summaryrefslogtreecommitdiffstats
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2022-04-11mac80211: fix ht_capa printout in debugfsBen Greear1-1/+1
Don't use sizeof(pointer) when calculating scnprintf offset. Fixes: 01f84f0ed3b4 ("mac80211: reduce stack usage in debugfs") Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20220406175659.20611-1-greearb@candelatech.com [correct the Fixes tag] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-15mac80211: update bssid_indicator in ieee80211_assign_beaconLorenzo Bianconi1-0/+3
Update bssid_indicator in ieee80211_bss_conf according to the number of bssid in the set. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/f92317e002fca9933f05a445fcefb4f53291d601.1645702516.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-15mac80211: MBSSID channel switchJohn Crispin1-2/+24
Trigger ieee80211_csa_finish() on the non-transmitting interfaces when channel switch concludes on the transmitting interface. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/6fde4d7f9fa387494f46a7aa4a584478dcda06f1.1645702516.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-15mac80211: MBSSID beacon handling in AP modeLorenzo Bianconi3-14/+124
Add new fields in struct beacon_data to store all MBSSID elements. Generate a beacon template which includes all MBSSID elements. Move CSA offset to reflect the MBSSID element length. Co-developed-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Co-developed-by: John Crispin <john@phrozen.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Money Wang <money.wang@mediatek.com> Link: https://lore.kernel.org/r/5322db3c303f431adaf191ab31c45e151dde5465.1645702516.git.lorenzo@kernel.org [small cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-15mac80211: always have ieee80211_sta_restart()Johannes Berg1-1/+1
When CONFIG_PM isn't defined we don't have the function ieee80211_sta_restart() compiled in, but we always need it now for firmware restart. Move it out of the ifdef. Fixes: 7d352ccf1e99 ("mac80211: Add support to trigger sta disconnect on hardware restart") Link: https://lore.kernel.org/r/20220312221957.1fa96c72db51.I8ecaa5f9402fede0272161e0531ab930b97fba3e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-11Merge tag 'wireless-next-2022-03-11' of ↵Jakub Kicinski12-79/+571
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== brcmfmac * add BCM43454/6 support rtw89 * add support for 160 MHz channels and 6 GHz band * hardware scan support iwlwifi * support UHB TAS enablement via BIOS * remove a bunch of W=1 warnings * add support for channel switch offload * support 32 Rx AMPDU sessions in newer devices * add support for a couple of new devices * add support for band disablement via BIOS mt76 * mt7915 thermal management improvements * SAR support for more mt76 drivers * mt7986 wmac support on mt7915 ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band ath6kl * add device ID for WLU5150-D81 cfg80211/mac80211 * initial EHT (from 802.11be) support (EHT rates, 320 MHz, larger block-ack) * support disconnect on HW restart * tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits) mac80211: Add support to trigger sta disconnect on hardware restart mac80211: fix potential double free on mesh join mac80211: correct legacy rates check in ieee80211_calc_rx_airtime nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE rtw89: 8852c: process logic efuse map rtw89: 8852c: process efuse of phycap rtw89: support DAV efuse reading operation rtw89: 8852c: add chip::dle_mem rtw89: add page_regs to handle v1 chips rtw89: add chip_info::{h2c,c2h}_reg to support more chips rtw89: add hci_func_en_addr to support variant generation rtw89: add power_{on/off}_func rtw89: read chip version depends on chip ID rtw89: pci: use a struct to describe all registers address related to DMA channel rtw89: pci: add V1 of PCI channel address rtw89: pci: add struct rtw89_pci_info rtw89: 8852c: add 8852c empty files MAINTAINERS: add devicetree bindings entry for mt76 ... ==================== Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11mac80211: Add support to trigger sta disconnect on hardware restartYoughandhar Chintala3-3/+45
Currently in case of target hardware restart, we just reconfig and re-enable the security keys and enable the network queues to start data traffic back from where it was interrupted. Many ath10k wifi chipsets have sequence numbers for the data packets assigned by firmware and the mac sequence number will restart from zero after target hardware restart leading to mismatch in the sequence number expected by the remote peer vs the sequence number of the frame sent by the target firmware. This mismatch in sequence number will cause out-of-order packets on the remote peer and all the frames sent by the device are dropped until we reach the sequence number which was sent before we restarted the target hardware In order to fix this, we trigger a sta disconnect, in case of target hw restart. After this there will be a fresh connection and thereby avoiding the dropping of frames by remote peer. The right fix would be to pull the entire data path into the host which is not feasible or would need lots of complex changes and will still be inefficient. Tested on ath10k using WCN3990, QCA6174 Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org> Link: https://lore.kernel.org/r/20220308115325.5246-2-youghand@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-11mac80211: fix potential double free on mesh joinLinus Lüssing1-3/+0
While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling: $ iw dev mesh0 mesh leave $ iw dev mesh0 mesh join my-mesh Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too. The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211. Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE. Cc: stable@vger.kernel.org Fixes: 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") Reported-by: Matthias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Tested-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Link: https://lore.kernel.org/r/20220310183513.28589-1-linus.luessing@c0d3.blue Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-11mac80211: correct legacy rates check in ieee80211_calc_rx_airtimeMeiChia Chiu1-1/+3
There are no legacy rates on 60GHz or sub-1GHz band, so modify the check. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Link: https://lore.kernel.org/r/20220308021645.16272-1-MeiChia.Chiu@mediatek.com [Ghz -> GHz] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-11mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possibleChristophe JAILLET1-1/+1
Previous memory allocations in this function already use GFP_KERNEL, so use __dev_alloc_skb() and an explicit GFP_KERNEL instead of an implicit GFP_ATOMIC. This gives more opportunities of successful allocation. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/194a0e2ff00c3fae88cc9fba47431747360c8242.1645345378.git.christophe.jaillet@wanadoo.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-15/+27
net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-01mac80211: treat some SAE auth steps as finalJohannes Berg2-5/+13
When we get anti-clogging token required (added by the commit mentioned below), or the other status codes added by the later commit 4e56cde15f7d ("mac80211: Handle special status codes in SAE commit") we currently just pretend (towards the internal state machine of authentication) that we didn't receive anything. This has the undesirable consequence of retransmitting the prior frame, which is not expected, because the timer is still armed. If we just disarm the timer at that point, it would result in the undesirable side effect of being in this state indefinitely if userspace crashes, or so. So to fix this, reset the timer and set a new auth_data->waiting in order to have no more retransmissions, but to have the data destroyed when the timer actually fires, which will only happen if userspace didn't continue (i.e. crashed or abandoned it.) Fixes: a4055e74a2ff ("mac80211: Don't destroy auth data in case of anti-clogging") Reported-by: Jouni Malinen <j@w1.fi> Link: https://lore.kernel.org/r/20220224103932.75964e1d7932.Ia487f91556f29daae734bf61f8181404642e1eec@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-8/+21
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16mac80211: parse AddBA request with extended AddBA elementMordechay Goodstein1-3/+15
In EHT requesting aggregation with 1K needs the use of extended the AddBA element for the buffer size, so add the logic to parse it and make sure it's in limits of the EHT aggregation size. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20220214173004.8209cae9d9e4.I434f5588602f83b4e658c660120040913b3a2e3d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: calculate max RX NSS for EHT modeMordechay Goodstein1-1/+13
If the station supports EHT mode, calculate the maximum RX NSS from EHT station capabilities. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20220214173004.cf61972c8919.I54f5a416f0789bf4eefad04703d941b6755f6dd6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: Add support for storing station EHT capabilitiesIlan Peer1-0/+8
When a station configuration is updated, also update the station EHT capabilities. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.47213ffb23a8.I15c6c8430e1a0184b1322e40f1727ed4f17b04e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: Handle station association response with EHTIlan Peer5-3/+114
When the association is an EHT association, parse the EHT element from the association response and update the station's EHT capabilities accordingly. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.f33574718755.I21182234c5303d9423eabd5eb997e7cf75f8e0c8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: Add EHT capabilities to association/probe requestIlan Peer4-2/+144
Add the EHT capabilities element to both probe request and association request frames, if advertised by the driver. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.2ec94388acee.I40d2ef06099cb091e9c2c01f8ef521b993a3d559@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: Add initial support for EHT and 320 MHz channelsIlan Peer6-59/+209
Add initial support for EHT and 320 MHz bandwidth in mac80211. As a new IEEE80211_STA_RX_BW_320 is added to enum ieee80211_sta_rx_bandwidth, update the drivers to avoid compilation warnings. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.0f144cc0bba6.Iad18111264da87eed5fd7b017f0cc6e58c604e07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: Support parsing EHT elementsIlan Peer2-0/+14
Parse the new EHT elements in the element parsing utilities. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.4d52ddaf1af4.Ib6beb1aa85e25b71ce40d3260b2e5b117cc42308@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16ieee80211: add EHT 1K aggregation definitionsMordechay Goodstein1-1/+1
We add the fields for parsing extended ADDBA request/respond, and new max 1K aggregation for limit ADDBA request/respond. Adjust drivers to use the proper macro, IEEE80211_MAX_AMPDU_BUF -> IEEE80211_MAX_AMPDU_BUF_HE. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20220214173004.b8b447ce95b7.I0ee2554c94e89abc7a752b0f7cc7fd79c273efea@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: parse only HE capability elements with valid sizeJohannes Berg1-2/+4
The code validates the HE capability element size later, but slightly wrong, so use the new helper to do it right and only accept it if it has a good size. Link: https://lore.kernel.org/r/20220214172920.b5b06f264a61.I645ac1e2dc0ace223ef3e551cd5a71c88bd55e04@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: fix forwarded mesh frames AC & queue selectionNicolas Escande1-2/+2
There are two problems with the current code that have been highlighted with the AQL feature that is now enbaled by default. First problem is in ieee80211_rx_h_mesh_fwding(), ieee80211_select_queue_80211() is used on received packets to choose the sending AC queue of the forwarding packet although this function should only be called on TX packet (it uses ieee80211_tx_info). This ends with forwarded mesh packets been sent on unrelated random AC queue. To fix that, AC queue can directly be infered from skb->priority which has been extracted from QOS info (see ieee80211_parse_qos()). Second problem is the value of queue_mapping set on forwarded mesh frames via skb_set_queue_mapping() is not the AC of the packet but a hardware queue index. This may or may not work depending on AC to HW queue mapping which is driver specific. Both of these issues lead to improper AC selection while forwarding mesh packets but more importantly due to improper airtime accounting (which is done on a per STA, per AC basis) caused traffic stall with the introduction of AQL. Fixes: cf44012810cc ("mac80211: fix unnecessary frame drops in mesh fwding") Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping") Co-developed-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Link: https://lore.kernel.org/r/20220214173214.368862-1-nico.escande@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: refuse aggregations sessions before authorizedJohannes Berg1-1/+9
If an MFP station isn't authorized, the receiver will (or at least should) drop the action frame since it's a robust management frame, but if we're not authorized we haven't installed keys yet. Refuse attempts to start a session as they'd just time out. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220203201528.ff4d5679dce9.I34bb1f2bc341e161af2d6faf74f91b332ba11285@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: fix EAPoL rekey fail in 802.3 rx pathDeren Wu1-7/+3
mac80211 set capability NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211 to upper layer by default. That means we should pass EAPoL packets through nl80211 path only, and should not send the EAPoL skb to netdevice diretly. At the meanwhile, wpa_supplicant would not register sock to listen EAPoL skb on the netdevice. However, there is no control_port_protocol handler in mac80211 for 802.3 RX packets, mac80211 driver would pass up the EAPoL rekey frame to netdevice and wpa_supplicant would be never interactive with this kind of packets, if SUPPORTS_RX_DECAP_OFFLOAD is enabled. This causes STA always rekey fail if EAPoL frame go through 802.3 path. To avoid this problem, align the same process as 802.11 type to handle this frame before put it into network stack. This also addresses a potential security issue in 802.3 RX mode that was previously fixed in commit a8c4d76a8dd4 ("mac80211: do not accept/forward invalid EAPOL frames"). Cc: stable@vger.kernel.org # 5.12+ Fixes: 80a915ec4427 ("mac80211: add rx decapsulation offload support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Link: https://lore.kernel.org/r/6889c9fced5859ebb088564035f84fd0fa792a49.1644680751.git.deren.wu@mediatek.com [fix typos, update comment and add note about security issue] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: Remove redundent assignment channel_typeJiapeng Chong1-1/+0
Fix the following coccicheck warnings: net/mac80211/util.c:3265:3: warning: Value stored to 'channel_type' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220113161557.129427-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: remove useless ieee80211_vif_is_mesh() checkBaligh Gasmi1-2/+1
We check ieee80211_vif_is_mesh() at the top if() block, there's no need to check for it again. Signed-off-by: Baligh Gasmi <gasmibal@gmail.com> Link: https://lore.kernel.org/r/20220203153035.198697-1-gasmibal@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: fix struct ieee80211_tx_info sizeAvraham Stern1-4/+8
The size of the status_driver_data field was not adjusted when the is_valid_ack_signal field was added. Since the size of struct ieee80211_tx_info is limited, replace the is_valid_ack_signal field with a flags field, and adjust the struct size accordingly. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.0ff363d4fa56.I45792c0187034a6d0e1c99a7db741996ef7caba3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: mlme: validate peer HE supported ratesMordechay Goodstein1-1/+100
We validate that AP has mandatory rates set in HE capabilities. Also we make sure AP is consistent with itself on rates set in HE basic rates required joining the BSS and rates set in HE capabilities. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.7023450fdf16.I194df59252097ba25a0a543456d4350f1607a538@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: remove unused macrosJohannes Berg6-13/+7
Various macros in mac80211 aren't used, remove them. In one case it's used under ifdef, so ifdef it for the W=2 warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.5172d7fd878e.I2f1fce686a2b71003f083b2566fb09cf16b8165a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: airtime: avoid variable shadowingJohannes Berg1-2/+3
This isn't very dangerous, since the outer 'rate' variable isn't even a pointer, but it's still confusing, so use a different variable inside. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.8e9b2bfaa0f5.I41c53f754eef28206d04dafc7263ccb99b63d490@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: mlme: add documentation from spec to codeMordechay Goodstein1-1/+9
Reference the spec why we decline HE support in case STA don't support all HE basic rates recurred by AP. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.f1bafd0861b7.I566612d99bca5245dc06cbcc70369b94a525389c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: vht: use HE macros for parsing HE capabilitiesMordechay Goodstein1-2/+2
IEEE80211_VHT_MCS_NOT_SUPPORTED and IEEE80211_HE_MCS_NOT_SUPPORTED have the same value so no real bug, but for code integrity use the HE macros for parsing HE capabilities. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.e974b7b3b217.I732cc7f770c7fa06e4840adb5d45d7ee99ac8eb5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04cfg80211/mac80211: assume CHECKSUM_COMPLETE includes SNAPJohannes Berg1-0/+2
There's currently only one driver that reports CHECKSUM_COMPLETE, that is iwlwifi. The current hardware there calculates checksum after the SNAP header, but only RFC 1042 (and some other cases, but replicating the exact hardware logic for corner cases in the driver seemed awkward.) Newer generations of hardware will checksum _including_ the SNAP, which makes things easier. To handle that, simply always assume the checksum _includes_ the SNAP header, which this patch does, requiring to first add it for older iwlwifi hardware, and then remove it again later on conversion. Alternatively, we could have: 1) Always assumed the checksum starts _after_ the SNAP header; the problem with this is that we'd have to replace the exact "what is the SNAP" check in iwlwifi that cfg80211 has. 2) Made it configurable with some flag, but that seemed like too much complexity. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.230736e19e0e.I3e6745873585ad943c152fab9e23b5221f17a95f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: consider RX NSS in UHB connectionMordechay Goodstein1-3/+58
In UHB connection we don't have any HT/VHT elemens so in order to calculate the max RX-NSS we need also to look at HE capa element, this causes to limit us to max rx nss in UHB to 1. Also anyway we need to look at HE max rx NSS and not only at HT/VHT capa to determine the max rx nss over the connection. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.3713e0dea5dd.I3b9a15b4c53465c3f86f35459e9dc15ae4ea2abd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: limit bandwidth in HE capabilitiesJohannes Berg4-10/+32
If we're limiting bandwidth for some reason such as regulatory restrictions, then advertise that limitation just like we do for VHT today, so the AP is aware we cannot use the higher BW it might be using. Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.70c8e3e7ee76.If317630de69ff1146bec7d47f5b83038695eb71d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-31mac80211: mlme: check for null after calling kmemdupJiasheng Jiang1-8/+21
As the possible failure of the alloc, the ifmgd->assoc_req_ies might be NULL pointer returned from kmemdup(). Therefore it might be better to free the skb and return error in order to fail the association, like ieee80211_assoc_success(). Also, the caller, ieee80211_do_assoc(), needs to deal with the return value from ieee80211_send_assoc(). Fixes: 4d9ec73d2b78 ("cfg80211: Report Association Request frame IEs in association events") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220105081559.2387083-1-jiasheng@iscas.ac.cn [fix some paths to be errors, not success] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-82/+55
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-04mac80211: use ieee80211_bss_get_elem()Johannes Berg1-7/+7
Instead of ieee80211_bss_get_ie(), use the more typed ieee80211_bss_get_elem(). Link: https://lore.kernel.org/r/20211220113609.56f8e2a70152.Id5a56afb8a4f9b38d10445e5a1874e93e84b5251@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-04mac80211: Add stations iterator where the iterator function may sleepMartin Blumenstingl1-0/+13
ieee80211_iterate_active_interfaces() and ieee80211_iterate_active_interfaces_atomic() already exist, where the former allows the iterator function to sleep. Add ieee80211_iterate_stations() which is similar to ieee80211_iterate_stations_atomic() but allows the iterator to sleep. This is needed for adding SDIO support to the rtw88 driver. Some interators there are reading or writing registers. With the SDIO ops (sdio_readb, sdio_writeb and friends) this means that the iterator function may sleep. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211228211501.468981-2-martin.blumenstingl@googlemail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-04mac80211: allow non-standard VHT MCS-10/11Ping-Ke Shih1-1/+1
Some AP can possibly try non-standard VHT rate and mac80211 warns and drops packets, and leads low TCP throughput. Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2 WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021 Since commit c27aa56a72b8 ("cfg80211: add VHT rate entries for MCS-10 and MCS-11") has added, mac80211 adds this support as well. After this patch, throughput is good and iw can get the bitrate: rx bitrate: 975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2 or rx bitrate: 1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2 Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891 Reported-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/20220103013623.17052-1-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-04mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_meshPavel Skripkin3-81/+54
Syzbot hit NULL deref in rhashtable_free_and_destroy(). The problem was in mesh_paths and mpp_paths being NULL. mesh_pathtbl_init() could fail in case of memory allocation failure, but nobody cared, since ieee80211_mesh_init_sdata() returns void. It led to leaving 2 pointers as NULL. Syzbot has found null deref on exit path, but it could happen anywhere else, because code assumes these pointers are valid. Since all ieee80211_*_setup_sdata functions are void and do not fail, let's embedd mesh_paths and mpp_paths into parent struct to avoid adding error handling on higher levels and follow the pattern of others setup_sdata functions Fixes: 60854fd94573 ("mac80211: mesh: convert path table to rhashtable") Reported-and-tested-by: syzbot+860268315ba86ea6b96b@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20211230195547.23977-1-paskripkin@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-04mac80211: initialize variable have_higher_than_11mbitTom Rix1-1/+1
Clang static analysis reports this warnings mlme.c:5332:7: warning: Branch condition evaluates to a garbage value have_higher_than_11mbit) ^~~~~~~~~~~~~~~~~~~~~~~ have_higher_than_11mbit is only set to true some of the time in ieee80211_get_rates() but is checked all of the time. So have_higher_than_11mbit needs to be initialized to false. Fixes: 5d6a1b069b7f ("mac80211: set basic rates earlier") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+3
include/net/sock.h commit 8f905c0e7354 ("inet: fully convert sk->sk_rx_dst to RCU rules") commit 43f51df41729 ("net: move early demux fields close to sk_refcnt") https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-21Merge tag 'mac80211-next-for-net-next-2021-12-21' of ↵Jakub Kicinski12-42/+191
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * ndo_fill_forward_path support in mac80211, to let drivers use it * association comeback notification for userspace, to be able to react more sensibly to long delays * support for background radar detection hardware in some chipsets * SA Query Procedures offload on the AP side * more logging if we find problems with HT/VHT/HE * various cleanups and minor fixes Conflicts: net/wireless/reg.c: e08ebd6d7b90 ("cfg80211: Acquire wiphy mutex on regulatory work") 701fdfe348f7 ("cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface") https://lore.kernel.org/r/20211221111950.57ecc6a7@canb.auug.org.au drivers/net/wireless/ath/ath10k/wmi.c: 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel") 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel") https://lore.kernel.org/r/20211221115004.1cd6b262@canb.auug.org.au * tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (32 commits) cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface rfkill: allow to get the software rfkill state cfg80211: refactor cfg80211_get_ies_channel_number() nl82011: clarify interface combinations wrt. channels nl80211: Add support to offload SA Query procedures for AP SME device nl80211: Add support to set AP settings flags with single attribute mac80211: add more HT/VHT/HE state logging cfg80211: Use the HE operation IE to determine a 6GHz BSS channel cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard mac80211: Notify cfg80211 about association comeback cfg80211: Add support for notifying association comeback mac80211: introduce channel switch disconnect function cfg80211: Fix order of enum nl80211_band_iftype_attr documentation cfg80211: simplify cfg80211_chandef_valid() mac80211: Remove a couple of obsolete TODO mac80211: fix FEC flag in radio tap header mac80211: use coarse boottime for airtime fairness code ieee80211: change HE nominal packet padding value defines cfg80211: use ieee80211_bss_get_elem() instead of _get_ie() mac80211: Use memset_after() to clear tx status ... ==================== Link: https://lore.kernel.org/r/20211221112532.28708-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20mac80211: fix locking in ieee80211_start_ap error pathJohannes Berg1-0/+3
We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it. Cc: stable@vger.kernel.org Fixes: 295b02c4be74 ("mac80211: Add FILS discovery support") Reported-and-tested-by: syzbot+11c342e5e30e9539cabd@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211220090836.cee3d59a1915.I36bba9b79dc2ff4d57c3c7aa30dff9a003fe8c5c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20mac80211: add more HT/VHT/HE state loggingJohannes Berg1-12/+33
Add more logging in places that affect HT/VHT/HE state, so things get easier to debug. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211130131608.ac51d574458c.If197b45c5b31d2fbd254fa12c2d7c736f304d4ae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: rename offchannel_chain structs to background_chain to avoid ↵Lorenzo Bianconi1-5/+5
confusion with ETSI standard ETSI standard defines "Offchannel CAC" as: "Off-Channel CAC is performed by a number of non-continuous checks spread over a period in time. This period, which is required to determine the presence of radar signals, is defined as the Off-Channel CAC Time.. Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time 4 hours..". mac80211 implementation refers to a dedicated hw chain used for continuous radar monitoring. Rename offchannel_* references to background_* in order to avoid confusion with ETSI standard. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20mac80211: Notify cfg80211 about association comebackIlan Peer1-0/+4
Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.d76eac9e51ee.I986cffab95d51adfee6d84964711644392005113@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20mac80211: introduce channel switch disconnect functionNathan Errera1-1/+13
Introduce a disconnect function that can be used when a channel switch error occurs. The channel switch can request to block the tx, and so, we need to make sure we do not send a deauth frame in this case. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.cd2a615a0702.I9edb14785586344af17644b610ab5be109dcef00@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 09:09:03 +0000