summaryrefslogtreecommitdiffstats
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2020-08-27mac80211: reduce packet loss event false positivesFelix Fietkau2-18/+17
When running a large number of packets per second with a high data rate and long A-MPDUs, the packet loss threshold can be reached very quickly when the link conditions change. This frequently shows up as spurious disconnects. Mitigate false positives by using a similar logic for regular stations as the one being used for TDLS, though with a more aggressive timeout. Packet loss events are only reported if no ACK was received for a second. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200808172542.41628-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: improve AQL aggregation estimation for low data ratesFelix Fietkau1-12/+26
Links with low data rates use much smaller aggregates and are much more sensitive to latency added by bufferbloat. Tune the assumed aggregation length based on the tx rate duration. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200821163045.62140-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: factor out code to look up the average packet length duration for ↵Felix Fietkau1-47/+74
a rate This will be used to enhance AQL estimated aggregation length Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200821163045.62140-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: use rate provided via status->rate on ieee80211_tx_status_ext for AQLFelix Fietkau3-6/+60
Since ieee80211_tx_info does not have enough room to encode HE rates, HE drivers use status->rate to provide rate info. Store it in struct sta_info and use it for AQL. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200821163045.62140-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-07mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long3-4/+4
As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-03mac80211: Do not report beacon loss if beacon filtering enabledLoic Poulain1-0/+3
mac80211.h says: Beacon filter support is advertised with the IEEE80211_VIF_BEACON_FILTER interface capability. The driver needs to enable beacon filter support whenever power save is enabled, that is IEEE80211_CONF_PS is set. When power save is enabled, the stack will not check for beacon loss and the driver needs to notify about loss of beacons with ieee80211_beacon_loss(). Some controllers may want to dynamically enable the beacon filter capabilities on power save entry (CONF_PS) and disable it on exit. This is the case for the wcn36xx driver which only supports beacon filtering in PS mode (no CONNECTION_MONITOR support). When the mac80211 beacon monitor timer expires, the beacon filter flag must be checked again in case it as been changed in between (e.g. vif moved to PS mode). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1592471863-31402-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03mac80211: fix misplaced while instead of ifJohannes Berg1-1/+1
This never was intended to be a 'while' loop, it should've just been an 'if' instead of 'while'. Fix this. I noticed this while applying another patch from Ben that intended to fix a busy loop at this spot. Cc: stable@vger.kernel.org Fixes: b16798f5b907 ("mac80211: mark station unauthorized before key removal") Reported-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20200803110209.253009ae41ff.I3522aad099392b31d5cf2dcca34cbac7e5832dde@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03mac80211: use eth_zero_addr() to clear mac addressMiaohe Lin1-1/+2
Use eth_zero_addr() to clear mac address instead of memset(). Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/1596273158-24183-1-git-send-email-linmiaohe@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03mac8211: fix struct initialisationJohn Crispin1-1/+1
Sparse showed up with the following error. net/mac80211/agg-rx.c:480:43: warning: Using plain integer as NULL pointer Fixes: 2ab45876756f (mac80211: add support for the ADDBA extension element) Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200803084540.179908-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03mac80211: Handle special status codes in SAE commitJouni Malinen1-1/+4
SAE authentication has been extended with H2E (IEEE 802.11 REVmd) and PK (WFA) options. Those extensions use special status code values in the SAE commit messages (Authentication frame with transaction sequence number 1) to identify which extension is in use. mac80211 was interpreting those new values as the AP denying authentication and that resulted in failure to complete SAE authentication in some cases. Fix this by adding exceptions for the new status code values 126 and 127. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200731183830.18735-1-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller6-6/+24
Resolved kernel/bpf/btf.c using instructions from merge commit 69138b34a7248d2396ab85c8652e20c0c39beaba Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31mac80211: warn only once in check_sdata_in_driver() at each callerJohannes Berg1-6/+5
Ben Greear has repeatedly reported in the past (for a few years probably) that this triggers repeatedly in certain scenarios. Make this a macro so that each callsite can trigger the warning only once - that will still give us an idea of what's going on and what paths can reach it, but avoids being too noisy. Link: https://lore.kernel.org/r/20200730155212.06fd3a95dbfb.I0b16829aabfaf5f642bce401502a29d16e2dd444@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31cfg80211: invert HE BSS color 'disabled' to 'enabled'Johannes Berg2-5/+5
This is in fact 'disabled' in the spec, but there it's in a place where that actually makes sense. In our internal data structures, it doesn't really make sense, and in fact the previous commit just fixed a bug in that area. Make this safer by inverting the polarity from 'disabled' to 'enabled'. Link: https://lore.kernel.org/r/20200730130051.5d8399545bd9.Ie62fdcd1a6cd9c969315bc124084a494ca6c8df3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: add a function for running rx without passing skbs to the stackFelix Fietkau2-23/+39
This can be used to run mac80211 rx processing on a batch of frames in NAPI poll before passing them to the network stack in a large batch. This can improve icache footprint, or it can be used to pass frames via netif_receive_skb_list. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200726110611.46886-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: parse radiotap header when selecting Tx queueMathy Vanhoef2-34/+35
Already parse the radiotap header in ieee80211_monitor_select_queue. In a subsequent commit this will allow us to add a radiotap flag that influences the queue on which injected packets will be sent. This also fixes the incomplete validation of the injected frame in ieee80211_monitor_select_queue: currently an out of bounds memory access may occur in in the called function ieee80211_select_queue_80211 if the 802.11 header is too small. Note that in ieee80211_monitor_start_xmit the radiotap header is parsed again, which is necessairy because ieee80211_monitor_select_queue is not always called beforehand. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20200723100153.31631-6-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: remove unused flags argument in transmit functionsMathy Vanhoef7-22/+18
The flags argument in transmit functions is no longer being used and can be removed. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20200723100153.31631-5-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: use same flag everywhere to avoid sequence number overwriteMathy Vanhoef3-7/+3
Use the IEEE80211_TX_CTRL_NO_SEQNO flag in ieee80211_tx_info to mark probe requests whose sequence number must not be overwritten. This provides consistency with the radiotap flag that can be set to indicate that the sequence number of an injected frame should not be overwritten. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20200723100153.31631-4-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: do not overwrite the sequence number if requestedMathy Vanhoef1-0/+3
Check if the Tx control flag is set to prevent sequence number overwrites, and if so, do not assign a new sequence number to the transmitted frame. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20200723100153.31631-3-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: add radiotap flag to prevent sequence number overwriteMathy Vanhoef1-0/+2
The radiotap specification contains a flag to indicate that the sequence number of an injected frame should not be overwritten. Parse this flag and define and set a corresponding Tx control flag. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20200723100153.31631-2-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: never drop injected frames even if normally not allowedMathy Vanhoef1-1/+1
In ieee80211_tx_dequeue there is a check to see if the dequeued frame is allowed in the current state. Injected frames that are normally not allowed are being be dropped here. Fix this by checking if a frame was injected and if so always allowing it. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20200723100153.31631-1-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31cfg80211/mac80211: avoid bss color setting in non-HE modesP Praneesh2-4/+8
Adding bss-color configuration is only valid in HE mode. Earlier we have enabled it by default, irrespective of capabilities/mode. Fix that. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Link: https://lore.kernel.org/r/1594262781-21444-1-git-send-email-ppranees@codeaurora.org [fix up commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: calculate skb hash early when using itxqFelix Fietkau1-0/+1
This avoids flow separation issues when using software encryption. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200726130947.88145-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: improve AQL tx airtime estimationFelix Fietkau3-7/+24
AQL does not take into account that most HT/VHT/HE traffic is A-MPDU aggregated. Because of that, the per-packet airtime overhead is vastly overestimated. Improve it by assuming an average aggregation length of 16 for non-legacy traffic if not using the VO AC queue. This should improve performance with high data rates, especially with multiple stations Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200724182816.18678-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31cfg80211/mac80211: add connected to auth server to station infoMarkus Theil2-1/+5
This patch adds the necessary bits to later query the auth server flag for every peer from iw. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200611140238.427461-2-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31cfg80211/mac80211: add connected to auth server to meshconfMarkus Theil3-1/+10
Besides information about num of peerings and gate connectivity, the mesh formation byte also contains a flag for authentication server connectivity, that currently cannot be set in the mesh conf. This patch adds this capability, which is necessary to implement 802.1X authentication in mesh mode. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200611140238.427461-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31cfg80211/mac80211: add mesh_param "mesh_nolearn" to skip path discoveryLinus Lüssing3-0/+43
Currently, before being able to forward a packet between two 802.11s nodes, both a PLINK handshake is performed upon receiving a beacon and then later a PREQ/PREP exchange for path discovery is performed on demand upon receiving a data frame to forward. When running a mesh protocol on top of an 802.11s interface, like batman-adv, we do not need the multi-hop mesh routing capabilities of 802.11s and usually set mesh_fwding=0. However, even with mesh_fwding=0 the PREQ/PREP path discovery is still performed on demand. Even though in this scenario the next hop PREQ/PREP will determine is always the direct 11s neighbor node. The new mesh_nolearn parameter allows to skip the PREQ/PREP exchange in this scenario, leading to a reduced delay, reduced packet buffering and simplifies HWMP in general. mesh_nolearn is still rather conservative in that if the packet destination is not a direct 11s neighbor, it will fall back to PREQ/PREP path discovery. For normal, multi-hop 802.11s mesh routing it is usually not advisable to enable mesh_nolearn as a transmission to a direct but distant neighbor might be worse than reaching that same node via a more robust / higher throughput etc. multi-hop path. Cc: Sven Eckelmann <sven@narfation.org> Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Link: https://lore.kernel.org/r/20200617073034.26149-1-linus.luessing@c0d3.blue [fix nl80211 policy to range 0/1 only] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: Use fallthrough pseudo-keywordGustavo A. R. Silva16-43/+42
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707204548.GA9320@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: remove the need for variable rates_idxColin Ian King1-3/+1
Currently rates_idx is being initialized with the value -1 and this value is never read so the initialization is redundant and can be removed. The next time the variable is used it is assigned a value that is returned a few statements later. Just return i - 1 and remove the need for rates_idx. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200722153830.959010-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31nl80211: S1G band and channel definitionsThomas Pedersen4-1/+13
Gives drivers the definitions needed to advertise support for S1G bands. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200602062247.23212-1-thomas@adapt-ip.com Link: https://lore.kernel.org/r/20200731055636.795173-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: remove STA txq pending airtime underflow warningFelix Fietkau1-3/+1
This warning can trigger if there is a mismatch between frames that were sent with the sta pointer set vs tx status frames reported for the sta address. This can happen due to race conditions on re-creating stations, or even in the case of .sta_add/remove being used instead of .sta_state, which can cause frames to be sent to a station that has not been uploaded yet. If there is an actual underflow issue, it should show up in the device airtime warning below, so it is better to remove this one. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200725084533.13829-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: Fix bug in Tx ack status reporting in 802.3 xmit pathVasanthakumar Thiagarajan1-3/+4
Allocated ack_frame id from local->ack_status_frames is not really stored in the tx_info for 802.3 Tx path. Due to this, tx ack status is not reported and ack_frame id is not freed for the buffers requiring tx ack status. Also move the memset to 0 of tx_info before IEEE80211_TX_CTL_REQ_TX_STATUS flag assignment. Fixes: 50ff477a8639 ("mac80211: add 802.11 encapsulation offloading support") Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Link: https://lore.kernel.org/r/1595427617-1713-1-git-send-email-vthiagar@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: mesh: Free pending skb when destroying a mpathRemi Pommarel1-0/+1
A mpath object can hold reference on a list of skb that are waiting for mpath resolution to be sent. When destroying a mpath this skb list should be cleaned up in order to not leak memory. Fixing that kind of leak: unreferenced object 0xffff0000181c9300 (size 1088): comm "openvpn", pid 1782, jiffies 4295071698 (age 80.416s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 f9 80 36 00 00 00 00 00 ..........6..... 02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<000000002caaef13>] sk_prot_alloc.isra.39+0x34/0x178 [<00000000ceeaa916>] sk_alloc+0x34/0x228 [<00000000ca1f1d04>] inet_create+0x198/0x518 [<0000000035626b1c>] __sock_create+0x134/0x328 [<00000000a12b3a87>] __sys_socket+0xb0/0x158 [<00000000ff859f23>] __arm64_sys_socket+0x40/0x58 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc unreferenced object 0xffff000012973a40 (size 216): comm "openvpn", pid 1782, jiffies 4295082137 (age 38.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 c0 06 16 00 00 ff ff 00 93 1c 18 00 00 ff ff ................ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<0000000023c8c8f9>] __alloc_skb+0xc0/0x2b8 [<000000007ad950bb>] alloc_skb_with_frags+0x60/0x320 [<00000000ef90023a>] sock_alloc_send_pskb+0x388/0x3c0 [<00000000104fb1a3>] sock_alloc_send_skb+0x1c/0x28 [<000000006919d2dd>] __ip_append_data+0xba4/0x11f0 [<0000000083477587>] ip_make_skb+0x14c/0x1a8 [<0000000024f3d592>] udp_sendmsg+0xaf0/0xcf0 [<000000005aabe255>] inet_sendmsg+0x5c/0x80 [<000000008651ea08>] __sys_sendto+0x15c/0x218 [<000000003505c99b>] __arm64_sys_sendto+0x74/0x90 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc Fixes: 2bdaf386f99c (mac80211: mesh: move path tables into if_mesh) Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://lore.kernel.org/r/20200704135419.27703-1-repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: mesh: Free ie data when leaving meshRemi Pommarel1-0/+1
At ieee80211_join_mesh() some ie data could have been allocated (see copy_mesh_setup()) and need to be cleaned up when leaving the mesh. This fixes the following kmemleak report: unreferenced object 0xffff0000116bc600 (size 128): comm "wpa_supplicant", pid 608, jiffies 4294898983 (age 293.484s) hex dump (first 32 bytes): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 0............... 00 0f ac 08 00 00 00 00 c4 65 40 00 00 00 00 00 .........e@..... backtrace: [<00000000bebe439d>] __kmalloc_track_caller+0x1c0/0x330 [<00000000a349dbe1>] kmemdup+0x28/0x50 [<0000000075d69baa>] ieee80211_join_mesh+0x6c/0x3b8 [mac80211] [<00000000683bb98b>] __cfg80211_join_mesh+0x1e8/0x4f0 [cfg80211] [<0000000072cb507f>] nl80211_join_mesh+0x520/0x6b8 [cfg80211] [<0000000077e9bcf9>] genl_family_rcv_msg+0x374/0x680 [<00000000b1bd936d>] genl_rcv_msg+0x78/0x108 [<0000000022c53788>] netlink_rcv_skb+0xb0/0x1c0 [<0000000011af8ec9>] genl_rcv+0x34/0x48 [<0000000069e41f53>] netlink_unicast+0x268/0x2e8 [<00000000a7517316>] netlink_sendmsg+0x320/0x4c0 [<0000000069cba205>] ____sys_sendmsg+0x354/0x3a0 [<00000000e06bab0f>] ___sys_sendmsg+0xd8/0x120 [<0000000037340728>] __sys_sendmsg+0xa4/0xf8 [<000000004fed9776>] __arm64_sys_sendmsg+0x44/0x58 [<000000001c1e5647>] el0_svc_handler+0xd0/0x1a0 Fixes: c80d545da3f7 (mac80211: Let userspace enable and configure vendor specific path selection.) Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://lore.kernel.org/r/20200704135007.27292-1-repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: fix warning in 6 GHz IE addition in mesh modeRajkumar Manoharan2-0/+17
The commit 24a2042cb22f ("mac80211: add HE 6 GHz Band Capability element") failed to check device capability before adding HE 6 GHz capability element. Below warning is reported in 11ac device in mesh. Fix that by checking device capability at HE 6 GHz cap IE addition in mesh beacon and association request. WARNING: CPU: 1 PID: 1897 at net/mac80211/util.c:2878 ieee80211_ie_build_he_6ghz_cap+0x149/0x150 [mac80211] [ 3138.720358] Call Trace: [ 3138.720361] ieee80211_mesh_build_beacon+0x462/0x530 [mac80211] [ 3138.720363] ieee80211_start_mesh+0xa8/0xf0 [mac80211] [ 3138.720365] __cfg80211_join_mesh+0x122/0x3e0 [cfg80211] [ 3138.720368] nl80211_join_mesh+0x3d3/0x510 [cfg80211] Fixes: 24a2042cb22f ("mac80211: add HE 6 GHz Band Capability element") Reported-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1593656424-18240-1-git-send-email-rmanohar@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-13net: mac80211: kerneldoc fixesAndrew Lunn1-3/+1
Simple fixes which require no deep knowledge of the code. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25mac80211: allow rx of mesh eapol frames with default rx keyMarkus Theil1-0/+26
Without this patch, eapol frames cannot be received in mesh mode, when 802.1X should be used. Initially only a MGTK is defined, which is found and set as rx->key, when there are no other keys set. ieee80211_drop_unencrypted would then drop these eapol frames, as they are data frames without encryption and there exists some rx->key. Fix this by differentiating between mesh eapol frames and other data frames with existing rx->key. Allow mesh mesh eapol frames only if they are for our vif address. With this patch in-place, ieee80211_rx_h_mesh_fwding continues after the ieee80211_drop_unencrypted check and notices, that these eapol frames have to be delivered locally, as they should. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de [small code cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-25mac80211: skip mpath lookup also for control port txMarkus Theil1-1/+5
When using 802.1X over mesh networks, at first an ordinary mesh peering is established, then the 802.1X EAPOL dialog happens, afterwards an authenticated mesh peering exchange (AMPE) happens, finally the peering is complete and we can set the STA authorized flag. As 802.1X is an intermediate step here and key material is not yet exchanged for stations we have to skip mesh path lookup for these EAPOL frames. Otherwise the already configure mesh group encryption key would be used to send a mesh path request which no one can decipher, because we didn't already establish key material on both peers, like with SAE and directly using AMPE. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200617082637.22670-2-markus.theil@tu-ilmenau.de [remove pointless braces, remove unnecessary local variable, the list can only process one such frame (or its fragments)] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-25mac80211: Fix dropping broadcast packets in 802.11 encapSeevalamuthu Mariappan1-1/+1
Broadcast pkts like arp are getting dropped in 'ieee80211_8023_xmit'. Fix this by replacing is_valid_ether_addr api with is_zero_ether_addr. Fixes: 50ff477a8639 ("mac80211: add 802.11 encapsulation offloading support") Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Link: https://lore.kernel.org/r/1591697754-4975-1-git-send-email-seevalam@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-25mac80211: simplify mesh codePavel Machek1-5/+2
Doing mod_timer() conditionaly is easier than conditionally unlocking and jumping around... Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Acked-by: Linus Lüssing <ll@simonwunderlich.de> Link: https://lore.kernel.org/r/20200604214157.GA9737@amd Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-25mac80211: fix control port tx status checkMarkus Theil1-7/+15
The initial control port tx status patch assumed, that we have IEEE 802.11 frames, but actually ethernet frames are stored in the ack skb. Fix this by checking for the correct ethertype and skb protocol 802.3. Also allow tx status reports for ETH_P_PREAUTH, as preauth frames can also be send over the nl80211 control port. Fixes: a7528198add8 ("mac80211: support control port TX status reporting") Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20200622123542.173695-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2-1/+3
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ...
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-26/+26
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-08net: fix wiki website url mac80211 and wireless filesFlavio Suligoi1-1/+1
In the files: - net/mac80211/rx.c - net/wireless/Kconfig the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Link: https://lore.kernel.org/r/20200605154112.16277-10-f.suligoi@asem.it Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-05mac80211: initialize return flags in HE 6 GHz operation parsingJohannes Berg1-0/+2
Dan points out that if ieee80211_chandef_he_6ghz_oper() succeeds, we don't initialize 'ret'. Initialize it to 0 in this case, since everything went fine and nothing has to be disabled. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 57fa5e85d53c ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200603111500.bd2a5ff37b83.I2c3f338ce343b581db493eb9a0d988d1b626c8fb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+7
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-31mac80211: set short_slot for 6 GHz bandTova Mussai2-2/+4
Set short slot also for 6 GHz band, just like 5 GHz. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Link: https://lore.kernel.org/r/20200528213443.75f38e6f5efd.I272fbae402b03123f04e9ae69204eeab960c70cd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: Consider 6 GHz band when handling power constraintIlan Peer1-0/+1
Treat it like the 5 GHz band. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20200528213443.889e5c9dd006.Id8ed3bb8000ba8738be5df05639415eb2e23c61a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: accept aggregation sessions on 6 GHzJohannes Berg2-3/+5
On 6 GHz, stations don't have ht_supported set, but they can still do aggregation since they must have HE, allow that. Link: https://lore.kernel.org/r/20200528213443.776d3c891b64.Ifa099d450617b50c691832b3c4aa08959fab520a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: Add HE 6GHz capabilities element to probe requestIlan Peer3-17/+38
On 6 GHz, the 6 GHz capabilities element should be added, do that. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [add commit message] Link: https://lore.kernel.org/r/20200528213443.8ee764f0cde0.I2b0c66b60e11818c97c9803e04a6a197c6376243@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: use HE 6 GHz band capability and pass it to the driverJohannes Berg5-2/+56
In order to handle 6 GHz AP side, take the HE 6 GHz band capability data and pass it to the driver (which needs it for A-MPDU spacing and A-MPDU length). Link: https://lore.kernel.org/r/1589399105-25472-6-git-send-email-rmanohar@codeaurora.org Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/20200528213443.784e4890d82f.I5f1230d5ab27e84e7bbe88e3645b24ea15a0c146@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 04:06:23 +0000