summaryrefslogtreecommitdiffstats
path: root/net/mac80211/key.h
AgeCommit message (Collapse)AuthorFilesLines
2013-05-16wireless: move crypto constants to ieee80211.hJohannes Berg1-13/+2
mac80211 and the Intel drivers all define crypto constants, move them to ieee80211.h instead. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-11mac80211: batch key free synchronize_net()Johannes Berg1-0/+2
Instead of calling synchronize_net() for every key on an interface or when a station is removed, do it only once for all keys in both of these cases. As a side-effect, removing station keys now always calls synchronize_net() even if there are no keys, which fixes an issue with station removal happening in the driver while the station could still be used for TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-11mac80211: remove underscores from some key functionsJohannes Berg1-1/+1
Some key function don't exist without underscores, so remove the underscores from those. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-11mac80211: clean up key freeing a bitJohannes Berg1-6/+5
When a key is allocated but not really added, there's no need to go through the entire teardown process. Also, if adding a key fails, ieee80211_key_link() can take care of freeing it instead of the (only) caller. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: defer tailroom counter manipulation when roamingJohannes Berg1-1/+3
During roaming, the crypto_tx_tailroom_needed_cnt counter will often take values 2,1,0,1,2 because first keys are removed and then new keys are added. This is inefficient because during the 0->1 transition, synchronize_net must be called to avoid packet races, although typically no packets would be flowing during that time. To avoid that, defer the decrement (2->1, 1->0) when keys are removed (by half a second). This means the counter will really have the values 2,2,2,3,4 ... 2, thus never reaching 0 and having to do the 0->1 transition. Note that this patch entirely disregards the drivers for which this optimisation was done to start with, for them the key removal itself will be expensive because it has to synchronize_net() after the counter is incremented to remove the key from HW crypto. For them the sequence will look like this: 0,1,0,1,0,1,0,1,0 (*) which is clearly a lot more inefficient. This could be addressed separately, during key removal the 0->1->0 sequence isn't necessary. (*) it starts at 0 because HW crypto is on, then goes to 1 when HW crypto is disabled for a key, then back to 0 because the key is deleted; this happens for both keys in the example. When new keys are added, it goes to 1 first because they're added in software; when a key is moved to hardware it goes back to 0 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: cleanup generic suspend/resume proceduresStanislaw Gruszka1-1/+0
Since now we disconnect before suspend, various code which save connection state can now be removed from suspend and resume procedure. Cleanup on resume side is smaller as ieee80211_reconfig() is also used for H/W restart. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-05mac80211: add debug file for mic failureSaravana1-0/+3
The mic failure count provides the number of mic failures that have happened on a given key (without a countermeasure being started, since that would remove the key). Signed-off-by: Saravana <saravanad@posedge.com> [fix NULL pointer issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19mac80211: introduce IEEE80211_NUM_TIDS and use itJohannes Berg1-5/+3
Introduce IEEE80211_NUM_TIDS in the generic 802.11 header file and use it in place of STA_TID_NUM and NUM_RX_DATA_QUEUES which are both really the number of TIDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-07-13mac80211: allow driver to disconnect after resumeJohannes Berg1-0/+2
In WoWLAN, devices may use crypto keys for TX/RX and could also implement GTK rekeying. If the driver isn't able to retrieve replay counters and similar information from the device upon resume, or if the device isn't responsive due to platform issues, it isn't safe to keep the connection up as GTK rekey messages from during the sleep time could be replayed against it. The only protection against that is disconnecting from the AP. Modifying mac80211 to do that while it is resuming would be very complex and invasive in the case that the driver requires a reconfig, so do it after it has resumed completely. In that case, however, packets might be replayed since it can then only happen after TX/RX are up again, so mark keys for interfaces that need to disconnect as "tainted" and drop all packets that are sent or received with those keys. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mac80211: allow drivers to access key sequence counterJohannes Berg1-2/+3
In order to implement GTK rekeying, the device needs to be able to encrypt frames with the right PN/IV and check the PN/IV in RX frames. To be able to tell it about all those counters, we need to be able to get them from mac80211, this adds the required API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mac80211: simplify RX PN/IV handlingJohannes Berg1-1/+1
The current rx->queue value is slightly confusing. It is set to 16 on non-QoS frames, including data, and then used for sequence number and PN/IV checks. Until recently, we had a TKIP IV checking bug that had been introduced in 2008 to fix a seqno issue. Before that, we always used TID 0 for checking the PN or IV on non-QoS packets. Go back to the old status for PN/IV checks using the TID 0 counter for non-QoS by splitting up the rx->queue value into "seqno_idx" and "security_idx" in order to avoid confusion in the future. They each have special rules on the value used for non- QoS data frames. Since the handling is now unified, also revert the special TKIP handling from my patch "mac80211: fix TKIP replay vulnerability". Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mac80211: use AES_BLOCK_SIZEJohannes Berg1-3/+0
mac80211 has a defnition of AES_BLOCK_SIZE and multiple definitions of AES_BLOCK_LEN. Remove them all and use crypto/aes.h. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mac80211: fix CMAC racesJohannes Berg1-4/+1
Just like TKIP and CCMP, CMAC has the PN race. It might not actually be possible to hit it now since there aren't multiple ACs for management frames, but fix it anyway. Also move scratch buffers onto the stack. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mac80211: fix CCMP racesJohannes Berg1-4/+1
Since we can process multiple packets at the same time for different ACs, but the PN is allocated from a single counter, we need to use an atomic value there. Use atomic64_t to make this cheaper on 64-bit platforms, other platforms will support this through software emulation, see lib/atomic64.c. We also need to use an on-stack scratch buf so that multiple packets won't corrupt each others scratch buffers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mac80211: fix TKIP races, make API easier to useJohannes Berg1-3/+7
Our current TKIP code races against itself on TX since we can process multiple packets at the same time on different ACs, but they all share the TX context for TKIP. This can lead to bad IVs etc. Also, the crypto offload helper code just obtains the P1K/P2K from the cache, and can update it as well, but there's no guarantee that packets are really processed in order. To fix these issues, first introduce a spinlock that will protect the IV16/IV32 values in the TX context. This first step makes sure that we don't assign the same IV multiple times or get confused in other ways. Secondly, change the way the P1K cache works. I add a field "p1k_iv32" that stores the value of the IV32 when the P1K was last recomputed, and if different from the last time, then a new P1K is recomputed. This can cause the P1K computation to flip back and forth if packets are processed out of order. All this also happens under the new spinlock. Finally, because there are argument differences, split up the ieee80211_get_tkip_key() API into ieee80211_get_tkip_p1k() and ieee80211_get_tkip_p2k() and give them the correct arguments. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16mac80211: sparse RCU annotationsJohannes Berg1-0/+3
This adds sparse RCU annotations to most of mac80211, only the mesh code remains to be done. Due the the previous patches, the annotations are pretty simple. The only thing that this actually changes is removing the RCU usage of key->sta in debugfs since this pointer isn't actually an RCU-managed pointer (it only has a single assignment done before the key even goes live). As that is otherwise harmless, I decided to make it part of this patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12mac80211: make key locking clearerJohannes Berg1-0/+1
The code in ieee80211_del_key() doesn't acquire the key_mtx properly when it dereferences the keys. It turns out that isn't actually necessary since the key_mtx itself seems to be redundant since all key manipulations are done under the RTNL, but as long as we have the key_mtx we should use it the right way too. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-07mac80211: remove unused macrosShan Wei1-1/+0
Compile test only. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13mac80211: support separate default keysJohannes Berg1-1/+2
Add support for split default keys (unicast and multicast) in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06cfg80211/mac80211: allow per-station GTKsJohannes Berg1-0/+3
This adds API to allow adding per-station GTKs, updates mac80211 to support it, and also allows drivers to remove a key from hwaccel again when this may be necessary due to multiple GTKs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-27mac80211: allow vendor specific cipher suitesJohannes Berg1-3/+3
Allow drivers to specify their own set of cipher suites to advertise vendor-specific ciphers. The driver is then required to implement hardware crypto offload for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: use cipher suite selectorsJohannes Berg1-3/+1
Currently, mac80211 translates the cfg80211 cipher suite selectors into ALG_* values. That isn't all too useful, and some drivers benefit from the distinction between WEP40 and WEP104 as well. Therefore, convert it all to use the cipher suite selectors. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27mac80211: Fix key freeing to handle unlinked keysJouni Malinen1-1/+2
Key locking simplification removed key->sdata != NULL verification from ieee80211_key_free(). While that is fine for most use cases, there is one path where this function can be called with an unlinked key (i.e., key->sdata == NULL && key->local == NULL). This results in a NULL pointer dereference with the current implementation. This is known to happen at least with FT protocol when wpa_supplicant tries to configure the key before association. Avoid the issue by passing in the local pointer to ieee80211_key_free(). In addition, do not clear the key from hw_accel or debugfs if it has not yet been added. At least the hw_accel one could trigger another NULL pointer dereference. Signed-off-by: Jouni Malinen <j@w1.fi> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-15mac80211: Use a separate CCMP PN receive counter for management framesJouni Malinen1-1/+7
When management frame protection (IEEE 802.11w) is used, we must use a separate counter for tracking received CCMP packet number for the management frames. The previously used NUM_RX_DATA_QUEUESth queue was shared with data frames when QoS was not used and that can cause problems in detecting replays incorrectly for robust management frames. Add a new counter just for robust management frames to avoid this issue. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03mac80211: simplify key lockingJohannes Berg1-21/+1
Since I recently made station management able to sleep, I can now rework key management as well; since it will no longer need a spinlock and can also use a mutex instead, a bunch of code to allow drivers' set_key to sleep while key management is protected by a spinlock can now be removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-22mac80211 : fix a race with update_tkip_keygregor kowski1-1/+7
The mac80211 tkip code won't call update_tkip_key, if rx packets are received without KEY_FLAG_UPLOADED_TO_HARDWARE. This can happen on first packet because the hardware key stuff is called asynchronously with todo workqueue. This patch workaround that by tracking if we sent the key to the driver. Signed-off-by: Gregor Kowski <gregor.kowski@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30cfg80211/mac80211: use debugfs_remove_recursiveJohannes Berg1-12/+0
We can save a lot of code and pointers in the structs by using debugfs_remove_recursive(). First, change cfg80211 to use debugfs_remove_recursive() so that drivers do not need to clean up any files they added to the per-wiphy debugfs (if and only if they are ok to be accessed until after wiphy_unregister!). Then also make mac80211 use debugfs_remove_recursive() where necessary -- it need not remove per-wiphy files as cfg80211 now removes those, but netdev etc. files still need to be handled but can now be removed without needing struct dentry pointers to all of them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-13nl80211: Add RSC configuration for new keysJouni Malinen1-1/+2
When setting a key with NL80211_CMD_NEW_KEY, we should allow the key sequence number (RSC) to be set in order to allow replay protection to work correctly for group keys. This patch documents this use for nl80211 and adds the couple of missing pieces in nl80211/cfg80211 and mac80211 to support this. In addition, WEXT SIOCSIWENCODEEXT compat processing in cfg80211 is extended to handle the RSC (this was already specified in WEXT, but just not implemented in cfg80211/mac80211). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Use BIP (AES-128-CMAC)Jouni Malinen1-0/+6
Add mechanism for managing BIP keys (IGTK) and integrate BIP into the TX/RX paths. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Add BIP (AES-128-CMAC)Jouni Malinen1-0/+10
Implement Broadcast/Multicast Integrity Protocol for management frame protection. This patch adds the needed definitions for the new information element (MMIE) and implementation for the new "encryption" type (though, BIP is actually not encrypting data, it provides only integrity protection). These routines will be used by a follow-on patch that enables BIP for multicast/broadcast robust management frames. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27mac80211: Let drivers have access to TKIP key offets for TX and RX MICLuis R. Rodriguez1-25/+12
Some drivers may want to to use the TKIP key offsets for TX and RX MIC so lets move this out. Lets also clear up a bit how this is used internally in mac80211. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: add a struct to hold tkip contextHarvey Harrison1-8/+9
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16mac80211: fix key hwaccel raceJohannes Berg1-4/+7
The previous key locking patch left a small race: it would be possible to add a key and take the interface down before the key todo is run so that hwaccel for that key is enabled on an interface that is down. Avoid this by running the todo list when an interface is brought up or down. This patch also fixes a small bug: before this change, a few functions used the key list without the lock that protects it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: fix key debugfs default_key linkJohannes Berg1-0/+1
The default_key symlink points to the key index rather than they key counter, fix it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: rename filesJohannes Berg1-0/+157
This patch renames all mac80211 files (except ieee80211_i.h) to get rid of the useless ieee80211_ prefix. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>