_saddr to check whether this address is in the anno_list. If it is, PM schedules the status MPTCP_PM_SUBFLOW_ESTABLISHED to invoke mptcp_pm_create_subflow_or_signal_addr to deal with the next address in the local address list. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26mptcp: export lookup_anno_list_by_saddrGeliang Tang2-5/+8
This patch exported the static function lookup_anno_list_by_saddr, and renamed it to mptcp_lookup_anno_list_by_saddr. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26mptcp: move to next addr when timeoutGeliang Tang1-0/+3
This patch called mptcp_pm_subflow_established to move to the next address when an ADD_ADDR has been retransmitted the maximum number of times. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26mptcp: drop unused subflow in mptcp_pm_subflow_establishedGeliang Tang3-5/+3
This patch drops the unused parameter subflow in mptcp_pm_subflow_established(). Fixes: 926bdeab5535 ("mptcp: Implement path manager interface commands") Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26mptcp: skip connecting the connected addressGeliang Tang1-0/+23
This patch added a new helper named lookup_subflow_by_daddr to find whether the destination address is in the msk's conn_list. In mptcp_pm_nl_add_addr_received, use lookup_subflow_by_daddr to check whether the announced address is already connected. If it is, skip connecting this address and send out the echo. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26mptcp: drop argument port from mptcp_pm_announce_addrGeliang Tang3-10/+7
Drop the redundant argument 'port' from mptcp_pm_announce_addr, use the port field of another argument 'addr' instead. Fixes: 0f5c9e3f079f ("mptcp: add port parameter for mptcp_pm_announce_addr") Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26mptcp: clean-up the rtx pathPaolo Abeni2-31/+12
After the previous patch we can easily avoid invoking the workqueue to perform the retransmission, if the msk socket lock is held at rtx timer expiration. This also simplifies the relevant code. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-12/+21
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18ipv6: weaken the v4mapped source checkJakub Kicinski1-0/+5
This reverts commit 6af1799aaf3f1bc8defedddfa00df3192445bbf3. Commit 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped source address") introduced an input check against v4mapped addresses. Use of such addresses on the wire is indeed questionable and not allowed on public Internet. As the commit pointed out https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02 lists potential issues. Unfortunately there are applications which use v4mapped addresses, and breaking them is a clear regression. For example v4mapped addresses (or any semi-valid addresses, really) may be used for uni-direction event streams or packet export. Since the issue which sparked the addition of the check was with TCP and request_socks in particular push the check down to TCPv6 and DCCP. This restores the ability to receive UDPv6 packets with v4mapped address as the source. Keep using the IPSTATS_MIB_INHDRERRORS statistic to minimize the user-visible changes. Fixes: 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped source address") Reported-by: Sunyi Shao <sunyishao@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15mptcp: fix ADD_ADDR HMAC in case port is specifiedDavide Caratti1-10/+14
Currently, Linux computes the HMAC contained in ADD_ADDR sub-option using the Address Id and the IP Address, and hardcodes a destination port equal to zero. This is not ok for ADD_ADDR with port: ensure to account for the endpoint port when computing the HMAC, in compliance with RFC8684 §3.4.1. Fixes: 22fb85ffaefb ("mptcp: add port support for ADD_ADDR suboption writing") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12mptcp: remove a list of addrs when flushingGeliang Tang1-4/+4
This patch invoked mptcp_nl_remove_addrs_list to remove a list of addresses when the netlink flushes addresses, instead of using mptcp_nl_remove_subflow_and_signal_addr to remove them one by one. And dropped the unused parameter net in __flush_addrs too. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12mptcp: remove multi addresses and subflows in PMGeliang Tang1-0/+48
This patch implemented the function to remove a list of addresses and subflows, named mptcp_nl_remove_addrs_list, which had a input parameter rm_list as the removing addresses list. In mptcp_nl_remove_addrs_list, traverse all the existing msk sockets to invoke mptcp_pm_remove_addrs_and_subflows to remove a list of addresses for each msk socket. In mptcp_pm_remove_addrs_and_subflows, traverse all the addresses in the removing addresses list, to find whether this address is in the conn_list or anno_list. If it is, put the address ID into the removing address list or the removing subflow list, and pass the two lists to mptcp_pm_remove_addr and mptcp_pm_remove_subflow. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12mptcp: remove multi subflows in PMGeliang Tang3-22/+31
This patch dealt with removing multi subflows in PM: In mptcp_pm_remove_subflow, changed the input parameter local_id as an list of removing address ids, and passed the list to mptcp_pm_nl_rm_subflow_received. In mptcp_pm_nl_rm_subflow_received, iterated each address id from the received ids list. Then shut down and closed each address id's subsocket. In mptcp_nl_remove_subflow_and_signal_addr, put the single address id into an ids list, and passed it to mptcp_pm_remove_subflow. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12mptcp: remove multi addresses in PMGeliang Tang2-17/+20
This patch dropped the member rm_id of struct mptcp_pm_data. Use rm_list_rx in mptcp_pm_nl_rm_addr_received instead of using rm_id. In mptcp_pm_nl_rm_addr_received, iterated each address id from pm.rm_list_rx, then shut down and closed each address id's subsocket. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12mptcp: add rm_list_rx in mptcp_pm_dataGeliang Tang2-1/+3
This patch added a new member rm_list_rx for struct mptcp_pm_data as an list of the removing address ids on the incoming direction. Initialized its nr field to zero in mptcp_pm_data_init. In mptcp_pm_rm_addr_received, set it as the input rm_list. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12mptcp: add rm_list in mptcp_options_receivedGeliang Tang3-10/+18
This patch changed the member rm_id in struct mptcp_options_received as a list of the removing address ids, and renamed it to rm_list. In mptcp_parse_option, parsed the RM_ADDR suboption and filled them into the rm_list in struct mptcp_options_received. In mptcp_incoming_options, passed this rm_list to the function mptcp_pm_rm_addr_received. It also changed the parameter type of mptcp_pm_rm_addr_received. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12mptcp: add rm_list_tx in mptcp_pm_dataGeliang Tang3-10/+18
This patch added a new member rm_list_tx for struct mptcp_pm_data as the removing address list on the outgoing direction. Initialize its nr field to zero in mptcp_pm_data_init. In mptcp_pm_remove_anno_addr, put the single address id into an removing list, and passed it to mptcp_pm_remove_addr. In mptcp_pm_remove_addr, save the input rm_list to rm_list_tx in struct mptcp_pm_data. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12mptcp: add rm_list in mptcp_out_optionsGeliang Tang3-12/+40
This patch defined a new struct mptcp_rm_list, the ids field was an array of the removing address ids, the nr field was the valid number of removing address ids in the array. The array size was definced as a new macro MPTCP_RM_IDS_MAX. Changed the member rm_id of struct mptcp_out_options to rm_list. In mptcp_established_options_rm_addr, invoked mptcp_pm_rm_addr_signal to get the rm_list. According the number of addresses in it, calculated the padded RM_ADDR suboption length. And saved the ids array in struct mptcp_out_options's rm_list member. In mptcp_write_options, iterated each address id from struct mptcp_out_options's rm_list member, set the invalid ones as TCPOPT_NOP, then filled them into the RM_ADDR suboption. Changed TCPOLEN_MPTCP_RM_ADDR_BASE from 4 to 3. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12mptcp: fix bit MPTCP_PUSH_PENDING testsDan Carpenter1-2/+2
The MPTCP_PUSH_PENDING define is 6 and these tests should be testing if BIT(6) is set. Fixes: c2e6048fa1cf ("mptcp: fix race in release_cb") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08mptcp: fix length of ADD_ADDR with port sub-optionDavide Caratti1-6/+8
in current Linux, MPTCP peers advertising endpoints with port numbers use a sub-option length that wrongly accounts for the trailing TCP NOP. Also, receivers will only process incoming ADD_ADDR with port having such wrong sub-option length. Fix this, making ADD_ADDR compliant to RFC8684 §3.4.1. this can be verified running tcpdump on the kselftests artifacts: unpatched kernel: [root@bottarga mptcp]# tcpdump -tnnr unpatched.pcap | grep add-addr reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535 IP 10.0.1.1.10000 > 10.0.1.2.53078: Flags [.], ack 101, win 509, options [nop,nop,TS val 214459678 ecr 521312851,mptcp add-addr v1 id 1 a00:201:2774:2d88:7436:85c3:17fd:101], length 0 IP 10.0.1.2.53078 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 521312852 ecr 214459678,mptcp add-addr[bad opt]] patched kernel: [root@bottarga mptcp]# tcpdump -tnnr patched.pcap | grep add-addr reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1), snapshot length 65535 IP 10.0.1.1.10000 > 10.0.1.2.38178: Flags [.], ack 101, win 509, options [nop,nop,TS val 3728873902 ecr 2732713192,mptcp add-addr v1 id 1 10.0.2.1:10100 hmac 0xbccdfcbe59292a1f,nop,nop], length 0 IP 10.0.1.2.38178 > 10.0.1.1.10000: Flags [.], ack 101, win 502, options [nop,nop,TS val 2732713195 ecr 3728873902,mptcp add-addr v1-echo id 1 10.0.2.1:10100,nop,nop], length 0 Fixes: 22fb85ffaefb ("mptcp: add port support for ADD_ADDR suboption writing") CC: stable@vger.kernel.org # 5.11+ Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04mptcp: free resources when the port number is mismatchedGeliang Tang1-6/+7
When the port number is mismatched with the announced ones, use 'goto dispose_child' to free the resources instead of using 'goto out'. This patch also moves the port number checking code in subflow_syn_recv_sock before mptcp_finish_join, otherwise subflow_drop_ctx will fail in dispose_child. Fixes: 5bc56388c74f ("mptcp: add port number check for MP_JOIN") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04mptcp: fix missing wakeupPaolo Abeni1-2/+8
__mptcp_clean_una() can free write memory and should wake-up user-space processes when needed. When such function is invoked by the MPTCP receive path, the wakeup is not needed, as the TCP stack will later trigger subflow_write_space which will do the wakeup as needed. Other __mptcp_clean_una() call sites need an additional wakeup check Let's bundle the relevant code in a new helper and use it. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/165 Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks") Fixes: 64b9cea7a0af ("mptcp: fix spurious retransmissions") Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04mptcp: fix race in release_cbPaolo Abeni1-12/+21
If we receive a MPTCP_PUSH_PENDING even from a subflow when mptcp_release_cb() is serving the previous one, the latter will be delayed up to the next release_sock(msk). Address the issue implementing a test/serve loop for such event. Additionally rename the push helper to __mptcp_push_pending() to be more consistent with the existing code. Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04mptcp: factor out __mptcp_retrans helper()Paolo Abeni1-43/+50
Will simplify the following patch, no functional change intended. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04mptcp: reset 'first' and ack_hint on subflow closeFlorian Westphal1-0/+9
Just like with last_snd, we have to NULL 'first' on subflow close. ack_hint isn't strictly required (its never dereferenced), but better to clear this explicitly as well instead of making it an exception. msk->first is dereferenced unconditionally at accept time, but at that point the ssk is not on the conn_list yet -- this means worker can't see it when iterating the conn_list. Reported-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04mptcp: dispose initial struct socket when its subflow is closedFlorian Westphal1-6/+12
Christoph Paasch reported following crash: dst_release underflow WARNING: CPU: 0 PID: 1319 at net/core/dst.c:175 dst_release+0xc1/0xd0 net/core/dst.c:175 CPU: 0 PID: 1319 Comm: syz-executor217 Not tainted 5.11.0-rc6af8e85128b4d0d24083c5cac646e891227052e0c #70 Call Trace: rt_cache_route+0x12e/0x140 net/ipv4/route.c:1503 rt_set_nexthop.constprop.0+0x1fc/0x590 net/ipv4/route.c:1612 __mkroute_output net/ipv4/route.c:2484 [inline] ... The worker leaves msk->subflow alone even when it happened to close the subflow ssk associated with it. Fixes: 866f26f2a9c33b ("mptcp: always graft subflow socket to parent") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/157 Reported-by: Christoph Paasch <cpaasch@apple.com> Suggested-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04mptcp: fix memory accounting on allocation errorPaolo Abeni1-0/+1
In case of memory pressure the MPTCP xmit path keeps at most a single skb in the tx cache, eventually freeing additional ones. The associated counter for forward memory is not update accordingly, and that causes the following splat: WARNING: CPU: 0 PID: 12 at net/core/stream.c:208 sk_stream_kill_queues+0x3ca/0x530 net/core/stream.c:208 Modules linked in: CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.11.0-rc2 #59 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:sk_stream_kill_queues+0x3ca/0x530 net/core/stream.c:208 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e 63 01 00 00 8b ab 00 01 00 00 e9 60 ff ff ff e8 2f 24 d3 fe 0f 0b eb 97 e8 26 24 d3 fe <0f> 0b eb a0 e8 1d 24 d3 fe 0f 0b e9 a5 fe ff ff 4c 89 e7 e8 0e d0 RSP: 0018:ffffc900000c7bc8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88810030ac40 RSI: ffffffff8262ca4a RDI: 0000000000000003 RBP: 0000000000000d00 R08: 0000000000000000 R09: ffffffff85095aa7 R10: ffffffff8262c9ea R11: 0000000000000001 R12: ffff888108908100 R13: ffffffff85095aa0 R14: ffffc900000c7c48 R15: 1ffff92000018f85 FS: 0000000000000000(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa7444baef8 CR3: 0000000035ee9005 CR4: 0000000000170ef0 Call Trace: __mptcp_destroy_sock+0x4a7/0x6c0 net/mptcp/protocol.c:2547 mptcp_worker+0x7dd/0x1610 net/mptcp/protocol.c:2272 process_one_work+0x896/0x1170 kernel/workqueue.c:2275 worker_thread+0x605/0x1350 kernel/workqueue.c:2421 kthread+0x344/0x410 kernel/kthread.c:292 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:296 At close time, as reported by syzkaller/Christoph. This change address the issue properly updating the fwd allocated memory counter in the error path. Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/136 Fixes: 724cfd2ee8aa ("mptcp: allocate TX skbs in msk context") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04mptcp: put subflow sock on connect errorFlorian Westphal1-0/+1
mptcp_add_pending_subflow() performs a sock_hold() on the subflow, then adds the subflow to the join list. Without a sock_put the subflow sk won't be freed in case connect() fails. unreferenced object 0xffff88810c03b100 (size 3000): [..] sk_prot_alloc.isra.0+0x2f/0x110 sk_alloc+0x5d/0xc20 inet6_create+0x2b7/0xd30 __sock_create+0x17f/0x410 mptcp_subflow_create_socket+0xff/0x9c0 __mptcp_subflow_connect+0x1da/0xaf0 mptcp_pm_nl_work+0x6e0/0x1120 mptcp_worker+0x508/0x9a0 Fixes: 5b950ff4331ddda ("mptcp: link MPC subflow into msk only after accept") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04mptcp: reset last_snd on subflow closeFlorian Westphal1-0/+5
Send logic caches last active subflow in the msk, so it needs to be cleared when the cached subflow is closed. Fixes: d5f49190def61c ("mptcp: allow picking different xmit subflows") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/155 Reported-by: Christoph Paasch <cpaasch@apple.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 10:22:16 +0000