summaryrefslogtreecommitdiffstats
path: root/net/mac80211/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2013-10-28mac80211: process the CSA frame for mesh accordinglyChun-Yeow Yeoh1-0/+11
Process the CSA frame according to the procedures define in IEEE Std 802.11-2012 section 10.9.8.4.3 as follow: * The mesh channel switch parameters element (MCSP) must be availabe. * If the MCSP's TTL is 1, drop the frame but still process the CSA. * If the MCSP's precedence value is less than or equal to the current precedence value, drop the frame and do not process the CSA. * The CSA frame is forwarded after TTL is decremented by 1 and the initiator field is set to 0. Transmit restrict field and others are maintained as is. * No beacon or probe response frame are handled here. Also, introduce the debug message used for mesh CSA purpose. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-11mac80211: port CCMP to cryptoapi's CCM driverArd Biesheuvel1-0/+1
Use the generic CCM aead chaining mode driver rather than a local implementation that sits right on top of the core AES cipher. This allows the use of accelerated implementations of either CCM as a whole or the CTR mode which it encapsulates. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-04mac80211: mesh power save basicsMarco Porsch1-0/+11
Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-11net/mac80211: remove depends on CONFIG_EXPERIMENTALKees Cook1-1/+1
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: "John W. Linville" <linville@tuxdriver.com> CC: Johannes Berg <johannes@sipsolutions.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: David S. Miller <davem@davemloft.net>
2012-10-18mac80211: fix copy-paste typo in KconfigMarco Porsch1-1/+1
Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-24mac80211: trace debug messagesJohannes Berg1-0/+13
It can be very useful to have all debug messages available when debugging, but hard to correlate between different sources, so add a trace event for all mac80211 debug messages. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-24mac80211: clean up debuggingJohannes Berg1-6/+26
There are a few things that make the logging and debugging in mac80211 less useful than it should be right now: * a lot of messages should be pr_info, not pr_debug * wholesale use of pr_debug makes it require *both* Kconfig and dynamic configuration * there are still a lot of ifdefs * the style is very inconsistent, sometimes the sdata->name is printed in front Clean up everything, introducing new macros and separating out the station MLME debugging into a new Kconfig symbol. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-22mac80211: remove TKIP debugJohannes Berg1-11/+0
The TKIP code hasn't been changed in a very long time, so it seems unlikely that anyone really has a need for the TKIP debug code. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-04-10mac80211: Implement mesh synchronization frameworkJavier Cardona1-0/+11
This patch adds MBSS extensible synchronization framework (Sec. 13.13.2 of IEEE Std. 802.11-2012). The framework is implemented via an ops table which defines the following functions: rx_bcn_presp() - this is called every time a mesh beacon is received. adjust_tbtt() - this is called immediately before a beacon is about to be transmitted. The default neighbor offset synchronization defined in the standard is implemented. We also provide template functions for vendor specific methods. When neighbor offset synchronization is active (which is the default) mesh neighbors in the same MBSS will track timing offsets to each other and compensate clock drift. In our tests we observed that this mesh synchronization implementation successfully corrected drifts between stations of ~2PPM while introducing a jitter of ~20us. It is also possible to test this framework on mac80211_hwsim simulated phys to see how it behaves under different topologies, over poor links, etc. Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de> Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28mac80211: remove tracing config symbolJohannes Berg1-12/+0
There's little point in this config symbol, if tracing is disabled the overhead is negligible and if you think it's too bad you can always turn off tracing completely. Also remove the part where we don't have sparse check the tracing code -- it seems that it can now deal with it (or the code changed). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: handle TDLS high-level commands and framesArik Nemtsov1-0/+12
Register and implement the TDLS cfg80211 callback functions. Internally prepare and send TDLS management frames. We incorporate local STA capabilities and supported rates with extra IEs given by usermode. The resulting packet is either encapsulated in a data frame, or assembled as an action frame. It is transmitted either directly or through the AP, as mandated by the TDLS specification. Declare support for the TDLS external setup wiphy capability. This tells usermode to handle link setup and discovery on its own, and use the kernel driver for sending TDLS mgmt packets. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24mac80211: improve mpath debuggingJavier Cardona1-0/+13
make hwmp_dbg print the relevant sdata->name by default and improve formatting. Also add mpath_dbg macro for debugging of mesh path operations. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04mac80211: remove the dependency on crypto_blkcipherFelix Fietkau1-1/+0
The only thing that using crypto_blkcipher with ecb does over just using arc4 directly is wrapping the encrypt/decrypt function into a for loop, looping over each individual character. To be able to do this, it pulls in around 40 kb worth of unnecessary kernel modules (at least on a MIPS embedded device). Using arc4 directly not only eliminates those dependencies, it also makes the code smaller. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-03-01mac80211: make rate control Kconfig warning depend on mac80211Johannes Berg1-1/+1
... Otherwise it is displayed when mac80211 isn't even turned on, which is completely pointless. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-22Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-02-18small adjustment to net/mac80211/KconfigJan Beulich1-1/+1
"def_bool n" without prompt is pointless, this should be just "bool". Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes1-3/+3
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-26Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/ipv4/fib_frontend.c
2010-12-07nl80211/mac80211: Report signal averageBruno Randolf1-0/+1
Extend nl80211 to report an exponential weighted moving average (EWMA) of the signal value. Since the signal value usually fluctuates between different packets, an average can be more useful than the value of the last packet. This uses the recently added generic EWMA library function. -- v2: fix ABI breakage and change factor to be a power of 2. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02leds: fix up dependenciesJohannes Berg1-1/+1
It's not useful to build LED triggers when there's no LEDs that can be triggered by them. Therefore, fix up the dependencies so that this cannot happen, and fix a few users that select triggers to depend on LEDS_CLASS as well (there is also one user that also selects LEDS_CLASS, which is OK). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Ingo Molnar <mingo@elte.hu> Cc: Arnd Hannemann <arnd@arndnet.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-24Revert "nl80211/mac80211: Report signal average"John W. Linville1-1/+0
This reverts commit 86107fd170bc379869250eb7e1bd393a3a70e8ae. This patch inadvertantly changed the userland ABI. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18nl80211/mac80211: Report signal averageBruno Randolf1-0/+1
Extend nl80211 to report an exponential weighted moving average (EWMA) of the signal value. Since the signal value usually fluctuates between different packets, an average can be more useful than the value of the last packet. This uses the recently added generic EWMA library function. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-30mac82011: Allow selection of minstrel_ht as default rc algorithmHelmut Schaa1-0/+1
Allow selection of minstrel_ht as default rate control algorithm. At the moment minstrel_ht can only be requested by the driver code but not selected as default in make menuconfig. Fix this by using minstrel_ht when minstrel was selected as default and minstrel_ht is available. This change won't affect legacy devices as minstrel_ht falls back to minstrel in that case. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02mac80211: add the minstrel_ht rate control algorithmFelix Fietkau1-0/+7
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08mac80211: enhance tracingJohannes Berg1-4/+4
Enhance tracing by adding tracing for a variety of callbacks that the drivers call, and also for internal calls (currently limited to queue status). This can aid debugging what is going on in mac80211 in interaction with drivers, since we can now see what drivers call and not just what mac80211 calls in the driver. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10mac80211: give warning if building w/out rate ctrl algorithmAndres Salomon1-0/+9
I discovered that if EMBEDDED=y, one can accidentally build a mac80211 stack and drivers w/ no rate control algorithm. For drivers like RTL8187 that don't supply their own RC algorithms, this will cause ieee80211_register_hw to fail (making the driver unusable). This will tell kconfig to provide a warning if no rate control algorithms have been selected. That'll at least warn the user; users that know that their drivers supply a rate control algorithm can safely ignore the warning, and those who don't know (or who expect to be using multiple drivers) can select a default RC algorithm. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21mac80211: remove payload alignment warningKalle Valo1-12/+0
The payload alignment warning enabled by MAC80211_DEBUG_PACKET_ALIGNMENT is difficult. To fix it, a firmware change is needed but in most cases that's very difficult. So the benefit from the warning is low and most probably it just creates more confusion for people who just enable all warnings (like it did for me). Remove the unaligned IP payload warning and the kconfig option. But leave the unaligned packet warning, it will be enabled with MAC80211_VERBOSE_DEBUG. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: add MAC80211_VERBOSE_MHWMP_DEBUGRui Paulo1-0/+13
Add MAC80211_VERBOSE_MHWMP_DEBUG, a debugging option for HWMP frame processing. Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-02wireless: remove mac80211 rate selection extra menuLuis R. Rodriguez1-3/+2
We can just display this upon enabling mac80211 with an 'if MAC80211 != n' check. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: Move mpath and mpp growth to mesh workqueue.Javier Cardona1-4/+4
This prevents calling rcu_synchronize from within the tx path by moving the table growth code to the mesh workqueue. Move mesh_table_free and mesh_table_grow from mesh.c to mesh_pathtbl.c and declare them static. Also, re-enable mesh in Kconfig and update the configuration description. Signed-off-by: Javier Cardona <javier@cozybit.com> Tested-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: self-contained wext handling where possibleJohannes Berg1-1/+0
Finally! This is what you've all been waiting for! This patch makes cfg80211 take care of wext emulation _completely_ by itself, drivers that don't need things cfg80211 doesn't do yet don't even need to be aware of wireless extensions. This means we can also clean up mac80211's and iwm's Kconfig and make it possible to build them w/o wext now! RIP wext. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: driver operation debuggingJohannes Berg1-0/+12
This makes mac80211 use the event tracing framework to log all operations as given to the driver. This will need to be extended with more information, but as a start it should be good. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-23Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwmc3200wifi/netdev.c net/wireless/scan.c
2009-07-21mac80211: disable meshJohannes Berg1-0/+1
My kvm instance was complaining a lot about sleeping in atomic contexts in the mesh code, and it turns out that both mesh_path_add() and mpp_path_add() need to be able to sleep (they even use synchronize_rcu()!). I put in a might_sleep() to annotate that, but I see no way, at least right now, of actually making sure those functions are only called from process context since they are both called during TX and RX and the mesh code itself even calls them with rcu_read_lock() "held". Therefore, let's disable it completely for now. It's possible that I'm only seeing this because the hwsim's beaconing is broken and thus the peers aren't discovered right away, but it is possible that this happens even if beaconing is working, for a peer that doesn't exist or so. It should be possible to solve this by deferring the freeing of the tables to call_rcu() instead of using synchronize_rcu(), and also using atomic allocations, but maybe it makes more sense to rework the code to not call these from atomic contexts and defer more of the work to the workqueue. Right now, I can't work on either of those solutions though. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: implement iwpowerJohannes Berg1-16/+0
Just on/off and timeout, and with a hacky cfg80211 method until we figure out what we want, though this is probably sufficient as we want to use pm_qos for wifi everywhere. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: fix Kconfig for users of cfg80211Johannes Berg1-1/+4
* iwm doesn't depend on cfg80211 or wireless extensions * rndis wlan selects cfg80211 - needs to depend * mac80211 selects cfg80211 - needs to depend Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: enable PS by defaultJohannes Berg1-0/+16
Enable PS by default (depending on Kconfig) -- rely on drivers to control the level using pm_qos. Due to the previous patch we turn off PS when necessary due to latency requirements. This has a Kconfig symbol so people can, if they really want, configure the default in their kernels. We may want to keep it at "default y" only in wireless-testing for a while. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20MAC80211: Remove unused MAC80211_VERBOSE_SPECT_MGMT_DEBUG.Robert P. J. Day1-7/+0
Remove this unused Kconfig variable, which Intel apparently once promised to make use of but never did. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-30trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante1-1/+1
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-26mac80211: make Minstrel the default rate control algorithmLuis R. Rodriguez1-4/+4
This makes minstrel the default rate control algorithm for mac80211. For more information see: http://wireless.kernel.org/en/developers/Documentation/mac80211/RateControl/minstrel If someone can come up with a better algorithm they get a prize (undisclosed). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-06mac80211: add the 'minstrel' rate control algorithmFelix Fietkau1-0/+13
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15mac80211: remove debug frame dumpingJohannes Berg1-13/+0
You can just pull up a monitor interface to get much more detailed information, or, when debugging a driver, insert dump code into the driver (which usually you will have to do anyway to dump the driver-specific information). Hence this option is useless. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-17mac80211: Reimplement WME using ->select_queue().David S. Miller1-11/+0
The only behavior change is that we do not drop packets under any circumstances. If that is absolutely needed, we could easily add it back. With cleanups and help from Johannes Berg. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17mac80211: Temporarily mark QoS support BROKEN.David S. Miller1-0/+1
We will undo this after a few changsets. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08net: Delete NETDEVICES_MULTIQUEUE kconfig option.David S. Miller1-3/+0
Multiple TX queue support is a core networking feature. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08mac80211: remove MAC80211_DEBUG from net/mac80211/Kconfig.Rami Rosen1-2/+1
This patch removes MAC80211_DEBUG from /net/mac80211/Kconfig (in MAC80211_DEBUG_COUNTERS config entry), and replaces MAC80211_DEBUG_MENU instead of MAC80211_DEBUG (in MAC80211_VERBOSE_SPECT_MGMT_DEBUG config entry). Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-02mac80211: rework debug settings and make debugging saferJohannes Berg1-39/+91
This patch reworks the mac80211 debug settings making them more focused and adding help text for those that didn't have one. It also removes a number of printks that can be triggered remotely and add no value, e.g. "too short deauthentication frame received - ignoring". If somebody really needs to debug that they should just add a monitor interface and look at the frames in wireshark. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-30build algorithms into the mac80211 moduleAdrian Bunk1-22/+9
The old infrastructure was: - the default algorithm is built into mac80211 - other algorithms get into their own modules The implementation of this complicated scheme was horrible (just look at net/mac80211/Makefile), and anyone adding a new algorithm would most likely not get it right at his first attempt. This patch therefore builds all enabled algorithms into the mac80211 module. The user interface for the rate control algorithms changes as follows: - first the user can choose which algorithms to enable (currently only MAC80211_RC_PID is available) - if more than one algorithm is enabled (currently not possible since only one algorithm is present) the user then chooses the default one Note: - MAC80211_RC_PID is always enables for CONFIG_EMBEDDED=n Technical changes: - all selected algorithms get into the mac80211 module - net/mac80211/Makefile can now become much less complicated - support for rc80211_pid_algo.c being modular is no longer required - this includes unexporting mesh_plink_broken Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 19:38:34 +0000