summaryrefslogtreecommitdiffstats
path: root/net/mac80211/mlme.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-19Merge tag 'wireless-next-2022-05-19' of ↵Jakub Kicinski1-43/+74
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.19 Second set of patches for v5.19 and most likely the last one. rtw89 got support for 8852ce devices and mt76 now supports Wireless Ethernet Dispatch. Major changes: cfg80211/mac80211 - support disabling EHT mode rtw89 - add support for Realtek 8852ce devices mt76 - Wireless Ethernet Dispatch support for flow offload - non-standard VHT MCS10-11 support - mt7921 AP mode support - mt7921 ipv6 NS offload support ath11k - enable keepalive during WoWLAN suspend - implement remain-on-channel support * tag 'wireless-next-2022-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (135 commits) iwlwifi: mei: fix potential NULL-ptr deref iwlwifi: mei: clear the sap data header before sending iwlwifi: mvm: remove vif_count iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS iwlwifi: mvm: add OTP info in case of init failure iwlwifi: mvm: fix assert 1F04 upon reconfig iwlwifi: fw: init SAR GEO table only if data is present iwlwifi: mvm: clean up authorized condition iwlwifi: mvm: use NULL instead of ERR_PTR when parsing wowlan status iwlwifi: pcie: simplify MSI-X cause mapping rtw89: pci: only mask out INT indicator register for disable interrupt v1 rtw89: convert rtw89_band to nl80211_band precisely rtw89: 8852c: update txpwr tables to HALRF_027_00_052 rtw89: cfo: check mac_id to avoid out-of-bounds rtw89: 8852c: set TX antenna path rtw89: add ieee80211::sta_rc_update ops wireless: Fix Makefile to be in alphabetical order mac80211: refactor freeing the next_beacon cfg80211: fix kernel-doc for cfg80211_beacon_data mac80211: minstrel_ht: support ieee80211_rate_status ... ==================== Link: https://lore.kernel.org/r/20220519153334.8D051C385AA@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-16mac80211: mlme: track assoc_bss/associated separatelyJohannes Berg1-8/+10
We currently track whether we're associated and which the BSS is in the same variable (ifmgd->associated), but for MLD we'll need to move the BSS pointer to be per link, while the question whether we're associated or not is for the whole interface. Add ifmgd->assoc_bss that stores the pointer and change ifmgd->associated to be just a bool, so the question of whether we're associated can continue working after MLD rework, without requiring changes, while the BSS pointer will have to be changed/used checked per link. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-16mac80211: remove useless bssid copyJohannes Berg1-3/+1
We don't need to copy this locally, we now only use the variable to print before doing other things. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-16mac80211: remove unused argument to ieee80211_sta_connection_lost()Johannes Berg1-6/+4
We never use the bssid argument to ieee80211_sta_connection_lost() so we might as well just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-16mac80211: mlme: use local SSID copyJohannes Berg1-12/+2
There's no need to look it up from the ifmgd->associated BSS configuration, we already maintain a local copy since commit b0140fda626e ("mac80211: mlme: save ssid info to ieee80211_bss_conf while assoc"). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-16mac80211: use ifmgd->bssid instead of ifmgd->associated->bssidJohannes Berg1-17/+17
Since we always track the BSSID there when we get associated, these are equivalent, but ifmgd->bssid saves a dereference and thus makes the code a bit smaller, and more readable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-16mac80211: mlme: move in RSSI reporting codeJohannes Berg1-0/+40
This code is tightly coupled to the sdata->u.mgd data structure, so there's no reason for it to be in utils. Move it to mlme.c. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+6
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04mac80211: support disabling EHT modeMuna Sinada1-0/+3
Allow userspace to disable EHT mode. This forces EHT capable interfaces to disable during association. Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20220323224636.20211-2-quic_alokad@quicinc.com [remove stray message change] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-04mac80211: Reset MBSSID parameters upon connectionManikanta Pubbisetty1-0/+6
Currently MBSSID parameters in struct ieee80211_bss_conf are not reset upon connection. This could be problematic with some drivers in a scenario where the device first connects to a non-transmit BSS and then connects to a transmit BSS of a Multi BSS AP. The MBSSID parameters which are set after connecting to a non-transmit BSS will not be reset and the same parameters will be passed on to the driver during the subsequent connection to a transmit BSS of a Multi BSS AP. For example, firmware running on the ath11k device uses the Multi BSS data for tracking the beacon of a non-transmit BSS and reports the driver when there is a beacon miss. If we do not reset the MBSSID parameters during the subsequent connection to a transmit BSS, then the driver would have wrong MBSSID data and FW would be looking for an incorrect BSSID in the MBSSID beacon of a Multi BSS AP and reports beacon loss leading to an unstable connection. Reset the MBSSID parameters upon every connection to solve this problem. Fixes: 78ac51f81532 ("mac80211: support multi-bssid") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Link: https://lore.kernel.org/r/20220428052744.27040-1-quic_mpubbise@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R1-9/+9
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-15mac80211: always have ieee80211_sta_restart()Johannes Berg1-1/+1
When CONFIG_PM isn't defined we don't have the function ieee80211_sta_restart() compiled in, but we always need it now for firmware restart. Move it out of the ifdef. Fixes: 7d352ccf1e99 ("mac80211: Add support to trigger sta disconnect on hardware restart") Link: https://lore.kernel.org/r/20220312221957.1fa96c72db51.I8ecaa5f9402fede0272161e0531ab930b97fba3e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-11Merge tag 'wireless-next-2022-03-11' of ↵Jakub Kicinski1-24/+160
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== brcmfmac * add BCM43454/6 support rtw89 * add support for 160 MHz channels and 6 GHz band * hardware scan support iwlwifi * support UHB TAS enablement via BIOS * remove a bunch of W=1 warnings * add support for channel switch offload * support 32 Rx AMPDU sessions in newer devices * add support for a couple of new devices * add support for band disablement via BIOS mt76 * mt7915 thermal management improvements * SAR support for more mt76 drivers * mt7986 wmac support on mt7915 ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band ath6kl * add device ID for WLU5150-D81 cfg80211/mac80211 * initial EHT (from 802.11be) support (EHT rates, 320 MHz, larger block-ack) * support disconnect on HW restart * tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits) mac80211: Add support to trigger sta disconnect on hardware restart mac80211: fix potential double free on mesh join mac80211: correct legacy rates check in ieee80211_calc_rx_airtime nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE rtw89: 8852c: process logic efuse map rtw89: 8852c: process efuse of phycap rtw89: support DAV efuse reading operation rtw89: 8852c: add chip::dle_mem rtw89: add page_regs to handle v1 chips rtw89: add chip_info::{h2c,c2h}_reg to support more chips rtw89: add hci_func_en_addr to support variant generation rtw89: add power_{on/off}_func rtw89: read chip version depends on chip ID rtw89: pci: use a struct to describe all registers address related to DMA channel rtw89: pci: add V1 of PCI channel address rtw89: pci: add struct rtw89_pci_info rtw89: 8852c: add 8852c empty files MAINTAINERS: add devicetree bindings entry for mt76 ... ==================== Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11mac80211: Add support to trigger sta disconnect on hardware restartYoughandhar Chintala1-0/+12
Currently in case of target hardware restart, we just reconfig and re-enable the security keys and enable the network queues to start data traffic back from where it was interrupted. Many ath10k wifi chipsets have sequence numbers for the data packets assigned by firmware and the mac sequence number will restart from zero after target hardware restart leading to mismatch in the sequence number expected by the remote peer vs the sequence number of the frame sent by the target firmware. This mismatch in sequence number will cause out-of-order packets on the remote peer and all the frames sent by the device are dropped until we reach the sequence number which was sent before we restarted the target hardware In order to fix this, we trigger a sta disconnect, in case of target hw restart. After this there will be a fresh connection and thereby avoiding the dropping of frames by remote peer. The right fix would be to pull the entire data path into the host which is not feasible or would need lots of complex changes and will still be inefficient. Tested on ath10k using WCN3990, QCA6174 Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org> Link: https://lore.kernel.org/r/20220308115325.5246-2-youghand@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+12
net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-01mac80211: treat some SAE auth steps as finalJohannes Berg1-4/+12
When we get anti-clogging token required (added by the commit mentioned below), or the other status codes added by the later commit 4e56cde15f7d ("mac80211: Handle special status codes in SAE commit") we currently just pretend (towards the internal state machine of authentication) that we didn't receive anything. This has the undesirable consequence of retransmitting the prior frame, which is not expected, because the timer is still armed. If we just disarm the timer at that point, it would result in the undesirable side effect of being in this state indefinitely if userspace crashes, or so. So to fix this, reset the timer and set a new auth_data->waiting in order to have no more retransmissions, but to have the data destroyed when the timer actually fires, which will only happen if userspace didn't continue (i.e. crashed or abandoned it.) Fixes: a4055e74a2ff ("mac80211: Don't destroy auth data in case of anti-clogging") Reported-by: Jouni Malinen <j@w1.fi> Link: https://lore.kernel.org/r/20220224103932.75964e1d7932.Ia487f91556f29daae734bf61f8181404642e1eec@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-8/+21
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16mac80211: Handle station association response with EHTIlan Peer1-0/+15
When the association is an EHT association, parse the EHT element from the association response and update the station's EHT capabilities accordingly. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.f33574718755.I21182234c5303d9423eabd5eb997e7cf75f8e0c8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: Add EHT capabilities to association/probe requestIlan Peer1-1/+47
Add the EHT capabilities element to both probe request and association request frames, if advertised by the driver. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.2ec94388acee.I40d2ef06099cb091e9c2c01f8ef521b993a3d559@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: Add initial support for EHT and 320 MHz channelsIlan Peer1-23/+86
Add initial support for EHT and 320 MHz bandwidth in mac80211. As a new IEEE80211_STA_RX_BW_320 is added to enum ieee80211_sta_rx_bandwidth, update the drivers to avoid compilation warnings. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.0f144cc0bba6.Iad18111264da87eed5fd7b017f0cc6e58c604e07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: mlme: validate peer HE supported ratesMordechay Goodstein1-1/+100
We validate that AP has mandatory rates set in HE capabilities. Also we make sure AP is consistent with itself on rates set in HE basic rates required joining the BSS and rates set in HE capabilities. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.7023450fdf16.I194df59252097ba25a0a543456d4350f1607a538@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: mlme: add documentation from spec to codeMordechay Goodstein1-1/+9
Reference the spec why we decline HE support in case STA don't support all HE basic rates recurred by AP. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.f1bafd0861b7.I566612d99bca5245dc06cbcc70369b94a525389c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: consider RX NSS in UHB connectionMordechay Goodstein1-3/+58
In UHB connection we don't have any HT/VHT elemens so in order to calculate the max RX-NSS we need also to look at HE capa element, this causes to limit us to max rx nss in UHB to 1. Also anyway we need to look at HE max rx NSS and not only at HT/VHT capa to determine the max rx nss over the connection. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.3713e0dea5dd.I3b9a15b4c53465c3f86f35459e9dc15ae4ea2abd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: limit bandwidth in HE capabilitiesJohannes Berg1-3/+8
If we're limiting bandwidth for some reason such as regulatory restrictions, then advertise that limitation just like we do for VHT today, so the AP is aware we cannot use the higher BW it might be using. Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.70c8e3e7ee76.If317630de69ff1146bec7d47f5b83038695eb71d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-31mac80211: mlme: check for null after calling kmemdupJiasheng Jiang1-8/+21
As the possible failure of the alloc, the ifmgd->assoc_req_ies might be NULL pointer returned from kmemdup(). Therefore it might be better to free the skb and return error in order to fail the association, like ieee80211_assoc_success(). Also, the caller, ieee80211_do_assoc(), needs to deal with the return value from ieee80211_send_assoc(). Fixes: 4d9ec73d2b78 ("cfg80211: Report Association Request frame IEs in association events") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220105081559.2387083-1-jiasheng@iscas.ac.cn [fix some paths to be errors, not success] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-04mac80211: use ieee80211_bss_get_elem()Johannes Berg1-7/+7
Instead of ieee80211_bss_get_ie(), use the more typed ieee80211_bss_get_elem(). Link: https://lore.kernel.org/r/20211220113609.56f8e2a70152.Id5a56afb8a4f9b38d10445e5a1874e93e84b5251@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-04mac80211: initialize variable have_higher_than_11mbitTom Rix1-1/+1
Clang static analysis reports this warnings mlme.c:5332:7: warning: Branch condition evaluates to a garbage value have_higher_than_11mbit) ^~~~~~~~~~~~~~~~~~~~~~~ have_higher_than_11mbit is only set to true some of the time in ieee80211_get_rates() but is checked all of the time. So have_higher_than_11mbit needs to be initialized to false. Fixes: 5d6a1b069b7f ("mac80211: set basic rates earlier") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-21Merge tag 'mac80211-next-for-net-next-2021-12-21' of ↵Jakub Kicinski1-16/+37
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * ndo_fill_forward_path support in mac80211, to let drivers use it * association comeback notification for userspace, to be able to react more sensibly to long delays * support for background radar detection hardware in some chipsets * SA Query Procedures offload on the AP side * more logging if we find problems with HT/VHT/HE * various cleanups and minor fixes Conflicts: net/wireless/reg.c: e08ebd6d7b90 ("cfg80211: Acquire wiphy mutex on regulatory work") 701fdfe348f7 ("cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface") https://lore.kernel.org/r/20211221111950.57ecc6a7@canb.auug.org.au drivers/net/wireless/ath/ath10k/wmi.c: 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel") 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel") https://lore.kernel.org/r/20211221115004.1cd6b262@canb.auug.org.au * tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (32 commits) cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface rfkill: allow to get the software rfkill state cfg80211: refactor cfg80211_get_ies_channel_number() nl82011: clarify interface combinations wrt. channels nl80211: Add support to offload SA Query procedures for AP SME device nl80211: Add support to set AP settings flags with single attribute mac80211: add more HT/VHT/HE state logging cfg80211: Use the HE operation IE to determine a 6GHz BSS channel cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard mac80211: Notify cfg80211 about association comeback cfg80211: Add support for notifying association comeback mac80211: introduce channel switch disconnect function cfg80211: Fix order of enum nl80211_band_iftype_attr documentation cfg80211: simplify cfg80211_chandef_valid() mac80211: Remove a couple of obsolete TODO mac80211: fix FEC flag in radio tap header mac80211: use coarse boottime for airtime fairness code ieee80211: change HE nominal packet padding value defines cfg80211: use ieee80211_bss_get_elem() instead of _get_ie() mac80211: Use memset_after() to clear tx status ... ==================== Link: https://lore.kernel.org/r/20211221112532.28708-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20mac80211: add more HT/VHT/HE state loggingJohannes Berg1-12/+33
Add more logging in places that affect HT/VHT/HE state, so things get easier to debug. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211130131608.ac51d574458c.If197b45c5b31d2fbd254fa12c2d7c736f304d4ae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20mac80211: Notify cfg80211 about association comebackIlan Peer1-0/+4
Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.d76eac9e51ee.I986cffab95d51adfee6d84964711644392005113@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20mac80211: Remove a couple of obsolete TODOIlan Peer1-4/+0
The HE capability IE is an extension IE so remove an irrelevant comments. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.550b95b5fca7.Ia31395e880172aefcc0a8c70ed060f84b94bdb83@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26mac80211: track only QoS data frames for admission controlJohannes Berg1-3/+10
For admission control, obviously all of that only works for QoS data frames, otherwise we cannot even access the QoS field in the header. Syzbot reported (see below) an uninitialized value here due to a status of a non-QoS nullfunc packet, which isn't even long enough to contain the QoS header. Fix this to only do anything for QoS data packets. Reported-by: syzbot+614e82b88a1a4973e534@syzkaller.appspotmail.com Fixes: 02219b3abca5 ("mac80211: add WMM admission control support") Link: https://lore.kernel.org/r/20211122124737.dad29e65902a.Ieb04587afacb27c14e0de93ec1bfbefb238cc2a0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: Prevent AP probing during suspendLoic Poulain1-0/+7
Submitting AP probe/null during suspend can cause unexpected disconnect on resume because of timeout waiting for ack status: wlan0: Failed to send nullfunc to AP 11:22:33:44:55:66 after 500ms, disconnecting This is especially the case when we enter suspend when a scan is ongoing, indeed, scan is cancelled from __ieee80211_suspend, leading to a corresponding (aborted) scan complete event, which in turn causes the submission of an immediate monitor null frame (restart_sta_timer). The corresponding packet or ack will not be processed before resuming, causing a timeout & disconnect on resume. Delay the AP probing when suspending/suspended. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1634805927-1113-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21nl80211: Add LC placeholder band definition to nl80211_bandSrinivasan Raju1-0/+1
Define LC band which is a draft under IEEE 802.11bb. Current NL80211_BAND_LC is a placeholder band and will be more defined IEEE 802.11bb progresses. Signed-off-by: Srinivasan Raju <srini.raju@purelifi.com> Link: https://lore.kernel.org/r/20211018100143.7565-2-srini.raju@purelifi.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: use ieee80211_bss_get_elem() in most placesJohannes Berg1-21/+22
There are a number of uses of ieee80211_bss_get_ie(), replace most of them with ieee80211_bss_get_elem(). Link: https://lore.kernel.org/r/20210930131130.9a413f12a151.I0699ba7e48c9d88dbbfa3107cf4d34a8345d02a0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: fix memory leaks with element parsingJohannes Berg1-18/+18
My previous commit 5d24828d05f3 ("mac80211: always allocate struct ieee802_11_elems") had a few bugs and leaked the new allocated struct in a few error cases, fix that. Fixes: 5d24828d05f3 ("mac80211: always allocate struct ieee802_11_elems") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20211001211108.9839928e42e0.Ib81ca187d3d3af7ed1bfeac2e00d08a4637c8025@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-27mac80211: save transmit power envelope element and power constraintWen Gong1-0/+29
This is to save the transmit power envelope element and power constraint in struct ieee80211_bss_conf for 6 GHz. Lower driver will use this info to calculate the power limit. Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/20210924100052.32029-7-wgong@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-24mac80211: use ieee802_11_parse_elems() in ieee80211_prep_channel()Wen Gong1-37/+22
In function ieee80211_prep_channel(), it has some ieee80211_bss_get_ie() and cfg80211_find_ext_ie() to get the IE, this is to use another function ieee802_11_parse_elems() to get all the IEs in one time. Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/20210924100052.32029-6-wgong@codeaurora.org [remove now unnecessary size validation, use -ENOMEM, free elems earlier for less error handling code] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23mac80211: always allocate struct ieee802_11_elemsJohannes Berg1-76/+100
As the 802.11 spec evolves, we need to parse more and more elements. This is causing the struct to grow, and we can no longer get away with putting it on the stack. Change the API to always dynamically allocate and return an allocated pointer that must be kfree()d later. As an alternative, I contemplated a scheme whereby we'd say in the code which elements we needed, e.g. DECLARE_ELEMENT_PARSER(elems, SUPPORTED_CHANNELS, CHANNEL_SWITCH, EXT(KEY_DELIVERY)); ieee802_11_parse_elems(..., &elems, ...); and while I think this is possible and will save us a lot since most individual places only care about a small subset of the elements, it ended up being a bit more work since a lot of places do the parsing and then pass the struct to other functions, sometimes with multiple levels. Link: https://lore.kernel.org/r/20210920154009.26caff6b5998.I05ae58768e990e611aee8eca8abefd9d7bc15e05@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23mac80211: mlme: find auth challenge directlyJohannes Berg1-5/+6
There's no need to parse all elements etc. just to find the authentication challenge - use cfg80211_find_elem() instead. This also allows us to remove WLAN_EID_CHALLENGE handling from the element parsing entirely. Link: https://lore.kernel.org/r/20210920154009.45f9b3a15722.Ice3159ffad03a007d6154cbf1fb3a8c48489e86f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23mac80211: move CRC into struct ieee802_11_elemsJohannes Berg1-4/+5
We're currently returning this value, but to prepare for returning the allocated structure, move it into there. Link: https://lore.kernel.org/r/20210920154009.479b8ebf999d.If0d4ba75ee38998dc3eeae25058aa748efcb2fc9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-23mac80211: fix enabling 4-address mode on a sta vif after assocFelix Fietkau1-2/+2
Notify the driver about the 4-address mode change and also send a nulldata packet to the AP to notify it about the change Fixes: 1ff4e8f2dec8 ("mac80211: notify the driver when a sta uses 4-address mode") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210702050111.47546-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23Revert "mac80211: HE STA disassoc due to QOS NULL not sent"Ping-Ke Shih1-4/+1
This reverts commit f39b07fdfb68 ("mac80211: HE STA disassoc due to QOS NULL not sent") Since iwlwifi specific workaround, which blocks to send NDP, is removed, we can revert this commit. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/20210623134826.10318-2-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: notify driver on mgd TX completionJohannes Berg1-17/+54
We have mgd_prepare_tx(), but sometimes drivers may want/need to take action when the exchange finishes, whether successfully or not. Add a notification to the driver on completion, i.e. call the new method mgd_complete_tx(). To unify the two scenarios, and to add more information, make both of them take a struct that has the duration (prepare only), subtype (both) and success (complete only). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: add vendor-specific capabilities to assoc requestJohannes Berg1-2/+10
When sending an association request, add any vendor specific capabilities at the end of the frame. This way, mac80211 is still completely in charge of building the frame, but drivers can determine what should be added depending on the band and interface type. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.80d716d69a5f.I28097ff19be6b22aebdc33a72795d2662755d41f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: fix some spelling mistakesZheng Yongjun1-1/+1
Fix some spelling mistakes in comments: freeed ==> freed addreses ==> addresses containging ==> containing capablity ==> capability sucess ==> success atleast ==> at least Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20210607150047.2855962-1-zhengyongjun3@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: remove use of ieee80211_get_he_sta_cap()Johannes Berg1-9/+17
All uses of ieee80211_get_he_sta_cap() were actually wrong, in net/mac80211/mlme.c they were wrong because that code is also used for P2P (which is a different interface type), in net/mac80211/main.c that should check all interface types. Fix all that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.ede114bc8b46.Ibcd9a5d98430e936344eb6d242ef8a65c2f59b74@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: improve AP disconnect messageJohannes Berg1-2/+2
If the AP changes capability/bandwidth in some fashion, the message might be somewhat misleading and we don't know what really changed. Modify the message to speak about "caps/bw" instead of just "bandwidth", and print out the flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.dc22c48985fa.I4bf5fbc17ec783c21d4b50c8c35b1de390896ccd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: add to bss_conf if broadcast TWT is supportedShaul Triebitz1-0/+18
Add to struct ieee80211_bss_conf a twt_broadcast field. Set it to true if both STA and AP support broadcast TWT. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.f7c105237541.I50b302044e2b35e5ed4d3fb8bc7bd3d8bb89b1e1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 08:21:01 +0000