| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Variable 'err' is set to -ENOMEM but this value is never read as it is
overwritten with a new value later on, hence the 'If statements' and
assignments are redundantand and can be removed.
Cleans up the following clang-analyzer warning:
net/ipv6/seg6.c:126:4: warning: Value stored to 'err' is never read
[clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch provides counters for SRv6 Behaviors as defined in [1],
section 6. For each SRv6 Behavior instance, counters defined in [1] are:
- the total number of packets that have been correctly processed;
- the total amount of traffic in bytes of all packets that have been
correctly processed;
In addition, this patch introduces a new counter that counts the number of
packets that have NOT been properly processed (i.e. errors) by an SRv6
Behavior instance.
Counters are not only interesting for network monitoring purposes (i.e.
counting the number of packets processed by a given behavior) but they also
provide a simple tool for checking whether a behavior instance is working
as we expect or not.
Counters can be useful for troubleshooting misconfigured SRv6 networks.
Indeed, an SRv6 Behavior can silently drop packets for very different
reasons (i.e. wrong SID configuration, interfaces set with SID addresses,
etc) without any notification/message to the user.
Due to the nature of SRv6 networks, diagnostic tools such as ping and
traceroute may be ineffective: paths used for reaching a given router can
be totally different from the ones followed by probe packets. In addition,
paths are often asymmetrical and this makes it even more difficult to keep
up with the journey of the packets and to understand which behaviors are
actually processing our traffic.
When counters are enabled on an SRv6 Behavior instance, it is possible to
verify if packets are actually processed by such behavior and what is the
outcome of the processing. Therefore, the counters for SRv6 Behaviors offer
an non-invasive observability point which can be leveraged for both traffic
monitoring and troubleshooting purposes.
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-counters
Troubleshooting using SRv6 Behavior counters
--------------------------------------------
Let's make a brief example to see how helpful counters can be for SRv6
networks. Let's consider a node where an SRv6 End Behavior receives an SRv6
packet whose Segment Left (SL) is equal to 0. In this case, the End
Behavior (which accepts only packets with SL >= 1) discards the packet and
increases the error counter.
This information can be leveraged by the network operator for
troubleshooting. Indeed, the error counter is telling the user that the
packet:
(i) arrived at the node;
(ii) the packet has been taken into account by the SRv6 End behavior;
(iii) but an error has occurred during the processing.
The error (iii) could be caused by different reasons, such as wrong route
settings on the node or due to an invalid SID List carried by the SRv6
packet. Anyway, the error counter is used to exclude that the packet did
not arrive at the node or it has not been processed by the behavior at
all.
Turning on/off counters for SRv6 Behaviors
------------------------------------------
Each SRv6 Behavior instance can be configured, at the time of its creation,
to make use of counters.
This is done through iproute2 which allows the user to create an SRv6
Behavior instance specifying the optional "count" attribute as shown in the
following example:
$ ip -6 route add 2001:db8::1 encap seg6local action End count dev eth0
per-behavior counters can be shown by adding "-s" to the iproute2 command
line, i.e.:
$ ip -s -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End packets 0 bytes 0 errors 0 dev eth0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Impact of counters for SRv6 Behaviors on performance
====================================================
To determine the performance impact due to the introduction of counters in
the SRv6 Behavior subsystem, we have carried out extensive tests.
We chose to test the throughput achieved by the SRv6 End.DX2 Behavior
because, among all the other behaviors implemented so far, it reaches the
highest throughput which is around 1.5 Mpps (per core at 2.4 GHz on a
Xeon(R) CPU E5-2630 v3) on kernel 5.12-rc2 using packets of size ~ 100
bytes.
Three different tests were conducted in order to evaluate the overall
throughput of the SRv6 End.DX2 Behavior in the following scenarios:
1) vanilla kernel (without the SRv6 Behavior counters patch) and a single
instance of an SRv6 End.DX2 Behavior;
2) patched kernel with SRv6 Behavior counters and a single instance of
an SRv6 End.DX2 Behavior with counters turned off;
3) patched kernel with SRv6 Behavior counters and a single instance of
SRv6 End.DX2 Behavior with counters turned on.
All tests were performed on a testbed deployed on the CloudLab facilities
[2], a flexible infrastructure dedicated to scientific research on the
future of Cloud Computing.
Results of tests are shown in the following table:
Scenario (1): average 1504764,81 pps (~1504,76 kpps); std. dev 3956,82 pps
Scenario (2): average 1501469,78 pps (~1501,47 kpps); std. dev 2979,85 pps
Scenario (3): average 1501315,13 pps (~1501,32 kpps); std. dev 2956,00 pps
As can be observed, throughputs achieved in scenarios (2),(3) did not
suffer any observable degradation compared to scenario (1).
Thanks to Jakub Kicinski and David Ahern for their valuable suggestions
and comments provided during the discussion of the proposed RFCs.
[2] https://www.cloudlab.us
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IPv6 Multicast Router Advertisements parsing has the following two
issues:
For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD
messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes,
assuming MLDv2 Reports with at least one multicast address entry).
When ipv6_mc_check_mld_msg() tries to parse an Multicast Router
Advertisement its MLD length check will fail - and it will wrongly
return -EINVAL, even if we have a valid MRD Advertisement. With the
returned -EINVAL the bridge code will assume a broken packet and will
wrongly discard it, potentially leading to multicast packet loss towards
multicast routers.
The second issue is the MRD header parsing in
br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header
immediately after the IPv6 header (IPv6 next header type). However
according to RFC4286, section 2 all MRD messages contain a Router Alert
option (just like MLD). So instead there is an IPv6 Hop-by-Hop option
for the Router Alert between the IPv6 and ICMPv6 header, again leading
to the bridge wrongly discarding Multicast Router Advertisements.
To fix these two issues, introduce a new return value -ENODATA to
ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop
option which is not an MLD but potentially an MRD packet. This also
simplifies further parsing in the bridge code, as ipv6_mc_check_mld()
already fully checks the ICMPv6 header and hop-by-hop option.
These issues were found and fixed with the help of the mrdisc tool
(https://github.com/troglobit/mrdisc).
Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The compat layer needs to parse untrusted input (the ruleset)
to translate it to a 64bit compatible format.
We had a number of bugs in this department in the past, so allow users
to turn this feature off.
Add CONFIG_NETFILTER_XTABLES_COMPAT kconfig knob and make it default to y
to keep existing behaviour.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Same patch as the ip_tables one: removal of all accesses to ip6_tables
xt_table pointers. After this patch the struct net xt_table anchors
can be removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This changes how ip(6)table nat passes the ruleset/table to the
evaluation loop.
At the moment, it will fetch the table from struct net.
This change stores the table in the hook_ops 'priv' argument
instead.
This requires to duplicate the hook_ops for each netns, so
they can store the (per-net) xt_table structure.
The dupliated nat hook_ops get stored in net_generic data area.
They are free'd in the namespace exit path.
This is a pre-requisite to remove the xt_table/ruleset pointers
from struct net.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
No need for these.
There is only one caller, the xtables core, when the table is registered
for the first time with a particular network namespace.
After ->table_init() call, the table is linked into the tables[af] list,
so next call to that function will skip the ->table_init().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Same as the previous patch, but for ip6tables.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Its the same function as ipt_unregister_table_exit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When I changed defrag hooks to no longer get registered by default I
intentionally made it so that registration can only be un-done by unloading
the nf_defrag_ipv4/6 module.
In hindsight this was too conservative; there is no reason to keep defrag
on while there is no feature dependency anymore.
Moreover, this won't work if user isn't allowed to remove nf_defrag module.
This adds the disable() functions for both ipv4 and ipv6 and calls them
from conntrack, TPROXY and the xtables socket module.
ipvs isn't converted here, it will behave as before this patch and
will need module removal.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add vlan match and pop actions to the flowtable offload,
patches from wenxu.
2) Reduce size of the netns_ct structure, which itself is
embedded in struct net Make netns_ct a read-mostly structure.
Patches from Florian Westphal.
3) Add FLOW_OFFLOAD_XMIT_UNSPEC to skip dst check from garbage
collector path, as required by the tc CT action. From Roi Dayan.
4) VLAN offload fixes for nftables: Allow for matching on both s-vlan
and c-vlan selectors. Fix match of VLAN id due to incorrect
byteorder. Add a new routine to properly populate flow dissector
ethertypes.
5) Missing keys in ip{6}_route_me_harder() results in incorrect
routes. This includes an update for selftest infra. Patches
from Ido Schimmel.
6) Add counter hardware offload support through FLOW_CLS_STATS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some prototypes are unnecessary, so delete it.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Netfilter tries to reroute mangled packets as a different route might
need to be used following the mangling. When this happens, netfilter
does not populate the IP protocol, the source port and the destination
port in the flow key. Therefore, FIB rules that match on these fields
are ignored and packets can be misrouted.
Solve this by dissecting the outer flow and populating the flow key
before rerouting the packet. Note that flow dissection only happens when
FIB rules that match on these fields are installed, so in the common
case there should not be a penalty.
Reported-by: Michal Soltys <msoltyspl@yandex.pl>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__ipv6_dev_mc_dec() internally uses sleepable functions so that caller
must not acquire atomic locks. But caller, which is addrconf_verify_rtnl()
acquires rcu_read_lock_bh().
So this warning occurs in the __ipv6_dev_mc_dec().
Test commands:
ip netns add A
ip link add veth0 type veth peer name veth1
ip link set veth1 netns A
ip link set veth0 up
ip netns exec A ip link set veth1 up
ip a a 2001:db8::1/64 dev veth0 valid_lft 2 preferred_lft 1
Splat looks like:
============================
WARNING: suspicious RCU usage
5.12.0-rc6+ #515 Not tainted
-----------------------------
kernel/sched/core.c:8294 Illegal context switch in RCU-bh read-side
critical section!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
4 locks held by kworker/4:0/1997:
#0: ffff88810bd72d48 ((wq_completion)ipv6_addrconf){+.+.}-{0:0}, at:
process_one_work+0x761/0x1440
#1: ffff888105c8fe00 ((addr_chk_work).work){+.+.}-{0:0}, at:
process_one_work+0x795/0x1440
#2: ffffffffb9279fb0 (rtnl_mutex){+.+.}-{3:3}, at:
addrconf_verify_work+0xa/0x20
#3: ffffffffb8e30860 (rcu_read_lock_bh){....}-{1:2}, at:
addrconf_verify_rtnl+0x23/0xc60
stack backtrace:
CPU: 4 PID: 1997 Comm: kworker/4:0 Not tainted 5.12.0-rc6+ #515
Workqueue: ipv6_addrconf addrconf_verify_work
Call Trace:
dump_stack+0xa4/0xe5
___might_sleep+0x27d/0x2b0
__mutex_lock+0xc8/0x13f0
? lock_downgrade+0x690/0x690
? __ipv6_dev_mc_dec+0x49/0x2a0
? mark_held_locks+0xb7/0x120
? mutex_lock_io_nested+0x1270/0x1270
? lockdep_hardirqs_on_prepare+0x12c/0x3e0
? _raw_spin_unlock_irqrestore+0x47/0x50
? trace_hardirqs_on+0x41/0x120
? __wake_up_common_lock+0xc9/0x100
? __wake_up_common+0x620/0x620
? memset+0x1f/0x40
? netlink_broadcast_filtered+0x2c4/0xa70
? __ipv6_dev_mc_dec+0x49/0x2a0
__ipv6_dev_mc_dec+0x49/0x2a0
? netlink_broadcast_filtered+0x2f6/0xa70
addrconf_leave_solict.part.64+0xad/0xf0
? addrconf_join_solict.part.63+0xf0/0xf0
? nlmsg_notify+0x63/0x1b0
__ipv6_ifa_notify+0x22c/0x9c0
? inet6_fill_ifaddr+0xbe0/0xbe0
? lockdep_hardirqs_on_prepare+0x12c/0x3e0
? __local_bh_enable_ip+0xa5/0xf0
? ipv6_del_addr+0x347/0x870
ipv6_del_addr+0x3b1/0x870
? addrconf_ifdown+0xfe0/0xfe0
? rcu_read_lock_any_held.part.27+0x20/0x20
addrconf_verify_rtnl+0x8a9/0xc60
addrconf_verify_work+0xf/0x20
process_one_work+0x84c/0x1440
In order to avoid this problem, it uses rcu_read_unlock_bh() for
a short time. RCU is used for avoiding freeing
ifp(struct *inet6_ifaddr) while ifp is being used. But this will
not be released even if rcu_read_unlock_bh() is used.
Because before rcu_read_unlock_bh(), it uses in6_ifa_hold(ifp).
So this is safe.
Fixes: 63ed8de4be81 ("mld: add mc_lock for protecting per-interface mld data")
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-04-14
Not much this time:
1) Simplification of some variable calculations in esp4 and esp6.
From Jiapeng Chong and Junlin Yang.
2) Fix a clang Wformat warning in esp6 and ah6.
From Arnd Bergmann.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current icmp_rcv function drops all unknown ICMP types, including
ICMP_EXT_ECHOREPLY (type 43). In order to parse Extended Echo Reply messages, we have
to pass these packets to the ping_rcv function, which does not do any
other filtering and passes the packet to the designated socket.
Pass incoming RFC 8335 ICMP Extended Echo Reply packets to the ping_rcv
handler instead of discarding the packet.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similarly to the sit case, we need to remove the tunnels with no
addresses that have been moved to another network namespace.
Fixes: 0bd8762824e73 ("ip6tnl: add x-netns support")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A sit interface created without a local or a remote address is linked
into the `sit_net::tunnels_wc` list of its original namespace. When
deleting a network namespace, delete the devices that have been moved.
The following script triggers a null pointer dereference if devices
linked in a deleted `sit_net` remain:
for i in `seq 1 30`; do
ip netns add ns-test
ip netns exec ns-test ip link add dev veth0 type veth peer veth1
ip netns exec ns-test ip link add dev sit$i type sit dev veth0
ip netns exec ns-test ip link set dev sit$i netns $$
ip netns del ns-test
done
for i in `seq 1 30`; do
ip link del dev sit$i
done
Fixes: 5e6700b3bf98f ("sit: add support of x-netns")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix NAT IPv6 offload in the flowtable.
2) icmpv6 is printed as unknown in /proc/net/nf_conntrack.
3) Use div64_u64() in nft_limit, from Eric Dumazet.
4) Use pre_exit to unregister ebtables and arptables hooks,
from Florian Westphal.
5) Fix out-of-bound memset in x_tables compat match/target,
also from Florian.
6) Clone set elements expression to ensure proper initialization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xt_compat_match/target_from_user doesn't check that zeroing the area
to start of next rule won't write past end of allocated ruleset blob.
Remove this code and zero the entire blob beforehand.
Reported-by: syzbot+cfc0247ac173f597aaaa@syzkaller.appspotmail.com
Reported-by: Andy Nguyen <theflow@google.com>
Fixes: 9fa492cdc160c ("[NETFILTER]: x_tables: simplify compat API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There is a comment spelling mistake "interfarence" -> "interference" in
function parse_nla_action(). Fix it.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nlh is being checked for validtity two times when it is dereferenced in
this function. Check for validity again when updating the flags through
nlh pointer to make the dereferencing safe.
CC: <stable@vger.kernel.org>
Addresses-Coverity: ("NULL pointer dereference")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Setting iftoken can fail for several different reasons but there
and there was no report to user as to the cause. Add netlink
extended errors to the processing of the request.
This requires adding additional argument through rtnl_af_ops
set_link_af callback.
Reported-by: Hongren Zheng <li@zenithal.me>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter/IPVS updates for your net-next tree:
1) Simplify log infrastructure modularity: Merge ipv4, ipv6, bridge,
netdev and ARP families to nf_log_syslog.c. Add module softdeps.
This fixes a rare deadlock condition that might occur when log
module autoload is required. From Florian Westphal.
2) Moves part of netfilter related pernet data from struct net to
net_generic() infrastructure. All of these users can be modules,
so if they are not loaded there is no need to waste space. Size
reduction is 7 cachelines on x86_64, also from Florian.
2) Update nftables audit support to report events once per table,
to get it aligned with iptables. From Richard Guy Briggs.
3) Check for stale routes from the flowtable garbage collector path.
This is fixing IPv6 which breaks due missing check for the dst_cookie.
4) Add a nfnl_fill_hdr() function to simplify netlink + nfnetlink
headers setup.
5) Remove documentation on several statified functions.
6) Remove printk on netns creation for the FTP IPVS tracker,
from Florian Westphal.
7) Remove unnecessary nf_tables_destroy_list_lock spinlock
initialization, from Yang Yingliang.
7) Remove a duplicated forward declaration in ipset,
from Wan Jiabing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows followup patch to remove these members from struct net.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Found by virtue of ipv6 raw sockets not honouring the per-socket
IP{,V6}_FREEBIND setting.
Based on hits found via:
git grep '[.]ip_nonlocal_bind'
We fix both raw ipv6 sockets to honour IP{,V6}_FREEBIND and IP{,V6}_TRANSPARENT,
and we fix sctp sockets to honour IP{,V6}_TRANSPARENT (they already honoured
FREEBIND), and not just the ipv6 'ip_nonlocal_bind' sysctl.
The helper is defined as:
static inline bool ipv6_can_nonlocal_bind(struct net *net, struct inet_sock *inet) {
return net->ipv6.sysctl.ip_nonlocal_bind || inet->freebind || inet->transparent;
}
so this change only widens the accepted opt-outs and is thus a clean bugfix.
I'm not entirely sure what 'fixes' tag to add, since this is AFAICT an ancient bug,
but IMHO this should be applied to stable kernels as far back as possible.
As such I'm adding a 'fixes' tag with the commit that originally added the helper,
which happened in 4.19. Backporting to older LTS kernels (at least 4.9 and 4.14)
would presumably require open-coding it or backporting the helper as well.
Other possibly relevant commits:
v4.18-rc6-1502-g83ba4645152d net: add helpers checking if socket can be bound to nonlocal address
v4.18-rc6-1431-gd0c1f01138c4 net/ipv6: allow any source address for sendmsg pktinfo with ip_nonlocal_bind
v4.14-rc5-271-gb71d21c274ef sctp: full support for ipv6 ip_nonlocal_bind & IP_FREEBIND
v4.7-rc7-1883-g9b9742022888 sctp: support ipv6 nonlocal bind
v4.1-12247-g35a256fee52c ipv6: Nonlocal bind
Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 83ba4645152d ("net: add helpers checking if socket can be bound to nonlocal address")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct ip6_sf_socklist and ipv6_mc_socklist are per-socket MLD data.
These data are protected by rtnl lock, socket lock, and RCU.
So, when these are used, it verifies whether rtnl lock is acquired or not.
ip6_mc_msfget() is called by do_ipv6_getsockopt().
But caller doesn't acquire rtnl lock.
So, when these data are used in the ip6_mc_msfget() lockdep warns about it.
But accessing these is actually safe because socket lock was acquired by
do_ipv6_getsockopt().
So, it changes lockdep annotation from rtnl lock to socket lock.
(rtnl_dereference -> sock_dereference)
Locking graph for mld data is like below:
When writing mld data:
do_ipv6_setsockopt()
rtnl_lock
lock_sock
(mld functions)
idev->mc_lock(if per-interface mld data is modified)
When reading mld data:
do_ipv6_getsockopt()
lock_sock
ip6_mc_msfget()
Splat looks like:
=============================
WARNING: suspicious RCU usage
5.12.0-rc4+ #503 Not tainted
-----------------------------
net/ipv6/mcast.c:610 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by mcast-listener-/923:
#0: ffff888007958a70 (sk_lock-AF_INET6){+.+.}-{0:0}, at:
ipv6_get_msfilter+0xaf/0x190
stack backtrace:
CPU: 1 PID: 923 Comm: mcast-listener- Not tainted 5.12.0-rc4+ #503
Call Trace:
dump_stack+0xa4/0xe5
ip6_mc_msfget+0x553/0x6c0
? ipv6_sock_mc_join_ssm+0x10/0x10
? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
? mark_held_locks+0xb7/0x120
? lockdep_hardirqs_on_prepare+0x27c/0x3e0
? __local_bh_enable_ip+0xa5/0xf0
? lock_sock_nested+0x82/0xf0
ipv6_get_msfilter+0xc3/0x190
? compat_ipv6_get_msfilter+0x300/0x300
? lock_downgrade+0x690/0x690
do_ipv6_getsockopt.isra.6.constprop.13+0x1809/0x29e0
? do_ipv6_mcast_group_source+0x150/0x150
? register_lock_class+0x1750/0x1750
? kvm_sched_clock_read+0x14/0x30
? sched_clock+0x5/0x10
? sched_clock_cpu+0x18/0x170
? find_held_lock+0x3a/0x1c0
? lock_downgrade+0x690/0x690
? ipv6_getsockopt+0xdb/0x1b0
ipv6_getsockopt+0xdb/0x1b0
[ ... ]
Fixes: 88e2ca308094 ("mld: convert ifmcaddr6 to RCU")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MPTCP reset option allows to carry a mptcp-specific error code that
provides more information on the nature of a connection reset.
Reset option data received gets stored in the subflow context so it can
be sent to userspace via the 'subflow closed' netlink event.
When a subflow is closed, the desired error code that should be sent to
the peer is also placed in the subflow context structure.
If a reset is sent before subflow establishment could complete, e.g. on
HMAC failure during an MP_JOIN operation, the mptcp skb extension is
used to store the reset information.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-01
The following pull-request contains BPF updates for your *net-next* tree.
We've added 68 non-merge commits during the last 7 day(s) which contain
a total of 70 files changed, 2944 insertions(+), 1139 deletions(-).
The main changes are:
1) UDP support for sockmap, from Cong.
2) Verifier merge conflict resolution fix, from Daniel.
3) xsk selftests enhancements, from Maciej.
4) Unstable helpers aka kernel func calling, from Martin.
5) Batches ops for LPM map, from Pedro.
6) Fix race in bpf_get_local_storage, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The logic in rt6_age_examine_exception is confusing. The commit is
to refactor the code.
Signed-off-by: Xu Jia <xujia39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is similar to tcp_read_sock(), except we do not need
to worry about connections, we just need to retrieve skb
from UDP receive queue.
Note, the return value of ->read_sock() is unused in
sk_psock_verdict_data_ready(), and UDP still does not
support splice() due to lack of ->splice_read(), so users
can not reach udp_read_sock() directly.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-12-xiyou.wangcong@gmail.com
|
|
Currently sockmap calls into each protocol to update the struct
proto and replace it. This certainly won't work when the protocol
is implemented as a module, for example, AF_UNIX.
Introduce a new ops sk->sk_prot->psock_update_sk_prot(), so each
protocol can implement its own way to replace the struct proto.
This also helps get rid of symbol dependencies on CONFIG_INET.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331023237.41094-11-xiyou.wangcong@gmail.com
|
|
My previous commits added a dev_hold() in tunnels ndo_init(),
but forgot to remove it from special functions setting up fallback tunnels.
Fallback tunnels do call their respective ndo_init()
This leads to various reports like :
unregister_netdevice: waiting for ip6gre0 to become free. Usage count = 2
Fixes: 48bb5697269a ("ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 40cb881b5aaa ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert most sysctls that can fit in a byte.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-03-31
1) Fix ipv4 pmtu checks for xfrm anf vti interfaces.
From Eyal Birger.
2) There are situations where the socket passed to
xfrm_output_resume() is not the same as the one
attached to the skb. Use the socket passed to
xfrm_output_resume() to avoid lookup failures
when xfrm is used with VRFs.
From Evan Nimmo.
3) Make the xfrm_state_hash_generation sequence counter per
network namespace because but its write serialization
lock is also per network namespace. Write protection
is insufficient otherwise.
From Ahmed S. Darwish.
4) Fixup sctp featue flags when used with esp offload.
From Xin Long.
5) xfrm BEET mode doesn't support fragments for inner packets.
This is a limitation of the protocol, so no fix possible.
Warn at least to notify the user about that situation.
From Xin Long.
6) Fix NULL pointer dereference on policy lookup when
namespaces are uses in combination with esp offload.
7) Fix incorrect transformation on esp offload when
packets get segmented at layer 3.
8) Fix some user triggered usages of WARN_ONCE in
the xfrm compat layer.
From Dmitry Safonov.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Same reasons than for the previous commits :
6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init methods")
40cb881b5aaa ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods")
7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
[1]
WARNING: CPU: 1 PID: 21059 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 1 PID: 21059 Comm: syz-executor.4 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc900025aefe8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520004b5def
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff888023488568
R13: ffff8880254e9000 R14: 00000000dfd82cfd R15: ffff88802ee2d7c0
FS: 00007f13bc590700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0943e74000 CR3: 0000000025273000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
ip6_tnl_dev_uninit+0x370/0x3d0 net/ipv6/ip6_tunnel.c:387
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
ip6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_tunnel.c:263
ip6_tnl_newlink+0x312/0x580 net/ipv6/ip6_tunnel.c:2052
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 919067cc845f ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the previous patch, the stack can do L4 UDP aggregation
on top of a UDP tunnel.
In such scenario, udp{4,6}_gro_complete will be called twice. This function
will enter its is_flist branch immediately, even though that is only
correct on the second call, as GSO_FRAGLIST is only relevant for the
inner packet.
Instead, we need to try first UDP tunnel-based aggregation, if the GRO
packet requires that.
This patch changes udp{4,6}_gro_complete to skip the frag list processing
when while encap_mark == 1, identifying processing of the outer tunnel
header.
Additionally, clears the field in udp_gro_complete() so that we can enter
the frag list path on the next round, for the inner header.
v1 -> v2:
- hopefully clarified the commit message
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When UDP packets generated locally by a socket with UDP_SEGMENT
traverse the following path:
UDP tunnel(xmit) -> veth (segmentation) -> veth (gro) ->
UDP tunnel (rx) -> UDP socket (no UDP_GRO)
ip_summed will be set to CHECKSUM_PARTIAL at creation time and
such checksum mode will be preserved in the above path up to the
UDP tunnel receive code where we have:
__iptunnel_pull_header() -> skb_pull_rcsum() ->
skb_postpull_rcsum() -> __skb_postpull_rcsum()
The latter will convert the skb to CHECKSUM_NONE.
The UDP GSO packet will be later segmented as part of the rx socket
receive operation, and will present a CHECKSUM_NONE after segmentation.
Additionally the segmented packets UDP CB still refers to the original
GSO packet len. Overall that causes unexpected/wrong csum validation
errors later in the UDP receive path.
We could possibly address the issue with some additional checks and
csum mangling in the UDP tunnel code. Since the issue affects only
this UDP receive slow path, let's set a suitable csum status there.
Note that SKB_GSO_UDP_L4 or SKB_GSO_FRAGLIST packets lacking an UDP
encapsulation present a valid checksum when landing to udp_queue_rcv_skb(),
as the UDP checksum has been validated by the GRO engine.
v2 -> v3:
- even more verbose commit message and comments
v1 -> v2:
- restrict the csum update to the packets strictly needing them
- hopefully clarify the commit message and code comments
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This removes the nf_log_ipv6 module, the functionality is now
provided by nf_log_syslog.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add ipv6_dev_find to ipv6_stub to allow lookup of net_devices by IPV6
address in net/ipv4/icmp.c.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
Fixes: 919067cc845f ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
Therefore, we need to move dev_hold() call from
vti6_tnl_create2() to vti6_dev_init_gen()
[1]
WARNING: CPU: 0 PID: 15951 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 15951 Comm: syz-executor.3 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc90001eaef28 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520003d5dd7
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff88801bb1c568
R13: ffff88801f69e800 R14: 00000000ffffffff R15: ffff888050889d40
FS: 00007fc79314e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1c1ff47108 CR3: 0000000020fd5000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
vti6_dev_uninit+0x31a/0x360 net/ipv6/ip6_vti.c:297
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
vti6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_vti.c:190
vti6_newlink+0x9d/0xd0 net/ipv6/ip6_vti.c:1020
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x331/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmmsg+0x195/0x470 net/socket.c:2490
__do_sys_sendmmsg net/socket.c:2519 [inline]
__se_sys_sendmmsg net/socket.c:2516 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2516
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding dev_hold(),
and vice versa.
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
ip6_gre for example (among others problematic drivers)
has to use dev_hold() in ip6gre_tunnel_init_common()
instead of from ip6gre_newlink_common(), covering
both ip6gre_tunnel_init() and ip6gre_tap_init()/
Note that ip6gre_tunnel_init_common() is not called from
ip6erspan_tap_init() thus we also need to add a dev_hold() there,
as ip6erspan_tunnel_uninit() does call dev_put()
[1]
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 8422 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 1 PID: 8422 Comm: syz-executor854 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc900018befd0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88801ef19c40 RSI: ffffffff815c51f5 RDI: fffff52000317dec
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff888018cf4568
R13: ffff888018cf4c00 R14: ffff8880228f2000 R15: ffffffff8d659b80
FS: 00000000014eb300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d7bf2b3138 CR3: 0000000014933000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
ip6gre_tunnel_uninit+0x3d7/0x440 net/ipv6/ip6_gre.c:420
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
ip6gre_newlink_common.constprop.0+0x158/0x410 net/ipv6/ip6_gre.c:1984
ip6gre_newlink+0x275/0x7a0 net/ipv6/ip6_gre.c:2017
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
Fixes: 919067cc845f ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 94579ac3f6d0 ("xfrm: Fix double ESP trailer insertion in IPsec
crypto offload.") added a XFRM_XMIT flag to avoid duplicate ESP trailer
insertion on HW offload. This flag is set on the secpath that is shared
amongst segments. This lead to a situation where some segments are
not transformed correctly when segmentation happens at layer 3.
Fix this by using private skb extensions for segmented and hw offloaded
ESP packets.
Fixes: 94579ac3f6d0 ("xfrm: Fix double ESP trailer insertion in IPsec crypto offload.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Opportunity for min()
Generated by: scripts/coccinelle/misc/minmax.cocci
CC: Denis Efremov <efremov@linux.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
comments
Fix the following W=1 kernel build warning(s):
net/ipv6/ip6_tunnel.c:401: warning: expecting prototype for parse_tvl_tnl_enc_lim(). Prototype was for ip6_tnl_parse_tlv_enc_lim() instead
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
s/notfication/notification/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
s/Identifers/Identifiers/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
