summaryrefslogtreecommitdiffstats
path: root/net/mac80211/ibss.c
AgeCommit message (Collapse)AuthorFilesLines
2014-10-29mac80211: use secondary channel offset IE also beacons during CSALuciano Coelho1-1/+1
If we are switching from an HT40+ to an HT40- channel (or vice-versa), we need the secondary channel offset IE to specify what is the post-CSA offset to be used. This applies both to beacons and to probe responses. In ieee80211_parse_ch_switch_ie() we were ignoring this IE from beacons and using the *current* HT information IE instead. This was causing us to use the same offset as before the switch. Fix that by using the secondary channel offset IE also for beacons and don't ever use the pre-switch offset. Additionally, remove the "beacon" argument from ieee80211_parse_ch_switch_ie(), since it's not needed anymore. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-05mac80211: add Intel Mobile Communications copyrightJohannes Berg1-0/+1
Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-15mac80211: don't duplicate station QoS capability dataJohannes Berg1-1/+1
We currently track the QoS capability twice: for all peer stations in the WLAN_STA_WME flag, and for any clients associated to an AP interface separately for drivers in the sta->sta.wme field. Remove the WLAN_STA_WME flag and track the capability only in the driver-visible field, getting rid of the limitation that the field is only valid in AP mode. Reviewed-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: add QoS IE during TDLS setup startArik Nemtsov1-11/+2
If QoS is supported by the card, add an appropriate IE to TDLS setup- request and setup-response frames. Consolidate the setting of the WMM info IE across mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: move csa counters from sdata to beacon/prespMichal Kazior1-1/+1
Having csa counters part of beacon and probe_resp structures makes it easier to get rid of possible races between setting a beacon and updating counters on SMP systems by guaranteeing counters are always consistent against given beacon struct. While at it relax WARN_ON into WARN_ON_ONCE to prevent spamming logs and racing. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [remove pointless array check] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-27mac80211: fix IBSS join by initializing last_scan_completedKrzysztof Hałasa1-0/+1
Without this fix, freshly rebooted Linux creates a new IBSS instead of joining an existing one. Only when jiffies counter overflows after 5 minutes the IBSS can be successfully joined. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> [edit commit message slightly] Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15mac80211: Support multiple CSA countersAndrei Otcheretianski1-1/+1
Support up to IEEE80211_MAX_CSA_COUNTERS_NUM csa counters. This is defined to be 2 now, to support both CSA and eCSA counters. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: move combination check to mac80211 for ibssLuciano Coelho1-3/+29
Now that mac80211 can check the interface combinations itself, move the combinations check from cfg80211 to mac80211 when joining an IBSS. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: refactor cfg80211_chandef_dfs_required()Luciano Coelho1-16/+16
Some interface types don't require DFS (such as STATION, P2P_CLIENT etc). In order to centralize these decisions, make cfg80211_chandef_dfs_required() take the iftype into consideration. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: Enable GO operation on additional channelsIlan Peer1-3/+6
Allow GO operation on a channel marked with IEEE80211_CHAN_GO_CONCURRENT iff there is an active station interface that is associated to an AP operating on the same channel in the 2 GHz band or the same UNII band (in the 5 GHz band). This relaxation is not allowed if the channel is marked with IEEE80211_CHAN_RADAR. Note that this is a permissive approach to the FCC definitions, that require a clear assessment that the device operating the AP is an authorized master, i.e., with radar detection and DFS capabilities. It is assumed that such restrictions are enforced by user space. Furthermore, it is assumed, that if the conditions that allowed for the operation of the GO on such a channel change, i.e., the station interface disconnected from the AP, it is the responsibility of user space to evacuate the GO from the channel. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: use RCU_INIT_POINTERMonam Agarwal1-1/+1
rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. However, in the case that NULL is assigned there's no structure to initialize so using RCU_INIT_POINTER instead is safe and more efficient. Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com> [squash eight tiny patches, rewrite commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-19cfg80211/mac80211: ignore signal if the frame was heard on wrong channelEmmanuel Grumbach1-10/+2
On 2.4Ghz band, the channels overlap since the delta between different channels is 5Mhz while the width of the receiver is 20Mhz (at least). This means that we can hear beacons or probe responses from adjacent channels. These frames will have a significant lower RSSI which will feed all kinds of logic with inaccurate data. An obvious example is the roaming algorithm that will think our AP is getting weak and will try to move to another AP. In order to avoid this, update the signal only if the frame has been heard on the same channel as the one advertised by the AP in its DS / HT IEs. We refrain from updating the values only if the AP is already in the BSS list so that we will still have a valid (but inaccurate) value if the AP was heard on an adjacent channel only. To achieve this, stop taking the channel from DS / HT IEs in mac80211. The DS / HT IEs is taken into account to discard the frame if it was received on a disabled channel. This can happen due to the same phenomenon: the frame is sent on channel 12, but heard on channel 11 while channel 12 can be disabled on certain devices. Since this check is done in cfg80211, stop even checking this in mac80211. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [remove unused rx_freq variable] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21mac80211: ibss: handle cfg80211_chandef_dfs_required() error codesLuciano Coelho1-0/+5
Error codes returned by cfg80211_chandef_dfs_required() are ignored when trying to join an IBSS. Fix this by printing an error and returning. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-13Merge branch 'master' of ↵John W. Linville1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-02-06mac80211: Fix IBSS disconnectSujith Manoharan1-4/+1
Currently, when a station leaves an IBSS network, the corresponding BSS is not dropped from cfg80211 if there are other active stations in the network. But, the small window that is present when trying to determine a station's status based on IEEE80211_IBSS_MERGE_INTERVAL introduces a race. Instead of trying to keep the BSS, always remove it when leaving an IBSS network. There is not much benefit to retain the BSS entry since it will be added with a subsequent join operation. This fixes an issue where a dangling BSS entry causes ath9k to wait for a beacon indefinitely. Cc: <stable@vger.kernel.org> Reported-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04cfg80211: fix channel configuration in IBSS joinAntonio Quartulli1-1/+1
When receiving an IBSS_JOINED event select the BSS object based on the {bssid, channel} couple rather than the bssid only. With the current approach if another cell having the same BSSID (but using a different channel) exists then cfg80211 picks up the wrong BSS object. The result is a mismatching channel configuration between cfg80211 and the driver, that can lead to any sort of problem. The issue can be triggered by having an IBSS sitting on given channel and then asking the driver to create a new cell using the same BSSID but with a different frequency. By passing the channel to cfg80211_get_bss() we can solve this ambiguity and retrieve/create the correct BSS object. All the users of cfg80211_ibss_joined() have been changed accordingly. Moreover WARN when cfg80211_ibss_joined() gets a NULL channel as argument and remove a bogus call of the same function in ath6kl (it does not make sense to call cfg80211_ibss_joined() with a zero BSSID on ibss-leave). Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Bing Zhao <bzhao@marvell.com> Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi> Cc: libertas-dev@lists.infradead.org Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> [minor code cleanup in ath6kl] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: remove set but unused variablesJohannes Berg1-3/+0
Compiling with W=1 found a few variables that are set but not used (-Wunused-but-set-variable), remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: send ibss probe responses with noack flagSimon Wunderlich1-0/+5
Responding to probe requests for scanning clients will often create excessive retries, as it happens quite often that the scanning client already left the channel. Therefore do it like hostapd and send probe responses for wildcard SSID only once by using the noack flag. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> [fix typo & 'wildcard SSID' in commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: ibss: remove unnecessary call to release channelLuciano Coelho1-1/+0
The ieee80211_vif_use_channel() function calls ieee80211_vif_release_channel(), so there's no need to call it explicitly in __ieee80211_sta_join_ibss(). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: add missing CSA lockingMichal Kazior1-0/+2
The patch adds a missing sdata lock and adds a few lockdeps for easier maintenance. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: fix sdata->radar_required lockingMichal Kazior1-1/+1
radar_required setting wasn't protected by local->mtx in some places. This should prevent from scanning/radar detection/roc colliding. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: batch CSA bss info notificationMichal Kazior1-4/+3
Instead of having ieee80211_bss_info_change_notify() scattered all over the place just call it once when finalizing CSA. As a side effect this patch adds missing error checking for IBSS CSA beacon update. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> [fix err vs. changed variable usage in ieee80211_csa_finalize()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: only set CSA beacon when at least one beacon must be transmittedLuciano Coelho1-6/+0
A beacon should never have a Channel Switch Announcement information element with a count of 0, because a count of 1 means switch just before the next beacon. So, if a count of 0 was valid in a beacon, it would have been transmitted in the next channel already, which is useless. A CSA count equal to zero is only meaningful in action frames or probe_responses. Fix the ieee80211_csa_is_complete() and ieee80211_update_csa() functions accordingly. With a CSA count of 0, we won't transmit any CSA beacons, because the switch will happen before the next TBTT. To avoid extra work and potential confusion in the drivers, complete the CSA immediately, instead of waiting for the driver to call ieee80211_csa_finish(). To keep things simpler, we also switch immediately when the CSA count is 1, while in theory we should delay the switch until just before the next TBTT. Additionally, move the ieee80211_csa_finish() function to cfg.c, where it makes more sense. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-19mac80211: fix iflist_mtx/mtx locking in radar detectionJohannes Berg1-0/+7
The scan code creates an iflist_mtx -> mtx locking dependency, and a few other places, notably radar detection, were creating the opposite dependency, causing lockdep to complain. As scan and radar detection are mutually exclusive, the deadlock can't really happen in practice, but it's still bad form. A similar issue exists in the monitor mode code, but this is only used by channel-context drivers right now and those have to have hardware scan, so that also can't happen. Still, fix these issues by making some of the channel context code require the mtx to be held rather than acquiring it, thus allowing the monitor/radar callers to keep the iflist_mtx->mtx lock ordering. While at it, also fix access to the local->scanning variable in the radar code, and document that radar_detect_enabled is now properly protected by the mtx. All this would now introduce an ABBA deadlock between the DFS work cancelling and local->mtx, so change the locking there a bit to not need to use cancel_delayed_work_sync() but be able to just use cancel_delayed_work(). The work is also safely stopped/removed when the interface is stopped, so no extra changes are needed. Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16mac80211: align ieee80211_ibss_csa_beacon() with ieee80211_assign_beacon()Luciano Coelho1-1/+4
The return value of ieee80211_ibss_csa_beacon is not aligned with the return value of ieee80211_assign_beacon(). For consistency and to be able to use both functions with similar code, change ieee80211_ibss_csa_beacon() not to send the bss changed notification itself, but return what has changed so the caller can send the notification instead. Tested by: Simon Wunderlich <sw@simonwunderlich.de> Acked by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16mac80211: refactor ieee80211_ibss_process_chanswitch()Luciano Coelho1-48/+13
Refactor ieee80211_ibss_process_chanswitch() to use ieee80211_channel_switch() and avoid code duplication. Tested by: Simon Wunderlich <sw@simonwunderlich.de> Acked by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16mac80211: lock sdata in ieee80211_csa_connection_drop_work()Luciano Coelho1-0/+4
We call ieee80211_ibss_disconnect(), which requires sdata to be locked, so lock the sdata during ieee80211_csa_connection_drop_work(). Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg1-0/+4
2013-12-06Merge branch 'master' of ↵John W. Linville1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/Kconfig net/mac80211/util.c
2013-12-05mac80211: fix nested sdata lock for IBSS/CSASimon Wunderlich1-2/+2
This fixes a regression introduced by my patch "mac80211: don't cancel csa finalize work within stop_ap", which added sdata locks to ieee80211_csa_finalize_work() without removing the locking for ieee80211_ibss_finish_csa(), which is called by the former, resulting in a deadlock due to nested locking. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02mac80211: check csa wiphy flag in ibss before switchingSimon Wunderlich1-0/+4
When external CSA IEs are received (beacons or action messages), a channel switch is triggered as well. This should only be allowed on devices which actually support channel switches, otherwise disconnect. (For the corresponding userspace invocation, the wiphy flag is checked in nl80211). Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: move csa_chandef to sdataLuciano Coelho1-3/+3
There is no reason why we should have only one channel switch announcement at a time for a single phy. When support for channel switch with multiple contexts and multiple vifs per context is implemented, we will need the chandef data for each vif. Move the csa_chandef structure to sdata to prepare for this. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> [Fixed compilation with mesh] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28{nl,cfg,mac}80211: enable the triggering of CSA frame in meshChun-Yeow Yeoh1-54/+0
Allow the triggering of CSA frame using mesh interface. The rules are more or less same with IBSS, such as not allowed to change between the band and channel width has to be same from the previous mode. Also, move the ieee80211_send_action_csa to a common space so that it can be re-used by mesh interface. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: refactor the parsing of chan switch ieChun-Yeow Yeoh1-6/+7
Refactor the channel switch IE parsing to reduce the number of function parameters. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: enable DFS for IBSS modeSimon Wunderlich1-5/+44
Allow changing to DFS channels if the channel is available for beaconing and userspace controls DFS operation. Channel switch announcement from other stations on DFS channels will be interpreted as radar event. These channels will then be marked as unvailable. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-01mac80211: add explicit IBSS driver operationsJohannes Berg1-2/+20
This can be useful for drivers if they have any failure cases when joining an IBSS. Also move setting the queue parameters to before this new call, in case the new driver op needs them already. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: send a CSA action frame when changing channelSimon Wunderlich1-0/+60
IBSS members may not immediately be able to send out their beacon when performing CSA, therefore also send a CSA action frame. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: add support for CSA in IBSS modeSimon Wunderlich1-6/+348
This function adds the channel switch announcement implementation for the IBSS code. It is triggered by userspace (mac80211/cfg) or by external channel switch announcement, which have to be adopted. Both CSAs in beacons and action frames are supported. As for AP mode, the channel switch is applied after some time. However in IBSS mode, the channel switch IEs are generated in the kernel. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: split off ibss disconnectSimon Wunderlich1-80/+92
IBSS CSA will require to disconnect if a channel switch fails, but mac80211 should search and re-connect after this disconnect. To allow such usage, split off the ibss disconnect process in a separate function which only performs the disconnect without overwriting nl80211-supplied parameters. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-28Merge branch 'master' of ↵John W. Linville1-4/+30
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c net/mac80211/ibss.c
2013-08-21mac80211: ibss: fix ignored channel parameterSimon Wunderlich1-4/+29
my earlier patch "mac80211: change IBSS channel state to chandef" created a regression by ignoring the channel parameter in __ieee80211_sta_join_ibss, which breaks IBSS channel selection. This patch fixes this situation by using the right channel and adopting the selected bandwidth mode. Cc: stable@vger.kernel.org Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-21mac80211: add missing channel context releaseJohannes Berg1-0/+1
IBSS needs to release the channel context when leaving but I evidently missed that. Fix it. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16mac80211: move ibss presp generation in own functionSimon Wunderlich1-76/+109
Channel Switch will later require to generate beacons without setting them immediately. Therefore split the presp generation in an own function. Splitting the original very long function might be a good idea anyway. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12mac80211: ibss - do not scan if not needed when creating an IBSSAntonio Quartulli1-0/+11
In some cases mac80211 will scan before creating an IBSS even if bssid and frequency have been forced by the user. This is not needed and leads only to a delay in the IBSS establishment phase. Immediately create the cell if both bssid and frequency (and fixed_freq is set) have been specified. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01mac80211: ibss - remove not authorized station earlierAntonio Quartulli1-1/+29
A station which is not authorized has to be purged earlier to give it a chance to re-try to establish an IBSS/RSN session soon. Set the timeout to 10 seconds. Some refactoring has also been done to allow the IBSS submodule to have its own expiring function. Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: fix off-by-one regression in ibss beacon generationSimon Wunderlich1-1/+3
There is an off-by-one error in the beacon generation for the ibss mode, falsely a rate the extended supported rates which was already added to supported rates, messing up the beacon. This was introduced by commit "mac80211: select and adjust bitrates according to channel mode". Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: fix regression when initializing ibss wmm paramsSimon Wunderlich1-2/+10
There appear to be two regressions in ibss.c when calling ieee80211_sta_def_wmm_params(): * the second argument should be a rate length, not a rate array. This was introduced by my commit "mac80211: select and adjust bitrates according to channel mode" * the third argument is not initialized (anymore), making further checks within this function useless. Since ieee80211_sta_def_wmm_params() is only used by ibss anyway, remove the function entirely and handle the operating mode decision immediately. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: return if IBSS chandef can not be usedSimon Wunderlich1-0/+8
This was originally designed to fail when a 40+/40- mode can not be used, but basic modes (such as 5/10/20 MHz) must be handled with an error. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: allow scanning for 5/10 MHz channels in IBSSSimon Wunderlich1-4/+12
Use a chandef instead of just the channel for scanning, and enable 5/10 Mhz scanning for IBSS mode. Also reporting is changed to the new inform_bss functions. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16cfg80211/mac80211: get mandatory rates based on scan widthSimon Wunderlich1-4/+15
Mandatory rates for 5 and 10 MHz are different from the rates used for 20 MHz in 2.4 GHz mode, as they use OFDM only. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>