summaryrefslogtreecommitdiffstats
path: root/net/l2tp
AgeCommit message (Collapse)AuthorFilesLines
2016-10-20udp: must lock the socket in udp_disconnect()Eric Dumazet2-2/+2
Baozeng Ding reported KASAN traces showing uses after free in udp_lib_get_port() and other related UDP functions. A CONFIG_DEBUG_PAGEALLOC=y kernel would eventually crash. I could write a reproducer with two threads doing : static int sock_fd; static void *thr1(void *arg) { for (;;) { connect(sock_fd, (const struct sockaddr *)arg, sizeof(struct sockaddr_in)); } } static void *thr2(void *arg) { struct sockaddr_in unspec; for (;;) { memset(&unspec, 0, sizeof(unspec)); connect(sock_fd, (const struct sockaddr *)&unspec, sizeof(unspec)); } } Problem is that udp_disconnect() could run without holding socket lock, and this was causing list corruptions. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17l2tp: constify net_device_ops structuresJulia Lawall1-1/+1
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 3401 931 44 4376 1118 net/l2tp/l2tp_eth.o and after the change it is: text data bss dec hex filename 3993 347 44 4384 1120 net/l2tp/l2tp_eth.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10l2tp: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas3-5/+5
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02l2tp: fix use-after-free during module unloadSabrina Dubroca1-0/+3
Tunnel deletion is delayed by both a workqueue (l2tp_tunnel_delete -> wq -> l2tp_tunnel_del_work) and RCU (sk_destruct -> RCU -> l2tp_tunnel_destruct). By the time l2tp_tunnel_destruct() runs to destroy the tunnel and finish destroying the socket, the private data reserved via the net_generic mechanism has already been freed, but l2tp_tunnel_destruct() actually uses this data. Make sure tunnel deletion for the netns has completed before returning from l2tp_exit_net() by first flushing the tunnel removal workqueue, and then waiting for RCU callbacks to complete. Fixes: 167eb17e0b17 ("l2tp: create tunnel sockets in the right namespace") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01l2tp: make nla_policy conststephen hemminger1-1/+1
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23l2tp: Refactor the codes with existing macros instead of literal numberGao Feng1-11/+9
Use PPP_ALLSTATIONS, PPP_UI, and SEND_SHUTDOWN instead of 0xff, 0x03, and 2 separately. Signed-off-by: Gao Feng <fgao@ikuai8.com> Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-21Revert "l2tp: Refactor the codes with existing macros instead of literal number"David S. Miller1-4/+4
This reverts commit 5ab1fe72d5490978104fc493615ea29dd7238766. This change still has problems. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-21l2tp: Refactor the codes with existing macros instead of literal numberGao Feng1-4/+4
Use PPP_ALLSTATIONS, PPP_UI, and SEND_SHUTDOWN instead of 0xff, 0x03, and 2 separately. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19l2tp: Fix the connect status check in pppol2tp_getnameGao Feng1-1/+1
The sk->sk_state is bits flag, so need use bit operation check instead of value check. Signed-off-by: Gao Feng <fgao@ikuai8.com> Tested-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26l2tp: Correctly return -EBADF from pppol2tp_getname.phil.turnbull@oracle.com1-5/+2
If 'tunnel' is NULL we should return -EBADF but the 'end_put_sess' path unconditionally sets 'error' back to zero. Rework the error path so it more closely matches pppol2tp_sendmsg. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-11ipv6: use TOS marks from sockets for routing decisionHannes Frederic Sowa1-3/+5
In IPv6 the ToS values are part of the flowlabel in flowi6 and get extracted during fib rule lookup, but we forgot to correctly initialize the flowlabel before the routing lookup. Reported-by: <liam.mcbirnie@boeing.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: net/sched/act_police.c net/sched/sch_drr.c net/sched/sch_hfsc.c net/sched/sch_prio.c net/sched/sch_red.c net/sched/sch_tbf.c In net-next the drop methods of the packet schedulers got removed, so the bug fixes to them in 'net' are irrelevant. A packet action unload crash fix conflicts with the addition of the new firstuse timestamp. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net: add netdev_lockdep_set_classes() helperEric Dumazet1-5/+1
It is time to add netdev_lockdep_set_classes() helper so that lockdep annotations per device type are easier to manage. This removes a lot of copies and missing annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08l2tp: fix configuration passed to setup_udp_tunnel_sock()Guillaume Nault1-1/+1
Unused fields of udp_cfg must be all zeros. Otherwise setup_udp_tunnel_sock() fills ->gro_receive and ->gro_complete callbacks with garbage, eventually resulting in panic when used by udp_gro_receive(). [ 72.694123] BUG: unable to handle kernel paging request at ffff880033f87d78 [ 72.695518] IP: [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] PGD 26e2067 PUD 26e3067 PMD 342ed063 PTE 8000000033f87163 [ 72.696530] Oops: 0011 [#1] SMP KASAN [ 72.696530] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pptp gre pppox ppp_generic slhc crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel evdev aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper serio_raw acpi_cpufreq button proc\ essor ext4 crc16 jbd2 mbcache virtio_blk virtio_net virtio_pci virtio_ring virtio [ 72.696530] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.7.0-rc1 #1 [ 72.696530] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 72.696530] task: ffff880035b59700 ti: ffff880035b70000 task.ti: ffff880035b70000 [ 72.696530] RIP: 0010:[<ffff880033f87d78>] [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] RSP: 0018:ffff880035f87bc0 EFLAGS: 00010246 [ 72.696530] RAX: ffffed000698f996 RBX: ffff88003326b840 RCX: ffffffff814cc823 [ 72.696530] RDX: ffff88003326b840 RSI: ffff880033e48038 RDI: ffff880034c7c780 [ 72.696530] RBP: ffff880035f87c18 R08: 000000000000a506 R09: 0000000000000000 [ 72.696530] R10: ffff880035f87b38 R11: ffff880034b9344d R12: 00000000ebfea715 [ 72.696530] R13: 0000000000000000 R14: ffff880034c7c780 R15: 0000000000000000 [ 72.696530] FS: 0000000000000000(0000) GS:ffff880035f80000(0000) knlGS:0000000000000000 [ 72.696530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 72.696530] CR2: ffff880033f87d78 CR3: 0000000033c98000 CR4: 00000000000406a0 [ 72.696530] Stack: [ 72.696530] ffffffff814cc834 ffff880034b93468 0000001481416818 ffff88003326b874 [ 72.696530] ffff880034c7ccb0 ffff880033e48038 ffff88003326b840 ffff880034b93462 [ 72.696530] ffff88003326b88a ffff88003326b88c ffff880034b93468 ffff880035f87c70 [ 72.696530] Call Trace: [ 72.696530] <IRQ> [ 72.696530] [<ffffffff814cc834>] ? udp_gro_receive+0x1c6/0x1f9 [ 72.696530] [<ffffffff814ccb1c>] udp4_gro_receive+0x2b5/0x310 [ 72.696530] [<ffffffff814d989b>] inet_gro_receive+0x4a3/0x4cd [ 72.696530] [<ffffffff81431b32>] dev_gro_receive+0x584/0x7a3 [ 72.696530] [<ffffffff810adf7a>] ? __lock_is_held+0x29/0x64 [ 72.696530] [<ffffffff814321f7>] napi_gro_receive+0x124/0x21d [ 72.696530] [<ffffffffa000b145>] virtnet_receive+0x8df/0x8f6 [virtio_net] [ 72.696530] [<ffffffffa000b27e>] virtnet_poll+0x1d/0x8d [virtio_net] [ 72.696530] [<ffffffff81431350>] net_rx_action+0x15b/0x3b9 [ 72.696530] [<ffffffff815893d6>] __do_softirq+0x216/0x546 [ 72.696530] [<ffffffff81062392>] irq_exit+0x49/0xb6 [ 72.696530] [<ffffffff81588e9a>] do_IRQ+0xe2/0xfa [ 72.696530] [<ffffffff81587a49>] common_interrupt+0x89/0x89 [ 72.696530] <EOI> [ 72.696530] [<ffffffff810b05df>] ? trace_hardirqs_on_caller+0x229/0x270 [ 72.696530] [<ffffffff8102b3c7>] ? default_idle+0x1c/0x2d [ 72.696530] [<ffffffff8102b3c5>] ? default_idle+0x1a/0x2d [ 72.696530] [<ffffffff8102bb8c>] arch_cpu_idle+0xa/0xc [ 72.696530] [<ffffffff810a6c39>] default_idle_call+0x1a/0x1c [ 72.696530] [<ffffffff810a6d96>] cpu_startup_entry+0x15b/0x20f [ 72.696530] [<ffffffff81039a81>] start_secondary+0x12c/0x133 [ 72.696530] Code: ff ff ff ff ff ff ff ff ff ff 7f ff ff ff ff ff ff ff 7f 00 7e f8 33 00 88 ff ff 6d 61 58 81 ff ff ff ff 5e de 0a 81 ff ff ff ff <00> 5c e2 34 00 88 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 72.696530] RIP [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] RSP <ffff880035f87bc0> [ 72.696530] CR2: ffff880033f87d78 [ 72.696530] ---[ end trace ad7758b9a1dccf99 ]--- [ 72.696530] Kernel panic - not syncing: Fatal exception in interrupt [ 72.696530] Kernel Offset: disabled [ 72.696530] ---[ end Kernel panic - not syncing: Fatal exception in interrupt v2: use empty initialiser instead of "{ NULL }" to avoid relying on first field's type. Fixes: 38fd2af24fcf ("udp: Add socket based GRO and config") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net_sched: transform qdisc running bit into a seqcountEric Dumazet1-0/+4
Instead of using a single bit (__QDISC___STATE_RUNNING) in sch->__state, use a seqcount. This adds lockdep support, but more importantly it will allow us to sample qdisc/class statistics without having to grab qdisc root lock. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-30net: l2tp: Make l2tp_ip6 namespace awareShmulik Ladkani1-5/+7
l2tp_ip6 tunnel and session lookups were still using init_net, although the l2tp core infrastructure already supports lookups keyed by 'net'. As a result, l2tp_ip6_recv discarded packets for tunnels/sessions created in namespaces other than the init_net. Fix, by using dev_net(skb->dev) or sock_net(sk) where appropriate. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03ipv6: add new struct ipcm6_cookieWei Wang1-15/+18
In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-01net: l2tp: fix reversed udp6 checksum flagsWang Shanker1-2/+2
This patch fixes a bug which causes the behavior of whether to ignore udp6 checksum of udp6 encapsulated l2tp tunnel contrary to what userspace program requests. When the flag `L2TP_ATTR_UDP_ZERO_CSUM6_RX` is set by userspace, it is expected that udp6 checksums of received packets of the l2tp tunnel to create should be ignored. In `l2tp_netlink.c`: `l2tp_nl_cmd_tunnel_create()`, `cfg.udp6_zero_rx_checksums` is set according to the flag, and then passed to `l2tp_core.c`: `l2tp_tunnel_create()` and then `l2tp_tunnel_sock_create()`. In `l2tp_tunnel_sock_create()`, `udp_conf.use_udp6_rx_checksums` is set the same to `cfg.udp6_zero_rx_checksums`. However, if we want the checksum to be ignored, `udp_conf.use_udp6_rx_checksums` should be set to `false`, i.e. be set to the contrary. Similarly, the same should be done to `udp_conf.use_udp6_tx_checksums`. Signed-off-by: Miao Wang <shankerwangmiao@gmail.com> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25l2tp: use nla_put_u64_64bit()Nicolas Dichtel1-32/+48
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23libnl: nla_put_msecs(): align on a 64-bit areaNicolas Dichtel1-1/+2
nla_data() is now aligned on a 64-bit area. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-6/+10
2016-04-04ipv6: l2tp: fix a potential issue in l2tp_ip6_recvHaishuang Yan1-3/+5
pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04ipv4: l2tp: fix a potential issue in l2tp_ip_recvHaishuang Yan1-3/+5
pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04sock: enable timestamping using control messagesSoheil Hassas Yeganeh1-1/+1
Currently, SOL_TIMESTAMPING can only be enabled using setsockopt. This is very costly when users want to sample writes to gather tx timestamps. Add support for enabling SO_TIMESTAMPING via control messages by using tsflags added in `struct sockcm_cookie` (added in the previous patches in this series) to set the tx_flags of the last skb created in a sendmsg. With this patch, the timestamp recording bits in tx_flags of the skbuff is overridden if SO_TIMESTAMPING is passed in a cmsg. Please note that this is only effective for overriding the recording timestamps flags. Users should enable timestamp reporting (e.g., SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_OPT_ID) using socket options and then should ask for SOF_TIMESTAMPING_TX_* using control messages per sendmsg to sample timestamps for each write. Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04ipv6: process socket-level control messages in IPv6Soheil Hassas Yeganeh1-3/+5
Process socket-level control messages by invoking __sock_cmsg_send in ip6_datagram_send_ctl for control messages on the SOL_SOCKET layer. This makes sure whenever ip6_datagram_send_ctl is called for udp and raw, we also process socket-level control messages. This is a bit uglier than IPv4, since IPv6 does not have something like ipcm_cookie. Perhaps we can later create a control message cookie for IPv6? Note that this commit interprets new control messages that were ignored before. As such, this commit does not change the behavior of IPv6 control messages. Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+14
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17l2tp: Fix error creating L2TP tunnelsMark Tomlinson1-4/+14
A previous commit (33f72e6) added notification via netlink for tunnels when created/modified/deleted. If the notification returned an error, this error was returned from the tunnel function. If there were no listeners, the error code ESRCH was returned, even though having no listeners is not an error. Other calls to this and other similar notification functions either ignore the error code, or filter ESRCH. This patch checks for ESRCH and does not flag this as an error. Reviewed-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11inet: create IPv6-equivalent inet_hash functionCraig Gallek1-1/+2
In order to support fast lookups for TCP sockets with SO_REUSEPORT, the function that adds sockets to the listening hash set needs to be able to check receive address equality. Since this equality check is different for IPv4 and IPv6, we will need two different socket hashing functions. This patch adds inet6_hash identical to the existing inet_hash function and updates the appropriate references. A following patch will differentiate the two by passing different comparison functions to __inet_hash. Additionally, in order to use the IPv6 address equality function from inet6_hashtables (which is compiled as a built-in object when IPv6 is enabled) it also needs to be in a built-in object file as well. This moves ipv6_rcv_saddr_equal into inet_hashtables to accomplish this. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04l2tp: rely on ppp layer for skb scrubbingGuillaume Nault1-16/+1
Since 79c441ae505c ("ppp: implement x-netns support"), the PPP layer calls skb_scrub_packet() whenever the skb is received on the PPP device. Manually resetting packet meta-data in the L2TP layer is thus redundant. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+6
Conflicts: drivers/net/ethernet/renesas/ravb_main.c kernel/bpf/syscall.c net/ipv4/ipmr.c All three conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03pppox: use standard module auto-loading featureGuillaume Nault1-1/+1
* Register PF_PPPOX with pppox module rather than with pppoe, so that pppoe doesn't get loaded for any PF_PPPOX socket. * Register PX_PROTO_* with standard MODULE_ALIAS_NET_PF_PROTO() instead of using pppox's own naming scheme. * While there, add auto-loading feature for pptp. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02ipv6: add complete rcu protection around np->optEric Dumazet1-2/+6
This patch addresses multiple problems : UDP/RAW sendmsg() need to get a stable struct ipv6_txoptions while socket is not locked : Other threads can change np->opt concurrently. Dmitry posted a syzkaller (http://github.com/google/syzkaller) program desmonstrating use-after-free. Starting with TCP/DCCP lockless listeners, tcp_v6_syn_recv_sock() and dccp_v6_request_recv_sock() also need to use RCU protection to dereference np->opt once (before calling ipv6_dup_options()) This patch adds full RCU protection to np->opt Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+9
Conflicts: net/dsa/slave.c net/dsa/slave.c simply had overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28l2tp: protect tunnel->del_work by ref_countAlexander Couzens1-2/+9
There is a small chance that tunnel_free() is called before tunnel->del_work scheduled resulting in a zero pointer dereference. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25l2tp: auto load IP modulesstephen hemminger2-0/+2
When creating a IP encapsulated tunnel the necessary l2tp module should be loaded. It already works for UDP encapsulation, it just doesn't work for direct IP encap. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25l2tp: auto load type modulesstephen hemminger4-0/+12
It should not be necessary to do explicit module loading when configuring L2TP. Modules should be loaded as needed instead (as is done already with netlink and other tunnel types). This patch adds a new module alias type and code to load the sub module on demand. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11net: Modify sk_alloc to not reference count the netns of kernel sockets.Eric W. Biederman1-9/+6
Now that sk_alloc knows when a kernel socket is being allocated modify it to not reference count the network namespace of kernel sockets. Keep track of if a socket needs reference counting by adding a flag to struct sock called sk_net_refcnt. Update all of the callers of sock_create_kern to stop using sk_change_net and sk_release_kernel as those hacks are no longer needed, to avoid reference counting a kernel socket. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11net: Pass kern from net_proto_family.create to sk_allocEric W. Biederman1-2/+2
In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11net: Add a struct net parameter to sock_create_kernEric W. Biederman1-2/+2
This is long overdue, and is part of cleaning up how we allocate kernel sockets that don't reference count struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Conflicts: drivers/net/ethernet/mellanox/mlx4/cmd.c net/core/fib_rules.c net/ipv4/fib_frontend.c The fib_rules.c and fib_frontend.c conflicts were locking adjustments in 'net' overlapping addition and removal of code in 'net-next'. The mlx4 conflict was a bug fix in 'net' happening in the same place a constant was being replaced with a more suitable macro. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06l2tp: unregister l2tp_net_ops on failure pathWANG Cong1-0/+1
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_get_in_addr and nla_get_in6_addrJiri Benc1-2/+2
Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_put_in_addr and nla_put_in6_addrJiri Benc1-6/+8
IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03l2tp: Use eth_<foo>_addr instead of memsetJoe Perches1-1/+1
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02net: Remove iocb argument from sendmsg and recvmsgYing Xue3-11/+8
After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg1-4/+6
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31l2tp : multicast notification to the registered listenersBill Hong1-10/+91
Previously l2tp module did not provide any means for the user space to get notified when tunnels/sessions are added/modified/deleted. This change contains the following - create a multicast group for the listeners to register. - notify the registered listeners when the tunnels/sessions are created/modified/deleted. Signed-off-by: Bill Hong <bhong@brocade.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Sven-Thorsten Dietrich <sven@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 03:55:24 +0000