summaryrefslogtreecommitdiffstats
path: root/net/mac80211/rc80211_minstrel.c
AgeCommit message (Collapse)AuthorFilesLines
2019-10-11mac80211: minstrel_ht: rename prob_ewma to prob_avg, use it for the new averageFelix Fietkau1-20/+20
Reduces per-rate data structure size Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20191008171139.96476-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-11mac80211: minstrel_ht: replace rate stats ewma with a better moving averageFelix Fietkau1-4/+9
Rate success probability usually fluctuates a lot under normal conditions. With a simple EWMA, noise and fluctuation can be reduced by increasing the window length, but that comes at the cost of introducing lag on sudden changes. This change replaces the EWMA implementation with a moving average that's designed to significantly reduce lag while keeping a bigger window size by being better at filtering out noise. It is only slightly more expensive than the simple EWMA and still avoids divisions in its calculation. The algorithm is adapted from an implementation intended for a completely different field (stock market trading), where the tradeoff of lag vs noise filtering is equally important. It is based on the "smoothing filter" from http://www.stockspotter.com/files/PredictiveIndicators.pdf. I have adapted it to fixed-point math with some constants so that it uses only addition, bit shifts and multiplication To better make use of the filtering and bigger window size, the update interval time is cut in half. For testing, the algorithm can be reverted to the older one via debugfs Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20191008171139.96476-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-11mac80211: minstrel: remove divisions in tx status pathFelix Fietkau1-2/+1
Use a slightly different threshold for downgrading spatial streams to make it easier to calculate without divisions. Slightly reduces CPU overhead. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20191008171139.96476-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: call rate_control_send_low() internallyJohannes Berg1-4/+0
There's no rate control algorithm that *doesn't* want to call it internally, and calling it internally will let us modify its behaviour in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-11mac80211: rc80211_minstrel: remove variance / stddev calculationFelix Fietkau1-6/+0
When there are few packets (e.g. for sampling attempts), the exponentially weighted variance is usually vastly overestimated, making the resulting data essentially useless. As far as I know, there has not been any practical use for this, so let's not waste any cycles on it. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-11mac80211: minstrel: merge with minstrel_ht, always enable VHT supportFelix Fietkau1-152/+0
Legacy-only devices are not very common and the overhead of the extra code for HT and VHT rates is not big enough to justify all those extra lines of code to make it optional. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-11mac80211: minstrel: remove unnecessary debugfs cleanup codeFelix Fietkau1-6/+2
debugfs entries are cleaned up by debugfs_remove_recursive already. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02mac80211: Remove unused initializationMasashi Honma1-1/+1
The variable j will be initialized at trailing step. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-07-24net: remove blank lines at end of fileStephen Hemminger1-1/+0
Several files have extra line at end of file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-26net: Use octal not symbolic permissionsJoe Perches1-1/+1
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28mac80211: make rate control tx status API more extensibleFelix Fietkau1-3/+3
Rename .tx_status_noskb to .tx_status_ext and pass a new on-stack struct ieee80211_tx_status instead of struct ieee80211_tx_info. This struct can be used to pass extra information, e.g. for dynamic tx power control Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-15mac80211: minstrel: avoid port control frames for samplingThomas Huehn1-0/+5
Makes connections more reliable Signed-off-by: Thomas Huehn <thomas.huehn@evernet-eg.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-15mac80211: minstrel: store probability variance instead of standard deviationFelix Fietkau1-4/+4
This avoids the costly int_sqrt calls in the statistics update and moves it to the debugfs code instead. This also fixes an overflow in the previous standard deviation calculation. Signed-off-by: Thomas Huehn <thomas.huehn@evernet-eg.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-15mac80211: minstrel: remove cur_prob from debugfsFelix Fietkau1-4/+6
This field is redundant, because it is simply last success divided by last attempt count. Removing it from the rate stats struct saves about 1.2 KiB per HT station. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg1-3/+3
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-02mac80211: minstrel: Change expected throughput unit back to KbpsSven Eckelmann1-1/+1
The change from cur_tp to the function minstrel_get_tp_avg/minstrel_ht_get_tp_avg changed the unit used for the current throughput. For example in minstrel_ht the correct conversion between them would be: mrs->cur_tp / 10 == minstrel_ht_get_tp_avg(..). This factor 10 must also be included in the calculation of minstrel_get_expected_throughput and minstrel_ht_get_expected_throughput to return values with the unit [Kbps] instead of [10Kbps]. Otherwise routing algorithms like B.A.T.M.A.N. V will make incorrect decision based on these values. Its kernel based implementation expects expected_throughput always to have the unit [Kbps] and not sometimes [10Kbps] and sometimes [Kbps]. The same requirement has iw or olsrdv2's nl80211 based statistics module which retrieve the same data via NL80211_STA_INFO_TX_BITRATE. Cc: stable@vger.kernel.org Fixes: 6a27b2c40b48 ("mac80211: restructure per-rate throughput calculation into function") Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-13mac80211: fix invalid read in minstrel_sort_best_tp_rates()Adrien Schildknecht1-5/+6
At the last iteration of the loop, j may equal zero and thus tp_list[j - 1] causes an invalid read. Change the logic of the loop so that j - 1 is always >= 0. Cc: stable@vger.kernel.org Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01mac80211: add standard deviation to Minstrel statsThomas Huehn1-5/+14
This patch adds the statistical descriptor "standard deviation" to better describe the current properties of Minstrel and Minstrel-HTs success probability distribution. The standard deviation (SD) is calculated as exponential weighted moving standard deviation (EWMSD) and its current value is added as new column in all rc_stats (in debugfs). Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01mac80211: add max lossless throughput per rateThomas Huehn1-8/+19
This patch adds the new statistic "maximum possible lossless throughput" to Minstrels and Minstrel-HTs rc_stats (in debugfs). This enables comprehensive comparison between current per-rate throughput and max. achievable per-rate throughput. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01mac80211: restructure per-rate throughput calculation into functionThomas Huehn1-15/+28
This patch moves Minstrels and Minstrel-HTs per-rate throughput calculation (EWMA(thr)) into a dedicated function to be called. Therefore the variable "unsigned int cur_tp" within struct "minstrel_rate_stats" becomes obsolete. and is removed to free up its space. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01mac80211: improve Minstrel variable & function namingThomas Huehn1-13/+13
This patch ensures a consistent usage of variable names for type "minstrel_rate_stats" to be used as "mrs" and from type minstrel_rate as "mr" across both Minstrel & Minstrel-HT. In addition some variable and function names got changed to more meaningful ones. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01mac80211: unify Minstrel & Minstrel-HTs calculation of rate statisticsThomas Huehn1-16/+28
This patch unifies the calculation of Minstrels and Minstrel-HTs per-rate statistic. The new common function minstrel_calc_rate_stats() is called when a statistic update is performed. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-24mac80211/minstrel: fix !x!=0 confusionJiri Slaby1-1/+1
Commit 06d961a8e210 ("mac80211/minstrel: use the new rate control API") inverted the condition 'if (msr->sample_limit != 0)' to 'if (!msr->sample_limit != 0)'. But it is confusing both to people and compilers (gcc5): net/mac80211/rc80211_minstrel.c: In function 'minstrel_get_rate': net/mac80211/rc80211_minstrel.c:376:26: warning: logical not is only applied to the left hand side of comparison if (!msr->sample_limit != 0) ^ Let there be only 'if (!msr->sample_limit)'. Fixes: 06d961a8e210 ("mac80211/minstrel: use the new rate control API") Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-19mac80211: minstrel: reduce size of struct minstrel_rate_statsFelix Fietkau1-3/+3
On minstrel_ht, the size of the per-sta struct is almost 18k, making it an order-3 allocation. A few fields inside the per-rate statistics are bigger than they need to be. This patch reduces the size enough to cut down the per-sta struct to about 13k (order-2 allocation). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: minstrel: switch to .tx_status_noskbFelix Fietkau1-3/+2
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-31mac80211: fix spelling errorsStephen Hemminger1-1/+1
Use codespell to find spelling errors. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11mac80211: Unify rate statistic variables between Minstrel & Minstrel_HTThomas Huehn1-47/+51
Minstrel and Mintrel_HT used there own structs to keep track of rate statistics. Unify those variables in struct minstrel_rate_states and move it to rc80211_minstrel.h for common usage. This is a clean-up patch to prepare Minstrel and Minstrel_HT codebase for upcoming TPC. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-21mac80211: export the expected throughputAntonio Quartulli1-0/+12
Add get_expected_throughput() API to mac80211 so that each driver can implement its own version based on the RC algorithm they are using (might be using an HW RC algo). The API returns a value expressed in Kbps. Also, add the new get_expected_throughput() member to the rate_control_ops structure in order to be able to query the RC algorithm (this patch provides an implementation of this API for both minstrel and minstrel_ht). The related member in the station_info object is now filled accordingly when dumping a station. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: make rate control ops constJohannes Berg1-1/+1
Change the code to allow making all the rate control ops const, nothing ever needs to change them. Also change all drivers to make use of this and mark the ops const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18mac80211: fix checkpatch errorsWeilong Chen1-4/+4
Fix a number of different checkpatch errors. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: minstrels: spare numerous useless calls to get_random_bytesKarl Beldan1-2/+1
ATM, only the first array value returned by get_random_bytes is used. This change moves the call to get_random_bytes from the nested loop it is in to its parent. While at it, replace get_random_bytes with prandom_bytes since PRNs are way enough for the selection process. After this, minstrel_ht reclaims 80 PR-bytes instead of 640 R-bytes. minstrels use sample tables to probe different rates in a randomized manner. minstrel_ht inits one single sample table upon registration (during subsys_initcalls) and minstrel uses one per STA addition in minstrel. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: add fixed_rate management to minstrel rcLorenzo Bianconi1-0/+14
Add the capability to use a fixed modulation rate to minstrel rate controller Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01Merge branch 'for-john' of ↵John W. Linville1-7/+26
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-07-16mac80211/minstrel: fix NULL pointer dereference issueFelix Fietkau1-1/+2
When priv_sta == NULL, mi->prev_sample is dereferenced too early. Move the assignment further down, after the rate_control_send_low call. Reported-by: Krzysztof Mazur <krzysiek@podlesie.net> Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: fix timing for 5 MHz and 10 MHz channelsSimon Wunderlich1-6/+24
according to IEEE 802.11-2012 section 18, various timings change when using 5 MHz and 10 MHz. Reflect this by using a "shift" when calculating durations. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211/rc80211: add chandef to rate initializationSimon Wunderlich1-1/+2
5 and 10 MHz support needs to know the current operating channel width, add the chandef to the rate control API. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-04-22mac80211/minstrel: use the new rate control APIFelix Fietkau1-91/+109
Pass the rate selection table to mac80211 from minstrel_update_stats. Only rates for sample attempts are set in info->control.rates, with deferred sampling, only the second slot gets changed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: fix CTS protection handlingFelix Fietkau1-2/+4
The rates[0] CTS and RTS flags are only set after rate control has been called, so minstrel cannot use them to for setting the number of retries. This patch adds two new flags to explicitly indicate RTS/CTS use. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: improve minstrels rate sorting by means of throughput & probabilityThomas Huehn1-31/+40
This patch improves the way minstrel sorts rates according to throughput and success probability. 3 FOR-loops across the entire rate set in function minstrel_update_stats() which where used to determine the fastest, second fastest and most robust rate are reduced to 1 FOR-loop. The sorted list of rates according throughput is extended to the best four rates as we need them in upcoming joint rate and power control. The sorting is done via the new function minstrel_sort_best_tp_rates(). The most robust rate selection is aligned with minstrel_ht's approach. Once any success probability is above 95% the one with the highest throughput is chosen as most robust rate. If success probabilities of all rates are below 95%, the rate with the highest succ. prob. is elected as most robust one Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: treat minstrel success probabilities below 10% as implausibleThomas Huehn1-1/+6
Based on minstrel_ht this patch treats success probabilities below 10% as implausible values for throughput calculation in minstrel's statistics. Current throughput per rate with such a low success probability is reset to 0 MBit/s. Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: add lowest rate into minstrel's random rate sampling tableThomas Huehn1-13/+7
While minstrel bootstraps and fills the success probabilities of each rate the lowest rate has typically a very high success probability (often 100% in our tests). Its statistics are never updated but considered to setup the mrr chain. In our tests we see that especially the 3rd mrr stage (which is that rate providing highest success probability) is filled with the lowest rate because its initial high sucess probability is never updated. By design the 4th mrr stage is filled with the lowest rate so often 3rd and 4th mrr stage are equal. This patch follows minstrels general approach of assuming as little as possible about rate dependencies. Consequently we include the lowest rate into the random sampling table to get balanced up-to-date statistics of all rates and therefore balanced decisions. Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: extend minstrel's rate sampling to avoid unsampled ratesThomas Huehn1-4/+9
Minstrel's decision which rate should be directly sampled within the 1st mrr stage is limited to such rates faster than the current max throughput rate. All rates below the current max. throughput rate are indirectly sampled via the 2nd mrr stage. This approach leads to deprecated per rate statistics and therfore a deprecated mrr chain setup. This patch uses the sampling approach from minstrel_ht. A counter is added to sum all indirect sample attempts per rate. After 20 indirect sampling attempts the rate is directly sampled within the 1st mrr stage. Therefore more up-to-date statistics for all rates are maintained and used to setup the mrr chain. Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: add documentation and verbose variable names inThomas Huehn1-32/+49
Add documentation and more verbose variable names to minstrel's multi-rate-retry setup within function minstrel_get_rate() to increase the readability of the algorithm. Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: merge value scaling macros of minstrel_ht and minstrelThomas Huehn1-5/+4
Both minstrel versions use individual ways to scale up integer values to perform calculations. Merge minstrel_ht's scaling macros into minstrels header file and use them in both minstrel versions. Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: merge EWMA calculation of minstrel_ht and minstrelThomas Huehn1-10/+5
Both rate control algorithms (minstrel and minstrel_ht) calculate averages based on EWMA. Shift function minstrel_ewma() into rc80211_minstrel.h and make use of it in both minstrel version. Also shift the default EWMA level (75%) definition to the header file and clean up variable usage. Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-13mac80211/minstrel_ht: add support for using CCK ratesFelix Fietkau1-0/+29
When MCS rates start to get bad in 2.4 GHz because of long range or strong interference, CCK rates can be a lot more robust. This patch adds a pseudo MCS group containing CCK rates (long preamble in the lower 4 slots, short preamble in the upper slots). Signed-off-by: Felix Fietkau <nbd@openwrt.org> [make minstrel_ht_get_stats static] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-10minstrel: update stats after processing statusJohannes Berg1-4/+5
Instead of updating stats before sending a packet, update them after processing the packet's status. This makes minstrel in line with minstrel_ht. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-04-13mac80211: remove hw.conf.channel usage where possibleMichal Kazior1-6/+7
Removes hw.conf.channel usage from the following functions: * ieee80211_mandatory_rates * ieee80211_sta_get_rates * ieee80211_frame_duration * ieee80211_rts_duration * ieee80211_ctstoself_duration This is in preparation for multi-channel operation. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 23:42:20 +0000