summaryrefslogtreecommitdiffstats
path: root/net/ipv6
AgeCommit message (Collapse)AuthorFilesLines
2020-03-31net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inlineGustavo A. R. Silva1-1/+3
In case memory resources for buf were allocated, release them before return. Addresses-Coverity-ID: 1492011 ("Resource leak") Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2-4/+8
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: Track socket refcounts in skb_steal_sock()Joe Stringer1-3/+6
Refactor the UDP/TCP handlers slightly to allow skb_steal_sock() to make the determination of whether the socket is reference counted in the case where it is prefetched by earlier logic such as early_demux. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200329225342.16317-3-joe@wand.net.nz
2020-03-30bpf: Add socket assign supportJoe Stringer1-1/+2
Add support for TPROXY via a new bpf helper, bpf_sk_assign(). This helper requires the BPF program to discover the socket via a call to bpf_sk*_lookup_*(), then pass this socket to the new helper. The helper takes its own reference to the socket in addition to any existing reference that may or may not currently be obtained for the duration of BPF processing. For the destination socket to receive the traffic, the traffic must be routed towards that socket via local route. The simplest example route is below, but in practice you may want to route traffic more narrowly (eg by CIDR): $ ip route add local default dev lo This patch avoids trying to introduce an extra bit into the skb->sk, as that would require more invasive changes to all code interacting with the socket to ensure that the bit is handled correctly, such as all error-handling cases along the path from the helper in BPF through to the orphan path in the input. Instead, we opt to use the destructor variable to switch on the prefetch of the socket. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200329225342.16317-2-joe@wand.net.nz
2020-03-30Merge branch 'master' of ↵David S. Miller2-16/+36
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2020-03-28 1) Use kmem_cache_zalloc() instead of kmem_cache_alloc() in xfrm_state_alloc(). From Huang Zijiang. 2) esp_output_fill_trailer() is the same in IPv4 and IPv6, so share this function to avoide code duplcation. From Raed Salem. 3) Add offload support for esp beet mode. From Xin Long. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29net: ipv6: add rpl sr tunnelAlexander Aring4-0/+398
This patch adds functionality to configure routes for RPL source routing functionality. There is no IPIP functionality yet implemented which can be added later when the cases when to use IPv6 encapuslation comes more clear. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29net: add net available in build_stateAlexander Aring4-5/+6
The build_state callback of lwtunnel doesn't contain the net namespace structure yet. This patch will add it so we can check on specific address configuration at creation time of rpl source routes. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29net: ipv6: add support for rpl sr exthdrAlexander Aring4-3/+333
This patch adds rpl source routing receive handling. Everything works only if sysconf "rpl_seg_enabled" and source routing is enabled. Mostly the same behaviour as IPv6 segmentation routing. To handle compression and uncompression a rpl.c file is created which contains the necessary functionality. The receive handling will also care about IPv6 encapsulated so far it's specified as possible nexthdr in RFC 6554. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29addrconf: add functionality to check on rpl requirementsAlexander Aring1-0/+53
This patch adds a functionality to addrconf to check on a specific RPL address configuration. According to RFC 6554: To detect loops in the SRH, a router MUST determine if the SRH includes multiple addresses assigned to any interface on that router. If such addresses appear more than once and are separated by at least one address not assigned to that router. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-9/+27
Minor comment conflict in mac80211. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27Merge branch 'master' of ↵David S. Miller2-9/+27
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2020-03-27 1) Handle NETDEV_UNREGISTER for xfrm device to handle asynchronous unregister events cleanly. From Raed Salem. 2) Fix vti6 tunnel inter address family TX through bpf_redirect(). From Nicolas Dichtel. 3) Fix lenght check in verify_sec_ctx_len() to avoid a slab-out-of-bounds. From Xin Long. 4) Add a missing verify_sec_ctx_len check in xfrm_add_acquire to avoid a possible out-of-bounds to access. From Xin Long. 5) Use built-in RCU list checking of hlist_for_each_entry_rcu to silence false lockdep warning in __xfrm6_tunnel_spi_lookup when CONFIG_PROVE_RCU_LIST is enabled. From Madhuparna Bhowmik. 6) Fix a panic on esp offload when crypto is done asynchronously. From Xin Long. 7) Fix a skb memory leak in an error path of vti6_rcv. From Torsten Hilbrich. 8) Fix a race that can lead to a doulbe free in xfrm_policy_timer. From Xin Long. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26ipv6: ndisc: add support for 'PREF64' dns64 prefix identifierMaciej Żenczykowski1-0/+1
This is trivial since we already have support for the entirely identical (from the kernel's point of view) RDNSS, DNSSL, etc. that also contain opaque data that needs to be passed down to userspace for further processing. As specified in draft-ietf-6man-ra-pref64-09 (while it is still a draft, it is purely waiting on the RFC Editor for cleanups and publishing): PREF64 option contains lifetime and a (up to) 96-bit IPv6 prefix. The 8-bit identifier of the option type as assigned by the IANA is 38. Since we lack DNS64/NAT64/CLAT support in kernel at the moment, thus this option should also be passed on to userland. See: https://tools.ietf.org/html/draft-ietf-6man-ra-pref64-09 https://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml#icmpv6-parameters-5 Cc: Erik Kline <ek@google.com> Cc: Jen Linkova <furry@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Michael Haro <mharo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-By: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26esp6: add gso_segment for esp6 beet modeXin Long1-0/+36
Similar to xfrm6_tunnel/transport_gso_segment(), _gso_segment() is added to do gso_segment for esp6 beet mode. Before calling inet6_offloads[proto]->callbacks.gso_segment, it needs to do: - Get the upper proto from ph header to get its gso_segment when xo->proto is IPPROTO_BEETPH. - Add SKB_GSO_TCPV6 to gso_type if x->sel.family != AF_INET6 and the proto == IPPROTO_TCP, so that the current tcp ipv6 packet can be segmented. - Calculate a right value for skb->transport_header and move skb->data to the transport header position. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-03-23Remove DST_HOSTDavid Laight1-6/+0
Previous changes to the IP routing code have removed all the tests for the DS_HOST route flag. Remove the flags and all the code that sets it. Signed-off-by: David Laight <david.laight@aculab.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16vti6: Fix memory leak of skb if input policy check failsTorsten Hilbrich1-1/+1
The vti6_rcv function performs some tests on the retrieved tunnel including checking the IP protocol, the XFRM input policy, the source and destination address. In all but one places the skb is released in the error case. When the input policy check fails the network packet is leaked. Using the same goto-label discard in this case to fix this problem. Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces") Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-03-15netfilter: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-2/+2
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] Lastly, fix checkpatch.pl warning WARNING: __aligned(size) is preferred over __attribute__((aligned(size))) in net/bridge/netfilter/ebtables.c This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-13/+42
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12inet: Use fallthrough;Joe Perches11-20/+18
Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/ And by hand: net/ipv6/ip6_fib.c has a fallthrough comment outside of an #ifdef block that causes gcc to emit a warning if converted in-place. So move the new fallthrough; inside the containing #ifdef/#endif too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol numberPaolo Lungaroni2-2/+2
The Internet Assigned Numbers Authority (IANA) has recently assigned a protocol number value of 143 for Ethernet [1]. Before this assignment, encapsulation mechanisms such as Segment Routing used the IPv6-NoNxt protocol number (59) to indicate that the encapsulated payload is an Ethernet frame. In this patch, we add the definition of the Ethernet protocol number to the kernel headers and update the SRv6 L2 tunnels to use it. [1] https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it> Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it> Acked-by: Ahmed Abdelsalam <ahmed.abdelsalam@gssi.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10ipv6/addrconf: call ipv6_mc_up() for non-Ethernet interfaceHangbin Liu1-0/+4
Rafał found an issue that for non-Ethernet interface, if we down and up frequently, the memory will be consumed slowly. The reason is we add allnodes/allrouters addressed in multicast list in ipv6_add_dev(). When link down, we call ipv6_mc_down(), store all multicast addresses via mld_add_delrec(). But when link up, we don't call ipv6_mc_up() for non-Ethernet interface to remove the addresses. This makes idev->mc_tomb getting bigger and bigger. The call stack looks like: addrconf_notify(NETDEV_REGISTER) ipv6_add_dev ipv6_dev_mc_inc(ff01::1) ipv6_dev_mc_inc(ff02::1) ipv6_dev_mc_inc(ff02::2) addrconf_notify(NETDEV_UP) addrconf_dev_config /* Alas, we support only Ethernet autoconfiguration. */ return; addrconf_notify(NETDEV_DOWN) addrconf_ifdown ipv6_mc_down igmp6_group_dropped(ff02::2) mld_add_delrec(ff02::2) igmp6_group_dropped(ff02::1) igmp6_group_dropped(ff01::1) After investigating, I can't found a rule to disable multicast on non-Ethernet interface. In RFC2460, the link could be Ethernet, PPP, ATM, tunnels, etc. In IPv4, it doesn't check the dev type when calls ip_mc_up() in inetdev_event(). Even for IPv6, we don't check the dev type and call ipv6_add_dev(), ipv6_dev_mc_inc() after register device. So I think it's OK to fix this memory consumer by calling ipv6_mc_up() for non-Ethernet interface. v2: Also check IFF_MULTICAST flag to make sure the interface supports multicast Reported-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Rafał Miłecki <zajec5@gmail.com> Fixes: 74235a25c673 ("[IPV6] addrconf: Fix IPv6 on tuntap tunnels") Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03ipv6: Use math to point per net sysctls into the appropriate struct netCambda Zhu1-17/+4
The data pointers of ipv6 sysctl are set one by one which is hard to maintain, especially with kconfig. This patch simplifies it by using math to point the per net sysctls into the appropriate struct net, just like what we did for ipv4. Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/ipv6: remove the old peer route if change it to a new oneHangbin Liu1-4/+17
When we modify the peer route and changed it to a new one, we should remove the old route first. Before the fix: + ip addr add dev dummy1 2001:db8::1 peer 2001:db8::2 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 256 pref medium 2001:db8::2 proto kernel metric 256 pref medium + ip addr change dev dummy1 2001:db8::1 peer 2001:db8::3 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 256 pref medium 2001:db8::2 proto kernel metric 256 pref medium After the fix: + ip addr change dev dummy1 2001:db8::1 peer 2001:db8::3 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 256 pref medium 2001:db8::3 proto kernel metric 256 pref medium This patch depend on the previous patch "net/ipv6: need update peer route when modify metric" to update new peer route after delete old one. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/ipv6: need update peer route when modify metricHangbin Liu1-4/+16
When we modify the route metric, the peer address's route need also be updated. Before the fix: + ip addr add dev dummy1 2001:db8::1 peer 2001:db8::2 metric 60 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 60 pref medium 2001:db8::2 proto kernel metric 60 pref medium + ip addr change dev dummy1 2001:db8::1 peer 2001:db8::2 metric 61 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 61 pref medium 2001:db8::2 proto kernel metric 60 pref medium After the fix: + ip addr change dev dummy1 2001:db8::1 peer 2001:db8::2 metric 61 + ip -6 route show dev dummy1 2001:db8::1 proto kernel metric 61 pref medium 2001:db8::2 proto kernel metric 61 pref medium Fixes: 8308f3ff1753 ("net/ipv6: Add support for specifying metric of connected routes") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29net/ipv6: use configured metric when add peer routeHangbin Liu1-3/+3
When we add peer address with metric configured, IPv4 could set the dest metric correctly, but IPv6 do not. e.g. ]# ip addr add 192.0.2.1 peer 192.0.2.2/32 dev eth1 metric 20 ]# ip route show dev eth1 192.0.2.2 proto kernel scope link src 192.0.2.1 metric 20 ]# ip addr add 2001:db8::1 peer 2001:db8::2/128 dev eth1 metric 20 ]# ip -6 route show dev eth1 2001:db8::1 proto kernel metric 20 pref medium 2001:db8::2 proto kernel metric 256 pref medium Fix this by using configured metric instead of default one. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 8308f3ff1753 ("net/ipv6: Add support for specifying metric of connected routes") Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-28ipv6: Replace zero-length array with flexible-array memberGustavo A. R. Silva2-2/+2
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+8
The mptcp conflict was overlapping additions. The SMC conflict was an additional and removal happening at the same time. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27ipv6: xfrm6_tunnel.c: Use built-in RCU list checkingMadhuparna Bhowmik1-1/+1
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-02-26ipv6: restrict IPV6_ADDRFORM operationEric Dumazet1-2/+8
IPV6_ADDRFORM is able to transform IPv6 socket to IPv4 one. While this operation sounds illogical, we have to support it. One of the things it does for TCP socket is to switch sk->sk_prot to tcp_prot. We now have other layers playing with sk->sk_prot, so we should make sure to not interfere with them. This patch makes sure sk_prot is the default pointer for TCP IPv6 socket. syzbot reported : BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD a0113067 P4D a0113067 PUD a8771067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 0 PID: 10686 Comm: syz-executor.0 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246 RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40 RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5 R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098 R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000 FS: 00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: inet_release+0x165/0x1c0 net/ipv4/af_inet.c:427 __sock_release net/socket.c:605 [inline] sock_close+0xe1/0x260 net/socket.c:1283 __fput+0x2e4/0x740 fs/file_table.c:280 ____fput+0x15/0x20 fs/file_table.c:313 task_work_run+0x176/0x1b0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop arch/x86/entry/common.c:164 [inline] prepare_exit_to_usermode+0x480/0x5b0 arch/x86/entry/common.c:195 syscall_return_slowpath+0x113/0x4a0 arch/x86/entry/common.c:278 do_syscall_64+0x11f/0x1c0 arch/x86/entry/common.c:304 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45c429 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2ae75dac78 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: 0000000000000000 RBX: 00007f2ae75db6d4 RCX: 000000000045c429 RDX: 0000000000000001 RSI: 000000000000011a RDI: 0000000000000004 RBP: 000000000076bf20 R08: 0000000000000038 R09: 0000000000000000 R10: 0000000020000180 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000a9d R14: 00000000004ccfb4 R15: 000000000076bf2c Modules linked in: CR2: 0000000000000000 ---[ end trace 82567b5207e87bae ]--- RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246 RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40 RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5 R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098 R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000 FS: 00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+1938db17e275e85dc328@syzkaller.appspotmail.com Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24net: UDP tunnel encapsulation module for tunnelling different protocols like ↵Martin Varghese1-0/+70
MPLS, IP, NSH etc. The Bareudp tunnel module provides a generic L3 encapsulation tunnelling module for tunnelling different protocols like MPLS, IP,NSH etc inside a UDP tunnel. Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24ip6mr: Fix RCU list debugging warningAmol Grover1-1/+2
ip6mr_for_each_table() macro uses list_for_each_entry_rcu() for traversing outside an RCU read side critical section but under the protection of rtnl_mutex. Hence add the corresponding lockdep expression to silence the following false-positive warnings: [ 4.319479] ============================= [ 4.319480] WARNING: suspicious RCU usage [ 4.319482] 5.5.4-stable #17 Tainted: G E [ 4.319483] ----------------------------- [ 4.319485] net/ipv6/ip6mr.c:1243 RCU-list traversed in non-reader section!! [ 4.456831] ============================= [ 4.456832] WARNING: suspicious RCU usage [ 4.456834] 5.5.4-stable #17 Tainted: G E [ 4.456835] ----------------------------- [ 4.456837] net/ipv6/ip6mr.c:1582 RCU-list traversed in non-reader section!! Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: ip6_gre: Distribute switch variables for initializationKees Cook2-7/+14
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. net/ipv6/ip6_gre.c: In function ‘ip6gre_err’: net/ipv6/ip6_gre.c:440:32: warning: statement will never be executed [-Wswitch-unreachable] 440 | struct ipv6_tlv_tnl_enc_lim *tel; | ^~~ net/ipv6/ip6_tunnel.c: In function ‘ip6_tnl_err’: net/ipv6/ip6_tunnel.c:520:32: warning: statement will never be executed [-Wswitch-unreachable] 520 | struct ipv6_tlv_tnl_enc_lim *tel; | ^~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19ESP: Export esp_output_fill_trailer functionRaed Salem1-16/+0
The esp fill trailer method is identical for both IPv6 and IPv4. Share the implementation for esp6 and esp to avoid code duplication in addition it could be also used at various drivers code. Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-02-16ipv6: Fix nlmsg_flags when splitting a multipath routeBenjamin Poirier1-0/+1
When splitting an RTA_MULTIPATH request into multiple routes and adding the second and later components, we must not simply remove NLM_F_REPLACE but instead replace it by NLM_F_CREATE. Otherwise, it may look like the netlink message was malformed. For example, ip route add 2001:db8::1/128 dev dummy0 ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 \ nexthop via fe80::30:2 dev dummy0 results in the following warnings: [ 1035.057019] IPv6: RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE [ 1035.057517] IPv6: NLM_F_CREATE should be set when creating new route This patch makes the nlmsg sequence look equivalent for __ip6_ins_rt() to what it would get if the multipath route had been added in multiple netlink operations: ip route add 2001:db8::1/128 dev dummy0 ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 ip route append 2001:db8::1/128 nexthop via fe80::30:2 dev dummy0 Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16ipv6: Fix route replacement with dev-only routeBenjamin Poirier1-3/+4
After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no longer possible to replace an ECMP-able route by a non ECMP-able route. For example, ip route add 2001:db8::1/128 via fe80::1 dev dummy0 ip route replace 2001:db8::1/128 dev dummy0 does not work as expected. Tweak the replacement logic so that point 3 in the log of the above commit becomes: 3. If the new route is not ECMP-able, and no matching non-ECMP-able route exists, replace matching ECMP-able route (if any) or add the new route. We can now summarize the entire replace semantics to: When doing a replace, prefer replacing a matching route of the same "ECMP-able-ness" as the replace argument. If there is no such candidate, fallback to the first route found. Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net, ip6_tunnel: enhance tunnel locate with link checkWilliam Dauchy1-21/+47
With ipip, it is possible to create an extra interface explicitly attached to a given physical interface: # ip link show tunl0 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 # ip link add tunl1 type ipip dev eth0 # ip link show tunl1 6: tunl1@eth0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 But it is not possible with ip6tnl: # ip link show ip6tnl0 5: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: # ip link add ip6tnl1 type ip6tnl dev eth0 RTNETLINK answers: File exists This patch aims to make it possible by adding link comparaison in both tunnel locate and lookup functions; we also modify mtu calculation when attached to an interface with a lower mtu. This permits to make use of x-netns communication by moving the newly created tunnel in a given netns. Signed-off-by: William Dauchy <w.dauchy@criteo.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13icmp: introduce helper for nat'd source address in network device contextJason A. Donenfeld1-0/+34
This introduces a helper function to be called only by network drivers that wraps calls to icmp[v6]_send in a conntrack transformation, in case NAT has been used. We don't want to pollute the non-driver path, though, so we introduce this as a helper to be called by places that actually make use of this, as suggested by Florian. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07ipv6/addrconf: fix potential NULL deref in inet6_set_link_af()Eric Dumazet1-0/+3
__in6_dev_get(dev) called from inet6_set_link_af() can return NULL. The needed check has been recently removed, let's add it back. While do_setlink() does call validate_linkmsg() : ... err = validate_linkmsg(dev, tb); /* OK at this point */ ... It is possible that the following call happening before the ->set_link_af() removes IPv6 if MTU is less than 1280 : if (tb[IFLA_MTU]) { err = dev_set_mtu_ext(dev, nla_get_u32(tb[IFLA_MTU]), extack); if (err < 0) goto errout; status |= DO_SETLINK_MODIFIED; } ... if (tb[IFLA_AF_SPEC]) { ... err = af_ops->set_link_af(dev, af); ->inet6_set_link_af() // CRASH because idev is NULL Please note that IPv4 is immune to the bug since inet_set_link_af() does : struct in_device *in_dev = __in_dev_get_rcu(dev); if (!in_dev) return -EAFNOSUPPORT; This problem has been mentioned in commit cf7afbfeb8ce ("rtnl: make link af-specific updates atomic") changelog : This method is not fail proof, while it is currently sufficient to make set_link_af() inerrable and thus 100% atomic, the validation function method will not be able to detect all error scenarios in the future, there will likely always be errors depending on states which are f.e. not protected by rtnl_mutex and thus may change between validation and setting. IPv6: ADDRCONF(NETDEV_CHANGE): lo: link becomes ready general protection fault, probably for non-canonical address 0xdffffc0000000056: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000002b0-0x00000000000002b7] CPU: 0 PID: 9698 Comm: syz-executor712 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:inet6_set_link_af+0x66e/0xae0 net/ipv6/addrconf.c:5733 Code: 38 d0 7f 08 84 c0 0f 85 20 03 00 00 48 8d bb b0 02 00 00 45 0f b6 64 24 04 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 1a 03 00 00 44 89 a3 b0 02 00 RSP: 0018:ffffc90005b06d40 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff86df39a6 RDX: 0000000000000056 RSI: ffffffff86df3e74 RDI: 00000000000002b0 RBP: ffffc90005b06e70 R08: ffff8880a2ac0380 R09: ffffc90005b06db0 R10: fffff52000b60dbe R11: ffffc90005b06df7 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8880a1fcc424 R15: dffffc0000000000 FS: 0000000000c46880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f0494ca0d0 CR3: 000000009e4ac000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_setlink+0x2a9f/0x3720 net/core/rtnetlink.c:2754 rtnl_group_changelink net/core/rtnetlink.c:3103 [inline] __rtnl_newlink+0xdd1/0x1790 net/core/rtnetlink.c:3257 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3377 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5438 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5456 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __do_sys_sendmsg net/socket.c:2439 [inline] __se_sys_sendmsg net/socket.c:2437 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4402e9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffd62fbcf8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004402e9 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000008 R09: 00000000004002c8 R10: 0000000000000005 R11: 0000000000000246 R12: 0000000000401b70 R13: 0000000000401c00 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace cfa7664b8fdcdff3 ]--- RIP: 0010:inet6_set_link_af+0x66e/0xae0 net/ipv6/addrconf.c:5733 Code: 38 d0 7f 08 84 c0 0f 85 20 03 00 00 48 8d bb b0 02 00 00 45 0f b6 64 24 04 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 1a 03 00 00 44 89 a3 b0 02 00 RSP: 0018:ffffc90005b06d40 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff86df39a6 RDX: 0000000000000056 RSI: ffffffff86df3e74 RDI: 00000000000002b0 RBP: ffffc90005b06e70 R08: ffff8880a2ac0380 R09: ffffc90005b06db0 R10: fffff52000b60dbe R11: ffffc90005b06df7 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8880a1fcc424 R15: dffffc0000000000 FS: 0000000000c46880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000004 CR3: 000000009e4ac000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 7dc2bccab0ee ("Validate required parameters in inet6_validate_link_af") Signed-off-by: Eric Dumazet <edumazet@google.com> Bisected-and-reported-by: syzbot <syzkaller@googlegroups.com> Cc: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-06vti[6]: fix packet tx through bpf_redirect() in XinY casesNicolas Dichtel1-7/+25
I forgot the 4in6/6in4 cases in my previous patch. Let's fix them. Fixes: 95224166a903 ("vti[6]: fix packet tx through bpf_redirect()") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-01-30mptcp: Fix undefined mptcp_handle_ipv6_mapped for modular IPV6Geert Uytterhoeven1-3/+3
If CONFIG_MPTCP=y, CONFIG_MPTCP_IPV6=n, and CONFIG_IPV6=m: ERROR: "mptcp_handle_ipv6_mapped" [net/ipv6/ipv6.ko] undefined! This does not happen if CONFIG_MPTCP_IPV6=y, as CONFIG_MPTCP_IPV6 selects CONFIG_IPV6, and thus forces CONFIG_IPV6 builtin. As exporting a symbol for an empty function would be a bit wasteful, fix this by providing a dummy version of mptcp_handle_ipv6_mapped() for the CONFIG_MPTCP_IPV6=n case. Rename mptcp_handle_ipv6_mapped() to mptcpv6_handle_mapped(), to make it clear this is a pure-IPV6 function, just like mptcpv6_init(). Fixes: cec37a6e41aae7bf ("mptcp: Handle MP_CAPABLE options for outgoing connections") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-29mptcp: handle tcp fallback when using syn cookiesFlorian Westphal1-0/+3
We can't deal with syncookie mode yet, the syncookie rx path will create tcp reqsk, i.e. we get OOB access because we treat tcp reqsk as mptcp reqsk one: TCP: SYN flooding on port 20002. Sending cookies. BUG: KASAN: slab-out-of-bounds in subflow_syn_recv_sock+0x451/0x4d0 net/mptcp/subflow.c:191 Read of size 1 at addr ffff8881167bc148 by task syz-executor099/2120 subflow_syn_recv_sock+0x451/0x4d0 net/mptcp/subflow.c:191 tcp_get_cookie_sock+0xcf/0x520 net/ipv4/syncookies.c:209 cookie_v6_check+0x15a5/0x1e90 net/ipv6/syncookies.c:252 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1123 [inline] [..] Bug can be reproduced via "sysctl net.ipv4.tcp_syncookies=2". Note that MPTCP should work with syncookies (4th ack would carry needed state), but it appears better to sort that out in -next so do tcp fallback for now. I removed the MPTCP ifdef for tcp_rsk "is_mptcp" member because if (IS_ENABLED()) is easier to read than "#ifdef IS_ENABLED()/#endif" pair. Cc: Eric Dumazet <edumazet@google.com> Fixes: cec37a6e41aae7bf ("mptcp: Handle MP_CAPABLE options for outgoing connections") Reported-by: Christoph Paasch <cpaasch@apple.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27udp: Support UDP fraglist GRO/GSO.Steffen Klassert1-2/+25
This patch extends UDP GRO to support fraglist GRO/GSO by using the previously introduced infrastructure. If the feature is enabled, all UDP packets are going to fraglist GRO (local input and forward). After validating the csum, we mark ip_summed as CHECKSUM_UNNECESSARY for fraglist GRO packets to make sure that the csum is not touched. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller6-14/+19
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Handle MP_CAPABLE options for outgoing connectionsPeter Krystad1-0/+6
Add hooks to tcp_output.c to add MP_CAPABLE to an outgoing SYN request, to capture the MP_CAPABLE in the received SYN-ACK, to add MP_CAPABLE to the final ACK of the three-way handshake. Use the .sk_rx_dst_set() handler in the subflow proto to capture when the responding SYN-ACK is received and notify the MPTCP connection layer. Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Add MPTCP socket stubsMat Martineau1-0/+7
Implements the infrastructure for MPTCP sockets. MPTCP sockets open one in-kernel TCP socket per subflow. These subflow sockets are only managed by the MPTCP socket that owns them and are not visible from userspace. This commit allows a userspace program to open an MPTCP socket with: sock = socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP); The resulting socket is simply a wrapper around a single regular TCP socket, without any of the MPTCP protocol implemented over the wire. Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24ipv6_route_seq_next should increase position indexVasily Averin1-5/+2
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-22net, ip6_tunnel: fix namespaces moveWilliam Dauchy1-3/+1
in the same manner as commit d0f418516022 ("net, ip_tunnel: fix namespaces move"), fix namespace moving as it was broken since commit 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnel"), but for ipv6 this time; there is no reason to keep it for ip6_tunnel. Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnel") Signed-off-by: William Dauchy <w.dauchy@criteo.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21ipv6: sr: remove SKB_GSO_IPXIP6 on End.D* actionsYuki Taguchi1-1/+3
After LRO/GRO is applied, SRv6 encapsulated packets have SKB_GSO_IPXIP6 feature flag, and this flag must be removed right after decapulation procedure. Currently, SKB_GSO_IPXIP6 flag is not removed on End.D* actions, which creates inconsistent packet state, that is, a normal TCP/IP packets have the SKB_GSO_IPXIP6 flag. This behavior can cause unexpected fallback to GSO on routing to netdevices that do not support SKB_GSO_IPXIP6. For example, on inter-VRF forwarding, decapsulated packets separated into small packets by GSO because VRF devices do not support TSO for packets with SKB_GSO_IPXIP6 flag, and this degrades forwarding performance. This patch removes encapsulation related GSO flags from the skb right after the End.D* action is applied. Fixes: d7a669dd2f8b ("ipv6: sr: add helper functions for seg6local") Signed-off-by: Yuki Taguchi <tagyounit@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21Merge branch 'master' of ↵David S. Miller2-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2020-01-21 1) Fix packet tx through bpf_redirect() for xfrm and vti interfaces. From Nicolas Dichtel. 2) Do not confirm neighbor when do pmtu update on a virtual xfrm interface. From Xu Wang. 3) Support output_mark for offload ESP packets, this was forgotten when the output_mark was added initially. From Ulrich Weber. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20net: ip6_gre: fix moving ip6gre between namespacesNiko Kortstrom1-3/+0
Support for moving IPv4 GRE tunnels between namespaces was added in commit b57708add314 ("gre: add x-netns support"). The respective change for IPv6 tunnels, commit 22f08069e8b4 ("ip6gre: add x-netns support") did not drop NETIF_F_NETNS_LOCAL flag so moving them from one netns to another is still denied in IPv6 case. Drop NETIF_F_NETNS_LOCAL flag from ip6gre tunnels to allow moving ip6gre tunnel endpoints between network namespaces. Signed-off-by: Niko Kortstrom <niko.kortstrom@nokia.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15xfrm: support output_mark for offload ESP packetsUlrich Weber1-0/+2
Commit 9b42c1f179a6 ("xfrm: Extend the output_mark") added output_mark support but missed ESP offload support. xfrm_smark_get() is not called within xfrm_input() for packets coming from esp4_gro_receive() or esp6_gro_receive(). Therefore call xfrm_smark_get() directly within these functions. Fixes: 9b42c1f179a6 ("xfrm: Extend the output_mark to support input direction and masking.") Signed-off-by: Ulrich Weber <ulrich.weber@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 15:08:53 +0000