linux - Linux Kernel (branches are rebased on master from time to time)

Age	Commit message (Collapse)	Author	Files	Lines
2016-06-27	calipso: Add a label cache.	Huw Davies	1	-2/+262
	This works in exactly the same way as the CIPSO label cache. The idea is to allow the lsm to cache the result of a secattr lookup so that it doesn't need to perform the lookup for every skbuff. It introduces two sysctl controls: calipso_cache_enable - enables/disables the cache. calipso_cache_bucket_size - sets the size of a cache bucket. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27	calipso: Add validation of CALIPSO option.	Huw Davies	1	-0/+41
	Lengths, checksum and the DOI are checked. Checking of the level and categories are left for the socket layer. CRC validation is performed in the calipso module to avoid unconditionally linking crc_ccitt() into ipv6. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27	calipso: Allow the lsm to label the skbuff directly.	Huw Davies	1	-0/+165
	In some cases, the lsm needs to add the label to the skbuff directly. A NF_INET_LOCAL_OUT IPv6 hook is added to selinux to match the IPv4 behaviour. This allows selinux to label the skbuffs that it requires. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27	calipso: Allow request sockets to be relabelled by the lsm.	Huw Davies	1	-0/+86
	Request sockets need to have a label that takes into account the incoming connection as well as their parent's label. This is used for the outgoing SYN-ACK and for their child full-socket. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27	calipso: Set the calipso socket label to match the secattr.	Huw Davies	1	-0/+595
	CALIPSO is a hop-by-hop IPv6 option. A lot of this patch is based on the equivalent CISPO code. The main difference is due to manipulating the options in the hop-by-hop header. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27	netlabel: Add support for removing a CALIPSO DOI.	Huw Davies	1	-0/+48
	Remove a specified DOI through the NLBL_CALIPSO_C_REMOVE command. It requires the attribute: NLBL_CALIPSO_A_DOI. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27	netlabel: Add support for enumerating the CALIPSO DOI list.	Huw Davies	1	-0/+41
	Enumerate the DOI list through the NLBL_CALIPSO_C_LISTALL command. It takes no attributes. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27	netlabel: Add support for querying a CALIPSO DOI.	Huw Davies	1	-0/+68
	Query a specified DOI through the NLBL_CALIPSO_C_LIST command. It requires the attribute: NLBL_CALIPSO_A_DOI. The reply will contain: NLBL_CALIPSO_A_MTYPE Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27	netlabel: Initial support for the CALIPSO netlink protocol.	Huw Davies	1	-0/+169
	CALIPSO is a packet labelling protocol for IPv6 which is very similar to CIPSO. It is specified in RFC 5570. Much of the code is based on the current CIPSO code. This adds support for adding passthrough-type CALIPSO DOIs through the NLBL_CALIPSO_C_ADD command. It requires attributes: NLBL_CALIPSO_A_TYPE which must be CALIPSO_MAP_PASS. NLBL_CALIPSO_A_DOI. In passthrough mode the CALIPSO engine will map MLS secattr levels and categories directly to the packet label. At this stage, the major difference between this and the CIPSO code is that IPv6 may be compiled as a module. To allow for this the CALIPSO functions are registered at module init time. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>