summaryrefslogtreecommitdiffstats
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2012-06-08mac80211: add back channel change flagStanislaw Gruszka1-1/+1
commit 24398e39c8ee4a9d9123eed322b859ece4d16cac Author: Johannes Berg <johannes.berg@intel.com> Date: Wed Mar 28 10:58:36 2012 +0200 mac80211: set HT channel before association removed IEEE80211_CONF_CHANGE_CHANNEL argument from ieee80211_hw_config, which is required by iwl4965 driver, otherwise that driver does not configure channel properly and is not able to associate. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04mac80211: fix non RCU-safe sta_list manipulationArik Nemtsov1-2/+2
sta_info_cleanup locks the sta_list using rcu_read_lock however the delete operation isn't rcu safe. A race between sta_info_cleanup timer being called and a STA being removed can occur which leads to a panic while traversing sta_list. Fix this by switching to the RCU-safe versions. Cc: stable@vger.kernel.org Reported-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04mac80211: Fix likely misuse of | for &Joe Perches1-3/+3
Using | with a constant is always true. Likely this should have be &. cc: Ben Greear <greearb@candelatech.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04mac80211: add missing rcu_read_lock/unlock in agg-rx session timerFelix Fietkau1-1/+6
Fixes a lockdep warning: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- net/mac80211/agg-rx.c:148 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 1 lock held by arecord/11226: #0: (&tid_agg_rx->session_timer){+.-...}, at: [<ffffffff81066bb0>] call_timer_fn+0x0/0x360 stack backtrace: Pid: 11226, comm: arecord Not tainted 3.1.0-kml #16 Call Trace: <IRQ> [<ffffffff81093454>] lockdep_rcu_dereference+0xa4/0xc0 [<ffffffffa02778c9>] sta_rx_agg_session_timer_expired+0xc9/0x110 [mac80211] [<ffffffffa0277800>] ? ieee80211_process_addba_resp+0x220/0x220 [mac80211] [<ffffffff81066c3a>] call_timer_fn+0x8a/0x360 [<ffffffff81066bb0>] ? init_timer_deferrable_key+0x30/0x30 [<ffffffff81477bb0>] ? _raw_spin_unlock_irq+0x30/0x70 [<ffffffff81067049>] run_timer_softirq+0x139/0x310 [<ffffffff81091d5e>] ? put_lock_stats.isra.25+0xe/0x40 [<ffffffff810922ac>] ? lock_release_holdtime.part.26+0xdc/0x160 [<ffffffffa0277800>] ? ieee80211_process_addba_resp+0x220/0x220 [mac80211] [<ffffffff8105cb78>] __do_softirq+0xc8/0x3c0 [<ffffffff8108f088>] ? tick_dev_program_event+0x48/0x110 [<ffffffff8108f16f>] ? tick_program_event+0x1f/0x30 [<ffffffff81153b15>] ? putname+0x35/0x50 [<ffffffff8147a43c>] call_softirq+0x1c/0x30 [<ffffffff81004c55>] do_softirq+0xa5/0xe0 [<ffffffff8105d1ee>] irq_exit+0xae/0xe0 [<ffffffff8147ac6b>] smp_apic_timer_interrupt+0x6b/0x98 [<ffffffff81479ab3>] apic_timer_interrupt+0x73/0x80 <EOI> [<ffffffff8146aac6>] ? free_debug_processing+0x1a1/0x1d5 [<ffffffff81153b15>] ? putname+0x35/0x50 [<ffffffff8146ab2b>] __slab_free+0x31/0x2ca [<ffffffff81477c3a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90 [<ffffffff81253b8f>] ? __debug_check_no_obj_freed+0x15f/0x210 [<ffffffff81097054>] ? lock_release_nested+0x84/0xc0 [<ffffffff8113ec55>] ? kmem_cache_free+0x105/0x250 [<ffffffff81153b15>] ? putname+0x35/0x50 [<ffffffff81153b15>] ? putname+0x35/0x50 [<ffffffff8113ed8f>] kmem_cache_free+0x23f/0x250 [<ffffffff81153b15>] putname+0x35/0x50 [<ffffffff81146d8d>] do_sys_open+0x16d/0x1d0 [<ffffffff81146e10>] sys_open+0x20/0x30 [<ffffffff81478f42>] system_call_fastpath+0x16/0x1b Reported-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04mac80211: clean up remain-on-channel on interface stopJohannes Berg2-0/+28
When any interface goes down, it could be the one that we were doing a remain-on-channel with. We therefore need to cancel the remain-on-channel and flush the related work structs so they don't run after the interface has been removed or even destroyed. It's also possible in this case that an off-channel SKB was never transmitted, so free it if this is the case. Note that this can also happen if the driver finishes the off-channel period without ever starting it. Cc: stable@kernel.org Reported-by: Nirav Shah <nirav.j2.shah@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04mac80211: fix error in station state transitions during reconfigMeenakshi Venkataraman1-1/+1
As part of hardware reconfig mac80211 tries to restore the station state to its values before the hardware reconfig, but it only goes to the last-state - 1. Fix this off-by-one error. Cc: stable@kernel.org [3.4] Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04mac80211: Fix Unreachable Mesh Station Problem when joining to another MBSSChun-Yeow Yeoh1-3/+6
Mesh station that joins an MBSS is reachable using mesh portal with 6 address frame by mesh stations from another MBSS if these two different MBSSes are bridged. However, if the mesh station later moves into the same MBSS of those mesh stations, it is unreachable by mesh stations in the MBSS due to the mpp_paths table is not deleted. A quick fix is to perform mesh_path_lookup, if it is available for the target destination, mpp_path_lookup is not performed. When the mesh station moves back to its original MBSS, the mesh_paths will be deleted once expired. So, it will be reachable using mpp_path_lookup again. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-04mac80211: run scan after finish connection monitoringStanislaw Gruszka1-9/+27
commit 133d40f9a22bdfd2617a446f1e3209537c5415ec Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Wed Mar 28 16:01:19 2012 +0200 mac80211: do not scan and monitor connection in parallel add bug, which make possible to start a scan and never finish it, so make every new scanning request finish with -EBUSY error. This can happen on code paths where we finish connection monitoring and clear IEEE80211_STA_*_POLL flags, but do not check if scan was deferred. This patch fixes those code paths. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29mac80211: fix ADDBA declined after suspend with wowlanEyal Shapira1-6/+6
WLAN_STA_BLOCK_BA is set while suspending but doesn't get cleared when resuming in case of wowlan. This causes further ADDBA requests received to be rejected. Fix it by clearing it in the wowlan path as well. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29mac80211: fix flag check for QoS NOACK framesClaudio Pisa1-1/+1
Signed-off-by: Claudio Pisa <claudio.pisa@uniroma2.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-25mac80211: Fix race in checking AP status by sending null frameSoumik Das1-1/+2
mac80211 tries to verify the existence of the current AP by probing or sending a NULL frame in function ieee80211_mgd_probe_ap_send. It 1st sends a null frame to the AP, increments probe_send_count and waits for the ACK to the NULL frame for a finite duration of time. At times, it happens that by the time mac80211 gets to increment probe_send_count, the ACK for the NULL frame transmitted has already been processed. This leads to a race condition where mac80211 times out waiting for the ACK for the NULL frame causing unnecessary disconnection with the AP. Signed-off-by: Soumik Das <soumik.das@stericsson.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextJohn W. Linville11-45/+86
2012-05-16mac80211: Add debugfs entry for mesh ht_opmodeAshok Nagarajan1-0/+2
Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mac80211: Modify mesh_set_ht_prot_mode() to have less identationAshok Nagarajan1-23/+24
Determining types of peers is modified to have less indentation. This change is suggested by Johannes. This patch also corrects the reference in comment to IEEE 802.11-2012 version. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mac80211: Fix don't use '>' operator for matching channel typesAshok Nagarajan1-2/+4
Johannes pointed out that the use of > operators for checking channel type mismatch maynot be correct way as we may add other channel types in future. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mac80211: Push the deleted comment to correct placeAshok Nagarajan1-0/+5
This comment is deleted in the patch "mac80211: Advertise HT protection mode in IEs". Moving the comment to the now corrected place. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mac80211: fix network header location when adding encryption headersArik Nemtsov2-0/+3
Update the location of the network header when adding encryption specific headers to a skb. This allows low-level drivers to use the (now correct) location of the network header. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mac80211: (selectively) add HT details in radiotapJohannes Berg2-3/+6
Add a flag for the HT format (mixed vs. greenfield) to allow drivers to report that on receive. Not all drivers will do that though, so allow drivers to set which radiotap MCS details they report. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mac80211: Add IV-room in the skb for TKIP and WEPJanusz.Dziedzic@tieto.com2-4/+18
Add IV-room in skb also for TKIP and WEP. Extend patch: "mac80211: support adding IV-room in the skb for CCMP keys" Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mac80211: fix TX aggregation session timerJohannes Berg1-2/+8
In commit 12d3952fc4a1cd96234bc7023bf7eefeb0bb6355 ("mac80211: optimize aggregation session timeout handling") two bugs were introduced: 1) RCU usage was completely broken since no locks are held 2) the timer must not rearm when agg session is stopping Reported-and-tested-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16mac80211: fix single queue driversJohannes Berg1-1/+3
My queue management rework broke drivers that don't have multiple AC queues and register a single queue only, causing a warning: WARNING: at net/mac80211/iface.c:162 ieee80211_check_queues This was due to filling the queues wrongly and then noticing the error when checking later. Reported-and-Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15mac80211: fix the increment of unicast/multicast counters for forwarded PREQChun-Yeow Yeoh1-1/+4
Forwarded PREQ is either unicast or multicast. The appropriate counters should be incremented accordingly. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15mac80211: send peer candidate event for new sta onlyThomas Pedersen1-9/+9
Only send a cfg80211 new peer candidate notification if userspace has yet to allocate this station entry. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15net: Convert net_ratelimit uses to net_<level>_ratelimitedJoe Perches6-43/+28
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-14Merge branch 'master' of ↵David S. Miller10-22/+343
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2012-05-09mac80211: Convert compare_ether_addr to ether_addr_equal by handJoe Perches2-3/+3
spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09mac80211: Convert compare_ether_addr to ether_addr_equalJoe Perches13-71/+64
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08{nl,cfg,mac}80211: Allow user to see/configure HT protection modeAshok Nagarajan3-0/+9
This patch introduces a new mesh configuration parameter "ht_opmode" and will allow user to check the current HT protection mode selected. Users could configure the protection mode by the command "iw mesh_iface set mesh_param mesh_ht_protection_mode=2". The default protection mode of mesh is set to non-HT mixed mode. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Reviewed-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mac80211: Allow nonHT/HT peering in meshAshok Nagarajan1-3/+9
Now that we have protection enabled, allow non-HT and HT20 stations to peer with HT40+/- stations. Peering is still disallowed for HT40+/- mismatch. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Reviewed-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mac80211: Implement HT mixed protection modeAshok Nagarajan2-7/+77
Section 9.23.3.5 of IEEE 80211s standard describes the protection rules for HT mesh STA in a MBSS. Three HT protection modes are supported for now: non-HT mixed mode - is selected if any non-HT peers are present in our MBSS. 20MHz-protection mode - is selected if all peers in our 20/40MHz MBSS support HT and atleast one HT20 peer is present. no-protection mode - is selected otherwise. This is a limited implementation of 9.23.3.5, which only considers mesh peers when determining the HT protection mode. Station's channel_type needs to be maintained. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Reviewed-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mac80211: Advertise HT protection mode in IEsAshok Nagarajan4-9/+8
Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Reviewed-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mac80211: Add more ethtools stats: survey, rates, etcBen Greear1-8/+81
The signal and noise are forced to be positive since ethtool deals in unsigned 64-bit values and this number should be human readable. This gives easy access to some of the data formerly exposed in the deprecated /proc/net/wireless file. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mac80211: Framework to get wifi-driver stats via ethtool.Ben Greear3-3/+68
This adds hooks to call into the driver to get additional stats for the ethtool API. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mac80211: Support getting sta_info stats via ethtool.Ben Greear1-0/+91
This lets ethtool print out stats related to stations connected to the interface. Does not yet get stats from the underlying driver. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mac80211: don't transmit 40MHz frames to 20MHz peerThomas Pedersen1-0/+6
If a mesh peer indicates it is operating as 20MHz-only in its HT operation IE, have the rate control algorithm respect this by disabling the equivalent bit in the ieee80211_sta HT capabilities. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mac80211: insert mesh peer after initThomas Pedersen1-3/+5
Drivers need the station rate info when inserting a new sta_info. The patch "mac80211: refactor mesh peer initialization" wrongly assumed the rate info could be applied after insertion. After further review, this is clearly not the case. This fixes a regression where HT parameters were not applied before inserting the sta_info, causing performance degradation. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08mac80211: fix rate control update on 2040 bss changeRajkumar Manoharan1-1/+1
The rate control updation never be called on 2040 BSS change. The station should update its rate control on receiving beacon with different HT mode in the HT operation IE. Not doing so, leads to sending frames with higher(ht40) rates whereas AP is operating in lower mode (ht20). Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-5/+6
Conflicts: drivers/net/ethernet/intel/e1000e/param.c drivers/net/wireless/iwlwifi/iwl-agn-rx.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c drivers/net/wireless/iwlwifi/iwl-trans.h Resolved the iwlwifi conflict with mainline using 3-way diff posted by John Linville and Stephen Rothwell. In 'net' we added a bug fix to make iwlwifi report a more accurate skb->truesize but this conflicted with RX path changes that happened meanwhile in net-next. In e1000e a conflict arose in the validation code for settings of adapter->itr. 'net-next' had more sophisticated logic so that logic was used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30mac80211: fix AP mode EAP tx for VLAN stationsFelix Fietkau1-1/+2
EAP frames for stations in an AP VLAN are sent on the main AP interface to avoid race conditions wrt. moving stations. For that to work properly, sta_info_get_bss must be used instead of sta_info_get when sending EAP packets. Previously this was only done for cooked monitor injected packets, so this patch adds a check for tx->skb->protocol to the same place. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-26Merge branch 'master' of ↵John W. Linville14-118/+226
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c
2012-04-24mac80211: Adds clean sdata helperAndrei Emeltchenko2-5/+18
Adds hepler to clean sdata ieee80211_clean_sdata similar way as ieee80211_setup_sdata is implemented. The function will be used by other interfaces later. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-24mac80211: fix num_mcast_sta counting issuesFelix Fietkau2-4/+27
Moving a STA to an AP VLAN prevents num_mcast_sta from being decremented once the STA leaves, because sta->sdata changes. Fix this by checking for AP VLANs as well. Also exclude 4-addr VLAN stations from num_mcast_sta - remote 4-addr stations ignore 3-address multicast frames anyway. In a typical bridge configuration they receive the same packets as 4-address unicast. This patch also fixes clearing the sdata->u.vlan.sta pointer when the STA is removed from a 4-addr VLAN. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-24mac80211: rename AP variable num_sta_authorized to num_mcast_staFelix Fietkau4-6/+6
It is only used to test for BSS multicast receivers. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-24mac80211: check for non-managed interfaceWey-Yi Guy1-0/+4
Average beacon signal only keep tracked by managed interface, give warning and return 0 for the others. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-24mac80211: call ieee80211_mgd_stop() on interface stopEliad Peller3-4/+4
ieee80211_mgd_teardown() is called on netdev removal, which occurs after the vif was already removed from the low-level driver, resulting in the following warning: [ 4809.014734] ------------[ cut here ]------------ [ 4809.019861] WARNING: at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]() [ 4809.030388] wlan0: Failed check-sdata-in-driver check, flags: 0x4 [ 4809.036862] Modules linked in: wlcore_sdio(-) wl12xx wlcore mac80211 cfg80211 [last unloaded: cfg80211] [ 4809.046849] [<c001bd4c>] (unwind_backtrace+0x0/0x12c) [ 4809.055937] [<c047cf1c>] (dump_stack+0x20/0x24) [ 4809.065385] [<c003e334>] (warn_slowpath_common+0x5c/0x74) [ 4809.075589] [<c003e408>] (warn_slowpath_fmt+0x40/0x48) [ 4809.088291] [<bf033630>] (ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]) [ 4809.102844] [<bf067f84>] (ieee80211_destroy_auth_data+0x80/0xa4 [mac80211]) [ 4809.116276] [<bf068004>] (ieee80211_mgd_teardown+0x5c/0x74 [mac80211]) [ 4809.129331] [<bf043f18>] (ieee80211_teardown_sdata+0xb0/0xd8 [mac80211]) [ 4809.141595] [<c03b5e58>] (rollback_registered_many+0x228/0x2f0) [ 4809.153056] [<c03b5f48>] (unregister_netdevice_many+0x28/0x50) [ 4809.165696] [<bf041ea8>] (ieee80211_remove_interfaces+0xb4/0xdc [mac80211]) [ 4809.179151] [<bf032174>] (ieee80211_unregister_hw+0x50/0xf0 [mac80211]) [ 4809.191043] [<bf0bebb4>] (wlcore_remove+0x5c/0x7c [wlcore]) [ 4809.201491] [<c02c6918>] (platform_drv_remove+0x24/0x28) [ 4809.212029] [<c02c4d50>] (__device_release_driver+0x8c/0xcc) [ 4809.222738] [<c02c4e84>] (device_release_driver+0x30/0x3c) [ 4809.233099] [<c02c4258>] (bus_remove_device+0x10c/0x128) [ 4809.242620] [<c02c26f8>] (device_del+0x11c/0x17c) [ 4809.252150] [<c02c6de0>] (platform_device_del+0x28/0x68) [ 4809.263051] [<bf0df49c>] (wl1271_remove+0x3c/0x50 [wlcore_sdio]) [ 4809.273590] [<c03806b0>] (sdio_bus_remove+0x48/0xf8) [ 4809.283754] [<c02c4d50>] (__device_release_driver+0x8c/0xcc) [ 4809.293729] [<c02c4e2c>] (driver_detach+0x9c/0xc4) [ 4809.303163] [<c02c3d7c>] (bus_remove_driver+0xc4/0xf4) [ 4809.312973] [<c02c5a98>] (driver_unregister+0x70/0x7c) [ 4809.323220] [<c03809c4>] (sdio_unregister_driver+0x24/0x2c) [ 4809.334213] [<bf0df458>] (wl1271_exit+0x14/0x1c [wlcore_sdio]) [ 4809.344930] [<c009b1a4>] (sys_delete_module+0x228/0x2a8) [ 4809.354734] ---[ end trace 515290ccf5feb522 ]--- Rename ieee80211_mgd_teardown() to ieee80211_mgd_stop(), and call it on ieee80211_do_stop(). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-6/+8
Fix merge between commit 3adadc08cc1e ("net ax25: Reorder ax25_exit to remove races") and commit 0ca7a4c87d27 ("net ax25: Simplify and cleanup the ax25 sysctl handling") The former moved around the sysctl register/unregister calls, the later simply removed them. With help from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23mac80211: declare ieee80211_ave_rssi as EXPORTWey-Yi Guy1-0/+1
ieee80211_ave_rssi need to be declare as export for driver to use it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23mac80211: fixup for mesh TSF adjustment latency in Toffset setpointJavier Cardona1-1/+1
The original patch defined the correction margin but did not apply it. Signed-off-by: Shinichi Hotori <hotorinn@gmail.com> Signed-off-by: Yu Niiro <yu.niiro@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23mac80211: fix STA channel width fieldThomas Pedersen1-1/+3
According to IEEE 802.11 8.4.2.59, set the "STA channel width" bit to 0 if transmitting STA is using a 20mhz channel. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23mac80211: don't set mesh peer ht caps if ht disabledThomas Pedersen1-1/+2
Blindly setting ht caps on a mesh peer's station entry would result in MCS rates being used by the rate control algorithm even if no ht had been configured. Fix this by checking the channel type before assigning ht capabilites. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>