summaryrefslogtreecommitdiffstats
path: root/net/ipv6/ila
AgeCommit message (Collapse)AuthorFilesLines
2016-06-15ila: Fix checksum neutral mappingTom Herbert1-5/+5
The algorithm for checksum neutral mapping is incorrect. This problem was being hidden since we were previously always performing checksum offload on the translated addresses and only with IPv6 HW csum. Enabling an ILA router shows the issue. Corrected algorithm: old_loc is the original locator in the packet, new_loc is the value to overwrite with and is found in the lookup table. old_flag is the old flag value (zero of CSUM_NEUTRAL_FLAG) and new_flag is then (old_flag ^ CSUM_NEUTRAL_FLAG) & CSUM_NEUTRAL_FLAG. Need SUM(new_id + new_flag + diff) == SUM(old_id + old_flag) for checksum neutral translation. Solving for diff gives: diff = (old_id - new_id) + (old_flag - new_flag) compute_csum_diff8(new_id, old_id) gives old_id - new_id If old_flag is set old_flag - new_flag = old_flag = CSUM_NEUTRAL_FLAG Else old_flag - new_flag = -new_flag = ~CSUM_NEUTRAL_FLAG Tested: - Implemented a user space program that creates random addresses and random locators to overwrite. Compares the checksum over the address before and after translation (must always be equal) - Enabled ILA router and showed proper operation. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08ila: Perform only one translation in forwarding pathTom Herbert4-9/+12
When setting up ILA in a router we noticed that the the encapsulation is invoked twice: once in the route input path and again upon route output. To resolve this we add a flag set_csum_neutral for the ila_update_ipv6_locator. If this flag is set and the checksum neutral bit is also set we assume that checksum-neutral translation has already been performed and take no further action. The flag is set only in ila_output path. The flag is not set for ila_input and ila_xlat. Tested: Used 3 netns to set to emulate a router and two hosts. The router translates SIR addresses between the two destinations in other two netns. Verified ping and netperf are functional. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ila: ipv6/ila: fix nlsize calculation for lwtunnelTom Herbert1-2/+4
The handler 'ila_fill_encap_info' adds two attributes: ILA_ATTR_LOCATOR and ILA_ATTR_CSUM_MODE. nla_total_size_64bit() must be use for ILA_ATTR_LOCATOR. Also, do nla_put_u8 instead of nla_put_u64 for ILA_ATTR_CSUM_MODE. Fixes: f13a82d87b21 ("ipv6: use nla_put_u64_64bit()") Fixes: 90bfe662db13 ("ila: add checksum neutral ILA translations") Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+1
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03ipv6/ila: fix nlsize calculation for lwtunnelNicolas Dichtel1-2/+1
The handler 'ila_fill_encap_info' adds one attribute: ILA_ATTR_LOCATOR. Fixes: 65d7ab8de582 ("net: Identifier Locator Addressing module") CC: Tom Herbert <tom@herbertland.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26ila: add checksum neutral ILA translationsTom Herbert4-15/+105
Support checksum neutral ILA as described in the ILA draft. The low order 16 bits of the identifier are used to contain the checksum adjustment value. The csum-mode parameter is added to described checksum processing. There are three values: - adjust transport checksum (previous behavior) - do checksum neutral mapping - do nothing On output the csum-mode in the ila_params is checked and acted on. If mode is checksum neutral mapping then to mapping and set C-bit. On input, C-bit is checked. If it is set checksum-netural mapping is done (regardless of csum-mode in ila params) and C-bit will be cleared. If it is not set then action in csum-mode is taken. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26ila: xlat changesTom Herbert1-69/+34
Change model of xlat to be used only for input where lookup is done on the locator part of an address (comparing to locator_match as key in rhashtable). This is needed for checksum neutral translation which obfuscates the low order 16 bits of the identifier. It also permits hosts to be in muliple ILA domains (each locator can map to a different SIR address). A check is also added to disallow translating non-ILA addresses (check of type in identifier). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26ila: Add struct definitions and helpersTom Herbert4-82/+161
Add structures for identifiers, locators, and an ila address which is composed of a locator and identifier and in6_addr can be cast to it. This includes a three bit type field and enums for the types defined in ILA I-D. In ILA lwt don't allow user to set a translation for a non-ILA address (type of identifier is zero meaning it is an IID). This also requires that the destination prefix is at least 65 bytes (64 bit locator and first byte of identifier). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ipv6: use nla_put_u64_64bit()Nicolas Dichtel2-7/+11
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05rhashtable: accept GFP flags in rhashtable_walk_initBob Copeland1-1/+2
In certain cases, the 802.11 mesh pathtable code wants to iterate over all of the entries in the forwarding table from the receive path, which is inside an RCU read-side critical section. Enable walks inside atomic sections by allowing GFP_ATOMIC allocations for the walker state. Change all existing callsites to pass in GFP_KERNEL. Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Bob Copeland <me@bobcopeland.com> [also adjust gfs2/glock.c and rhashtable tests] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-21ila: autoload moduleRobert Shearman1-0/+1
Avoid users having to manually load the module by adding a module alias allowing it to be autoloaded by the lwt infra. Signed-off-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ila: Add generic ILA translation facilityTom Herbert4-1/+691
This patch implements an ILA tanslation table. This table can be configured with identifier to locator mappings, and can be be queried to resolve a mapping. Queries can be parameterized based on interface, direction (incoming or outoing), and matching locator. The table is implemented using rhashtable and is configured via netlink (through "ip ila .." in iproute). The table may be used as alternative means to do do ILA tanslations other than the lw tunnels Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ila: Create net/ipv6/ila directoryTom Herbert4-0/+300
Create ila directory in preparation for supporting other hooks in the kernel than LWT for doing ILA. This includes: - Moving ila.c to ila/ila_lwt.c - Splitting out some common functions into ila_common.c Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-29 06:19:44 +0000