summaryrefslogtreecommitdiffstats
path: root/net/ipv6/ah6.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner1-13/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+1
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-03net: use -ENOSPC for transient busy indicationGilad Ben-Yossef1-1/+1
Replace -EBUSY with -ENOSPC when handling transient busy indication in the absence of backlog. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-18ipv6: mark expected switch fall-throughsGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in some cases I placed the "fall through" comment on its own line, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23Merge branch 'master' of ↵David S. Miller1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-06-23 1) Use memdup_user to spmlify xfrm_user_policy. From Geliang Tang. 2) Make xfrm_dev_register static to silence a sparse warning. From Wei Yongjun. 3) Use crypto_memneq to check the ICV in the AH protocol. From Sabrina Dubroca. 4) Remove some unused variables in esp6. From Stephen Hemminger. 5) Extend XFRM MIGRATE to allow to change the UDP encapsulation port. From Antony Antony. 6) Include the UDP encapsulation port to km_migrate announcements. From Antony Antony. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04ipsec: check return value of skb_to_sgvec alwaysJason A. Donenfeld1-2/+6
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19ah: use crypto_memneq to check the ICVSabrina Dubroca1-2/+3
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-16IPsec: do not ignore crypto err in ah6 inputGilad Ben-Yossef1-0/+3
ah6 input processing uses the asynchronous hash crypto API which supplies an error code as part of the operation completion but the error code was being ignored. Treat a crypto API error indication as a verification failure. While a crypto API reported error would almost certainly result in a memcpy of the digest failing anyway and thus the security risk seems minor, performing a memory compare on what might be uninitialized memory is wrong. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-11-04net: inet: Support UID-based routing in IP protocols.Lorenzo Colitti1-2/+3
- Use the UID in routing lookups made by protocol connect() and sendmsg() functions. - Make sure that routing lookups triggered by incoming packets (e.g., Path MTU discovery) take the UID of the socket into account. - For packets not associated with a userspace socket, (e.g., ping replies) use UID 0 inside the user namespace corresponding to the network namespace the socket belongs to. This allows all namespaces to apply routing and iptables rules to kernel-originated traffic in that namespaces by matching UID 0. This is better than using the UID of the kernel socket that is sending the traffic, because the UID of kernel sockets created at namespace creation time (e.g., the per-processor ICMP and TCP sockets) is the UID of the user that created the socket, which might not be mapped in the namespace. Tested: compiles allnoconfig, allyesconfig, allmodconfig Tested: https://android-review.googlesource.com/253302 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25ah6: fix error return codeJulia Lawall1-1/+3
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipv6: coding style: comparison for equality with NULLIan Morris1-1/+1
The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23ipv6: coding style improvements (remove assignment in if statements)Ian Morris1-3/+4
This change has no functional impact and simply addresses some coding style issues detected by checkpatch. Specifically this change adjusts "if" statements which also include the assignment of a variable. No changes to the resultant object files result as determined by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11net: Convert LIMIT_NETDEBUG to net_dbg_ratelimitedJoe Perches1-4/+3
Use the more common dynamic_debug capable net_dbg_ratelimited and remove the LIMIT_NETDEBUG macro. All messages are still ratelimited. Some KERN_<LEVEL> uses are changed to KERN_DEBUG. This may have some negative impact on messages that were emitted at KERN_INFO that are not not enabled at all unless DEBUG is defined or dynamic_debug is enabled. Even so, these messages are now _not_ emitted by default. This also eliminates the use of the net_msg_warn sysctl "/proc/sys/net/core/warnings". For backward compatibility, the sysctl is not removed, but it has no function. The extern declaration of net_msg_warn is removed from sock.h and made static in net/core/sysctl_net_core.c Miscellanea: o Update the sysctl documentation o Remove the embedded uses of pr_fmt o Coalesce format fragments o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-18ipsec: Remove obsolete MAX_AH_AUTH_LENHerbert Xu1-2/+0
While tracking down the MAX_AH_AUTH_LEN crash in an old kernel I thought that this limit was rather arbitrary and we should just get rid of it. In fact it seems that we've already done all the work needed to remove it apart from actually removing it. This limit was there in order to limit stack usage. Since we've already switched over to allocating scratch space using kmalloc, there is no longer any need to limit the authentication length. This patch kills all references to it, including the BUG_ONs that led me here. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-08-24ipv6: White-space cleansing : Structure layoutsIan Morris1-3/+2
This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. This patch addresses structure definitions, specifically it cleanses the brace placement and replaces spaces with tabs in a few places. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-24ipv6: White-space cleansing : Line LayoutsIan Morris1-8/+8
This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. A number of items are addressed in this patch: * Multiple spaces converted to tabs * Spaces before tabs removed. * Spaces in pointer typing cleansed (char *)foo etc. * Remove space after sizeof * Ensure spacing around comparators such as if statements. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14ah6: Use the IPsec protocol multiplexer APISteffen Klassert1-8/+16
Switch ah6 to use the new IPsec protocol multiplexer. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-12{IPv6,xfrm} Add ESN support for AH ingress partFan Du1-6/+24
This patch add esn support for AH input stage by attaching upper 32bits sequence number right after packet payload as specified by RFC 4302. Then the ICV value will guard upper 32bits sequence number as well when packet going in. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-12{IPv6,xfrm} Add ESN support for AH egress partFan Du1-5/+21
This patch add esn support for AH output stage by attaching upper 32bits sequence number right after packet payload as specified by RFC 4302. Then the ICV value will guard upper 32bits sequence number as well when packet going out. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-12-06ipv4/ipv6: Fix FSF address in file headersJeff Kirsher1-2/+1
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> CC: James Morris <jmorris@namei.org> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16ipsec: Don't update the pmtu on ICMPV6_DEST_UNREACHSteffen Klassert1-2/+1
Currently we update the pmtu in the IPsec protocol error handlers if icmpv6 message type is either ICMPV6_DEST_UNREACH or ICMPV6_PKT_TOOBIG. Updating the pmtu on ICMPV6_DEST_UNREACH is wrong in any case, it causes strangely fragmented packets. Only ICMPV6_PKT_TOOBIG signalizes pmtu discovery, so remove the ICMPV6_DEST_UNREACH check in the IPsec protocol error handlers. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-09-05ipv6:introduce function to find route for redirectDuan Jiong1-1/+1
RFC 4861 says that the IP source address of the Redirect is the same as the current first-hop router for the specified ICMP Destination Address, so the gateway should be taken into consideration when we find the route for redirect. There was once a check in commit a6279458c534d01ccc39498aba61c93083ee0372 ("NDISC: Search over all possible rules on receipt of redirect.") and the check went away in commit b94f1c0904da9b8bf031667afc48080ba7c3e8c9 ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect()"). The bug is only "exploitable" on layer-2 because the source address of the redirect is checked to be a valid link-local address but it makes spoofing a lot easier in the same L2 domain nonetheless. Thanks very much for Hannes's help. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15net: Add skb_unclone() helper function.Pravin B Shelar1-2/+1
This function will be used in next GRE_GSO patch. This patch does not change any functionality. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Eric Dumazet <edumazet@google.com>
2013-01-08ah6/esp6: set transport header correctly for IPsec tunnel mode.Li RongQing1-2/+9
IPsec tunnel does not set ECN field to CE in inner header when the ECN field in the outer header is CE, and the ECN field in the inner header is ECT(0) or ECT(1). The cause is ipip6_hdr() does not return the correct address of inner header since skb->transport-header is not the inner header after esp6_input_done2(), or ah6_input(). Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-11-01ipv6: use IS_ENABLED()Amerigo Wang1-5/+5
#if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv6: Add redirect support to all protocol icmp error handlers.David S. Miller1-4/+6
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-15ipv6: Handle PMTU in ICMP error handlers.David S. Miller1-1/+2
One tricky issue on the ipv6 side vs. ipv4 is that the ICMP callouts to handle the error pass the 32-bit info cookie in network byte order whereas ipv4 passes it around in host byte order. Like the ipv4 side, we have two helper functions. One for when we have a socket context and one for when we do not. ip6ip6 tunnels are not handled here, because they handle PMTU events by essentially relaying another ICMP packet-too-big message back to the original sender. This patch allows us to get rid of rt6_do_pmtu_disc(). It handles all kinds of situations that simply cannot happen when we do the PMTU update directly using a fully resolved route. In fact, the "plen == 128" check in ip6_rt_update_pmtu() can very likely be removed or changed into a BUG_ON() check. We should never have a prefixed ipv6 route when we get there. Another piece of strange history here is that TCP and DCCP, unlike in ipv4, never invoke the update_pmtu() method from their ICMP error handlers. This is incredibly astonishing since this is the context where we have the most accurate context in which to make a PMTU update, namely we have a fully connected socket and associated cached socket route. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19ipv6: bool/const conversions phase2Eric Dumazet1-3/+3
Mostly bool conversions, some inline removals and const additions. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-17ipv6: correct the ipv6 option name - Pad0 to Pad1Eldad Zack1-2/+2
The padding destination or hop-by-hop option is called Pad1 and not Pad0. See RFC2460 (4.2) or the IANA ipv6-parameters registry: http://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xml Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net: ipv6: Standardize prefixes for message loggingJoe Perches1-7/+9
Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15net: Convert net_ratelimit uses to net_<level>_ratelimitedJoe Perches1-2/+2
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22net: remove ipv6_addr_copy()Alexey Dobriyan1-6/+6
C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12ah: Don't return NET_XMIT_DROP on input.Nick Bowler1-2/+0
When the ahash driver returns -EBUSY, AH4/6 input functions return NET_XMIT_DROP, presumably copied from the output code path. But returning transmit codes on input doesn't make a lot of sense. Since NET_XMIT_DROP is a positive int, this gets interpreted as the next header type (i.e., success). As that can only end badly, remove the check. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09ah: Read nexthdr value before overwriting it in ahash input callback.Nick Bowler1-2/+2
The AH4/6 ahash input callbacks read out the nexthdr field from the AH header *after* they overwrite that header. This is obviously not going to end well. Fix it up. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09ah: Correctly pass error codes in ahash output callback.Nick Bowler1-2/+0
The AH4/6 ahash output callbacks pass nexthdr to xfrm_output_resume instead of the error code. This appears to be a copy+paste error from the input case, where nexthdr is expected. This causes the driver to continuously add AH headers to the datagram until either an allocation fails and the packet is dropped or the ahash driver hits a synchronous fallback and the resulting monstrosity is transmitted. Correct this issue by simply passing the error code unadulterated. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13xfrm: Use separate low and high order bits of the sequence numbers in ↵Steffen Klassert1-1/+1
xfrm_skb_cb To support IPsec extended sequence numbers, we split the output sequence numbers of xfrm_skb_cb in low and high order 32 bits and we add the high order 32 bits to the input sequence numbers. All users are updated accordingly. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11ah: reload pointers to skb data after calling skb_cow_data()Dang Hongwu1-3/+5
skb_cow_data() may allocate a new data buffer, so pointers on skb should be set after this function. Bug was introduced by commit dff3bb06 ("ah4: convert to ahash") and 8631e9bd ("ah6: convert to ahash"). Signed-off-by: Wang Xuefu <xuefu.wang@6wind.com> Acked-by: Krzysztof Witek <krzysztof.witek@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-22xfrm: SA lookups signature with markJamal Hadi Salim1-1/+1
pass mark to all SA lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25xfrm: Use the user specified truncation length in ESP and AHMartin Willi1-1/+1
Instead of using the hardcoded truncation for authentication algorithms, use the truncation length specified on xfrm_state. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-18ah6: convert to ahashSteffen Klassert1-80/+272
This patch converts ah6 to the new ahash interface. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14net: constify struct inet6_protocolAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23ipv6: Use correct data types for ICMPv6 type and codeBrian Haley1-1/+1
Change all the code that deals directly with ICMPv6 type and code values to use u8 instead of a signed int as that's the actual data type. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25netns xfrm: AH/ESP in netns!Alexey Dobriyan1-1/+2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25netns xfrm: state lookup in netnsAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25ah4/ah6: remove useless NULL assignmentsAlexey Dobriyan1-2/+0
struct will be kfreed in a moment, so... Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29net: replace %p6 with %pI6Harvey Harrison1-1/+1
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28net: replace uses of NIP6_FMT with %p6Harvey Harrison1-2/+2
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-12[IPSEC]: Fix bogus usage of u64 on input sequence numberHerbert Xu1-1/+1
Al Viro spotted a bogus use of u64 on the input sequence number which is big-endian. This patch fixes it by giving the input sequence number its own member in the xfrm_skb_cb structure. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[XFRM]: constify 'struct xfrm_type'Eric Dumazet1-1/+1
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>