summaryrefslogtreecommitdiffstats
path: root/net/mac80211/chan.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+0
2017-01-11mac80211: calculate min channel width correctlyJohannes Berg1-3/+0
In the current minimum chandef code there's an issue in that the recalculation can happen after rate control is initialized for a station that has a wider bandwidth than the current chanctx, and then rate control can immediately start using those higher rates which could cause problems. Observe that first of all that this problem is because we don't take non-associated and non-uploaded stations into account. The restriction to non-associated is quite pointless and is one of the causes for the problem described above, since the rate init will happen before the station is set to associated; no frames could actually be sent until associated, but the rate table can already contain higher rates and that might cause problems. Also, rejecting non-uploaded stations is wrong, since the rate control can select higher rates for those as well. Secondly, it's then necessary to recalculate the minimal config before initializing rate control, so that when rate control is initialized, the higher rates are already available. This can be done easily by adding the necessary function call in rate init. Change-Id: Ib9bc02d34797078db55459d196993f39dcd43070 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-13mac80211: Remove unused 'i' variableKirtika Ruchandani1-3/+1
Commit 5bcae31d9 (mac80211: implement multi-vif in-place reservations) introduced ieee80211_vif_use_reserved_switch() with a counter variable 'i' that is set but not used. Compiling with W=1 gives the following warning, fix it. net/mac80211/chan.c: In function ‘ieee80211_vif_use_reserved_switch’: net/mac80211/chan.c:1273:6: warning: variable ‘i’ set but not used [-Wunused-but-set-variable] This is a harmless warning, and is only being fixed to reduce the noise obtained with W=1 in the kernel. Fixes: 5bcae31d9 ("mac80211: implement multi-vif in-place reservations") Cc: Michal Kazior <michal.kazior@tieto.com> Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kirtika Ruchandani <kirtika@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30mac80211: add boilerplate code for start / stop NANAyala Beker1-0/+3
This code doesn't do much besides allowing to start and stop the vif. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30cfg80211: add start / stop NAN commandsAyala Beker1-0/+3
This allows user space to start/stop NAN interface. A NAN interface is like P2P device in a few aspects: it doesn't have a netdev associated to it. Add the new interface type and prevent operations that can't be executed on NAN interface like scan. Define several attributes that may be configured by user space when starting NAN functionality (master preference and dual band operation) Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: recalc min_def chanctx even when chandef is identicalArik Nemtsov1-1/+3
The min_def chanctx is affected not only by the current chandef, but sometimes also by other stations on the vif. There's a valid scenario where a TDLS peer can widen its BW, thereby causing the min_def to increase. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: Recalc min chandef when station is associatedIlan Peer1-1/+1
The minimum chandef bandwidth calculation was done only in case a new station was inserted (or when an existing station was removed). However, it is possible that stations are inserted before they are associated, e.g., when FULL_AP_CLIENT_STATE is supported and user space adds stations unassociated. Fix this by calling ieee80211_recalc_min_chandef() whenever a station transitions in/out the associated state, and only consider station marked as associated. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: upgrade BW of TDLS peers when possibleArik Nemtsov1-4/+27
Define a station chandef, to be used for wider-bw TDLS peers. When both peers support the feature, upgrade the channel bandwidth to the maximum allowed by both peers and regulatory. Currently widths up to 80MHz are supported in the 5GHz band. When a TDLS peer connects/disconnects recalculate the channel type of the current chanctx. Make the chanctx width calculation consider wider-bw TDLS peers and similarly fix the max_required_bw calculation for the chanctx min_def. Since the sta->bandwidth is calculated only later on, take bss_conf.chandef.width as the minimal width for station interface. Set the upgraded channel width in the VHT-operation set during TDLS setup. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-07mac80211: adjust reserved chan_ctx when assigned to vifAndrei Otcheretianski1-0/+4
When a vif starts using a reserved channel context (during CSA, for example) the required chandef was recalculated, however it was never applied. This could result in using chanctx with narrower width than actually required. Fix this by calling ieee80211_change_chanctx with the recalculated chandef. This both changes the chanctx's width and recalcs min_def. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22mac80211: add TX fastpathJohannes Berg1-0/+6
In order to speed up mac80211's TX path, add the "fast-xmit" cache that will cache the data frame 802.11 header and other data to be able to build the frame more quickly. This cache is rebuilt when external triggers imply changes, but a lot of the checks done per packet today are simplified away to the check for the cache. There's also a more detailed description in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-24mac80211: clear sdata->radar_requiredEliad Peller1-0/+5
If ieee80211_vif_use_channel() fails, we have to clear sdata->radar_required (which we might have just set). Failing to do it results in stale radar_required field which prevents starting new scan requests. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Eliad Peller <eliad@wizery.com> [use false instead of 0] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-23mac80211: enable TPC through mac80211 stackLorenzo Bianconi1-2/+2
Control per packet Transmit Power Control (TPC) in lower drivers according to TX power settings configured by the user. In particular TPC is enabled if value passed in enum nl80211_tx_power_setting is NL80211_TX_POWER_LIMITED (allow using less than specified from userspace), whereas TPC is disabled if nl80211_tx_power_setting is set to NL80211_TX_POWER_FIXED (use value configured from userspace) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14mac80211: consider only relevant vifs for radar_required calculationEliad Peller1-2/+30
ctx->conf.radar_enabled should reflect whether radar detection is enabled for the channel context. When calculating it, make it consider only the vifs that have this context assigned (instead of all the vifs). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14mac80211: remove local->radar_detect_enabledEliad Peller1-3/+2
local->radar_detect_enabled should tell whether radar_detect is enabled on any interface belonging to local. However, it's not getting updated correctly in many cases (actually, when testing with hwsim it's never been set, even when the dfs master is beaconing). Instead of handling all the corner cases (e.g. channel switch), simply check whether radar detection is enabled only when needed, instead of caching the result. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12mac80211: update the channel context after channel switchEmmanuel Grumbach1-0/+4
When the channel switch has been made, a vif is now using the channel context which was reserved. When that happens, we need to update the channel context since its parameters may change. I hit a case in which I switched to a 40Mhz channel but the reserved channel context was still on 20Mhz. The rate control would try to send 40Mhz packets on a 20Mhz channel context and that made iwlwifi's firmware unhappy. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-27mac80211: copy chandef from AP vif to VLANsFelix Fietkau1-4/+19
Instead of keeping track of all those special cases where VLAN interfaces have no bss_conf.chandef, just make sure they have the same as the AP interface they belong to. Among others, this fixes a crash getting a VLAN's channel from userspace since a NULL channel is returned as a good result (return value 0) for VLANs since the commit below. Cc: stable@vger.kernel.org [3.18 only] Fixes: c12bc4885f4b3 ("mac80211: return the vif's chandef in ieee80211_cfg_get_channel()") Signed-off-by: Felix Fietkau <nbd@openwrt.org> [rewrite commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04mac80211: 802.11p OCB mode supportRostislav Lisovy1-0/+1
This patch adds 802.11p OCB (Outside the Context of a BSS) mode support. When communicating in OCB mode a mandatory wildcard BSSID (48 '1' bits) is used. The EDCA parameters handling function was changed to support 802.11p specific values. The insertion of a newly discovered STAs is done in the similar way as in the IBSS mode -- through the deferred insertion. The OCB mode uses a periodic 'housekeeping task' for expiration of disconnected STAs (in the similar manner as in the MESH mode). New Kconfig option for verbose OCB debugging outputs is added. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04cfg80211: 802.11p OCB mode handlingRostislav Lisovy1-0/+2
This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-31mac80211: fix spelling errorsStephen Hemminger1-1/+1
Use codespell to find spelling errors. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-08Merge branch 'master' of ↵John W. Linville1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-09-04Merge tag 'mac80211-next-for-john-2014-08-29' of ↵John W. Linville1-96/+95
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "Not that much content this time. Some RCU cleanups, crypto performance improvements, and various patches all over, rather than listing them one might as well look into the git log instead." Signed-off-by: John W. Linville <linville@tuxdriver.com> Conflicts: drivers/net/wireless/ath/wil6210/wmi.c
2014-09-04Merge tag 'mac80211-for-john-2014-08-29' of ↵John W. Linville1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "Here are a few fixes for mac80211. One has been discussed for a while and adds a terminating NUL-byte to the alpha2 sent to userspace, which shouldn't be necessary but since many places treat it as a string we couldn't move to just sending two bytes. In addition to that, we have two VLAN fixes from Felix, a mesh fix, a fix for the recently introduced RX aggregation offload, a revert for a broken patch (that luckily didn't really cause any harm) and a small fix for alignment in debugfs." Signed-off-by: John W. Linville <linville@redhat.com>
2014-08-29mac80211: fix chantype recalc warningMichal Kazior1-2/+2
When a device driver is unloaded local->interfaces list is cleared. If there was more than 1 interface running and connected (bound to a chanctx) then chantype recalc was called and it ended up with compat being NULL causing a call trace warning. Warn if compat becomes NULL as a result of incompatible bss_conf.chandef of interfaces bound to a given channel context only. The call trace looked like this: WARNING: CPU: 2 PID: 2594 at /devel/src/linux/net/mac80211/chan.c:557 ieee80211_recalc_chanctx_chantype+0x2cd/0x2e0() Modules linked in: ath10k_pci(-) ath10k_core ath CPU: 2 PID: 2594 Comm: rmmod Tainted: G W 3.16.0-rc1+ #150 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000009 ffff88001ea279c0 ffffffff818dfa93 0000000000000000 ffff88001ea279f8 ffffffff810514a8 ffff88001ce09cd0 ffff88001e03cc58 0000000000000000 ffff88001ce08840 ffff88001ce09cd0 ffff88001ea27a08 Call Trace: [<ffffffff818dfa93>] dump_stack+0x4d/0x66 [<ffffffff810514a8>] warn_slowpath_common+0x78/0xa0 [<ffffffff81051585>] warn_slowpath_null+0x15/0x20 [<ffffffff818a407d>] ieee80211_recalc_chanctx_chantype+0x2cd/0x2e0 [<ffffffff818a3dda>] ? ieee80211_recalc_chanctx_chantype+0x2a/0x2e0 [<ffffffff818a4919>] ieee80211_assign_vif_chanctx+0x1a9/0x770 [<ffffffff818a6220>] __ieee80211_vif_release_channel+0x70/0x130 [<ffffffff818a6dd3>] ieee80211_vif_release_channel+0x43/0xb0 [<ffffffff81885f4e>] ieee80211_stop_ap+0x21e/0x5a0 [<ffffffff8184b9b5>] __cfg80211_stop_ap+0x85/0x520 [<ffffffff8181c188>] __cfg80211_leave+0x68/0x120 [<ffffffff8181c268>] cfg80211_leave+0x28/0x40 [<ffffffff8181c5f3>] cfg80211_netdev_notifier_call+0x373/0x6b0 [<ffffffff8107f965>] notifier_call_chain+0x55/0x110 [<ffffffff8107fa41>] raw_notifier_call_chain+0x11/0x20 [<ffffffff816a8dc0>] call_netdevice_notifiers_info+0x30/0x60 [<ffffffff816a8eb9>] __dev_close_many+0x59/0xf0 [<ffffffff816a9021>] dev_close_many+0x81/0x120 [<ffffffff816aa1c5>] rollback_registered_many+0x115/0x2a0 [<ffffffff816aa3a6>] unregister_netdevice_many+0x16/0xa0 [<ffffffff8187d841>] ieee80211_remove_interfaces+0x121/0x1b0 [<ffffffff8185e0e6>] ieee80211_unregister_hw+0x56/0x110 [<ffffffffa0011ac4>] ath10k_mac_unregister+0x14/0x60 [ath10k_core] [<ffffffffa0014fe7>] ath10k_core_unregister+0x27/0x40 [ath10k_core] [<ffffffffa003b1f4>] ath10k_pci_remove+0x44/0xa0 [ath10k_pci] [<ffffffff81373138>] pci_device_remove+0x28/0x60 [<ffffffff814cb534>] __device_release_driver+0x64/0xd0 [<ffffffff814cbcc8>] driver_detach+0xb8/0xc0 [<ffffffff814cb23a>] bus_remove_driver+0x4a/0xb0 [<ffffffff814cc697>] driver_unregister+0x27/0x50 Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26mac80211: make ieee80211_vif_use_reserved_switch staticJohannes Berg1-94/+93
Reorder some code to make ieee80211_vif_use_reserved_switch() static, no other changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26mac80211: ignore AP_VLAN in ieee80211_recalc_chanctx_chantypeFelix Fietkau1-0/+2
When bringing down the AP, a WARN_ON is hit because the bss config chandef is empty here. Since AP_VLAN channel settings do not matter for anything chanctx related (always inherits the settings from the AP interface), let's just ignore it here. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-22mac80211: fix channel switch for chanctx-based driversMichal Kazior1-1/+1
The new_ctx pointer is set only for non-chanctx drivers. This yielded a crash for chanctx-based drivers during channel switch finalization: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: ieee80211_vif_use_reserved_switch+0x71c/0xb00 [mac80211] Use an adequate chanctx pointer to fix this. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-18mac80211: suppress unused variable warning without lockdepJohannes Berg1-1/+1
When lockdep isn't compiled, a local variable isn't used (it's only in a macro argument), annotate it to suppress the compiler warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: use chanctx reservation for STA CSAMichal Kazior1-65/+4
Channel switch finalization is now 2-step. First step is when driver calls chswitch_done(), the other is when reservation is actually finalized (which be defered for in-place reservation). It is now safe to call ieee80211_chswitch_done() more than once. Also remove the ieee80211_vif_change_channel() because it is no longer used. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: use chanctx reservation for AP CSAMichal Kazior1-2/+33
Channel switch finalization is now 2-step. First step is when driver calls csa_finish(), the other is when reservation is actually finalized (which can be deferred for in-place reservation). It is now safe to call ieee80211_csa_finish() more than once. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: implement multi-vif in-place reservationsMichal Kazior1-82/+683
Multi-vif in-place reservations happen when it is impossible to allocate more channel contexts as indicated by interface combinations. Such reservations are not finalized until all assigned interfaces are ready. This still doesn't handle all possible cases (i.e. degradation of number of channels) properly. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville1-2/+2
2014-05-05mac80211: mark local variable __maybe_unusedJohannes Berg1-2/+2
The 'local' variable in __ieee80211_vif_copy_chanctx_to_vlans() is only used/needed when lockdep is compiled in, mark it as such to avoid compile warnings in the other case. While at it, fix some indentation where it's used. Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-30Merge branch 'for-john' of ↵John W. Linville1-114/+500
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/mac80211/chan.c
2014-04-25mac80211: compute chanctx refcount on-the-flyMichal Kazior1-14/+45
It doesn't make much sense to store refcount in the chanctx structure. One still needs to hold chanctx_mtx to get the value safely. Besides, refcount isn't on performance critical paths. This will make implementing chanctx reservation refcounting a little easier. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: split ieee80211_free_chanctx()Michal Kazior1-12/+16
The function did a little too much. Split it up so the code can be easily reused in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: split ieee80211_new_chanctx()Michal Kazior1-13/+43
The function did a little too much. Split it up so the code can be easily reused in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: improve chanctx reservation lookupMichal Kazior1-2/+88
Use a separate function to look for reservation chanctx. For multi-interface/channel reservation search sematics differ slightly. The new routine allows reservations to be merged with chanctx that are already reserved by other interface(s). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: improve find_chanctx() for reservationsMichal Kazior1-27/+29
This allows new vifs to be assigned to a chanctx as long as chanctx's reservation chandefs (if any) and chanctx's current chandef (implied by assigned vifs at the time, if any) and the new vif chandef are all compatible. This implies it is impossible to assign a new vif to an in-place reservation chanctx. This gives no advantages for single-channel hardware. It makes sense for multi-channel hardware only. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: track reserved vifs in chanctxMichal Kazior1-4/+10
This can be useful. Provides a more straghtforward way to iterate over interfaces taking part in chanctx reservation and allows tracking chanctx usage explicitly. The structure is protected by local->chanctx_mtx. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: track assigned vifs in chanctxMichal Kazior1-0/+4
This can be useful. Provides a more straghtforward way to iterate over interfaces bound to a given chanctx and allows tracking chanctx usage explicitly. The structure is protected by local->chanctx_mtx. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: add support for radar detection for reservationsMichal Kazior1-1/+4
Initial chanctx reservation code wasn't aware of radar detection requirements. This is necessary for chanctx reservations to be used for channel switching in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: prevent chanctx overcommitMichal Kazior1-1/+23
Do not allocate more channel contexts than a driver is capable for currently matching interface combination. This allows the ieee80211_vif_reserve_chanctx() to act as a guard against breaking interface combinations. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: allow reservation of a running chanctxLuciano Coelho1-18/+61
With single-channel drivers, we need to be able to change a running chanctx if we want to use chanctx reservation. Not all drivers may be able to do this, so add a flag that indicates support for it. Changing a running chanctx can also be used as an optimization in multi-channel drivers when the context needs to be reserved for future usage. Introduce IEEE80211_CHANCTX_RESERVED chanctx mode to mark a channel as reserved so nobody else can use it (since we know it's going to change). In the future, we may allow several vifs to use the same reservation as long as they plan to use the chanctx on the same future channel. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: implement chanctx reservationLuciano Coelho1-34/+163
In order to support channel switch with multiple vifs and multiple contexts, we implement a concept of channel context reservation. This allows us to reserve a channel context to be used later. The reservation functionality is not tied directly to channel switch and may be used in other situations (eg. reserving a channel context during IBSS join). We first check if an existing compatible context exists and if it does, we reserve it. If there is no compatible context we create a new one and reserve it. Additionally, split ieee80211_vif_copy_chanctx_to_vlans() so we can call it while already holding the chanctx mutex. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: refactor ieee80211_assign/unassign_vif_chanctx into oneLuciano Coelho1-42/+43
Combine the functions into one, so that we can switch from one context to the other without having to unassign and assign separately. This is needed by the channel reservation functionality because otherwise we have a small period of time when the chanctx is set to NULL, which can cause problems if someone else is trying to dereference it. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: split ieee80211_vif_change_channel in twoLuciano Coelho1-25/+33
ieee80211_vif_change_channel() locks chanctx_mtx. When implementing channel reservation for CS, we will need to call the function to change channel when the lock is already held, so split the part that requires the lock out and leave the locking in the original function. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: protect AP VLAN list with local->mtxMichal Kazior1-1/+1
It was impossible to change chanctx of master AP for AP VLANs because the copy function requires RTNL which can't be simply taken in mac80211 code due to possible deadlocks. This is required for future chanctx reservation that re-bind vifs to new chanctx. This requires safe AP VLAN iteration without RTNL. Now VLANs can be iterated while holding either RTNL or local->mtx because the list is modified while holding both of these locks. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: move interface counting for combination check to mac80211Luciano Coelho1-0/+17
Move the counting part of the interface combination check from cfg80211 to mac80211. This is needed to simplify locking when the driver has to perform a combination check by itself (eg. with channel-switch). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 13:45:05 +0000