summaryrefslogtreecommitdiffstats
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2019-04-26Merge tag 'mac80211-next-for-davem-2019-04-26' of ↵David S. Miller23-262/+636
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Various updates, notably: * extended key ID support (from 802.11-2016) * per-STA TX power control support * mac80211 TX performance improvements * HE (802.11ax) updates * mesh link probing support * enhancements of multi-BSSID support (also related to HE) * OWE userspace processing support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26mac80211: probe unexercised mesh linksRajkumar Manoharan4-0/+43
The requirement for mesh link metric refreshing, is that from one mesh point we be able to send some data frames to other mesh points which are not currently selected as a primary traffic path, but which are only 1 hop away. The absence of the primary path to the chosen node makes it necessary to apply some form of marking on a chosen packet stream so that the packets can be properly steered to the selected node for testing, and not by the regular mesh path lookup. Tested-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: add option for setting control flagsRajkumar Manoharan3-9/+14
Allows setting of control flags of skb cb - if needed - when calling ieee80211_subif_start_xmit(). Tested-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: Set CAN_REPLACE_PTK0 for SW crypto only driversAlexander Wetzel1-0/+7
Mac80211 SW crypto handles replacing PTK keys correctly. Don't trigger needless warnings or workarounds when the driver can only use the known good SW crypto provided by mac80211. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: Fix Extended Key ID auto activationAlexander Wetzel1-1/+5
Only enable Extended Key ID support for drivers which are not supporting crypto offload and also do not support A-MPDU. While any driver using SW crypto from mac80211 is generally able to also support Extended Key ID these drivers are likely to mix keyIDs in AMPDUs when rekeying. According to IEEE 802.11-2016 "9.7.3 A-MPDU contents" this is not allowed. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [reword comment a bit, move ! into logic expression] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26cfg80211: don't pass pointer to pointer unnecessarilyDan Carpenter1-4/+4
The cfg80211_merge_profile() and ieee802_11_find_bssid_profile() are a bit cleaner if we just pass the merged_ie pointer instead of a pointer to the pointer. This isn't a functional change, it's just a clean up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: store tx power value from user to stationAshok Raj Nagarajan4-0/+65
This patch introduce a new driver callback drv_sta_set_txpwr. This API will copy the transmit power value passed from user space and call the driver callback to set the tx power for the station. Co-developed-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Ashok Raj Nagarajan <arnagara@codeaurora.org> Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: only allocate one queue when using iTXQsJohannes Berg1-5/+5
There's no need to allocate than one queue in the iTXQs case now that we no longer use ndo_select_queue to assign the AC. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: debugfs option to force TX status framesJulius Niedworok3-0/+64
At Technical University of Munich we use MAC 802.11 TX status frames to perform several measurements in MAC 802.11 setups. With ath based drivers this was possible until commit d94a461d7a7df6 ("ath9k: use ieee80211_tx_status_noskb where possible") as the driver ignored the IEEE80211_TX_CTL_REQ_TX_STATUS flag and always delivered tx_status frames. Since that commit, this behavior was changed and the driver now adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. Due to performance reasons, IEEE80211_TX_CTL_REQ_TX_STATUS is not set for data frames from interfaces in managed mode. Hence, frames that are sent from a managed mode interface do never deliver tx_status frames. This remains true even if a monitor mode interface (the measurement interface) is added to the same ieee80211 physical device. Thus, there is no possibility for receiving tx_status frames for frames sent on an interface in managed mode, if the driver adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. In order to force delivery of tx_status frames for research and debugging purposes, implement a debugfs option force_tx_status for ieee80211 physical devices. When this option is set for a physical device, IEEE80211_TX_CTL_REQ_TX_STATUS is enabled in all packets sent from that device. This option can be set via /sys/kernel/debug/ieee80211/<dev>/force_tx_status. The default is disabled. Co-developed-by: Charlie Groh <ga58taw@mytum.de> Signed-off-by: Charlie Groh <ga58taw@mytum.de> Signed-off-by: Julius Niedworok <julius.n@gmx.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211/cfg80211: update bss channel on channel switchSergey Matyukevich1-3/+0
FullMAC STAs have no way to update bss channel after CSA channel switch completion. As a result, user-space tools may provide inconsistent channel info. For instance, consider the following two commands: $ sudo iw dev wlan0 link $ sudo iw dev wlan0 info The latter command gets channel info from the hardware, so most probably its output will be correct. However the former command gets channel info from scan cache, so its output will contain outdated channel info. In fact, current bss channel info will not be updated until the next [re-]connect. Note that mac80211 STAs have a workaround for this, but it requires access to internal cfg80211 data, see ieee80211_chswitch_work: /* XXX: shouldn't really modify cfg80211-owned data! */ ifmgd->associated->channel = sdata->csa_chandef.chan; This patch suggests to convert mac80211 workaround into cfg80211 behavior and to update current bss channel in cfg80211_ch_switch_notify. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: minstrel_ht: automatically calculate rate duration shiftFelix Fietkau1-54/+80
A per-group shift was added to reduce the size of the per-rate transmit duration field to u16 without sacrificing a lot of precision This patch changes the macros to automatically calculate the best value for this shift based on the lowest rate within the group. This simplifies adding more groups and slightly improves accuracy for some of the existing groups. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: minstrel_ht: add support for rates with 4 spatial streamsFelix Fietkau2-1/+11
This is needed for the upcoming driver for MT7615 4x4 802.11ac chipsets Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: when using iTXQ, select the queue in ieee80211_subif_start_xmitFelix Fietkau3-39/+56
When using iTXQ, the network stack does not need the real queue number, since mac80211 is using its internal queues anyway. In that case we can defer selecting the queue and remove a redundant station lookup in the tx path to save some CPU cycles. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: IEEE 802.11 Extended Key ID supportAlexander Wetzel9-60/+145
Add support for Extended Key ID as defined in IEEE 802.11-2016. - Implement the nl80211 API for Extended Key ID - Extend mac80211 API to allow drivers to support Extended Key ID - Enable Extended Key ID by default for drivers only supporting SW crypto (e.g. mac80211_hwsim) - Allow unicast Tx usage to be supressed (IEEE80211_KEY_FLAG_NO_AUTO_TX) - Select the decryption key based on the MPDU keyid - Enforce existing assumptions in the code that rekeys don't change the cipher Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [remove module parameter] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: Optimize tailroom_needed update checksAlexander Wetzel1-9/+15
Optimize/cleanup the delay tailroom checks and adds one missing tailroom update. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: set NETIF_F_LLTX when using intermediate tx queuesFelix Fietkau1-0/+1
When using iTXQ, tx sequence number allocation and statistics are run at dequeue time. Because of that, it is safe to enable NETIF_F_LLTX, which allows tx handlers to run on multiple CPUs in parallel. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: run late dequeue late tx handlers without holding fq->lockFelix Fietkau1-2/+8
Reduces lock contention on enqueue/dequeue of iTXQ packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: calculate hash for fq without holding fq->lock in itxq enqueueFelix Fietkau1-5/+10
Reduces lock contention on enqueue/dequeue of iTXQ packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: mesh: drop redundant rcu_read_lock/unlock callsFelix Fietkau2-20/+8
The callers of these functions are all within RCU locked sections Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: support profile split between elementsSara Sharon2-20/+37
Since an element is limited to 255 octets, a profile may be split split to several elements. Support the split as defined in the 11ax draft 3. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: support non-inheritance elementSara Sharon1-57/+77
Subelement profile may specify element IDs it doesn't inherit from the management frame. Support it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-38/+46
Conflict resolution of af_smc.c from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09mac80211: Honor SW_CRYPTO_CONTROL for unicast keys in AP VLAN modeAlexander Wetzel1-5/+4
Restore SW_CRYPTO_CONTROL operation on AP_VLAN interfaces for unicast keys, the original override was intended to be done for group keys as those are treated specially by mac80211 and would always have been rejected. Now the situation is that AP_VLAN support must be enabled by the driver if it can support it (meaning it can support software crypto GTK TX). Thus, also simplify the code - if we get here with AP_VLAN and non- pairwise key, software crypto must be used (driver doesn't know about the interface) and can be used (driver must've advertised AP_VLAN if it also uses SW_CRYPTO_CONTROL). Fixes: db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices") Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08mac80211: Add support for NL80211_STA_INFO_AIRTIME_LINK_METRICNarayanraddi Masti3-2/+10
Add support for mesh airtime link metric attribute NL80211_STA_INFO_AIRTIME_LINK_METRIC. Signed-off-by: Narayanraddi Masti <team.nmasti@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08mac80211: make ieee80211_schedule_txq schedule empty TXQsFelix Fietkau1-4/+6
Currently there is no way for the driver to signal to mac80211 that it should schedule a TXQ even if there are no packets on the mac80211 part of that queue. This is problematic if the driver has an internal retry queue to deal with software A-MPDU retry. This patch changes the behavior of ieee80211_schedule_txq to always schedule the queue, as its only user (ath9k) seems to expect such behavior already: it calls this function on tx status and on powersave wakeup whenever its internal retry queue is not empty. Also add an extra argument to ieee80211_return_txq to get the same behavior. This fixes an issue on ath9k where tx queues with packets to retry (and no new packets in mac80211) would not get serviced. Fixes: 89cea7493a346 ("ath9k: Switch to mac80211 TXQ scheduling and airtime APIs") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-29mac80211: rework locking for txq scheduling / airtime fairnessFelix Fietkau1-28/+16
Holding the lock around the entire duration of tx scheduling can create some nasty lock contention, especially when processing airtime information from the tx status or the rx path. Improve locking by only holding the active_txq_lock for lookups / scheduling list modifications. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-29mac80211: do not call driver wake_tx_queue op during reconfigFelix Fietkau1-0/+3
There are several scenarios in which mac80211 can call drv_wake_tx_queue after ieee80211_restart_hw has been called and has not yet completed. Driver private structs are considered uninitialized until mac80211 has uploaded the vifs, stations and keys again, so using private tx queue data during that time is not safe. The driver can also not rely on drv_reconfig_complete to figure out when it is safe to accept drv_wake_tx_queue calls again, because it is only called after all tx queues are woken again. To fix this, bail out early in drv_wake_tx_queue if local->in_reconfig is set. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-29mac80211: fix memory accounting with A-MSDU aggregationFelix Fietkau1-0/+3
skb->truesize can change due to memory reallocation or when adding extra fragments. Adjust fq->memory_usage accordingly Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-29mac80211: Increase MAX_MSG_LENAndrei Otcheretianski1-1/+6
Looks that 100 chars isn't enough for messages, as we keep getting warnings popping from different places due to message shortening. Instead of trying to shorten the prints, just increase the buffer size. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-29mac80211: fix unaligned access in mesh table hash functionFelix Fietkau1-1/+1
The pointer to the last four bytes of the address is not guaranteed to be aligned, so we need to use __get_unaligned_cpu32 here Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-29mac80211: un-schedule TXQs on powersave startFelix Fietkau1-1/+9
Once a station enters powersave, its queues should not be returned by ieee80211_next_txq() anymore. They will be re-scheduled again after the station has woken up again Fixes: 1866760096bf4 ("mac80211: Add TXQ scheduling API") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-20net: remove 'fallback' argument from dev->ndo_select_queue()Paolo Abeni1-4/+2
After the previous patch, all the callers of ndo_select_queue() provide as a 'fallback' argument netdev_pick_tx. The only exceptions are nested calls to ndo_select_queue(), which pass down the 'fallback' available in the current scope - still netdev_pick_tx. We can drop such argument and replace fallback() invocation with netdev_pick_tx(). This avoids an indirect call per xmit packet in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen) with device drivers implementing such ndo. It also clean the code a bit. Tested with ixgbe and CONFIG_FCOE=m With pktgen using queue xmit: threads vanilla patched (kpps) (kpps) 1 2334 2428 2 4166 4278 4 7895 8100 v1 -> v2: - rebased after helper's name change Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-3/+8
Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22mac80211: allocate tailroom for forwarded mesh packetsFelix Fietkau1-1/+6
Forwarded packets enter the tx path through ieee80211_add_pending_skb, which skips the ieee80211_skb_resize call. Fixes WARN_ON in ccmp_encrypt_skb and resulting packet loss. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: Use rhashtable_lookup_get_insert_fast instead of racy codeHerbert Xu1-16/+8
The code in mesh_path_add tries to handle the case where a duplicate entry is added to the rhashtable by doing a lookup after a failed insertion. It also tries to handle races by repeating the insertion should the lookup fail. This is now unnecessary as we have rhashtable API functions that can directly return the mathcing object. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg6-116/+75
Merge net-next to resolve a conflict and to get the mac80211 rhashtable fixes so further patches can be applied on top. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: update HE IEs to D3.3Liad Kaufman1-10/+25
Update element names and new fields according to D3.3 of the HE spec. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: ignore quiet mode in probeSara Sharon1-3/+3
Some buggy APs keep the CSA IE in probes after the channel switch was completed and can silence us for no good reason. Apply quiet mode only from beacons. If there is real channel switch going on, we will see the beacon anyway. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: allow CSA to self with immediate quietSara Sharon1-1/+2
Currently, due to some buggy APs that continue to include CSA IEs after the switch, we ignore CSA to same channel. However, some other APs may do CSA to self in order to have immediate quiet. Allow it. Do it only for beacons. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: notify driver on subsequent CSA beaconsSara Sharon3-14/+70
Some drivers may want to track further the CSA beacons, for example to compensate for buggy APs that change the beacon count or quiet mode during CSA flow. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: fix position of vendor_data readLiad Kaufman1-2/+19
The ieee80211_vendor_radiotap was read from the beginning of the skb->data regardless of the existence of other elements in radiotap that would cause it to move to another position. Fix this by taking into account where it really should be. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: abort CSA if beacon does not include CSA IEsSara Sharon3-6/+57
In case we receive a beacon without CSA IE while we are in the middle of channel switch - abort the operation. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: support max channel switch time elementSara Sharon4-0/+13
2018 REVmd of the spec introduces the max channel switch time element which is optionally included in beacons/probes when there is a channel switch / extended channel switch element. The value represents the maximum delay between the time the AP transmitted the last beacon in current channel and the expected time of the first beacon in the new channel, in TU. Parse the value and pass it to the driver. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: Report Association Request frame IEs in association eventsJouni Malinen2-2/+18
This extends the NL80211_CMD_ASSOCIATE event case to report NL80211_ATTR_REQ_IE similarly to what is already done with the NL80211_CMD_CONNECT events if the driver provides this information. In practice, this adds (Re)Association Request frame information element reporting to mac80211 drivers for the cases where user space SME is used. This provides more information for user space to figure out which capabilities were negotiated for the association. For example, this can be used to determine whether HT, VHT, or HE is used. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: Change default tx_sk_pacing_shift to 7Toke Høiland-Jørgensen1-2/+2
When we did the original tests for the optimal value of sk_pacing_shift, we came up with 6 ms of buffering as the default. Sadly, 6 is not a power of two, so when picking the shift value I erred on the size of less buffering and picked 4 ms instead of 8. This was probably wrong; those 2 ms of extra buffering makes a larger difference than I thought. So, change the default pacing shift to 7, which corresponds to 8 ms of buffering. The point of diminishing returns really kicks in after 8 ms, and so having this as a default should cut down on the need for extensive per-device testing and overrides needed in the drivers. Cc: stable@vger.kernel.org Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-111/+58
Two easily resolvable overlapping change conflicts, one in TCP and one in the eBPF verifier. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18mac80211: mesh: fix missing unlock on error in table_path_del()Wei Yongjun1-1/+1
spin_lock_bh() is used in table_path_del() but rcu_read_unlock() is used for unlocking. Fix it by using spin_unlock_bh() instead of rcu_read_unlock() in the error handling case. Fixes: b4c3fbe63601 ("mac80211: Use linked list instead of rhashtable walk for mesh tables") Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+8
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15mac80211: Restore vif beacon interval if start ap failsRakesh Pillai1-1/+5
The starting of AP interface can fail due to invalid beacon interval, which does not match the minimum gcd requirement set by the wifi driver. In such case, the beacon interval of that interface gets updated with that invalid beacon interval. The next time that interface is brought up in AP mode, an interface combination check is performed and the beacon interval is taken from the previously set value. In a case where an invalid beacon interval, i.e. a beacon interval value which does not satisfy the minimum gcd criteria set by the driver, is set, all the subsequent trials to bring that interface in AP mode will fail, even if the subsequent trials have a valid beacon interval. To avoid this, in case of a failure in bringing up an interface in AP mode due to interface combination error, the interface beacon interval which is stored in bss conf, needs to be restored with the last working value of beacon interval. Tested on ath10k using WCN3990. Cc: stable@vger.kernel.org Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-15mac80211: Free mpath object when rhashtable insertion failsHerbert Xu1-8/+9
When rhashtable insertion fails the mesh table code doesn't free the now-orphan mesh path object. This patch fixes that. Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 10:16:05 +0000