summaryrefslogtreecommitdiffstats
path: root/net/l2tp
AgeCommit message (Collapse)AuthorFilesLines
2018-04-13l2tp: hold reference on tunnels printed in l2tp/tunnels debugfs fileGuillaume Nault3-23/+13
Use l2tp_tunnel_get_nth() instead of l2tp_tunnel_find_nth(), to be safe against concurrent tunnel deletion. Use the same mechanism as in l2tp_ppp.c for dropping the reference taken by l2tp_tunnel_get_nth(). That is, drop the reference just before looking up the next tunnel. In case of error, drop the last accessed tunnel in l2tp_dfs_seq_stop(). That was the last use of l2tp_tunnel_find_nth(). Fixes: 0ad6614048cf ("l2tp: Add debugfs files for dumping l2tp debug info") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-13l2tp: hold reference on tunnels printed in pppol2tp proc fileGuillaume Nault1-7/+17
Use l2tp_tunnel_get_nth() instead of l2tp_tunnel_find_nth(), to be safe against concurrent tunnel deletion. Unlike sessions, we can't drop the reference held on tunnels in pppol2tp_seq_show(). Tunnels are reused across several calls to pppol2tp_seq_start() when iterating over sessions. These iterations need the tunnel for accessing the next session. Therefore the only safe moment for dropping the reference is just before searching for the next tunnel. Normally, the last invocation of pppol2tp_next_tunnel() doesn't find any new tunnel, so it drops the last tunnel without taking any new reference. However, in case of error, pppol2tp_seq_stop() is called directly, so we have to drop the reference there. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-13l2tp: hold reference on tunnels in netlink dumpsGuillaume Nault3-3/+30
l2tp_tunnel_find_nth() is unsafe: no reference is held on the returned tunnel, therefore it can be freed whenever the caller uses it. This patch defines l2tp_tunnel_get_nth() which works similarly, but also takes a reference on the returned tunnel. The caller then has to drop it after it stops using the tunnel. Convert netlink dumps to make them safe against concurrent tunnel deletion. Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11l2tp: fix race in duplicate tunnel detectionGuillaume Nault3-28/+14
We can't use l2tp_tunnel_find() to prevent l2tp_nl_cmd_tunnel_create() from creating a duplicate tunnel. A tunnel can be concurrently registered after l2tp_tunnel_find() returns. Therefore, searching for duplicates must be done at registration time. Finally, remove l2tp_tunnel_find() entirely as it isn't use anywhere anymore. Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11l2tp: fix races in tunnel creationGuillaume Nault4-110/+110
l2tp_tunnel_create() inserts the new tunnel into the namespace's tunnel list and sets the socket's ->sk_user_data field, before returning it to the caller. Therefore, there are two ways the tunnel can be accessed and freed, before the caller even had the opportunity to take a reference. In practice, syzbot could crash the module by closing the socket right after a new tunnel was returned to pppol2tp_create(). This patch moves tunnel registration out of l2tp_tunnel_create(), so that the caller can safely hold a reference before publishing the tunnel. This second step is done with the new l2tp_tunnel_register() function, which is now responsible for associating the tunnel to its socket and for inserting it into the namespace's list. While moving the code to l2tp_tunnel_register(), a few modifications have been done. First, the socket validation tests are done in a helper function, for clarity. Also, modifying the socket is now done after having inserted the tunnel to the namespace's tunnels list. This will allow insertion to fail, without having to revert theses modifications in the error path (a followup patch will check for duplicate tunnels before insertion). Either the socket is a kernel socket which we control, or it is a user-space socket for which we have a reference on the file descriptor. In any case, the socket isn't going to be closed from under us. Reported-by: syzbot+fbeeb5c3b538e8545644@syzkaller.appspotmail.com Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai2-2/+0
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26net: Use octal not symbolic permissionsJoe Perches1-1/+1
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-25/+24
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17net: Convert l2tp_net_opsKirill Tkhai1-0/+1
Init method is rather simple. Exit method queues del_work for every tunnel from per-net list. This seems to be safe to be marked async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-12l2tp: fix races with ipv4-mapped ipv6 addressesPaolo Abeni2-23/+18
The l2tp_tunnel_create() function checks for v4mapped ipv6 sockets and cache that flag, so that l2tp core code can reusing it at xmit time. If the socket is provided by the userspace, the connection status of the tunnel sockets can change between the tunnel creation and the xmit call, so that syzbot is able to trigger the following splat: BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:192 [inline] BUG: KASAN: use-after-free in ip6_xmit+0x1f76/0x2260 net/ipv6/ip6_output.c:264 Read of size 8 at addr ffff8801bd949318 by task syz-executor4/23448 CPU: 0 PID: 23448 Comm: syz-executor4 Not tainted 4.16.0-rc4+ #65 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 ip6_dst_idev include/net/ip6_fib.h:192 [inline] ip6_xmit+0x1f76/0x2260 net/ipv6/ip6_output.c:264 inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139 l2tp_xmit_core net/l2tp/l2tp_core.c:1053 [inline] l2tp_xmit_skb+0x105f/0x1410 net/l2tp/l2tp_core.c:1148 pppol2tp_sendmsg+0x470/0x670 net/l2tp/l2tp_ppp.c:341 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2046 __sys_sendmsg+0xe5/0x210 net/socket.c:2080 SYSC_sendmsg net/socket.c:2091 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2087 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x453e69 RSP: 002b:00007f819593cc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f819593d6d4 RCX: 0000000000453e69 RDX: 0000000000000081 RSI: 000000002037ffc8 RDI: 0000000000000004 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000004c3 R14: 00000000006f72e8 R15: 0000000000000000 This change addresses the issues: * explicitly checking for TCP_ESTABLISHED for user space provided sockets * dropping the v4mapped flag usage - it can become outdated - and explicitly invoking ipv6_addr_v4mapped() instead The issue is apparently there since ancient times. v1 -> v2: (many thanks to Guillaume) - with csum issue introduced in v1 - replace pr_err with pr_debug - fix build issue with IPV6 disabled - move l2tp_sk_is_v4mapped in l2tp_core.c v2 -> v3: - don't update inet_daddr for v4mapped address, unneeded - drop rendundant check at creation time Reported-and-tested-by: syzbot+92fa328176eb07e4ac1a@syzkaller.appspotmail.com Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07l2tp: do not accept arbitrary socketsEric Dumazet1-2/+6
syzkaller found an issue caused by lack of sufficient checks in l2tp_tunnel_create() RAW sockets can not be considered as UDP ones for instance. In another patch, we shall replace all pr_err() by less intrusive pr_debug() so that syzkaller can find other bugs faster. Acked-by: Guillaume Nault <g.nault@alphalink.fr> Acked-by: James Chapman <jchapman@katalix.com> ================================================================== BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69 dst_release: dst:00000000d53d0d0f refcnt:-1 Write of size 1 at addr ffff8801d013b798 by task syz-executor3/6242 CPU: 1 PID: 6242 Comm: syz-executor3 Not tainted 4.16.0-rc2+ #253 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23b/0x360 mm/kasan/report.c:412 __asan_report_store1_noabort+0x17/0x20 mm/kasan/report.c:435 setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69 l2tp_tunnel_create+0x1354/0x17f0 net/l2tp/l2tp_core.c:1596 pppol2tp_connect+0x14b1/0x1dd0 net/l2tp/l2tp_ppp.c:707 SYSC_connect+0x213/0x4a0 net/socket.c:1640 SyS_connect+0x24/0x30 net/socket.c:1621 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller5-166/+77
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27net: Convert /proc creating and destroying pernet_operationsKirill Tkhai1-0/+1
These pernet_operations just create and destroy /proc entries, and they can safely marked as async: pppoe_net_ops vlan_net_ops canbcm_pernet_ops kcm_net_ops pfkey_net_ops pppol2tp_net_ops phonet_net_ops Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: fix tunnel lookup use-after-free raceJames Chapman1-7/+7
l2tp_tunnel_get walks the tunnel list to find a matching tunnel instance and if a match is found, its refcount is increased before returning the tunnel pointer. But when tunnel objects are destroyed, they are on the tunnel list after their refcount hits zero. Fix this by moving the code that removes the tunnel from the tunnel list from the tunnel socket destructor into in the l2tp_tunnel_delete path, before the tunnel refcount is decremented. refcount_t: increment on 0; use-after-free. WARNING: CPU: 3 PID: 13507 at lib/refcount.c:153 refcount_inc+0x47/0x50 Modules linked in: CPU: 3 PID: 13507 Comm: syzbot_6e6a5ec8 Not tainted 4.16.0-rc2+ #36 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:refcount_inc+0x47/0x50 RSP: 0018:ffff8800136ffb20 EFLAGS: 00010286 RAX: dffffc0000000008 RBX: ffff880017068e68 RCX: ffffffff814d3333 RDX: 0000000000000000 RSI: ffff88001a59f6d8 RDI: ffff88001a59f6d8 RBP: ffff8800136ffb28 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8800136ffab0 R11: 0000000000000000 R12: ffff880017068e50 R13: 0000000000000000 R14: ffff8800174da800 R15: 0000000000000004 FS: 00007f403ab1e700(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205fafd2 CR3: 0000000016770000 CR4: 00000000000006e0 Call Trace: l2tp_tunnel_get+0x2dd/0x4e0 pppol2tp_connect+0x428/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f403a42f259 RSP: 002b:00007f403ab1dee8 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00000000205fafe4 RCX: 00007f403a42f259 RDX: 000000000000002e RSI: 00000000205fafd2 RDI: 0000000000000004 RBP: 00007f403ab1df20 R08: 00007f403ab1e700 R09: 0000000000000000 R10: 00007f403ab1e700 R11: 0000000000000296 R12: 0000000000000000 R13: 00007ffc81906cbf R14: 0000000000000000 R15: 00007f403ab2b040 Code: 3b ff 5b 5d c3 e8 ca 5f 3b ff 80 3d 49 8e 66 04 00 75 ea e8 bc 5f 3b ff 48 c7 c7 60 69 64 85 c6 05 34 8e 66 04 01 e8 59 49 15 ff <0f> 0b eb ce 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49 Fixes: f8ccac0e44934 ("l2tp: put tunnel socket release on a workqueue") Reported-and-tested-by: syzbot+19c09769f14b48810113@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+347bd5acde002e353a36@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+6e6a5ec8de31a94cd015@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+9df43faf09bd400f2993@syzkaller.appspotmail.com Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: fix race in pppol2tp_release with session object destroyJames Chapman1-25/+27
pppol2tp_release uses call_rcu to put the final ref on its socket. But the session object doesn't hold a ref on the session socket so may be freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by having the session hold a ref on its socket until the session is destroyed. It is this ref that is dropped via call_rcu. Sessions are also deleted via l2tp_tunnel_closeall. This must now also put the final ref via call_rcu. So move the call_rcu call site into pppol2tp_session_close so that this happens in both destroy paths. A common destroy path should really be implemented, perhaps with l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release does, but this will be looked at later. ODEBUG: activate active (active state 1) object type: rcu_head hint: (null) WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220 Modules linked in: CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:debug_print_object+0x166/0x220 RSP: 0018:ffff880013647a00 EFLAGS: 00010082 RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0 RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0 Call Trace: debug_object_activate+0x38b/0x530 ? debug_object_assert_init+0x3b0/0x3b0 ? __mutex_unlock_slowpath+0x85/0x8b0 ? pppol2tp_session_destruct+0x110/0x110 __call_rcu.constprop.66+0x39/0x890 ? __call_rcu.constprop.66+0x39/0x890 call_rcu_sched+0x17/0x20 pppol2tp_release+0x2c7/0x440 ? fcntl_setlk+0xca0/0xca0 ? sock_alloc_file+0x340/0x340 sock_release+0x92/0x1e0 sock_close+0x1b/0x20 __fput+0x296/0x6e0 ____fput+0x1a/0x20 task_work_run+0x127/0x1a0 do_exit+0x7f9/0x2ce0 ? SYSC_connect+0x212/0x310 ? mm_update_next_owner+0x690/0x690 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 do_group_exit+0x10d/0x330 ? do_group_exit+0x330/0x330 SyS_exit_group+0x22/0x30 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f362e471259 RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259 RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000 RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000 Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e 8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 Fixes: ee40fb2e1eb5b ("l2tp: protect sock pointer of struct pppol2tp_session with RCU") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: fix races with tunnel socket closeJames Chapman4-116/+42
The tunnel socket tunnel->sock (struct sock) is accessed when preparing a new ppp session on a tunnel at pppol2tp_session_init. If the socket is closed by a thread while another is creating a new session, the threads race. In pppol2tp_connect, the tunnel object may be created if the pppol2tp socket is associated with the special session_id 0 and the tunnel socket is looked up using the provided fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel socket to prevent it being destroyed during pppol2tp_connect since this may itself may race with the socket being destroyed. Doing sockfd_lookup in pppol2tp_connect isn't sufficient to prevent tunnel->sock going away either because a given tunnel socket fd may be reused between calls to pppol2tp_connect. Instead, have l2tp_tunnel_create sock_hold the tunnel socket before it does sockfd_put. This ensures that the tunnel's socket is always extant while the tunnel object exists. Hold a ref on the socket until the tunnel is destroyed and ensure that all tunnel destroy paths go through a common function (l2tp_tunnel_delete) since this will do the final sock_put to release the tunnel socket. Since the tunnel's socket is now guaranteed to exist if the tunnel exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel to derive the tunnel from the socket since this is always sk_user_data. Also, sessions no longer sock_hold the tunnel socket since sessions already hold a tunnel ref and the tunnel sock will not be freed until the tunnel is freed. Removing these sock_holds in l2tp_session_register avoids a possible sock leak in the pppol2tp_connect error path if l2tp_session_register succeeds but attaching a ppp channel fails. The pppol2tp_connect error path could have been fixed instead and have the sock ref dropped when the session is freed, but doing a sock_put of the tunnel socket when the session is freed would require a new session_free callback. It is simpler to just remove the sock_hold of the tunnel socket in l2tp_session_register, now that the tunnel socket lifetime is guaranteed. Finally, some init code in l2tp_tunnel_create is reordered to ensure that the new tunnel object's refcount is set and the tunnel socket ref is taken before the tunnel socket destructor callbacks are set. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:pppol2tp_session_init+0x1d6/0x500 RSP: 0018:ffff88001377fb40 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228 RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002 R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76 FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0 Call Trace: pppol2tp_connect+0xd18/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7ffb3e376259 RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259 RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004 RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000 Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16 Fixes: 80d84ef3ff1dd ("l2tp: prevent l2tp_tunnel_delete racing with userspace close") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: don't use inet_shutdown on ppp session destroyJames Chapman1-10/+0
Previously, if a ppp session was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our session will be detached anyway). BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0 Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296 CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack+0x101/0x157 ? inet_shutdown+0x5d/0x1c0 print_address_description+0x78/0x260 ? inet_shutdown+0x5d/0x1c0 kasan_report+0x240/0x360 __asan_load4+0x78/0x80 inet_shutdown+0x5d/0x1c0 ? pppol2tp_show+0x80/0x80 pppol2tp_session_close+0x68/0xb0 l2tp_tunnel_closeall+0x199/0x210 ? udp_v6_flush_pending_frames+0x90/0x90 l2tp_udp_encap_destroy+0x6b/0xc0 ? l2tp_tunnel_del_work+0x2e0/0x2e0 udpv6_destroy_sock+0x8c/0x90 sk_common_release+0x47/0x190 udp_lib_close+0x15/0x20 inet_release+0x85/0xd0 inet6_release+0x43/0x60 sock_release+0x53/0x100 ? sock_alloc_file+0x260/0x260 sock_close+0x1b/0x20 __fput+0x19f/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7fe240a45259 RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259 RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5 RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000 R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000 R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040 Allocated by task 8331: save_stack+0x43/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x144/0x3e0 sock_alloc_inode+0x22/0x130 alloc_inode+0x3d/0xf0 new_inode_pseudo+0x1c/0x90 sock_alloc+0x30/0x110 __sock_create+0xaa/0x4c0 SyS_socket+0xbe/0x130 do_syscall_64+0x128/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Freed by task 8314: save_stack+0x43/0xd0 __kasan_slab_free+0x11a/0x170 kasan_slab_free+0xe/0x10 kmem_cache_free+0x88/0x2b0 sock_destroy_inode+0x49/0x50 destroy_inode+0x77/0xb0 evict+0x285/0x340 iput+0x429/0x530 dentry_unlink_inode+0x28c/0x2c0 __dentry_kill+0x1e3/0x2f0 dput.part.21+0x500/0x560 dput+0x24/0x30 __fput+0x2aa/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Fixes: fd558d186df2c ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: don't use inet_shutdown on tunnel destroyJames Chapman1-9/+2
Previously, if a tunnel was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our tunnel will be detached anyway). BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 IP: __lock_acquire+0x263/0x1630 PGD 0 P4D 0 Oops: 0000 [#1] SMP KASAN Modules linked in: CPU: 2 PID: 42 Comm: kworker/u8:2 Not tainted 4.15.0-rc7+ #129 Workqueue: l2tp l2tp_tunnel_del_work RIP: 0010:__lock_acquire+0x263/0x1630 RSP: 0018:ffff88001a37fc70 EFLAGS: 00010002 RAX: 0000000000000001 RBX: 0000000000000088 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001a37fd18 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000076fd R12: 00000000000000a0 R13: ffff88001a3722c0 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001ad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a0 CR3: 000000001730b000 CR4: 00000000000006e0 Call Trace: ? __lock_acquire+0xc77/0x1630 ? console_trylock+0x11/0xa0 lock_acquire+0x117/0x230 ? lock_sock_nested+0x3a/0xa0 _raw_spin_lock_bh+0x3a/0x50 ? lock_sock_nested+0x3a/0xa0 lock_sock_nested+0x3a/0xa0 inet_shutdown+0x33/0xf0 l2tp_tunnel_del_work+0x60/0xef process_one_work+0x1ea/0x5f0 ? process_one_work+0x162/0x5f0 worker_thread+0x48/0x3e0 ? trace_hardirqs_on+0xd/0x10 kthread+0x108/0x140 ? process_one_work+0x5f0/0x5f0 ? kthread_stop+0x2a0/0x2a0 ret_from_fork+0x24/0x30 Code: 00 41 81 ff ff 1f 00 00 0f 87 7a 13 00 00 45 85 f6 49 8b 85 68 08 00 00 0f 84 ae 03 00 00 c7 44 24 18 00 00 00 00 e9 f0 00 00 00 <49> 81 3c 24 80 93 3f 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f RIP: __lock_acquire+0x263/0x1630 RSP: ffff88001a37fc70 CR2: 00000000000000a0 Fixes: 309795f4bec2d ("l2tp: Add netlink control API for L2TP") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-12net: make getname() functions return length rather than use int* parameterDenys Vlasenko3-9/+6
Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19l2tp: remove switch block in l2tp_nl_cmd_session_create()Lorenzo Bianconi1-21/+0
Remove the switch block in l2tp_nl_cmd_session_create() that checks pseudowire-specific parameters since just L2TP_PWTYPE_ETH and L2TP_PWTYPE_PPP are currently supported and no actual checks are performed. Moreover the L2TP_PWTYPE_IP/default case presents a harmless issue in error handling (break instead of goto out_tunnel) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19l2tp: remove l2specific_len configurable parameterLorenzo Bianconi4-8/+1
Remove l2specific_len configuration parameter since now L2-Specific Sublayer length is computed according to l2specific_type provided by userspace. Reviewed-by: Guillaume Nault <g.nault@alphalink.fr> Tested-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19l2tp: remove l2specific_len dependency in l2tp_coreLorenzo Bianconi2-18/+27
Remove l2specific_len dependency while building l2tpv3 header or parsing the received frame since default L2-Specific Sublayer is always four bytes long and we don't need to rely on a user supplied value. Moreover in l2tp netlink code there are no sanity checks to enforce the relation between l2specific_len and l2specific_type, so sending a malformed netlink message is possible to set l2specific_type to L2TP_L2SPECTYPE_DEFAULT (or even L2TP_L2SPECTYPE_NONE) and set l2specific_len to a value greater than 4 leaking memory on the wire and sending corrupted frames. Reviewed-by: Guillaume Nault <g.nault@alphalink.fr> Tested-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19l2tp: double-check l2specific_type provided by userspaceLorenzo Bianconi1-2/+9
Add sanity check on l2specific_type provided by userspace in l2tp_nl_cmd_session_create() since just L2TP_L2SPECTYPE_DEFAULT and L2TP_L2SPECTYPE_NONE are currently supported. Moreover explicitly set l2specific_type to L2TP_L2SPECTYPE_DEFAULT only if the userspace does not provide a value for it Reviewed-by: Guillaume Nault <g.nault@alphalink.fr> Tested-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: delete /proc THIS_MODULE referencesAlexey Dobriyan1-1/+0
/proc has been ignoring struct file_operations::owner field for 10 years. Specifically, it started with commit 786d7e1612f0b0adb6046f19b906609e4fe8b1ba ("Fix rmmod/read/write races in /proc entries"). Notice the chunk where inode->i_fop is initialized with proxy struct file_operations for regular files: - if (de->proc_fops) - inode->i_fop = de->proc_fops; + if (de->proc_fops) { + if (S_ISREG(inode->i_mode)) + inode->i_fop = &proc_reg_file_ops; + else + inode->i_fop = de->proc_fops; + } VFS stopped pinning module at this point. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08l2tp: adjust comments about L2TPv3 offsetsGuillaume Nault1-4/+3
The "offset" option has been removed by commit 900631ee6a26 ("l2tp: remove configurable payload offset"). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05l2tp: remove configurable payload offsetJames Chapman4-18/+6
If L2TP_ATTR_OFFSET is set to a non-zero value in L2TPv3 tunnels, it results in L2TPv3 packets being transmitted which might not be compliant with the L2TPv3 RFC. This patch has l2tp ignore the offset setting and send all packets with no offset. In more detail: L2TPv2 supports a variable offset from the L2TPv2 header to the payload. The offset value is indicated by an optional field in the L2TP header. Our L2TP implementation already detects the presence of the optional offset and skips that many bytes when handling data received packets. All transmitted packets are always transmitted with no offset. L2TPv3 has no optional offset field in the L2TPv3 packet header. Instead, L2TPv3 defines optional fields in a "Layer-2 Specific Sublayer". At the time when the original L2TP code was written, there was talk at IETF of offset being implemented in a new Layer-2 Specific Sublayer. A L2TP_ATTR_OFFSET netlink attribute was added so that this offset could be configured and the intention was to allow it to be also used to set the tx offset for L2TPv2. However, no L2TPv3 offset was ever specified and the L2TP_ATTR_OFFSET parameter was forgotten about. Setting L2TP_ATTR_OFFSET results in L2TPv3 packets being transmitted with the specified number of bytes padding between L2TPv3 header and payload. This is not compliant with L2TPv3 RFC3931. This change removes the configurable offset altogether while retaining L2TP_ATTR_OFFSET for backwards compatibility. Any L2TP_ATTR_OFFSET value is ignored. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05l2tp: revert "l2tp: fix missing print session offset info"James Chapman1-2/+0
Revert commit 820da5357572 ("l2tp: fix missing print session offset info"). The peer_offset parameter is removed. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05l2tp: revert "l2tp: add peer_offset parameter"James Chapman4-37/+8
Revert commit f15bc54eeecd ("l2tp: add peer_offset parameter"). This is removed because it is adding another configurable offset and configurable offsets are being removed. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27l2tp: add peer_offset parameterLorenzo Bianconi4-8/+37
Introduce peer_offset parameter in order to add the capability to specify two different values for payload offset on tx/rx side. If just offset is provided by userspace use it for rx side as well in order to maintain compatibility with older l2tp versions Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27l2tp: fix missing print session offset infoHangbin Liu1-0/+2
Report offset parameter in L2TP_CMD_SESSION_GET command if it has been configured by userspace Fixes: 309795f4bec ("l2tp: Add netlink control API for L2TP") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14l2tp: exit_net cleanup check addedVasily Averin1-0/+4
Be sure that l2tp_session_hlist array initialized in net_init hook was return to initial state. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11l2tp: remove the .tunnel_sock field from struct pppol2tp_sessionGuillaume Nault1-10/+0
The last user of .tunnel_sock is pppol2tp_connect() which defensively uses it to verify internal data consistency. This check isn't necessary: l2tp_session_get() guarantees that the returned session belongs to the tunnel passed as parameter. And .tunnel_sock is never updated, so checking that it still points to the parent tunnel socket is useless; that test can never fail. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11l2tp: avoid using ->tunnel_sock for getting session's parent tunnelGuillaume Nault1-54/+12
Sessions don't need to use l2tp_sock_to_tunnel(xxx->tunnel_sock) for accessing their parent tunnel. They have the .tunnel field in the l2tp_session structure for that. Furthermore, in all these cases, the session is registered, so we're guaranteed that .tunnel isn't NULL and that the session properly holds a reference on the tunnel. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11l2tp: remove .tunnel_sock from struct l2tp_ethGuillaume Nault1-2/+0
This field has never been used. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11l2tp: don't close sessions in l2tp_tunnel_destruct()Guillaume Nault1-2/+0
Sessions are already removed by the proto ->destroy() handlers, and since commit f3c66d4e144a ("l2tp: prevent creation of sessions on terminated tunnels"), we're guaranteed that no new session can be created afterwards. Furthermore, l2tp_tunnel_closeall() can sleep when there are sessions left to close. So we really shouldn't call it in a ->sk_destruct() handler, as it can be used from atomic context. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-30/+18
Simple cases of overlapping changes in the packet scheduler. Must easier to resolve this time. Which probably means that I screwed it up somehow. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05l2tp: don't use l2tp_tunnel_find() in l2tp_ip and l2tp_ip6Guillaume Nault2-30/+18
Using l2tp_tunnel_find() in l2tp_ip_recv() is wrong for two reasons: * It doesn't take a reference on the returned tunnel, which makes the call racy wrt. concurrent tunnel deletion. * The lookup is only based on the tunnel identifier, so it can return a tunnel that doesn't match the packet's addresses or protocol. For example, a packet sent to an L2TPv3 over IPv6 tunnel can be delivered to an L2TPv2 over UDPv4 tunnel. This is worse than a simple cross-talk: when delivering the packet to an L2TP over UDP tunnel, the corresponding socket is UDP, where ->sk_backlog_rcv() is NULL. Calling sk_receive_skb() will then crash the kernel by trying to execute this callback. And l2tp_tunnel_find() isn't even needed here. __l2tp_ip_bind_lookup() properly checks the socket binding and connection settings. It was used as a fallback mechanism for finding tunnels that didn't have their data path registered yet. But it's not limited to this case and can be used to replace l2tp_tunnel_find() in the general case. Fix l2tp_ip6 in the same way. Fixes: 0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+6
Smooth Cong Wang's bug fix into 'net-next'. Basically put the bulk of the tcf_block_put() logic from 'net' into tcf_block_put_ext(), but after the offload unbind. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01l2tp: remove field 'dev' from struct l2tp_ethGuillaume Nault1-5/+0
This field has never been used. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01l2tp: remove l2tp_tunnel_count and l2tp_session_countGuillaume Nault1-10/+0
These variables have never been used. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01l2tp: remove l2tp specific refcount debuggingGuillaume Nault1-22/+2
With conversion to refcount_t, such manual debugging code doesn't make sense anymore. The tunnel part was already dropped by 54652eb12c1b ("l2tp: hold tunnel while looking up sessions in l2tp_netlink"). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01l2tp: remove ->ref() and ->deref()Guillaume Nault7-79/+25
The ->ref() and ->deref() callbacks are unused since PPP stopped using them in ee40fb2e1eb5 ("l2tp: protect sock pointer of struct pppol2tp_session with RCU"). We can thus remove them from struct l2tp_session and drop the do_ref parameter of l2tp_session_get*(). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-31l2tp: hold tunnel in pppol2tp_connect()Guillaume Nault1-1/+6
Use l2tp_tunnel_get() in pppol2tp_connect() to ensure the tunnel isn't going to disappear while processing the rest of the function. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29l2tp: initialise PPP sessions before registering themGuillaume Nault1-31/+38
pppol2tp_connect() initialises L2TP sessions after they've been exposed to the rest of the system by l2tp_session_register(). This puts sessions into transient states that are the source of several races, in particular with session's deletion path. This patch centralises the initialisation code into pppol2tp_session_init(), which is called before the registration phase. The only field that can't be set before session registration is the pppol2tp socket pointer, which has already been converted to RCU. So pppol2tp_connect() should now be race-free. The session's .session_close() callback is now set before registration. Therefore, it's always called when l2tp_core deletes the session, even if it was created by pppol2tp_session_create() and hasn't been plugged to a pppol2tp socket yet. That'd prevent session free because the extra reference taken by pppol2tp_session_close() wouldn't be dropped by the socket's ->sk_destruct() callback (pppol2tp_session_destruct()). We could set .session_close() only while connecting a session to its pppol2tp socket, or teach pppol2tp_session_close() to avoid grabbing a reference when the session isn't connected, but that'd require adding some form of synchronisation to be race free. Instead of that, we can just let the pppol2tp socket hold a reference on the session as soon as it starts depending on it (that is, in pppol2tp_connect()). Then we don't need to utilise pppol2tp_session_close() to hold a reference at the last moment to prevent l2tp_core from dropping it. When releasing the socket, pppol2tp_release() now deletes the session using the standard l2tp_session_delete() function, instead of merely removing it from hash tables. l2tp_session_delete() drops the reference the sessions holds on itself, but also makes sure it doesn't remove a session twice. So it can safely be called, even if l2tp_core already tried, or is concurrently trying, to remove the session. Finally, pppol2tp_session_destruct() drops the reference held by the socket. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29l2tp: protect sock pointer of struct pppol2tp_session with RCUGuillaume Nault1-53/+101
pppol2tp_session_create() registers sessions that can't have their corresponding socket initialised. This socket has to be created by userspace, then connected to the session by pppol2tp_connect(). Therefore, we need to protect the pppol2tp socket pointer of L2TP sessions, so that it can safely be updated when userspace is connecting or closing the socket. This will eventually allow pppol2tp_connect() to avoid generating transient states while initialising its parts of the session. To this end, this patch protects the pppol2tp socket pointer using RCU. The pppol2tp socket pointer is still set in pppol2tp_connect(), but only once we know the function isn't going to fail. It's eventually reset by pppol2tp_release(), which now has to wait for a grace period to elapse before it can drop the last reference on the socket. This ensures that pppol2tp_session_get_sock() can safely grab a reference on the socket, even after ps->sk is reset to NULL but before this operation actually gets visible from pppol2tp_session_get_sock(). The rest is standard RCU conversion: pppol2tp_recv(), which already runs in atomic context, is simply enclosed by rcu_read_lock() and rcu_read_unlock(), while other functions are converted to use pppol2tp_session_get_sock() followed by sock_put(). pppol2tp_session_setsockopt() is a special case. It used to retrieve the pppol2tp socket from the L2TP session, which itself was retrieved from the pppol2tp socket. Therefore we can just avoid dereferencing ps->sk and directly use the original socket pointer instead. With all users of ps->sk now handling NULL and concurrent updates, the L2TP ->ref() and ->deref() callbacks aren't needed anymore. Therefore, rather than converting pppol2tp_session_sock_hold() and pppol2tp_session_sock_put(), we can just drop them. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29l2tp: initialise l2tp_eth sessions before registering themGuillaume Nault1-31/+75
Sessions must be initialised before being made externally visible by l2tp_session_register(). Otherwise the session may be concurrently deleted before being initialised, which can confuse the deletion path and eventually lead to kernel oops. Therefore, we need to move l2tp_session_register() down in l2tp_eth_create(), but also handle the intermediate step where only the session or the netdevice has been registered. We can't just call l2tp_session_register() in ->ndo_init() because we'd have no way to properly undo this operation in ->ndo_uninit(). Instead, let's register the session and the netdevice in two different steps and protect the session's device pointer with RCU. And now that we allow the session's .dev field to be NULL, we don't need to prevent the netdevice from being removed anymore. So we can drop the dev_hold() and dev_put() calls in l2tp_eth_create() and l2tp_eth_dev_uninit(). Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29l2tp: don't register sessions in l2tp_session_create()Guillaume Nault4-20/+36
Sessions created by l2tp_session_create() aren't fully initialised: some pseudo-wire specific operations need to be done before making the session usable. Therefore the PPP and Ethernet pseudo-wires continue working on the returned l2tp session while it's already been exposed to the rest of the system. This can lead to various issues. In particular, the session may enter the deletion process before having been fully initialised, which will confuse the session removal code. This patch moves session registration out of l2tp_session_create(), so that callers can control when the session is exposed to the rest of the system. This is done by the new l2tp_session_register() function. Only pppol2tp_session_create() can be easily converted to avoid modifying its session after registration (the debug message is dropped in order to avoid the need for holding a reference on the session). For pppol2tp_connect() and l2tp_eth_create()), more work is needed. That'll be done in followup patches. For now, let's just register the session right after its creation, like it was done before. The only difference is that we can easily take a reference on the session before registering it, so, at least, we're sure it's not going to be freed while we're working on it. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 23:58:35 +0000