summaryrefslogtreecommitdiffstats
path: root/net/ipv6/addrconf.c
AgeCommit message (Collapse)AuthorFilesLines
2019-03-04net: ignore sysctl_devconf_inherit_init_net without SYSCTLArnd Bergmann1-1/+2
When CONFIG_SYSCTL is turned off, we get a link failure for the newly introduced tuning knob. net/ipv6/addrconf.o: In function `addrconf_init_net': addrconf.c:(.text+0x31dc): undefined reference to `sysctl_devconf_inherit_init_net' Add an IS_ENABLED() check to fall back to the default behavior (sysctl_devconf_inherit_init_net=0) here. Fixes: 856c395cfa63 ("net: introduce a knob to control whether to inherit devconf config") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Brauner <christian@brauner.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11net: fix IPv6 prefix route residueZhiqiang Liu1-1/+2
Follow those steps: # ip addr add 2001:123::1/32 dev eth0 # ip addr add 2001:123:456::2/64 dev eth0 # ip addr del 2001:123::1/32 dev eth0 # ip addr del 2001:123:456::2/64 dev eth0 and then prefix route of 2001:123::1/32 will still exist. This is because ipv6_prefix_equal in check_cleanup_prefix_route func does not check whether two IPv6 addresses have the same prefix length. If the prefix of one address starts with another shorter address prefix, even though their prefix lengths are different, the return value of ipv6_prefix_equal is true. Here I add a check of whether two addresses have the same prefix to decide whether their prefixes are equal. Fixes: 5b84efecb7d9 ("ipv6 addrconf: don't cleanup prefix route for IFA_F_NOPREFIXROUTE") Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Reported-by: Wenhao Zhang <zhangwenhao8@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+4
2019-01-22net/ipv6: lower the level of "link is not ready" messagesLubomir Rintel1-2/+2
This message gets logged far too often for how interesting is it. Most distributions nowadays configure NetworkManager to use randomly generated MAC addresses for Wi-Fi network scans. The interfaces end up being periodically brought down for the address change. When they're subsequently brought back up, the message is logged, eventually flooding the log. Perhaps the message is not all that helpful: it seems to be more interesting to hear when the addrconf actually start, not when it does not. Let's lower its level. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-By: Thomas Haller <thaller@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net/ipv6: don't return positive numbers when nothing was dumpedJakub Kicinski1-0/+2
in6_dump_addrs() returns a positive 1 if there was nothing to dump. This return value can not be passed as return from inet6_dump_addr() as is, because it will confuse rtnetlink, resulting in NLMSG_DONE never getting set: $ ip addr list dev lo EOF on netlink Dump terminated v2: flip condition to avoid a new goto (DaveA) Fixes: 7c1e8a3817c5 ("netlink: fixup regression in RTM_GETADDR") Reported-by: Brendan Galloway <brendan.galloway@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: introduce a knob to control whether to inherit devconf configCong Wang1-0/+5
There have been many people complaining about the inconsistent behaviors of IPv4 and IPv6 devconf when creating new network namespaces. Currently, for IPv4, we inherit all current settings from init_net, but for IPv6 we reset all setting to default. This patch introduces a new /proc file /proc/sys/net/core/devconf_inherit_init_net to control the behavior of whether to inhert sysctl current settings from init_net. This file itself is only available in init_net. As demonstrated below: Initial setup in init_net: # cat /proc/sys/net/ipv4/conf/all/rp_filter 2 # cat /proc/sys/net/ipv6/conf/all/accept_dad 1 Default value 0 (current behavior): # ip netns del test # ip netns add test # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter 2 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad 0 Set to 1 (inherit from init_net): # echo 1 > /proc/sys/net/core/devconf_inherit_init_net # ip netns del test # ip netns add test # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter 2 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad 1 Set to 2 (reset to default): # echo 2 > /proc/sys/net/core/devconf_inherit_init_net # ip netns del test # ip netns add test # ip netns exec test cat /proc/sys/net/ipv4/conf/all/rp_filter 0 # ip netns exec test cat /proc/sys/net/ipv6/conf/all/accept_dad 0 Set to a value out of range (invalid): # echo 3 > /proc/sys/net/core/devconf_inherit_init_net -bash: echo: write error: Invalid argument # echo -1 > /proc/sys/net/core/devconf_inherit_init_net -bash: echo: write error: Invalid argument Reported-by: Zhu Yanjun <Yanjun.Zhu@windriver.com> Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19net: ipv6: netconf: perform strict checks also for doit handlersJakub Kicinski1-3/+38
Make RTM_GETNETCONF's doit handler use strict checks when NETLINK_F_STRICT_CHK is set. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19net: ipv6: addr: perform strict checks also for doit handlersJakub Kicinski1-2/+47
Make RTM_GETADDR's doit handler use strict checks when NETLINK_F_STRICT_CHK is set. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04netlink: fixup regression in RTM_GETADDRArthur Gautier1-1/+1
This commit fixes a regression in AF_INET/RTM_GETADDR and AF_INET6/RTM_GETADDR. Before this commit, the kernel would stop dumping addresses once the first skb was full and end the stream with NLMSG_DONE(-EMSGSIZE). The error shouldn't be sent back to netlink_dump so the callback is kept alive. The userspace is expected to call back with a new empty skb. Changes from V1: - The error is not handled in netlink_dump anymore but rather in inet_dump_ifaddr and inet6_dump_addr directly as suggested by David Ahern. Fixes: d7e38611b81e ("net/ipv4: Put target net when address dump fails due to bad attributes") Fixes: 242afaa6968c ("net/ipv6: Put target net when address dump fails due to bad attributes") Cc: David Ahern <dsahern@gmail.com> Cc: "David S . Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Arthur Gautier <baloo@gandi.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30net/ipv6: Fix a test against 'ipv6_find_idev()' return valueChristophe JAILLET1-2/+2
'ipv6_find_idev()' returns NULL on error, not an error pointer. Update the test accordingly and return -ENOBUFS, as already done in 'addrconf_add_dev()', if NULL is returned. Fixes: ("ipv6: allow userspace to add IFA_F_OPTIMISTIC addresses") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06net: core: dev: Add extack argument to dev_open()Petr Machata1-1/+1
In order to pass extack together with NETDEV_PRE_UP notifications, it's necessary to route the extack to __dev_open() from diverse (possibly indirect) callers. One prominent API through which the notification is invoked is dev_open(). Therefore extend dev_open() with and extra extack argument and update all users. Most of the calls end up just encoding NULL, but bond and team drivers have the extack readily available. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net/ipv6: re-do dad when interface has IFF_NOARP flag changeHangbin Liu1-6/+13
When we add a new IPv6 address, we should also join corresponding solicited-node multicast address, unless the interface has IFF_NOARP flag, as function addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do not do dad and add the mcast address. So we will drop corresponding neighbour discovery message that came from other nodes. A typical example is after creating a ipvlan with mode l3, setting up an ipv6 address and changing the mode to l2. Then we will not be able to ping this address as the interface doesn't join related solicited-node mcast address. Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add corresponding mcast group and check if there is a duplicate address on the network. Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-25net/{ipv4,ipv6}: Do not put target net if input nsid is invalidBjørn Mork1-0/+1
The cleanup path will put the target net when netnsid is set. So we must reset netnsid if the input is invalid. Fixes: d7e38611b81e ("net/ipv4: Put target net when address dump fails due to bad attributes") Fixes: 242afaa6968c ("net/ipv6: Put target net when address dump fails due to bad attributes") Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24net/ipv6: Put target net when address dump fails due to bad attributesDavid Ahern1-6/+8
If tgt_net is set based on IFA_TARGET_NETNSID attribute in the dump request, make sure all error paths call put_net. Fixes: 6371a71f3a3b ("net/ipv6: Add support for dumping addresses for a specific device") Fixes: ed6eff11790a ("net/ipv6: Update inet6_dump_addr for strict data checking") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net/ipv6: Add support for dumping addresses for a specific deviceDavid Ahern1-5/+22
If an RTM_GETADDR dump request has ifa_index set in the ifaddrmsg header, then return only the addresses for that device. Since inet6_dump_addr is reused for multicast and anycast addresses, this adds support for device specfic dumps of RTM_GETMULTICAST and RTM_GETANYCAST as well. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net/ipv6: Remove ip_idx arg to in6_dump_addrsDavid Ahern1-10/+6
ip_idx is always 0 going into in6_dump_addrs; it is passed as a pointer to save the last good index into cb. Since cb is already argument to in6_dump_addrs, just save the value there. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+4
David Ahern's dump indexing bug fix in 'net' overlapped the change of the function signature of inet6_fill_ifaddr() in 'net-next'. Trivially resolved. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-20net/ipv6: Fix index counter for unicast addresses in in6_dump_addrsDavid Ahern1-2/+4
The loop wants to skip previously dumped addresses, so loops until current index >= saved index. If the message fills it wants to save the index for the next address to dump - ie., the one that did not fit in the current message. Currently, it is incrementing the index counter before comparing to the saved index, and then the saved index is off by 1 - it assumes the current address is going to fit in the message. Change the index handling to increment only after a succesful dump. Fixes: 502a2ffd7376a ("ipv6: convert idev_list to list macros") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08net: Update netconf dump handlers for strict data checkingDavid Ahern1-3/+19
Update inet_netconf_dump_devconf, inet6_netconf_dump_devconf, and mpls_netconf_dump_devconf for strict data checking. If the flag is set, the dump request is expected to have an netconfmsg struct as the header. The struct only has the family member and no attributes can be appended. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Christian Brauner <christian@brauner.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08rtnetlink: Update inet6_dump_ifinfo for strict data checkingDavid Ahern1-0/+35
Update inet6_dump_ifinfo for strict data checking. If the flag is set, the dump request is expected to have an ifinfomsg struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Christian Brauner <christian@brauner.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08net/ipv6: Update inet6_dump_addr for strict data checkingDavid Ahern1-10/+59
Update inet6_dump_addr for strict data checking. If the flag is set, the dump request is expected to have an ifaddrmsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values suppored by the dump handler are allowed to be non-0 or set in the request. At the moment only the IFA_TARGET_NETNSID attribute is supported. Follow on patches can add support for other fields (e.g., honor ifa_index and only return data for the given device index). Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Christian Brauner <christian@brauner.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08net/ipv6: Refactor address dump to push inet6_fill_args to in6_dump_addrsDavid Ahern1-27/+30
Pull the inet6_fill_args arg up to in6_dump_addrs and move netnsid into it. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Christian Brauner <christian@brauner.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08net: Add extack to nlmsg_parseDavid Ahern1-1/+1
Make sure extack is passed to nlmsg_parse where easy to do so. Most of these are dump handlers and leveraging the extack in the netlink_callback. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Christian Brauner <christian@brauner.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-25Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+1
Version bump conflict in batman-adv, take what's in net-next. iavf conflict, adjustment of netdev_ops in net-next conflicting with poll controller method removal in net. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net/ipv6: Display all addresses in output of /proc/net/if_inet6Jeff Barnhill1-3/+1
The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly handle starting/stopping the iteration. The problem is that at some point during the iteration, an overflow is detected and the process is subsequently stopped. The item being shown via seq_printf() when the overflow occurs is not actually shown, though. When start() is subsequently called to resume iterating, it returns the next item, and thus the item that was being processed when the overflow occurred never gets printed. Alter the meaning of the private data member "offset". Currently, when it is not 0 (which only happens at the very beginning), "offset" represents the next hlist item to be printed. After this change, "offset" always represents the current item. This is also consistent with the private data member "bucket", which represents the current bucket, and also the use of "pos" as defined in seq_file.txt: The pos passed to start() will always be either zero, or the most recent pos used in the previous session. Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19ipv6: Allow the l3mdev to be a loopbackRobert Shearman1-0/+1
There is no way currently for an IPv6 client connect using a loopback address in a VRF, whereas for IPv4 the loopback address can be added: $ sudo ip addr add dev vrfred 127.0.0.1/8 $ sudo ip -6 addr add ::1/128 dev vrfred RTNETLINK answers: Cannot assign requested address So allow ::1 to be configured on an L3 master device. In order for this to be usable ip_route_output_flags needs to not consider ::1 to be a link scope address (since oif == l3mdev and so it would be dropped), and ipv6_rcv needs to consider the l3mdev to be a loopback device so that it doesn't drop the packets. Signed-off-by: Robert Shearman <rshearma@vyatta.att-mail.com> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05ipv6: add inet6_fill_argsChristian Brauner1-34/+55
inet6_fill_if{addr,mcaddr, acaddr}() already took 6 arguments which meant the 7th argument would need to be pushed onto the stack on x86. Add a new struct inet6_fill_args which holds common information passed to inet6_fill_if{addr,mcaddr, acaddr}() and shortens the functions to three pointer arguments. Signed-off-by: Christian Brauner <christian@brauner.io> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDRChristian Brauner1-15/+58
- Backwards Compatibility: If userspace wants to determine whether ipv6 RTM_GETADDR requests support the new IFA_TARGET_NETNSID property it should verify that the reply includes the IFA_TARGET_NETNSID property. If it does not userspace should assume that IFA_TARGET_NETNSID is not supported for ipv6 RTM_GETADDR requests on this kernel. - From what I gather from current userspace tools that make use of RTM_GETADDR requests some of them pass down struct ifinfomsg when they should actually pass down struct ifaddrmsg. To not break existing tools that pass down the wrong struct we will do the same as for RTM_GETLINK | NLM_F_DUMP requests and not error out when the nlmsg_parse() fails. - Security: Callers must have CAP_NET_ADMIN in the owning user namespace of the target network namespace. Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-22addrconf: reduce unnecessary atomic allocationsCong Wang1-3/+3
All the 3 callers of addrconf_add_mroute() assert RTNL lock, they don't take any additional lock either, so it is safe to convert it to GFP_KERNEL. Same for sit_add_v4_addrs(). Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
2018-07-23ipv6: use fib6_info_hold_safe() when necessaryWei Wang1-1/+2
In the code path where only rcu read lock is held, e.g. in the route lookup code path, it is not safe to directly call fib6_info_hold() because the fib6_info may already have been deleted but still exists in the rcu grace period. Holding reference to it could cause double free and crash the kernel. This patch adds a new function fib6_info_hold_safe() and replace fib6_info_hold() in all necessary places. Syzbot reported 3 crash traces because of this. One of them is: 8021q: adding VLAN 0 to HW filter on device team0 IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready dst_release: dst:(____ptrval____) refcnt:-1 dst_release: dst:(____ptrval____) refcnt:-2 WARNING: CPU: 1 PID: 4845 at include/net/dst.h:239 dst_hold include/net/dst.h:239 [inline] WARNING: CPU: 1 PID: 4845 at include/net/dst.h:239 ip6_setup_cork+0xd66/0x1830 net/ipv6/ip6_output.c:1204 dst_release: dst:(____ptrval____) refcnt:-1 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 4845 Comm: syz-executor493 Not tainted 4.18.0-rc3+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 panic+0x238/0x4e7 kernel/panic.c:184 dst_release: dst:(____ptrval____) refcnt:-2 dst_release: dst:(____ptrval____) refcnt:-3 __warn.cold.8+0x163/0x1ba kernel/panic.c:536 dst_release: dst:(____ptrval____) refcnt:-4 report_bug+0x252/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x1fc/0x4d0 arch/x86/kernel/traps.c:296 dst_release: dst:(____ptrval____) refcnt:-5 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:316 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992 RIP: 0010:dst_hold include/net/dst.h:239 [inline] RIP: 0010:ip6_setup_cork+0xd66/0x1830 net/ipv6/ip6_output.c:1204 Code: c1 ed 03 89 9d 18 ff ff ff 48 b8 00 00 00 00 00 fc ff df 41 c6 44 05 00 f8 e9 2d 01 00 00 4c 8b a5 c8 fe ff ff e8 1a f6 e6 fa <0f> 0b e9 6a fc ff ff e8 0e f6 e6 fa 48 8b 85 d0 fe ff ff 48 8d 78 RSP: 0018:ffff8801a8fcf178 EFLAGS: 00010293 RAX: ffff8801a8eba5c0 RBX: 0000000000000000 RCX: ffffffff869511e6 RDX: 0000000000000000 RSI: ffffffff869515b6 RDI: 0000000000000005 RBP: ffff8801a8fcf2c8 R08: ffff8801a8eba5c0 R09: ffffed0035ac8338 R10: ffffed0035ac8338 R11: ffff8801ad6419c3 R12: ffff8801a8fcf720 R13: ffff8801a8fcf6a0 R14: ffff8801ad6419c0 R15: ffff8801ad641980 ip6_make_skb+0x2c8/0x600 net/ipv6/ip6_output.c:1768 udpv6_sendmsg+0x2c90/0x35f0 net/ipv6/udp.c:1376 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:641 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:651 ___sys_sendmsg+0x51d/0x930 net/socket.c:2125 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2220 __do_sys_sendmmsg net/socket.c:2249 [inline] __se_sys_sendmmsg net/socket.c:2246 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2246 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446ba9 Code: e8 cc bb 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fb39a469da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000006dcc54 RCX: 0000000000446ba9 RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003 RBP: 00000000006dcc50 R08: 00007fb39a46a700 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 45c828efc7a64843 R13: e6eeb815b9d8a477 R14: 5068caf6f713c6fc R15: 0000000000000001 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: syzbot+902e2a1bcd4f7808cef5@syzkaller.appspotmail.com Reported-by: syzbot+8ae62d67f647abeeceb9@syzkaller.appspotmail.com Reported-by: syzbot+3f08feb14086930677d0@syzkaller.appspotmail.com Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-11net/ipv6: propagate net.ipv6.conf.all.addr_gen_mode to devicesSabrina Dubroca1-0/+12
This aligns the addr_gen_mode sysctl with the expected behavior of the "all" variant. Fixes: d35a00b8e33d ("net/ipv6: allow sysctl to change link-local address generation mode") Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-11net/ipv6: reserve room for IFLA_INET6_ADDR_GEN_MODESabrina Dubroca1-1/+3
inet6_ifla6_size() is called to check how much space is needed by inet6_fill_link_af() and inet6_fill_ifinfo(), both of which include the IFLA_INET6_ADDR_GEN_MODE attribute. Reserve some room for it. Fixes: bc91b0f07ada ("ipv6: addrconf: implement address generation modes") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-11net/ipv6: don't reinitialize ndev->cnf.addr_gen_mode on new inet6_devSabrina Dubroca1-2/+0
The value has already been copied from this netns's devconf_dflt, it shouldn't be reset to the global kernel default. Fixes: d35a00b8e33d ("net/ipv6: allow sysctl to change link-local address generation mode") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-11net/ipv6: fix addrconf_sysctl_addr_gen_modeSabrina Dubroca1-13/+14
addrconf_sysctl_addr_gen_mode() has multiple problems. First, it ignores the errors returned by proc_dointvec(). addrconf_sysctl_addr_gen_mode() calls proc_dointvec() directly, which writes the value to memory, and then checks if it's valid and may return EINVAL. If a bad value is given, the value displayed when reading net.ipv6.conf.foo.addr_gen_mode next time will be invalid. In case the value provided by the user was valid, addrconf_dev_config() won't be called since idev->cnf.addr_gen_mode has already been updated. Fix this in the usual way we deal with values that need to be checked after the proc_do*() helper has returned: define a local ctl_table and storage, call proc_dointvec() on that temporary area, then check and store. addrconf_sysctl_addr_gen_mode() also writes the new value to the global ipv6_devconf_dflt, when we're writing to some netns's default, so that new netns will inherit the value that was set by the change occuring in any netns. That doesn't make any sense, so let's drop this assignment. Finally, since addr_gen_mode is a __u32, switch to proc_douintvec(). Fixes: d35a00b8e33d ("net/ipv6: allow sysctl to change link-local address generation mode") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30net/ipv6: Fix updates to prefix routeDavid Ahern1-3/+6
Sowmini reported that a recent commit broke prefix routes for linklocal addresses. The newly added modify_prefix_route is attempting to add a new prefix route when the ifp priority does not match the route metric however the check needs to account for the default priority. In addition, the route add fails because the route already exists, and then the delete removes the one that exists. Flip the order to do the delete first. Fixes: 8308f3ff1753 ("net/ipv6: Add support for specifying metric of connected routes") Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-11net/ipv6: Ensure cfg is properly initialized in ipv6_create_tempaddrDavid Ahern1-1/+1
Valdis reported a BUG in ipv6_add_addr: [ 1820.832682] BUG: unable to handle kernel NULL pointer dereference at 0000000000000209 [ 1820.832728] RIP: 0010:ipv6_add_addr+0x280/0xd10 [ 1820.832732] Code: 49 8b 1f 0f 84 6a 0a 00 00 48 85 db 0f 84 4e 0a 00 00 48 8b 03 48 8b 53 08 49 89 45 00 49 8b 47 10 49 89 55 08 48 85 c0 74 15 <48> 8b 50 08 48 8b 00 49 89 95 b8 01 00 00 49 89 85 b0 01 00 00 4c [ 1820.832847] RSP: 0018:ffffaa07c2fd7880 EFLAGS: 00010202 [ 1820.832853] RAX: 0000000000000201 RBX: ffffaa07c2fd79b0 RCX: 0000000000000000 [ 1820.832858] RDX: a4cfbfba2cbfa64c RSI: 0000000000000000 RDI: ffffffff8a8e9fa0 [ 1820.832862] RBP: ffffaa07c2fd7920 R08: 000000000000017a R09: ffffffff8a555300 [ 1820.832866] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888d18e71c00 [ 1820.832871] R13: ffff888d0a9b1200 R14: 0000000000000000 R15: ffffaa07c2fd7980 [ 1820.832876] FS: 00007faa51bdb800(0000) GS:ffff888d1d400000(0000) knlGS:0000000000000000 [ 1820.832880] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1820.832885] CR2: 0000000000000209 CR3: 000000021e8f8001 CR4: 00000000001606e0 [ 1820.832888] Call Trace: [ 1820.832898] ? __local_bh_enable_ip+0x119/0x260 [ 1820.832904] ? ipv6_create_tempaddr+0x259/0x5a0 [ 1820.832912] ? __local_bh_enable_ip+0x139/0x260 [ 1820.832921] ipv6_create_tempaddr+0x2da/0x5a0 [ 1820.832926] ? ipv6_create_tempaddr+0x2da/0x5a0 [ 1820.832941] manage_tempaddrs+0x1a5/0x240 [ 1820.832951] inet6_addr_del+0x20b/0x3b0 [ 1820.832959] ? nla_parse+0xce/0x1e0 [ 1820.832968] inet6_rtm_deladdr+0xd9/0x210 [ 1820.832981] rtnetlink_rcv_msg+0x1d4/0x5f0 Looking at the code I found 1 element (peer_pfx) of the newly introduced ifa6_config struct that is not initialized. Use a memset rather than hard coding an init for each struct element. Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Fixes: e6464b8c63619 ("net/ipv6: Convert ipv6_add_addr to struct ifa6_config") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-222/+305
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-05net: ipv6: Generate random IID for addresses on RAWIP devicesSubash Abhinov Kasiviswanathan1-1/+3
RAWIP devices such as rmnet do not have a hardware address and instead require the kernel to generate a random IID for the IPv6 addresses. Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net/ipv6: Add support for specifying metric of connected routesDavid Ahern1-18/+75
Add support for IFA_RT_PRIORITY to ipv6 addresses. If the metric is changed on an existing address then the new route is inserted before removing the old one. Since the metric is one of the route keys, the prefix route can not be atomically replaced. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net/ipv6: Pass ifa6_config struct to inet6_addr_modifyDavid Ahern1-21/+23
Update inet6_addr_modify to take ifa6_config argument versus a parameter list. This is an argument move only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net/ipv6: Pass ifa6_config struct to inet6_addr_addDavid Ahern1-55/+57
Move the creation of struct ifa6_config up to callers of inet6_addr_add. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net/ipv6: Convert ipv6_add_addr to struct ifa6_configDavid Ahern1-59/+75
Move config parameters for adding an ipv6 address to a struct. struct names stem from inet6_rtm_newaddr which is the modern handler for adding an address. Start the conversion to ifa6_config with ipv6_add_addr. This is an argument move only; no functional change intended. Mapping of variable changes: addr --> cfg->pfx peer_addr --> cfg->peer_pfx pfxlen --> cfg->plen flags --> cfg->ifa_flags scope, valid_lft, prefered_lft have the same names within cfg (with corrected spelling). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16proc: introduce proc_create_net{,_data}Christoph Hellwig1-14/+2
Variants of proc_create{,_data} that directly take a struct seq_operations and deal with network namespaces in ->open and ->release. All callers of proc_create + seq_open_net converted over, and seq_{open,release}_net are removed entirely. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-25ipv6: addrconf: don't evaluate keep_addr_on_down twiceIvan Vecera1-13/+10
The addrconf_ifdown() evaluates keep_addr_on_down state twice. There is no need to do it. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Fix gfp_flags arg to addrconf_prefix_routeDavid Ahern1-2/+2
Eric noticed that __ipv6_ifa_notify is called under rcu_read_lock, so the gfp argument to addrconf_prefix_route can not be GFP_KERNEL. While scrubbing other calls I noticed addrconf_addr_gen has one place with GFP_ATOMIC that can be GFP_KERNEL. Fixes: acb54e3cba404 ("net/ipv6: Add gfp_flags to route add functions") Reported-by: syzbot+2add39b05179b31f912f@syzkaller.appspotmail.com Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Remove aca_idevDavid Ahern1-1/+2
aca_idev has only 1 user - inet6_fill_ifacaddr - and it only wants the device index which can be extracted from the fib6_info nexthop. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Rename addrconf_dst_allocDavid Ahern1-14/+14
addrconf_dst_alloc now returns a fib6_info. Update the name and its users to reflect the change. Rename only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Rename fib6_info struct elementsDavid Ahern1-12/+12
Change the prefix for fib6_info struct elements from rt6i_ to fib6_. rt6i_pcpu and rt6i_exception_bucket are left as is given that they point to rt6_info entries. Rename only; not functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 15:08:38 +0000