summaryrefslogtreecommitdiffstats
path: root/net/ipv6/seg6_local.c
AgeCommit message (Collapse)AuthorFilesLines
2018-01-09ipv6: use ARRAY_SIZE for array sizing calculation on array seg6_action_tableColin Ian King1-1/+1
Use the ARRAY_SIZE macro on array seg6_action_table to determine size of the array. Improvement suggested by coccinelle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-11ipv6: sr: remove duplicate routing header type checkDavid Lebrun1-4/+0
As seg6_validate_srh() already checks that the Routing Header type is correct, it is not necessary to do it again in get_srh(). Fixes: 5829d70b ("ipv6: sr: fix get_srh() to comply with IPv6 standard "RFC 8200") Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30ipv6: sr: fix get_srh() to comply with IPv6 standard "RFC 8200"Ahmed Abdelsalam1-6/+12
IPv6 packet may carry more than one extension header, and IPv6 nodes must accept and attempt to process extension headers in any order and occurring any number of times in the same packet. Hence, there should be no assumption that Segment Routing extension header is to appear immediately after the IPv6 header. Moreover, section 4.1 of RFC 8200 gives a recommendation on the order of appearance of those extension headers within an IPv6 packet. According to this recommendation, Segment Routing extension header should appear after Hop-by-Hop and Destination Options headers (if they present). This patch fixes the get_srh(), so it gets the segment routing header regardless of its position in the chain of the extension headers in IPv6 packet, and makes sure that the IPv6 routing extension header is of Type 4. Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com> Acked-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25ipv6: sr: implement additional seg6local actionsDavid Lebrun1-0/+147
This patch implements the following seg6local actions. - SEG6_LOCAL_ACTION_END_T: regular SRH processing and forward to the next-hop looked up in the specified routing table. - SEG6_LOCAL_ACTION_END_DX2: decapsulate an L2 frame and forward it to the specified network interface. - SEG6_LOCAL_ACTION_END_DX4: decapsulate an IPv4 packet and forward it, possibly to the specified next-hop. - SEG6_LOCAL_ACTION_END_DT6: decapsulate an IPv6 packet and forward it to the next-hop looked up in the specified routing table. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25ipv6: sr: add helper functions for seg6localDavid Lebrun1-89/+100
This patch adds three helper functions to be used with the seg6local packet processing actions. The decap_and_validate() function will be used by the End.D* actions, that decapsulate an SR-enabled packet. The advance_nextseg() function applies the fundamental operations to update an SRH for the next segment. The lookup_nexthop() function helps select the next-hop for the processed SR packets. It supports an optional next-hop address to route the packet specifically through it, and an optional routing table to use. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25ipv6: sr: enforce IPv6 packets for seg6local lwtDavid Lebrun1-0/+8
This patch ensures that the seg6local lightweight tunnel is used solely with IPv6 routes and processes only IPv6 packets. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25ipv6: sr: add support for ip4ip6 encapsulationDavid Lebrun1-1/+1
This patch enables the SRv6 encapsulation mode to carry an IPv4 payload. All the infrastructure was already present, I just had to add a parameter to seg6_do_srh_encap() to specify the inner packet protocol, and perform some additional checks. Usage example: ip route add 1.2.3.4 encap seg6 mode encap segs fc00::1,fc00::2 dev eth0 Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07ipv6: sr: implement several seg6local actionsDavid Lebrun1-0/+271
This patch implements the following seg6local actions. - SEG6_LOCAL_ACTION_END: regular SRH processing. The DA of the packet is updated to the next segment and forwarded accordingly. - SEG6_LOCAL_ACTION_END_X: same as above, except that the packet is forwarded to the specified IPv6 next-hop. - SEG6_LOCAL_ACTION_END_DX6: decapsulate the packet and forward to inner IPv6 packet to the specified IPv6 next-hop. - SEG6_LOCAL_ACTION_END_B6: insert the specified SRH directly after the IPv6 header of the packet. - SEG6_LOCAL_ACTION_END_B6_ENCAP: encapsulate the packet within an outer IPv6 header, containing the specified SRH. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07ipv6: sr: add rtnetlink functions for seg6local action parametersDavid Lebrun1-18/+193
This patch adds the necessary functions to parse, fill, and compare seg6local rtnetlink attributes, for all defined action parameters. - The SRH parameter defines an SRH to be inserted or encapsulated. - The TABLE parameter defines the table to use for the route lookup of the next segment or the inner decapsulated packet. - The NH4 parameter defines the IPv4 next-hop for an inner decapsulated IPv4 packet. - The NH6 parameter defines the IPv6 next-hop for the next segment or for an inner decapsulated IPv6 packet - The IIF parameter defines an ingress interface index. - The OIF parameter defines an egress interface index. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07ipv6: sr: define core operations for seg6local lightweight tunnelDavid Lebrun1-0/+320
This patch implements a new type of lightweight tunnel named seg6local. A seg6local lwt is defined by a type of action and a set of parameters. The action represents the operation to perform on the packets matching the lwt's route, and is not necessarily an encapsulation. The set of parameters are arguments for the processing function. Each action is defined in a struct seg6_action_desc within seg6_action_table[]. This structure contains the action, mandatory attributes, the processing function, and a static headroom size required by the action. The mandatory attributes are encoded as a bitmask field. The static headroom is set to a non-zero value when the processing function always add a constant number of bytes to the skb (e.g. the header size for encapsulations). To facilitate rtnetlink-related operations such as parsing, fill_encap, and cmp_encap, each type of action parameter is associated to three function pointers, in seg6_action_params[]. All actions defined in seg6_local.h are detailed in [1]. [1] https://tools.ietf.org/html/draft-filsfils-spring-srv6-network-programming-01 Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>