summaryrefslogtreecommitdiffstats
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2020-10-13mac80211: use new function dev_fetch_sw_netstatsHeiner Kallweit1-22/+1
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/93dda477-70ae-0ccf-71b4-bfebb66c9beb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08mac80211: copy configured beacon tx rate to driverRajkumar Manoharan1-0/+3
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd. This information needs to be passed to the driver when the rate control is offloaded to the firmware. The driver capability of allowing beacon rate is already validated in cfg80211, so simply passing the rate information to the driver is enough. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1601762658-15627-1-git-send-email-rmanohar@codeaurora.org [adjust commit message slightly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-08mac80211: initialize last_rate for S1G STAsThomas Pedersen6-1/+25
last_rate is initialized to zero by sta_info_alloc(), but this indicates legacy bitrate for the last TX rate (and invalid for the last RX rate). To avoid a warning when decoding the last rate as legacy (before a data frame has been sent), initialize them as S1G MCS. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20201005164522.18069-2-thomas@adapt-ip.com [rename to ieee80211_s1g_sta_rate_init(), seems more appropriate] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-08mac80211: handle lack of sband->bitrates in ratesThomas Pedersen2-1/+6
Even though a driver or mac80211 shouldn't produce a legacy bitrate if sband->bitrates doesn't exist, don't crash if that is the case either. This fixes a kernel panic if station dump is run before last_rate can be updated with a data frame when sband->bitrates is missing (eg. in S1G bands). Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20201005164522.18069-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-02mac80211: avoid processing non-S1G elements on S1G bandThomas Pedersen1-6/+9
In ieee80211_determine_chantype(), the sband->ht_cap was being processed before S1G Operation element. Since the HT capability element should not be present on the S1G band, avoid processing potential garbage by moving the call to ieee80211_apply_htcap_overrides() to after the S1G block. Also, in case of a missing S1G Operation element, we would continue trying to process non-S1G elements (and return with a channel width of 20MHz). Instead, just assume primary channel is equal to operating and infer the operating width from the BSS channel, then return. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20201001174748.24520-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: Support not iterating over not-sdata-in-driver ifacesBen Greear1-0/+3
Allow drivers to request that interface-iterator does NOT iterate over interfaces that are not sdata-in-driver. This will allow us to fix crashes in ath10k (and possibly other drivers). To summarize Johannes' explanation: Consider add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 If you apply this scenario to a restart, which ought to be functionally equivalent to the normal startup, just compressed in time, you're basically saying that today you get add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 wlan2 << problem here add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 which yeah, totally seems wrong. But fixing that to be add interface wlan0 add interface wlan1 iterate active interfaces -> <nothing> add interface wlan2 iterate active interfaces -> <nothing> (or maybe -> wlan0 wlan1 wlan2 if the reconfig already completed) This is also at least somewhat wrong, but better to not iterate over something that exists in the driver than iterate over something that does not. Originally the first issue was causing crashes in testing with lots of station vdevs on an ath10k radio, combined with firmware crashing. I ran with a similar patch for years with no obvious bad results, including significant testing with ath9k and ath10k. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20200922191957.25257-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: fix some more kernel-doc in meshJohannes Berg2-0/+5
Add a few more missing kernel-doc annotations in mesh code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200928135129.6409460c28b7.I43657d0b70398723e59e4e724f56af88af0fec7e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: fix regression in sta connection monitorFelix Fietkau2-5/+15
When a frame was acked and probe frames were sent, the connection monitoring needs to be reset, otherwise it will keep probing until the connection is considered dead, even though frames have been acked in the mean time. Fixes: 9abf4e49830d ("mac80211: optimize station connection monitor") Reported-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200927105605.97954-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: support S1G associationThomas Pedersen5-13/+128
The changes required for associating in S1G are: - apply S1G BSS channel info before assoc - mark all S1G STAs as QoS STAs - include and parse AID request element - handle new Association Response format - don't fail assoc if supported rates element is missing Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-15-thomas@adapt-ip.com [pass skb to ieee80211_add_aid_request_ie(), remove unused variable 'bss'] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: receive and process S1G beaconsThomas Pedersen5-65/+159
S1G beacons are 802.11 Extension Frames, so the fixed header part differs from regular beacons. Add a handler to process S1G beacons and abstract out the fetching of BSSID and element start locations in the beacon body handler. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-14-thomas@adapt-ip.com [don't rename, small coding style cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: avoid rate init for S1G bandThomas Pedersen1-0/+6
minstrel_ht is confused by the lack of sband->bitrates, and S1G will likely require a unique RC algorithm, so avoid rate init for now if STA is on the S1G band. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-13-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: handle S1G low ratesThomas Pedersen1-7/+26
S1G doesn't have legacy (sband->bitrates) rates, only MCS. For now, just send a frame at MCS 0 if a low rate is requested. Note we also redefine (since we're out of TX flags) TX_RC_VHT_MCS as TX_RC_S1G_MCS to indicate an S1G MCS. This is probably OK as VHT MCS is not valid on S1G band and vice versa. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-12-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: don't calculate duration for S1GThomas Pedersen1-0/+4
For now just skip the duration calculation for frames transmitted on the S1G band and avoid a warning. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-11-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: encode listen interval for S1GThomas Pedersen3-4/+28
S1G allows listen interval up to 2^14 * 10000 beacon intervals. In order to do this listen interval needs a scaling factor applied to the lower 14 bits. Calculate this and properly encode the listen interval for S1G STAs. See IEEE802.11ah-2016 Table 9-44a for reference. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-10-thomas@adapt-ip.com [move listen_int_usf into function using it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: convert S1G beacon to scan resultsThomas Pedersen4-5/+40
This commit finds the correct offset for Information Elements in S1G beacon frames so they can be reported in scan results. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-8-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: support S1G STA capabilitiesThomas Pedersen3-0/+54
Include the S1G Capabilities element in an association request, and support the cfg80211 capability overrides. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-5-thomas@adapt-ip.com [pass skb to ieee80211_add_s1g_capab_ie(), small code style edits] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: s1g: choose scanning width based on frequencyThomas Pedersen1-0/+17
An S1G BSS can beacon at either 1 or 2 MHz and the channel width is unique to a given frequency. Ignore scan channel width for now and use the allowed channel width. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: get correct default channel width for S1GThomas Pedersen1-1/+8
When deleting a channel context, mac80211 would assing NL80211_CHAN_WIDTH_20_NOHT as the default channel width. This is wrong in S1G however, so instead get the allowed channel width for a given channel. Fixes eg. configuring strange (20Mhz) width during a scan on the S1G band. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-2-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: fix some missing kernel-docJohannes Berg1-0/+2
Two parameters are not described, add them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200924192511.21411377b0a8.I1add147d782a3bf38287bde412dc98f69323c732@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211/cfg80211: support 6 GHz scanningTova Mussai1-2/+7
Support 6 GHz scanning, by * a new scan flag to scan for colocated BSSes advertised by (and found) APs on 2.4 & 5 GHz * doing the necessary reduced neighbor report parsing for this, to find them * adding the ability to split the scan request in case the device by itself cannot support this. Also add some necessary bits in mac80211 to not break with these changes. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: Inform AP when returning operating channelLoic Poulain2-30/+9
Because we can miss AP wakeup (beacon) while scanning other channels, it's better go into wakeup state and inform the AP of that upon returning to the operating channel, rather than staying asleep and waiting for the next TIM indicating traffic for us. This saves precious time, especially when we only have 200ms inter- scan period for monitoring the active connection. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1593420923-26668-1-git-send-email-loic.poulain@linaro.org [rewrite commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller5-15/+26
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18mac80211: Unsolicited broadcast probe response supportAloka Dixit3-0/+77
This patch adds mac80211 support to configure unsolicited broadcast probe response transmission for in-band discovery in 6GHz. Changes include functions to store and retrieve probe response template, and packet interval (0 - 20 TUs). Setting interval to 0 disables the unsolicited broadcast probe response transmission. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/010101747a946b35-ad25858a-1f1f-48df-909e-dc7bf26d9169-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: Add FILS discovery supportAloka Dixit3-6/+83
This patch adds mac80211 support to configure FILS discovery transmission. Changes include functions to store and retrieve FILS discovery template, minimum and maximum packet intervals. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/20200805011838.28166-3-alokad@codeaurora.org [remove SUPPORTS_FILS_DISCOVERY, driver can just set wiphy info] Link: https://lore.kernel.org/r/010101747a7b3cbb-6edaa89c-436d-4391-8765-61456d7f5f4e-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: fix 80 MHz association to 160/80+80 AP on 6 GHzJohn Crispin1-3/+4
When trying to associate to an AP support 180 or 80+80 MHz on 6 GHz with a STA that only has 80 Mhz support the cf2 field inside the chandef will get set causing the association to fail when trying to validate the chandef. Fix this by checking the support flags prior to setting cf2. Fixes: 57fa5e85d53ce ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200918115304.1135693-1-john@phrozen.org [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limitedFelix Fietkau1-4/+0
Some APs (e.g. Asus RT-AC88U) have been observed to report an HT MSDU size limit of 3839 and a VHT limit of 7991. These APs can handle bigger frames than 3839 bytes just fine, so we should remove the VHT limit based on the HT capabilities. This improves tx throughput. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200916164611.8022-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: reorganize code to remove a forward declarationFelix Fietkau1-473/+471
Remove the newly added ieee80211_set_vif_encap_ops declaration. No further code changes. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-15-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: extend ieee80211_tx_status_ext to support bulk freeFelix Fietkau1-2/+8
Store processed skbs ready to be freed in a list so the driver bulk free them Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-13-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: support using ieee80211_tx_status_ext to free skbs without status infoFelix Fietkau1-11/+16
For encap-offloaded packets, ieee80211_free_txskb cannot be used, since it does not have the vif pointer. Using ieee80211_tx_status_ext for this purpose has the advantage of being able avoid an extra station lookup for AQL Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-12-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: unify 802.3 (offload) and 802.11 tx status codepathFelix Fietkau1-64/+28
Make ieee80211_tx_status_8023 call ieee80211_tx_status_ext, similar to ieee80211_tx_status. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-11-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: optimize station connection monitorFelix Fietkau5-47/+22
Calling mod_timer for every rx/tx packet can be quite expensive. Instead of constantly updating the timer, we can simply let it run out and check the timestamp of the last ACK or rx packet to re-arm it. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-9-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: notify the driver when a sta uses 4-address modeFelix Fietkau4-0/+45
This is needed for encapsulation offload of 4-address mode packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-14-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: swap NEED_TXPROCESSING and HW_80211_ENCAP tx flagsFelix Fietkau5-14/+14
In order to unify the tx status path, the hw 802.11 encapsulation flag needs to survive the trip to the tx status call. Since we don't have any free bits in info->flags, we need to move one. IEEE80211_TX_INTFL_NEED_TXPROCESSING is only used internally in mac80211, and only before the call into the driver. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-10-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: remove tx status call to ieee80211_sta_register_airtimeFelix Fietkau1-6/+0
All drivers using airtime fairness are calling ieee80211_sta_register_airtime directly, now they must. Document this as well. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-8-nbd@nbd.name [johannes: update the documentation to suit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: reduce duplication in tx status functionsFelix Fietkau1-66/+35
Move redundant functionality from __ieee80211_tx_status into ieee80211_tx_status_ext. Preparation for unifying with the 802.3 tx status codepath. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-7-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: rework tx encapsulation offload APIFelix Fietkau7-87/+156
The current API (which lets the driver turn on/off per vif directly) has a number of limitations: - it does not deal with AP_VLAN - conditions for enabling (no tkip, no monitor) are only checked at add_interface time - no way to indicate 4-addr support In order to address this, store offload flags in struct ieee80211_vif (easy to extend for decap offload later). mac80211 initially sets the enable flag, but gives the driver a chance to modify it before its settings are applied. In addition to the .add_interface op, a .update_vif_offload op is introduced, which can be used for runtime changes. If a driver can't disable encap offload at runtime, or if it has some extra limitations, it can simply override the flags within those ops. Support for encap offload with 4-address mode interfaces can be enabled by setting a flag from .add_interface or .update_vif_offload. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-6-nbd@nbd.name [resolved conflict with commit aa2092a9bab3 ("ath11k: add raw mode and software crypto support")] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: set info->control.hw_key for encap offload packetsFelix Fietkau1-0/+5
This is needed for drivers that don't do the key lookup themselves Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: skip encap offload for tx multicast/control packetsFelix Fietkau1-55/+19
This simplifies the checks in the encap offload tx handler and allows using it in cases where software crypto is used for multicast packets, e.g. when using an AP_VLAN. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-4-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: check and refresh aggregation session in encap offload txFelix Fietkau1-0/+18
Update the last_tx timestamp to avoid tearing down the aggregation session early. Fall back to the slow path if the session setup is still running Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: add missing queue/hash initialization to 802.3 xmitFelix Fietkau1-0/+6
Fixes AQL for encap-offloaded tx Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: do not allow bigger VHT MPDUs than the hardware supportsFelix Fietkau1-4/+4
Limit maximum VHT MPDU size by local capability. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200917125031.45009-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: do not disable HE if HT is missing on 2.4 GHzWen Gong1-1/+2
VHT is not supported on 2.4 GHz, but HE is; don't disable HE if HT is missing there, do that only on 5 GHz (6 GHz is only HE). Fixes: 57fa5e85d53ce51 ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/010101747cb617f2-593c5410-1648-4a42-97a0-f3646a5a6dd1-000000@us-west-2.amazonses.com [rewrite the commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: Fix radiotap header channel flag for 6GHz bandAloka Dixit1-1/+2
Radiotap header field 'Channel flags' has '2 GHz spectrum' set to 'true' for 6GHz packet. Change it to 5GHz as there isn't a separate option available for 6GHz. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/010101747ab7b703-1d7c9851-1594-43bf-81f7-f79ce7a67cc6-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: add AQL support for VHT160 tx ratesFelix Fietkau1-1/+3
When converting from struct ieee80211_tx_rate to ieee80211_rx_status, there was one check missing to fill in the bandwidth for 160 MHz Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200915085945.3782-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: extend AQL aggregation estimation to HE and fix unit mismatchFelix Fietkau1-5/+11
The unit of the return value of ieee80211_get_rate_duration is nanoseconds, not microseconds. Adjust the duration checks to account for that. For higher data rates, allow larger estimated aggregation sizes, and add some values for HE as well, which can use much larger aggregates. Since small packets with high data rates can now lead to duration values too small for info->tx_time_est, return a minimum of 4us. Fixes: f01cfbaf9b29 ("mac80211: improve AQL aggregation estimation for low data rates") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200915085945.3782-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-78/+172
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-27mac80211: rename csa counters to countdown countersJohn Crispin7-52/+53
We want to reuse the functions and structs for other counters such as BSS color change. Rename them to more generic names. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200811080107.3615705-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27net: mac80211: mesh.h: delete duplicated wordRandy Dunlap1-1/+1
Drop the repeated word "address". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-3-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27net: mac80211: agg-rx.c: fix duplicated wordsRandy Dunlap1-1/+1
Change "If if" to "If it". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-2-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: reduce packet loss event false positivesFelix Fietkau2-18/+17
When running a large number of packets per second with a high data rate and long A-MPDUs, the packet loss threshold can be reached very quickly when the link conditions change. This frequently shows up as spurious disconnects. Mitigate false positives by using a similar logic for regular stations as the one being used for TDLS, though with a more aggressive timeout. Packet loss events are only reported if no ACK was received for a second. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200808172542.41628-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 11:28:41 +0000