summaryrefslogtreecommitdiffstats
path: root/net/mac80211/mesh_hwmp.c
AgeCommit message (Collapse)AuthorFilesLines
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-26mac80211: probe unexercised mesh linksRajkumar Manoharan1-0/+4
The requirement for mesh link metric refreshing, is that from one mesh point we be able to send some data frames to other mesh points which are not currently selected as a primary traffic path, but which are only 1 hop away. The absence of the primary path to the chosen node makes it necessary to apply some form of marking on a chosen packet stream so that the packets can be properly steered to the selected node for testing, and not by the regular mesh path lookup. Tested-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211: mesh: drop redundant rcu_read_lock/unlock callsFelix Fietkau1-19/+7
The callers of these functions are all within RCU locked sections Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08mac80211: Add support for NL80211_STA_INFO_AIRTIME_LINK_METRICNarayanraddi Masti1-2/+2
Add support for mesh airtime link metric attribute NL80211_STA_INFO_AIRTIME_LINK_METRIC. Signed-off-by: Narayanraddi Masti <team.nmasti@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08mac80211: pass bssids to elements parsing functionSara Sharon1-1/+2
In multiple BSSID, we have nested IEs inside the multiple BSSID IE, that override the external ones for that specific BSS. As preparation for supporting that, pass 2 BSSIDs to the parse function, the transmitter, and the selected BSSID, so it can know which IEs to choose. If the selected BSSID is NULL, the outer ones will be applied. Change ieee80211_bss_info_update to parse elements itself, instead of receiving them parsed, so we have the relevant bss entry in hand. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19mac80211: mesh: only switch path when new metric is at least 10% betterJulan Hsu1-3/+8
This helps to reduce frequent path switches when multiple path candidates have the same or very similar path metrics. Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19mac80211: mesh: use average bitrate for link metric calculationJulan Hsu1-3/+6
Use bitrate moving average to smooth out link metric and stablize path selection. Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19nl80211/mac80211: mesh: add mesh path change count to mpath infoJulan Hsu1-0/+4
Expose path change count to destination in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19nl80211/mac80211: mesh: add hop count to mpath infoJulan Hsu1-0/+5
Expose hop count to destination information in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10mac80211: fix TX status reporting for ieee80211sYuan-Chi Pang1-6/+3
TX status reporting to ieee80211s is through ieee80211s_update_metric. There are two problems about ieee80211s_update_metric: 1. The purpose is to estimate the fail probability to a specific link. No need to restrict to data frame. 2. Current implementation does not work if wireless driver does not pass tx_status with skb. Fix this by removing ieee80211_is_data condition, passing ieee80211_tx_status directly to ieee80211s_update_metric, and putting it in both __ieee80211_tx_status and ieee80211_tx_status_ext. Signed-off-by: Yuan-Chi Pang <fu3mo6goo@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-29mac80211: mesh: fix HWMP sequence numbering to follow standardYuan-Chi Pang1-0/+4
IEEE 802.11-2016 14.10.8.3 HWMP sequence numbering says: If it is a target mesh STA, it shall update its own HWMP SN to maximum (current HWMP SN, target HWMP SN in the PREQ element) + 1 immediately before it generates a PREP element in response to a PREQ element. Signed-off-by: Yuan-Chi Pang <fu3mo6goo@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11mac80211: mark expected switch fall-throughsGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in some cases I replaced "fall through on else" and "otherwise fall through" comments with just a "fall through" comment, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-27mac80211: fix the update of path metric for RANN frameChun-Yeow Yeoh1-6/+9
The previous path metric update from RANN frame has not considered the own link metric toward the transmitting mesh STA. Fix this. Reported-by: Michael65535 Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20mac80211: Convert timers to use timer_setup()Kees Cook1-2/+2
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-21mac80211: use offsetofend()Johannes Berg1-4/+4
This was created using the following spatch: @find@ type S; expression M, M2; position p; @@ offsetof(S, M) + sizeof(M2)@p @script:python@ m << find.M; m2 << find.M2; @@ if not m2.endswith('-> ' + m): cocci.include_match(False) @change@ type find.S; expression find.M, find.M2; position find.p; @@ -offsetof(S, M) + sizeof(M2)@p +offsetofend(S, M) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg1-4/+2
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06mac80211: fix mesh fail_avg checkManoharan, Rajkumar1-2/+4
Mesh failure average never be more than 100. Only in case of fixed path, average will be more than threshold limit (95%). With recent EWMA changes it may go upto 99 as it is scaled to 100. It make sense to return maximum metric when average is greater than threshold limit. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06mac80211: use DECLARE_EWMA for mesh_fail_avgManoharan, Rajkumar1-6/+15
As moving average is not considering fractional part, it will get stuck at the same level after certain state. For example, with current values, it can get stuck at 96. Fortunately the current threshold 95%, but if it were increased to 96 or more mesh paths would never be deactivated. Fix failure average movement by using EWMA helpers, which does take into account fractional parts. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> [johannes: pick a larger EWMA factor for more precision with the limited range that we will feed into it, adjust to new API] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
2016-09-12mac80211: make mpath path fixing more robustPedersen, Thomas1-1/+2
A fixed mpath was not quite being treated as such: 1) if a PERR frame was received, a fixed mpath was deactivated. 2) queued path discovery for fixed mpath was potentially being considered, changing mpath state. 3) other mpath flags were potentially being inherited when fixing the mpath. Just assign PATH_FIXED and SN_VALID. This solves several issues when fixing a mesh path in one direction. The reverse direction mpath should probably also be fixed, or root announcements at least be enabled. Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-11mac80211: mesh: Add support for HW RC implementationMaxim Altshul1-8/+19
Mesh HWMP module will be able to rely on the HW RC algorithm if it exists, for path metric calculations. This allows the metric calculation mechanism to calculate a correct metric, based on PER and last TX rate both via HW RC algorithm if it exists or via parameters collected by the SW. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2016-04-06mac80211: fix "warning: ‘target_metric’ may be used uninitialized"Jeff Mahoney1-1/+1
This fixes: net/mac80211/mesh_hwmp.c:603:26: warning: ‘target_metric’ may be used uninitialized in this function target_metric is only consumed when reply = true so no bug exists here, but not all versions of gcc realize it. Initialize to 0 to remove the warning. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: fix crash in mesh_path_timerBob Copeland1-0/+4
The mesh_path_reclaim() function, called from an rcu callback, cancels the mesh_path_timer associated with a mesh path. Unfortunately, this call can happen much later, perhaps after the hash table itself is destroyed. Such a situation led to the following crash in mesh_path_send_to_gates() when dereferencing the tbl pointer: [ 23.901661] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 23.905516] IP: [<ffffffff814c910b>] mesh_path_send_to_gates+0x2b/0x740 [ 23.908757] PGD 99ca067 PUD 99c4067 PMD 0 [ 23.910789] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 23.913485] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-wt+ #43 [ 23.916675] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 23.920471] task: ffffffff81685500 ti: ffffffff81678000 task.ti: ffffffff81678000 [ 23.922619] RIP: 0010:[<ffffffff814c910b>] [<ffffffff814c910b>] mesh_path_send_to_gates+0x2b/0x740 [ 23.925237] RSP: 0018:ffff88000b403d30 EFLAGS: 00010286 [ 23.926739] RAX: 0000000000000000 RBX: ffff880009bc0d20 RCX: 0000000000000102 [ 23.928796] RDX: 000000000000002e RSI: 0000000000000001 RDI: ffff880009bc0d20 [ 23.930895] RBP: ffff88000b403e18 R08: 0000000000000001 R09: 0000000000000001 [ 23.932917] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880009c20940 [ 23.936370] R13: ffff880009bc0e70 R14: ffff880009c21c40 R15: ffff880009bc0d20 [ 23.939823] FS: 0000000000000000(0000) GS:ffff88000b400000(0000) knlGS:0000000000000000 [ 23.943688] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 23.946429] CR2: 0000000000000008 CR3: 00000000099c5000 CR4: 00000000000006b0 [ 23.949861] Stack: [ 23.950840] 000000000000002e ffff880009c20940 ffff88000b403da8 ffffffff8109e551 [ 23.954467] ffffffff82711be2 000000000000002e 0000000000000000 ffffffff8166a5f5 [ 23.958141] 0000000000685ce8 0000000000000246 ffff880009bc0d20 ffff880009c20940 [ 23.961801] Call Trace: [ 23.962987] <IRQ> [ 23.963963] [<ffffffff8109e551>] ? vprintk_emit+0x351/0x5e0 [ 23.966782] [<ffffffff8109e8ff>] ? vprintk_default+0x1f/0x30 [ 23.969529] [<ffffffff810ffa41>] ? printk+0x48/0x50 [ 23.971956] [<ffffffff814ceef3>] mesh_path_timer+0x133/0x160 [ 23.974707] [<ffffffff814cedc0>] ? mesh_nexthop_resolve+0x230/0x230 [ 23.977775] [<ffffffff810b04ee>] call_timer_fn+0xce/0x330 [ 23.980448] [<ffffffff810b0425>] ? call_timer_fn+0x5/0x330 [ 23.983126] [<ffffffff814cedc0>] ? mesh_nexthop_resolve+0x230/0x230 [ 23.986091] [<ffffffff810b097c>] run_timer_softirq+0x22c/0x390 Instead of cancelling in the RCU callback, set a new flag to prevent the timer from being rearmed, and then cancel the timer synchronously when freeing the mesh path. This leaves mesh_path_reclaim() doing nothing but kfree, so switch to kfree_rcu(). Fixes: 3b302ada7f0a ("mac80211: mesh: move path tables into if_mesh") Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-04mac80211: use reset to set header pointerZhang Shengju1-3/+3
Since offset is zero, it's not necessary to use set function. Reset function is straightforward, and will remove the unnecessary add operation in set function. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21mac80211: move station statistics into sub-structsJohannes Berg1-1/+1
Group station statistics by where they're (mostly) updated (TX, RX and TX-status) and group them into sub-structs of the struct sta_info. Also rename the variables since the grouping now makes it obvious where they belong. This makes it easier to identify where the statistics are updated in the code, and thus easier to think about them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: mesh: move fail_avg into mesh structJohannes Berg1-4/+5
This value is only used in mesh, so move it into the new mesh sub-struct of the station info. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: mesh process the target only subfield for mesh hwmpChun-Yeow Yeoh1-24/+8
This patch does the following: - Remove unnecessary flags field used by PERR element - Use the per target flags defined in <linux/ieee80211.h> - Process the target only subfield based on case E2 of IEEE802.11-2012 13.10.9.3 Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: mac80211: Check SN for deactivated mpathsJesse Jones1-0/+26
When processing a PREQ or PREP it's critical to use the incoming SN. If that is improperly done routing loops and other types of badness can happen. But the code was always processing path messages for deactivated paths. This path fixes that so that if we have a valid SN then we use it to verify that it is a message we can accept. For reference the relevant section of the standard is 13.10.8.4 which doesn't address the deactivated path case at all. I also included a special case for when our peer reboots or restarts networking. This is an important case because without it there can be a very long delay before we accept path messages from that peer. It's also a simple case and intimately associated with processing messages for deactivated paths so I used one patch instead of two. Signed-off-by: Alexis Green <agreen@cococorp.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: mesh: don't invalidate SN on discovery failureJesse Jones1-1/+3
The 2012 spec mentions that path SNs can be invalid when created (see section 13.10.8.4 table 13-9) but AFAICT never talks about invalidating SNs. Which makes sense: if we have figured out the path to a target at a certain SN then we want to remember that fact. Failing to do so can lead to routing loops because if we don't have a valid SN then we have no way of knowing whether an incoming path message leads to or away from the target. However currently when discovery fails we zero out mpath->flags which clears MESH_PATH_SN_VALID. This patch fixes that so that only the discovery relevant flags are cleared. Signed-off-by: Alexis Green <agreen@cococorp.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: mesh: add missing case to PERR processingAlexis Green1-2/+5
When the nexthop is unable to resolve its own nexthop it will send back a PERR with a zero target_sn. According to section 13.10.11.4.3 step b in the 2012 standard that perr should be forwarded and the associated mpath->sn should be incremented. Neither one of those was happening which is rather bad because the originator was not told that packets are black holing. Signed-off-by: Alexis Green <agreen@cococorp.com> CC: Jesse Jones <jjones@cococorp.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: move mesh related station fields to own structJohannes Berg1-1/+1
There are now a fairly large number of mesh fields that really aren't needed in any other modes; move those into their own structure and allocate them separately. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-10mac80211: Fix a case of incorrect metric used when forwarding a PREQAlexis Green1-9/+8
This patch fixes a bug in hwmp_preq_frame_process where the wrong metric can be used when forwarding a PREQ. This happens because the code uses the same metric variable to record the value of the metric to the source of the PREQ and the value of the metric to the target of the PREQ. This comes into play when both reply and forward are set which happens when IEEE80211_PREQ_PROACTIVE_PREP_FLAG is set and when MP_F_DO | MP_F_RF is set. The original code had a special case to handle the first case but not the second. The patch uses distinct variables for the two metrics which makes the code flow much clearer and removes the need to restore the original value of metric when forwarding. Signed-off-by: Alexis Green <agreen@cococorp.com> CC: Jesse Jones <jjones@cococorp.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09mac80211: Fix incorrectly named last_hop_metric variable in ↵Alexis Green1-9/+9
mesh_rx_path_sel_frame The last hop metric should refer to link cost (this is how hwmp_route_info_get uses it for example). But in mesh_rx_path_sel_frame we are not dealing with link cost but with the total cost to the origin of a PREQ or PREP. Signed-off-by: Alexis Green <agreen@cococorp.com> CC: Jesse Jones <jjones@cococorp.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-15mac80211: remove unnecessary break after returnFabian Frederick1-1/+0
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22mac80211: mesh: always use the latest target_snBob Copeland1-1/+2
When a path target responds to a path request, its response always contains the most up-to-date information; accordingly, it should use the latest target_sn, regardless of net_traversal_jiffies(). Otherwise, only the first path response is considered when constructing a path, as it will have the highest target_sn of all replies during that period. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-22mac80211: mesh: use u16 return type for u16 getterBob Copeland1-1/+1
u16_field_get() is a simple wrapper around get_unaligned_le16(), and it is being assigned to a u16, so there's no need to promote to u32 in the middle. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: use put_unaligned_le in mesh when necessaryChun-Yeow Yeoh1-50/+37
Use put_unaligned_le16 and put_unaligned_le32 for mesh_path_error_tx and mesh_path_sel_frame_tx. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: add generic cipher scheme supportMax Stepanov1-2/+2
This adds generic cipher scheme support to mac80211, such schemes are fully under control by the driver. On hw registration drivers may specify additional HW ciphers with a scheme how these ciphers have to be handled by mac80211 TX/RR. A cipher scheme specifies a cipher suite value, a size of the security header to be added to or stripped from frames and how the PN is to be verified on RX. Signed-off-by: Max Stepanov <Max.Stepanov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: parse VHT channel switch IEsJohannes Berg1-1/+1
VHT introduces multiple IEs that need to be parsed for a wide bandwidth channel switch. Two are (currently) needed in mac80211: * wide bandwidth channel switch element * channel switch wrapper element The former is contained in the latter for beacons and probe responses, but not for the spectrum management action frames so the IE parser needs a new argument to differentiate them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: return new mpath from mesh_path_add()Bob Copeland1-13/+9
Most times that mesh_path_add() is called, it is followed by a lookup to get the just-added mpath. We can instead just return the new mpath in the case that we allocated one (or the existing one if already there), so do that. Also, reorder the code in mesh_path_add a bit so that we don't need to allocate in the pre-existing case. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: fix the PREP mesh hwmp debug messageChun-Yeow Yeoh1-2/+2
The mesh hwmp debug message is a bit confusing. The "sending PREP to %p" should be the MAC address of mesh STA that has originated the PREQ message and the "received PREP from %pM" should be the MAC address of the mesh STA that has originated the PREP message. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: clean up mesh codeJohannes Berg1-34/+34
There's various code with strange indentation, questionable loop and locking constructs, etc. The bigger change is moving the "sdata" argument to the first argument of all functions, like all other mac80211 functions that have one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: constify IE parsingJohannes Berg1-19/+23
Make all the parsed IE pointers const, and propagate the change to all the users etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04mac80211: mesh power save basicsMarco Porsch1-0/+7
Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-28Merge branch 'master' of ↵John W. Linville1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/iwlwifi/dvm/tx.c
2013-01-16mac80211: add encrypt headroom to PERR framesBob Copeland1-1/+3
Mesh PERR action frames are robust and thus may be encrypted, so add proper head/tailroom to allow this. Fixes this warning when operating a Mesh STA on ath5k: WARNING: at net/mac80211/wpa.c:427 ccmp_encrypt_skb.isra.5+0x7b/0x1a0 [mac80211]() Call Trace: [<c011c5e7>] warn_slowpath_common+0x63/0x78 [<c011c60b>] warn_slowpath_null+0xf/0x13 [<e090621d>] ccmp_encrypt_skb.isra.5+0x7b/0x1a0 [mac80211] [<e090685c>] ieee80211_crypto_ccmp_encrypt+0x1f/0x37 [mac80211] [<e0917113>] invoke_tx_handlers+0xcad/0x10bd [mac80211] [<e0917665>] ieee80211_tx+0x87/0xb3 [mac80211] [<e0918932>] ieee80211_tx_pending+0xcc/0x170 [mac80211] [<c0121c43>] tasklet_action+0x3e/0x65 Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16mac80211: set NEED_TXPROCESSING for PERR framesBob Copeland1-0/+1
A user reported warnings in ath5k due to transmitting frames with no rates set up. The frames were Mesh PERR frames, and some debugging showed an empty control block with just the vif pointer: > [ 562.522682] XXX txinfo: 00000000: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 ................ > [ 562.522688] XXX txinfo: 00000010: 00 00 00 00 00 00 00 00 54 b8 f2 > db 00 00 00 00 ........T....... > [ 562.522693] XXX txinfo: 00000020: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 ................ Set the IEEE80211_TX_INTFL_NEED_TXPROCESSING flag to ensure that rate control gets run before the frame is sent. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-04mac80211: fix mesh_hwmp kerneldocBob Copeland1-1/+4
One of the function names was wrong and some parameters were missing. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: clean up mpath_move_to_queue()Thomas Pedersen1-2/+0
Use skb_queue_walk_safe instead, and fix a few issues: - didn't free old skbs on moving - didn't react to failed skb alloc - needlessly held a local pointer to the destination frame queue - didn't check destination queue length before adding skb Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 09:29:55 +0000