summaryrefslogtreecommitdiffstats
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2012-08-02Merge branch 'for-john' of ↵John W. Linville3-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2012-08-01mac80211: cancel mesh path timerJohannes Berg1-0/+1
The mesh path timer needs to be canceled when leaving the mesh as otherwise it could fire after the interface has been removed already. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-01mac80211: clear timer bits when disconnectingJohannes Berg2-0/+4
There's a corner case that can happen when we suspend with a timer running, then resume and disconnect. If we connect again, suspend and resume we might start timers that shouldn't be running. Reset the timer flags to avoid this. This affects both mesh and managed modes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-30mac80211: don't clear sched_scan_sdata on sched scan stop requestEliad Peller1-1/+0
ieee80211_request_sched_scan_stop() cleared local->sched_scan_sdata. However, sched_scan_sdata should be cleared only after the driver calls ieee80211_sched_scan_stopped() (like with normal hw scan). Clearing sched_scan_sdata too early caused ieee80211_sched_scan_stopped_work to exit prematurely without properly cleaning all the sched scan resources and without calling cfg80211_sched_scan_stopped (so userspace wasn't notified about sched scan completion). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-30Merge remote-tracking branch 'wireless/master' into mac80211Johannes Berg40-2002/+2150
2012-07-26Merge branch 'for-3.6-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu. * 'for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (50 commits) leds-lp8788: forgotten unlock at lp8788_led_work LEDS: propagate error codes in blinkm_detect() LEDS: memory leak in blinkm_led_common_set() leds: add new lp8788 led driver LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS leds: max8997: Simplify max8997_led_set_mode implementation leds/leds-s3c24xx: use devm_gpio_request leds: convert Network Space v2 LED driver to devm_kzalloc() and cleanup error exit path leds: convert DAC124S085 LED driver to devm_kzalloc() leds: convert LM3530 LED driver to devm_kzalloc() and cleanup error exit path leds: convert TCA6507 LED driver to devm_kzalloc() leds: convert Freescale MC13783 LED driver to devm_kzalloc() and cleanup error exit path leds: convert ADP5520 LED driver to devm_kzalloc() and cleanup error exit path leds: convert PCA955x LED driver to devm_kzalloc() and cleanup error exit path leds: convert Sun Fire LED driver to devm_kzalloc() and cleanup error exit path leds: convert PCA9532 LED driver to devm_kzalloc() leds: convert LT3593 LED driver to devm_kzalloc() leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path leds: convert LP5523 LED driver to devm_kzalloc() and cleanup error exit path leds: convert PCA9633 LED driver to devm_kzalloc() ...
2012-07-24mac80211: fix scan_sdata assignmentJohannes Berg1-1/+1
We need to use RCU to assign scan_sdata. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-24leds: Rename led_brightness_set() to led_set_brightness()Shuah Khan1-1/+1
Rename leds external interface led_brightness_set() to led_set_brightness(). This is the second phase of the change to reduce confusion between the leds internal and external interfaces that set brightness. With this change, now the external interface is led_set_brightness(). The first phase renamed the internal interface led_set_brightness() to __led_set_brightness(). There are no changes to the interface implementations. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-20Merge branch 'master' of ↵John W. Linville16-227/+250
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-07-19Merge branch 'for-john' of ↵John W. Linville1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-07-18mac80211: flush stations before stop beaconingEliad Peller1-0/+1
When AP interface is going down, the stations are flushed (in ieee80211_do_stop()) only after the beaconing was stopped. However, drivers might rely on stations being removed before the beaconing was stopped, in order to clean up properly. Fix it by flushing the stations on ap stop. (we already do the same for other interface types, e.g. in ieee80211_set_disassoc()) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17Merge branch 'master' of ↵John W. Linville1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-07-17Merge branch 'for-john' of ↵John W. Linville5-20/+36
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-07-17mac80211: go out of PS before sending disassocEliad Peller1-6/+11
on disassoc, ieee80211_set_disassoc() goes out of PS before indicating BSS_CHANGED_ASSOC (not sure why this is needed, but some drivers might count on the current behavior). However, it does it after sending the disassoc frame, which results in null-data frame being sent (in order to go out of ps) after we were already sent the disassoc, which is invalid. Fix it by going out of ps before sending the disassoc. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17mac80211: fix tx-mgmt cookie value being left uninitializedNicolas Cavallari1-0/+1
commit "mac80211: unify SW/offload remain-on-channel" moved the cookie assignment from ieee80211_mgmt_tx() to ieee80211_start_roc_work(). But the latter is only called where offchannel is needed. If offchannel isn't needed/used, a uninitialized cookie value would be returned to userspace. This patch sets the cookie value when offchannel isn't used. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13cfg80211/mac80211: re-add get_channel operationJohannes Berg1-0/+11
This essentially reverts commit 2e165b818456 but introduces the get_channel operation with a new wireless_dev argument so that you can retrieve the channel per interface. This is necessary as even though we can track all interface channels (except monitor) we can't track the channel type used. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13Revert "mac80211: refactor virtual monitor code"Johannes Berg3-17/+14
This reverts commit 870d37fc22f3e40f9f23e06c581c8538fc16a2f0. This code doesn't work as cfg80211 will call set_monitor_enabled at the wrong time and it doesn't seem to be possible to fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13mac80211: fix use after freeAlan Cox1-2/+4
roc is destroyed then roc->started is referenced. Keep a local cache. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12Merge branch 'for-john' of ↵John W. Linville16-206/+209
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/iwmc3200wifi/cfg80211.c drivers/net/wireless/mwifiex/cfg80211.c
2012-07-12Merge branch 'master' of ↵John W. Linville11-194/+258
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-07-12mac80211: iterate the virtual monitor interfaceJohannes Berg2-10/+28
If the virtual monitor interface is requested by the driver, it should also be iterated over when the driver wants to iterate all active interfaces. To allow that protect it with the iflist_mtx. Change-Id: I58ac5de2f4ce93d12c5a98ecd2859f60158d5d69 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12minstrel_ht: enable frame aggregation for fixed rateSylvain Roger Rieunier1-2/+6
When sample_idx is set to a value other than -1 it activates the IEEE80211_TX_CTL_RATE_CTRL_PROBE flag which disables frame aggregation. To allow frame aggregation during fixed rate it is necessary to set max_tp_rate, max_tp_rate2 and max_prob_rate instead of sample_idx. Signed-off-by: Sylvain Roger Rieunier <sylvain.roger.rieunier@gmail.com> [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: tx: do not drop non-robust mgmt to non-MFP stas.Nicolas Cavallari1-0/+3
When drop_unencrypted is enabled and MFP is disabled, non-robust management frames for not-yet associated STA are dropped. This isn't visible as many management frames sent from the kernel have TX_INTFL_DONT_ENCRYPT set and management frames injected from a monitor vif have TX_CTL_INJECTED so aren't dropped. But management frames sent from userspace via NL80211_CMD_FRAME do not have this flag set, so are dropped. This patch make it always accept non-robust management frames. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: restructure key selectionJohannes Berg1-9/+13
The "no key" case in key selection that decides whether to drop the frame or not is impossible to understand, restructure the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> [cavallar@lri.fr: removed blank line and restructured action frame clause] Signed-off-by: Nicolas Cavallari <cavallar@lri.fr>
2012-07-12mac80211: add time synchronisation with BSS for assocJohannes Berg4-10/+16
Some drivers (iwlegacy, iwlwifi and rt2x00) today use the bss_conf.last_tsf value. By itself though that value is completely worthless since it may be ancient. What really is needed is synchronisation between some device time and the TSF. To clarify this, rename bss_conf.last_tsf to sync_tsf and add sync_device_ts which is obtained from rx_status which gets a new field device_timestamp for this purpose. This is intentionally not using the mactime field since that is used for other things and in IBSS is expected to sync with the IBSS's TSF which isn't necessarily true for the device timestamp. Also, since we have the information and it's useful even before the connection has been established, give all the timing details to the driver before authenticating. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: redesign scan RXJohannes Berg4-80/+32
Scan receive is rather inefficient when there are multiple virtual interfaces. We iterate all of the virtual interfaces and then notify cfg80211 about each beacon many times. Redesign scan RX to happen before everything else. Then we can also get rid of IEEE80211_RX_IN_SCAN since we don't have to accept frames into the RX handlers for scanning or scheduled scanning any more. Overall, this simplifies the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: track scheduled scan virtual interfaceJohannes Berg4-14/+15
Instead of tracking whether or not we're in a scheduled scan, track the virtual interface (sdata) in an RCU-protected pointer to make it usable from RX to check the MAC address. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: make scan_sdata pointer usable with RCUJohannes Berg3-14/+30
Making the scan_sdata pointer usable with RCU makes it possible to dereference it in the RX path to see if a received frame actually matches the interface that is scanning. This is just preparations, making the pointer __rcu. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: fix invalid band deref building preq IEsArik Nemtsov2-0/+5
The function building probe-request IEs does not validate the band is supported before dereferencing it. This can result in a panic when all bands are traversed, as done during sched-scan start. Warn when this happens and return an empty probe request. Also fix sched-scan to not waste memory on unsupported bands. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12nl80211: move scan API to wdevJohannes Berg1-2/+3
The new P2P Device will have to be able to scan for P2P search, so move scanning to use struct wireless_dev instead of struct net_device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12cfg80211: use wireless_dev for interface managementJohannes Berg3-14/+14
In order to be able to create P2P Device wdevs, move the virtual interface management over to wireless_dev structures. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-11mac80211: Fix the Problem of Unreachable Mesh STA from DSChun-Yeow Yeoh1-0/+3
This patch fixes the problem of unreachable mesh STA from Distribution System (DS) due to the introduction of previous patch solving the mesh STA joining from one MBSS to another MBSS. Reported-by: Georgiewskiy Yuriy <bottleman@icf.org.ru> Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-5/+3
Conflicts: net/batman-adv/bridge_loop_avoidance.c net/batman-adv/bridge_loop_avoidance.h net/batman-adv/soft-interface.c net/mac80211/mlme.c With merge help from Antonio Quartulli (batman-adv) and Stephen Rothwell (drivers/net/usb/qmi_wwan.c). The net/mac80211/mlme.c conflict seemed easy enough, accounting for a conversion to some new tracing macros. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings5-8/+12
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10mac80211: fix read outside array boundsChristian Lamparter1-1/+1
ieee802_1d_to_ac is defined as a const int[8], but the tid parameter has a range from 0 to 15. Cc: stable@vger.kernel.org Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-nextJohn W. Linville11-194/+258
2012-07-09Merge branch 'master' of ↵John W. Linville3-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/mlme.c
2012-07-09mac80211: destroy assoc_data correctly if assoc failsEliad Peller1-4/+2
If association failed due to internal error (e.g. no supported rates IE), we call ieee80211_destroy_assoc_data() with assoc=true, while we actually reject the association. This results in the BSSID not being zeroed out. After passing assoc=false, we no longer have to call sta_info_destroy_addr() explicitly. While on it, move the "associated" message after the assoc_success check. Cc: stable@vger.kernel.org [3.4+] Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09mac80211: correct size the argument to kzalloc in minstrel_htThomas Huehn1-1/+1
msp has type struct minstrel_ht_sta_priv not struct minstrel_ht_sta. (This incorporates the fixup originally posted as "mac80211: fix kzalloc memory corruption introduced in minstrel_ht". -- JWL) Reported-by: Fengguang Wu <wfg@linux.intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09cfg80211: use wdev in mgmt-tx/ROC APIsJohannes Berg5-17/+27
The management frame and remain-on-channel APIs will be needed in the P2P device abstraction, so move them over to the new wdev-based APIs. Userspace can still use both the interface index and wdev identifier for them so it's backward compatible, but for the P2P Device wdev it will be able to use the wdev identifier only. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09mac80211: remove ieee80211_key_removedJohannes Berg1-20/+0
This API call was intended to be used by drivers if they want to optimize key handling by removing one key when another is added. Remove it since no driver is using it. If needed, it can always be added back. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09mac80211: remove unused assignmentJohannes Berg1-1/+1
ieee80211_mlme_notify_scan_completed() iterates all interfaces and doesn't need to assign anything to the sdata variable before the loop. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09mac80211: update BSS info on AC parameters changeJohannes Berg2-14/+16
When the AC parameters change, drivers might rely on getting a bss_info_changed notification with BSS_CHANGED_QOS in addition to the conf_tx call. Always call the function when userspace updates are made (in AP/GO modes) and also set the change flag when updates were made by the AP (in managed mode.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-07mac80211: request TX status for BlockAck RequestsChristian Lamparter1-1/+2
Because ieee80211_tx_status in status.c checks if outgoing BlockAck requests have been acked, it is necessary to tell the driver that tx feedback for this sort of frame is important. Otherwise, the stack will continue to send the same BlockAck request over and over, which can cause the receiver to flush or clean its reorder buffer over and over. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-06mac80211: fix crash with single-queue driversJohannes Berg1-2/+10
Larry (and some others I think) reported that with single-queue drivers mac80211 crashes when waking the queues. This happens because we allocate just a single queue for each virtual interface in case the driver doesn't have at least 4 queues, but the code stopping/waking the virtual interface queues wasn't taking this into account. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-06mac80211: always set in_reconfig=false on wakeupEliad Peller1-1/+1
If the interfaces were removed just before a restart work was started, open_count will be 0, and most of the reconfig work will be skipped, including the resetting of local->in_reconfig to false. Leaving local->inconfig = true will result in dropping any incoming packet. Fix it by always setting local->in_reconfig = false (even if there are no active interfaces). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-06mac80211: fix debugfs default key linksJohannes Berg1-6/+10
Due to the way the default key links are created, it happens that a link is left dangling: * both unicast/multicast links are created * unicast link is destroyed, and the links are updated * during this update, adding the multicast link again fails because it is present, destroying the debugfs pointer * removing the multicast link won't work as the pointer has been destroyed Fix this by always removing the links and then re-creating them if needed. Reported-by: Marek Lindner <lindner_marek@yahoo.de> Reported-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-03mac80211: add TX prepare APIJohannes Berg3-0/+29
Some drivers require setup before being able to send management frames in managed mode, in particular in multi-channel cases. Introduce API to allow the drivers to do such setup while being able to sleep waiting for the setup to finish in the device. This isn't possible inside the TX call since that can't sleep. A future patch may also restructure the TX retry to wait for the driver to report the frame status, as suggested by Arik in http://mid.gmane.org/CA+XVXffKSEL6ZQPQ98x-zO-NL2=TNF1uN==mprRyUmAaRn254g@mail.gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-03mac80211: reduce IEEE80211_TX_MAX_RATESThomas Huehn1-2/+1
IEEE80211_TX_MAX_RATES can be reduced from 5 to 4 as there is no current hardware supporting a rate chain with 5 multi rate stages (mrr), so 4 mrr stages are sufficient. The memory that is freed within the ieee80211_tx_info struct will be used in the upcoming Transmission Power Control (TPC) implementation. Suggested-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02mac80211: remove tx_frags driver callbackJohannes Berg3-14/+3
The implementation of tx_frags is buggy due to not handling queue stop, and there's no driver implementing it so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 07:51:02 +0000