summaryrefslogtreecommitdiffstats
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2014-07-28Merge tag 'master-2014-07-25' of ↵David S. Miller16-166/+637
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-07-25 Please pull this batch of updates intended for the 3.17 stream! For the mac80211 bits, Johannes says: "We have a lot of TDLS patches, among them a fix that should make hwsim tests happy again. The rest, this time, is mostly small fixes." For the Bluetooth bits, Gustavo says: "Some more patches for 3.17. The most important change here is the move of the 6lowpan code to net/6lowpan. It has been agreed with Davem that this change will go through the bluetooth tree. The rest are mostly clean up and fixes." and, "Here follows some more patches for 3.17. These are mostly fixes to what we've sent to you before for next merge window." For the iwlwifi bits, Emmanuel says: "I have the usual amount of BT Coex stuff. Arik continues to work on TDLS and Ariej contributes a few things for HS2.0. I added a few more things to the firmware debugging infrastructure. Eran fixes a small bug - pretty normal content." And for the Atheros bits, Kalle says: "For ath6kl me and Jessica added support for ar6004 hw3.0, our latest version of ar6004. For ath10k Janusz added a printout so that it's easier to check what ath10k kconfig options are enabled. He also added a debugfs file to configure maximum amsdu and ampdu values. Also we had few fixes as usual." On top of that is the usual large batch of various driver updates -- brcmfmac, mwifiex, the TI drivers, and wil6210 all get some action. Rafał has also been very busy with b43 and related updates. Also, I pulled the wireless tree into this in order to resolve a merge conflict... P.S. The change to fs/compat_ioctl.c reflects a name change in a Bluetooth header file... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-25Merge branch 'master' of ↵John W. Linville2-11/+14
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/cfg.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22mac80211: fix crash on getting sta info with uninitialized rate controlFelix Fietkau1-1/+4
If the expected throughput is queried before rate control has been initialized, the minstrel op for it will crash while trying to access the rate table. Check for WLAN_STA_RATE_CONTROL before attempting to use the rate control op. Reported-by: Jean-Pierre Tosoni <jp.tosoni@acksys.fr> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville14-155/+623
2014-07-21mac80211: add support for Rx reordering offloadingMichal Kazior3-23/+118
Some drivers may be performing most of Tx/Rx aggregation on their own (e.g. in firmware) including AddBa/DelBa negotiations but may otherwise require Rx reordering assistance. The patch exports 2 new functions for establishing Rx aggregation sessions in assumption device driver has taken care of the necessary negotiations. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [fix endian bug] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: fix Rx reordering with RX_FLAG_AMSDU_MOREMichal Kazior4-24/+62
Some drivers (e.g. ath10k) report A-MSDU subframes individually with identical seqno. The A-MPDU Rx reorder code did not account for that which made it practically unusable with drivers using RX_FLAG_AMSDU_MORE because it would end up dropping a lot of frames resulting in confusion in upper network transport layers. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: remove useless NULL checksEytan Lifshitz1-3/+0
sdata can't be NULL, and key being NULL is really not possible unless the code is modified. The sdata check made a static analyze (klocwork) unhappy because we would get pointer to local (sdata->local) and only then check if sdata is non-NULL. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [remove !key check as well] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: fix a potential NULL access in ieee80211_crypto_hw_decryptMax Stepanov1-1/+1
The NULL pointer access could happen when ieee80211_crypto_hw_decrypt is called from ieee80211_rx_h_decrypt with the following condition: 1. rx->key->conf.cipher is not WEP, CCMP, TKIP or AES_CMAC 2. rx->sta is NULL When ieee80211_crypto_hw_decrypt is called, it verifies rx->sta->cipher_scheme and it will cause Oops if rx->sta is NULL. This path adds an addirional rx->sta == NULL verification in ieee80211_crypto_hw_decrypt for this case. Signed-off-by: Max Stepanov <Max.Stepanov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: remove redundant IEEE80211_STA_CSA_RECEIVED flagLuciano Coelho2-8/+1
The csa_active flag was added in sdata a while ago and made IEEE80211_STA_CSA_RECEIVED redundant. The new flag is also used to mark when CSA is ongoing on other iftypes and took over the old one as the preferred method for checking whether we're in the middle of a channel switch. Remove the old, redundant flag. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: make sure TDLS teardown packet is sent on timeLiad Kaufman1-0/+11
Since the teardown packet is created while the queues are stopped, it isn't sent immediately, but rather is pending. To be sure that when we flush the queues prior to destroying the station we also send this packet - the tasklet handling pending packets is invoked to flush the packets. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: ArikX Nemtsov <arik@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: ignore frames between TDLS peers when operating as APArik Nemtsov1-0/+8
If the AP receives actions frames destined for other peers, it may mistakenly toggle BA-sessions from itself to a peer. Ignore TDLS data packets as well - the AP should not handle them. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: disable VHT for TDLSArik Nemtsov1-0/+4
TDLS VHT support requires some more information elements during setup. While these are not there, mask out the peer's VHT capabilities so that VHT rates are not mistakenly used. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: set Rx highest rate in ht_capArik Nemtsov1-0/+3
Set for completeness mostly, currently unused in the code. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: support HT for TDLS stationsArik Nemtsov2-8/+87
Add the HT capabilities and HT operation information elements to TDLS setup packets where appropriate. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: move TDLS data to mgd private partArik Nemtsov4-19/+20
We can only be a station for TDLS connections. Also fix a bug where a delayed work could be left scheduled if the station interface was brought down during TDLS setup. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: add TDLS QoS param IE on setup-confirmArik Nemtsov1-0/+124
When TDLS QoS is supported by the the peer and the local card, add the WMM parameter IE to the setup-confirm frame. Take the QoS settings from the current AP, or if unsupported, use the default values from the specification. This behavior is mandated by IEEE802.11-2012 section 10.22.4. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: add QoS IE during TDLS setup startArik Nemtsov5-21/+26
If QoS is supported by the card, add an appropriate IE to TDLS setup- request and setup-response frames. Consolidate the setting of the WMM info IE across mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: set TDLS capab to zero on failure framesArik Nemtsov1-4/+12
When sending setup-failure frames, set the capability field to zero, as mandated by the specification (IEEE802.11-2012 8.5.13). Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: avoid adding some IEs on TDLS setup failure packetsArik Nemtsov1-26/+32
Most setup-specific information elements are not to be added when a setup frame is sent with an error status code. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: split extra TDLS IEs in setup framesArik Nemtsov1-7/+70
When building TDLS setup frames, use the IE order mandates in the specification, splitting extra IEs coming from usermode. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: consolidate TDLS IE treatmentArik Nemtsov1-28/+41
Add all information elements for TDLS discovery and setup in the same function. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: fix error path for TDLS setupArik Nemtsov1-6/+10
The patch "8f02e6b mac80211: make sure TDLS peer STA exists during setup" broke TDLS error paths where the STA doesn't exist when sending the error. Fix it by only testing for STA existence during a non-error flow. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: track TDLS initiator internallyArik Nemtsov2-11/+27
Infer the TDLS initiator and track it in mac80211 via a STA flag. This avoids breaking old userspace that doesn't pass it via nl80211 APIs. The only case where userspace will need to pass the initiator is when the STA is removed due to unreachability before a teardown packet is sent. Support for unreachability was only recently added to wpa_supplicant, so it won't be a problem in practice. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-18mac80211: suppress unused variable warning without lockdepJohannes Berg1-1/+1
When lockdep isn't compiled, a local variable isn't used (it's only in a macro argument), annotate it to suppress the compiler warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-15mac80211: remove unnecessary break after returnFabian Frederick1-1/+0
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen1-3/+3
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10Merge branch 'master' of ↵John W. Linville1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-07-07Revert "mac80211: move "bufferable MMPDU" check to fix AP mode scan"Johannes Berg1-10/+10
This reverts commit 277d916fc2e959c3f106904116bb4f7b1148d47a as it was at least breaking iwlwifi by setting the IEEE80211_TX_CTL_NO_PS_BUFFER flag in all kinds of interface modes, not only for AP mode where it is appropriate. To avoid reintroducing the original problem, explicitly check for probe request frames in the multicast buffering code. Cc: stable@vger.kernel.org Fixes: 277d916fc2e9 ("mac80211: move "bufferable MMPDU" check to fix AP mode scan") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: use chanctx reservation for STA CSAMichal Kazior3-104/+69
Channel switch finalization is now 2-step. First step is when driver calls chswitch_done(), the other is when reservation is actually finalized (which be defered for in-place reservation). It is now safe to call ieee80211_chswitch_done() more than once. Also remove the ieee80211_vif_change_channel() because it is no longer used. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: use chanctx reservation for AP CSAMichal Kazior2-29/+88
Channel switch finalization is now 2-step. First step is when driver calls csa_finish(), the other is when reservation is actually finalized (which can be deferred for in-place reservation). It is now safe to call ieee80211_csa_finish() more than once. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: make check_combinations() aware of chanctx reservationMichal Kazior1-4/+31
The ieee80211_check_combinations() computes radar_detect accordingly depending on chanctx reservation status. This makes it possible to use the function for channel_switch validation. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: implement multi-vif in-place reservationsMichal Kazior3-85/+715
Multi-vif in-place reservations happen when it is impossible to allocate more channel contexts as indicated by interface combinations. Such reservations are not finalized until all assigned interfaces are ready. This still doesn't handle all possible cases (i.e. degradation of number of channels) properly. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: split sched scan IEsDavid Spinadel2-24/+25
Split sched scan IEs to band specific and not band specific blocks. Common IEs blocks may be sent to the FW once per command, instead of per band. This allows optimization of size of the command, which may be required by some drivers (eg. iwlmvm with newer firmware version). As this changes the mac80211 API, update all drivers to use the new version correctly, even if they don't (yet) make use of the split data. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: support more than one band in scan requestDavid Spinadel4-61/+140
Some drivers (such as iwlmvm) can handle multiple bands in a single HW scan request. Add a HW flag to indicate that the driver support this. To hold the required data, create a separate structure for HW scan request that holds cfg scan request and data about different parts of the scan IEs. As this changes the mac80211 API, update all drivers using it to use the correct new function type/argument. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: protect TDLS discovery sessionArik Nemtsov3-1/+32
After sending a TDLS discovery-request, we expect a reply to arrive on the AP's channel. We must stay on the channel (no PSM, scan, etc.), since a TDLS setup-response is a direct packet not buffered by the AP. Add a new mac80211 driver callback to allow discovery session protection. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: make sure TDLS peer STA exists during setupArik Nemtsov1-0/+13
Make sure userspace added a TDLS peer station before invoking the transmission of the first setup frame. This ensures packets to the peer won't go through the AP path. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: add API to request TDLS operation from userspaceArik Nemtsov1-0/+17
Write a mac80211 to the cfg80211 API for requesting a userspace TDLS operation. Define TDLS specific reason codes that can be used here. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: implement proper Tx path flushing for TDLSArik Nemtsov2-0/+58
As the spec mandates, flush data in the AP path before transmitting the first setup frame. Data packets transmitted during setup are already dropped in the Tx path. For the teardown flow, flush all packets in the direct path before transmitting the teardown frame. Un-authorize the peer sta after teardown is sent, forcing all subsequent Tx to the peer through the AP. Make sure to flush the queues when disabling the link to get the teardown packet out. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> [adjust to Luca's new quuee API and stop only vif queues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: split tdls_mgmt functionArik Nemtsov1-23/+55
There are setup/teardown specific actions to be done that accompany the sending of a TDLS management packet. Split the main function to simplify future additions. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: use TDLS initiator in tdls_mgmt operationsArik Nemtsov1-12/+28
The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Use the value from userspace in order to have a correct teardown packet. With the current code, a teardown from the responder side fails the TDLS MIC check because of a bad link identifier IE. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23cfg80211: pass TDLS initiator in tdls_mgmt operationsArik Nemtsov2-2/+4
The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: cleanup TDLS state during failed setupArik Nemtsov3-24/+115
When setting up a TDLS session, register a delayed work to remove the peer if setup times out. Prevent concurrent setups to support this capacity. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: set auth flags after other station infoArik Nemtsov1-3/+13
For TDLS, the AUTHORIZED flag arrives with all other important station info (supported rates, HT/VHT caps, ...). Make sure to set the station state in the low-level driver after transferring this information to the mac80211 STA entry. This aligns the STA information during sta_state callbacks with the non-TDLS case. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: clarify TDLS Tx handlingArik Nemtsov1-16/+17
Rename the flags used in the Tx path and add an explanation for the reasons to drop, send directly or through the AP. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: stop only the queues assigned to the vif during channel switchLuciano Coelho4-64/+35
Instead of stopping all the hardware queues during channel switch, which is especially bad when we have large CSA counts, stop only the queues that are assigned to the vif that is performing the channel switch. Additionally, check for (sdata->csa_block_tx) instead of calling ieee80211_csa_needs_block_tx(), which can now be removed. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: add functions to stop and wake all queues assigned to a vifLuciano Coelho2-6/+41
In some cases we may want to stop the queues of a single vif (for instance during a channel-switch). Add a function that stops all the queues that are assigned to a vif. If a queue is assigned to more than one vif, the corresponding netdev subqueue of the other vif(s) will also be stopped. If the HW doesn't set the IEEE80211_HW_QUEUE_CONTROL flag, then all queues are stopped. Also add a corresponding function to wake the queues of a vif back. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: introduce refcount for queue_stop_reasonsLuciano Coelho10-46/+98
Sometimes different vifs may be stopping the queues for the same reason (e.g. when several interfaces are performing a channel switch). Instead of using a bitmask for the reasons, use an integer that holds a refcount instead. In order to keep it backwards compatible, introduce a boolean in some functions that tell us whether the queue stopping should be refcounted or not. For now, use not refcounted for all calls to keep it functionally the same as before. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: don't stop all queues when flushingLuciano Coelho1-2/+2
There is no need to stop all queues when we want to flush specific queues, so stop only the queues that will be flushed. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23net: Mac80211: Remove silly timespec danceThomas Gleixner2-9/+3
Converting time from one format to another seems to give coders a warm and fuzzy feeling. Use the proper interfaces. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John W. Linville <linville@tuxdriver.com> [fix compile error] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: Use ktime_get_ts()Thomas Gleixner2-3/+3
do_posix_clock_monotonic_gettime() is a leftover from the initial posix timer implementation which maps to ktime_get_ts(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>