summaryrefslogtreecommitdiffstats
path: root/net/ipv4
AgeCommit message (Collapse)AuthorFilesLines
2016-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller7-9/+20
Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: ipv4: Remove l3mdev_get_saddrDavid Ahern2-12/+0
No longer needed Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: l3mdev: remove redundant callsDavid Ahern3-13/+4
A previous patch added l3mdev flow update making these hooks redundant. Remove them. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: vrf: Flip IPv4 output path from FIB lookup hook to out hookDavid Ahern1-4/+0
Flip the IPv4 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv4 output processing to send the packet to the VRF driver on xmit. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: l3mdev: Allow the l3mdev to be a loopbackDavid Ahern1-2/+6
Allow an L3 master device to act as the loopback for that L3 domain. For IPv4 the device can also have the address 127.0.0.1. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: l3mdev: Add hook to output pathDavid Ahern1-0/+8
This patch adds the infrastructure to the output path to pass an skb to an l3mdev device if it has a hook registered. This is the Tx parallel to l3mdev_ip{6}_rcv in the receive path and is the basis for removing the existing hook that returns the vrf dst on the fib lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: flow: Add l3mdev flow updateDavid Ahern1-0/+3
Add l3mdev hook to set FLOWI_FLAG_SKIP_NH_OIF flag and update oif/iif in flow struct if its oif or iif points to a device enslaved to an L3 Master device. Only 1 needs to be converted to match the l3mdev FIB rule. This moves the flow adjustment for l3mdev to a single point catching all lookups. It is redundant for existing hooks (those are removed in later patches) but is needed for missed lookups such as PMTU updates. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10tcp: better use ooo_last_skb in tcp_data_queue_ofo()Eric Dumazet1-1/+7
Willem noticed that we could avoid an rbtree lookup if the the attempt to coalesce incoming skb to the last skb failed for some reason. Since most ooo additions are at the tail, this is definitely worth adding a test and fast path. Suggested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yaogong Wang <wygivan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10ipv4: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas1-1/+1
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/ip_tunnels: Introduce tunnel_id_to_key32() and key32_to_tunnel_id()Amir Vadai1-21/+2
Add utility functions to convert a 32 bits key into a 64 bits tunnel and vice versa. These functions will be used instead of cloning code in GRE and VXLAN, and in tc act_iptunnel which will be introduced in a following patch in this patchset. Signed-off-by: Amir Vadai <amir@vadai.me> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09ip_tunnel: do not clear l4 hashesEric Dumazet1-1/+1
If skb has a valid l4 hash, there is no point clearing hash and force a further flow dissection when a tunnel encapsulation is added. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09ipv4: fix value of ->nlmsg_flags reported in RTM_NEWROUTE eventsGuillaume Nault1-3/+7
fib_table_insert() inconsistently fills the nlmsg_flags field in its notification messages. Since commit b8f558313506 ("[RTNETLINK]: Fix sending netlink message when replace route."), the netlink message has its nlmsg_flags set to NLM_F_REPLACE if the route replaced a preexisting one. Then commit a2bb6d7d6f42 ("ipv4: include NLM_F_APPEND flag in append route notifications") started setting nlmsg_flags to NLM_F_APPEND if the route matched a preexisting one but was appended. In other cases (exclusive creation or prepend), nlmsg_flags is 0. This patch sets ->nlmsg_flags in all situations, preserving the semantic of the NLM_F_* bits: * NLM_F_CREATE: a new fib entry has been created for this route. * NLM_F_EXCL: no other fib entry existed for this route. * NLM_F_REPLACE: this route has overwritten a preexisting fib entry. * NLM_F_APPEND: the new fib entry was added after other entries for the same route. As a result, the possible flag combination can now be reported (iproute2's terminology into parentheses): * NLM_F_CREATE | NLM_F_EXCL: route didn't exist, exclusive creation ("add"). * NLM_F_CREATE | NLM_F_APPEND: route did already exist, new route added after preexisting ones ("append"). * NLM_F_CREATE: route did already exist, new route added before preexisting ones ("prepend"). * NLM_F_REPLACE: route did already exist, new route replaced the first preexisting one ("change"). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08ipv4: accept u8 in IP_TOS ancillary dataEric Dumazet1-2/+5
In commit f02db315b8d8 ("ipv4: IP_TOS and IP_TTL can be specified as ancillary data") Francesco added IP_TOS values specified as integer. However, kernel sends to userspace (at recvmsg() time) an IP_TOS value in a single byte, when IP_RECVTOS is set on the socket. It can be very useful to reflect all ancillary options as given by the kernel in a subsequent sendmsg(), instead of aborting the sendmsg() with EINVAL after Francesco patch. So this patch extends IP_TOS ancillary to accept an u8, so that an UDP server can simply reuse same ancillary block without having to mangle it. Jesper can then augment https://github.com/netoptimizer/network-testing/blob/master/src/udp_example02.c to add TOS reflection ;) Fixes: f02db315b8d8 ("ipv4: IP_TOS and IP_TTL can be specified as ancillary data") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Francesco Fusco <ffusco@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08tcp: use an RB tree for ooo receive queueYaogong Wang4-144/+193
Over the years, TCP BDP has increased by several orders of magnitude, and some people are considering to reach the 2 Gbytes limit. Even with current window scale limit of 14, ~1 Gbytes maps to ~740,000 MSS. In presence of packet losses (or reorders), TCP stores incoming packets into an out of order queue, and number of skbs sitting there waiting for the missing packets to be received can be in the 10^5 range. Most packets are appended to the tail of this queue, and when packets can finally be transferred to receive queue, we scan the queue from its head. However, in presence of heavy losses, we might have to find an arbitrary point in this queue, involving a linear scan for every incoming packet, throwing away cpu caches. This patch converts it to a RB tree, to get bounded latencies. Yaogong wrote a preliminary patch about 2 years ago. Eric did the rebase, added ofo_last_skb cache, polishing and tests. Tested with network dropping between 1 and 10 % packets, with good success (about 30 % increase of throughput in stress tests) Next step would be to also use an RB tree for the write queue at sender side ;) Signed-off-by: Yaogong Wang <wygivan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-By: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08tcp: cwnd does not increase in TCP YeAHArtem Germanov1-1/+1
Commit 76174004a0f19785a328f40388e87e982bbf69b9 (tcp: do not slow start when cwnd equals ssthresh ) introduced regression in TCP YeAH. Using 100ms delay 1% loss virtual ethernet link kernel 4.2 shows bandwidth ~500KB/s for single TCP connection and kernel 4.3 and above (including 4.8-rc4) shows bandwidth ~100KB/s. That is caused by stalled cwnd when cwnd equals ssthresh. This patch fixes it by proper increasing cwnd in this case. Signed-off-by: Artem Germanov <agermanov@anchorfree.com> Acked-by: Dmitry Adamushko <d.adamushko@anchorfree.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net: inet: diag: expose the socket mark to privileged processes.Lorenzo Colitti2-20/+39
This adds the capability for a process that has CAP_NET_ADMIN on a socket to see the socket mark in socket dumps. Commit a52e95abf772 ("net: diag: allow socket bytecode filters to match socket marks") recently gave privileged processes the ability to filter socket dumps based on mark. This patch is complementary: it ensures that the mark is also passed to userspace in the socket's netlink attributes. It is useful for tools like ss which display information about sockets. Tested: https://android-review.googlesource.com/270210 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08tcp: fastopen: avoid negative sk_forward_allocEric Dumazet1-0/+1
When DATA and/or FIN are carried in a SYN/ACK message or SYN message, we append an skb in socket receive queue, but we forget to call sk_forced_mem_schedule(). Effect is that the socket has a negative sk->sk_forward_alloc as long as the message is not read by the application. Josh Hunt fixed a similar issue in commit d22e15371811 ("tcp: fix tcp fin memory accounting") Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Josh Hunt <johunt@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08Merge branch 'master' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== ipsec 2016-09-08 1) Fix a crash when xfrm_dump_sa returns an error. From Vegard Nossum. 2) Remove some incorrect WARN() on normal error handling. From Vegard Nossum. 3) Ignore socket policies when rebuilding hash tables, socket policies are not inserted into the hash tables. From Tobias Brunner. 4) Initialize and check tunnel pointers properly before we use it. From Alexey Kodanev. 5) Fix l3mdev oif setting on xfrm dst lookups. From David Ahern. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07net: diag: make udp_diag_destroy work for mapped addresses.Lorenzo Colitti1-2/+2
udp_diag_destroy does look up the IPv4 UDP hashtable for mapped addresses, but it gets the IPv4 address to look up from the beginning of the IPv6 address instead of the end. Tested: https://android-review.googlesource.com/269874 Fixes: 5d77dca82839 ("net: diag: support SOCK_DESTROY for UDP sockets") Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06net: Don't delete routes in different VRFsMark Tomlinson2-3/+8
When deleting an IP address from an interface, there is a clean-up of routes which refer to this local address. However, there was no check to see that the VRF matched. This meant that deletion wasn't confined to the VRF it should have been. To solve this, a new field has been added to fib_info to hold a table id. When removing fib entries corresponding to a local ip address, this table id is also used in the comparison. The table id is populated when the fib_info is created. This was already done in some places, but not in ip_rt_ioctl(). This has now been fixed. Fixes: 021dd3b8a142 ("net: Add routes to the table associated with the device") Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller8-627/+8
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree. Most relevant updates are the removal of per-conntrack timers to use a workqueue/garbage collection approach instead from Florian Westphal, the hash and numgen expression for nf_tables from Laura Garcia, updates on nf_tables hash set to honor the NLM_F_EXCL flag, removal of ip_conntrack sysctl and many other incremental updates on our Netfilter codebase. More specifically, they are: 1) Retrieve only 4 bytes to fetch ports in case of non-linear skb transport area in dccp, sctp, tcp, udp and udplite protocol conntrackers, from Gao Feng. 2) Missing whitespace on error message in physdev match, from Hangbin Liu. 3) Skip redundant IPv4 checksum calculation in nf_dup_ipv4, from Liping Zhang. 4) Add nf_ct_expires() helper function and use it, from Florian Westphal. 5) Replace opencoded nf_ct_kill() call in IPVS conntrack support, also from Florian. 6) Rename nf_tables set implementation to nft_set_{name}.c 7) Introduce the hash expression to allow arbitrary hashing of selector concatenations, from Laura Garcia Liebana. 8) Remove ip_conntrack sysctl backward compatibility code, this code has been around for long time already, and we have two interfaces to do this already: nf_conntrack sysctl and ctnetlink. 9) Use nf_conntrack_get_ht() helper function whenever possible, instead of opencoding fetch of hashtable pointer and size, patch from Liping Zhang. 10) Add quota expression for nf_tables. 11) Add number generator expression for nf_tables, this supports incremental and random generators that can be combined with maps, very useful for load balancing purpose, again from Laura Garcia Liebana. 12) Fix a typo in a debug message in FTP conntrack helper, from Colin Ian King. 13) Introduce a nft_chain_parse_hook() helper function to parse chain hook configuration, this is used by a follow up patch to perform better chain update validation. 14) Add rhashtable_lookup_get_insert_key() to rhashtable and use it from the nft_set_hash implementation to honor the NLM_F_EXCL flag. 15) Missing nulls check in nf_conntrack from nf_conntrack_tuple_taken(), patch from Florian Westphal. 16) Don't use the DYING bit to know if the conntrack event has been already delivered, instead a state variable to track event re-delivery states, also from Florian. 17) Remove the per-conntrack timer, use the workqueue approach that was discussed during the NFWS, from Florian Westphal. 18) Use the netlink conntrack table dump path to kill stale entries, again from Florian. 19) Add a garbage collector to get rid of stale conntracks, from Florian. 20) Reschedule garbage collector if eviction rate is high. 21) Get rid of the __nf_ct_kill_acct() helper. 22) Use ARPHRD_ETHER instead of hardcoded 1 from ARP logger. 23) Make nf_log_set() interface assertive on unsupported families. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01tcp: fastopen: fix rcv_wup initialization for TFO server on SYN/dataNeal Cardwell1-0/+1
Yuchung noticed that on the first TFO server data packet sent after the (TFO) handshake, the server echoed the TCP timestamp value in the SYN/data instead of the timestamp value in the final ACK of the handshake. This problem did not happen on regular opens. The tcp_replace_ts_recent() logic that decides whether to remember an incoming TS value needs tp->rcv_wup to hold the latest receive sequence number that we have ACKed (latest tp->rcv_nxt we have ACKed). This commit fixes this issue by ensuring that a TFO server properly updates tp->rcv_wup to match tp->rcv_nxt at the time it sends a SYN/ACK for the SYN/data. Reported-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01netconf: add a notif when settings are createdNicolas Dichtel1-4/+7
All changes are notified, but the initial state was missing. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01tcp: make nla_policy conststephen hemminger1-1/+1
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01fou: make nla_policy conststephen hemminger1-1/+1
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-30net: lwtunnel: Handle fragmentationRoopa Prabhu2-1/+11
Today mpls iptunnel lwtunnel_output redirect expects the tunnel output function to handle fragmentation. This is ok but can be avoided if we did not do the mpls output redirect too early. ie we could wait until ip fragmentation is done and then call mpls output for each ip fragment. To make this work we will need, 1) the lwtunnel state to carry encap headroom 2) and do the redirect to the encap output handler on the ip fragment (essentially do the output redirect after fragmentation) This patch adds tunnel headroom in lwtstate to make sure we account for tunnel data in mtu calculations during fragmentation and adds new xmit redirect handler to redirect to lwtunnel xmit func after ip fragmentation. This includes IPV6 and some mtu fixes and testing from David Ahern. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-30netfilter: log: Check param to avoid overflow in nf_log_setGao Feng2-4/+2
The nf_log_set is an interface function, so it should do the strict sanity check of parameters. Convert the return value of nf_log_set as int instead of void. When the pf is invalid, return -EOPNOTSUPP. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-30netfilter: log_arp: Use ARPHRD_ETHER instead of literal '1'Gao Feng1-1/+1
There is one macro ARPHRD_ETHER which defines the ethernet proto for ARP, so we could use it instead of the literal number '1'. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller7-17/+26
All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-29tcp: add tcp_add_backlog()Eric Dumazet1-4/+29
When TCP operates in lossy environments (between 1 and 10 % packet losses), many SACK blocks can be exchanged, and I noticed we could drop them on busy senders, if these SACK blocks have to be queued into the socket backlog. While the main cause is the poor performance of RACK/SACK processing, we can try to avoid these drops of valuable information that can lead to spurious timeouts and retransmits. Cause of the drops is the skb->truesize overestimation caused by : - drivers allocating ~2048 (or more) bytes as a fragment to hold an Ethernet frame. - various pskb_may_pull() calls bringing the headers into skb->head might have pulled all the frame content, but skb->truesize could not be lowered, as the stack has no idea of each fragment truesize. The backlog drops are also more visible on bidirectional flows, since their sk_rmem_alloc can be quite big. Let's add some room for the backlog, as only the socket owner can selectively take action to lower memory needs, like collapsing receive queues or partial ofo pruning. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-28tcp: Set read_sock and peek_len proto_opsTom Herbert2-0/+8
In inet_stream_ops we set read_sock to tcp_read_sock and peek_len to tcp_peek_len (which is just a stub function that calls tcp_inq). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-25tcp: md5: add LINUX_MIB_TCPMD5FAILURE counterEric Dumazet2-0/+2
Adds SNMP counter for drops caused by MD5 mismatches. The current syslog might help, but a counter is more precise and helps monitoring. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-25tcp: md5: increment sk_drops on syn_recv stateEric Dumazet1-0/+1
TCP MD5 mismatches do increment sk_drops counter in all states but SYN_RECV. This is very unlikely to happen in the real world, but worth adding to help diagnostics. We increase the parent (listener) sk_drops. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-25netfilter: nft_reject: restrict to INPUT/FORWARD/OUTPUTLiping Zhang1-0/+1
After I add the nft rule "nft add rule filter prerouting reject with tcp reset", kernel panic happened on my system: NULL pointer dereference at ... IP: [<ffffffff81b9db2f>] nf_send_reset+0xaf/0x400 Call Trace: [<ffffffff81b9da80>] ? nf_reject_ip_tcphdr_get+0x160/0x160 [<ffffffffa0928061>] nft_reject_ipv4_eval+0x61/0xb0 [nft_reject_ipv4] [<ffffffffa08e836a>] nft_do_chain+0x1fa/0x890 [nf_tables] [<ffffffffa08e8170>] ? __nft_trace_packet+0x170/0x170 [nf_tables] [<ffffffffa06e0900>] ? nf_ct_invert_tuple+0xb0/0xc0 [nf_conntrack] [<ffffffffa07224d4>] ? nf_nat_setup_info+0x5d4/0x650 [nf_nat] [...] Because in the PREROUTING chain, routing information is not exist, then we will dereference the NULL pointer and oops happen. So we restrict reject expression to INPUT, FORWARD and OUTPUT chain. This is consistent with iptables REJECT target. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-24net: diag: allow socket bytecode filters to match socket marksLorenzo Colitti1-3/+33
This allows a privileged process to filter by socket mark when dumping sockets via INET_DIAG_BY_FAMILY. This is useful on systems that use mark-based routing such as Android. The ability to filter socket marks requires CAP_NET_ADMIN, which is consistent with other privileged operations allowed by the SOCK_DIAG interface such as the ability to destroy sockets and the ability to inspect BPF filters attached to packet sockets. Tested: https://android-review.googlesource.com/261350 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-24net: diag: slightly refactor the inet_diag_bc_audit error checks.Lorenzo Colitti1-11/+17
This simplifies the code a bit and also allows inet_diag_bc_audit to send to userspace an error that isn't EINVAL. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23udp: get rid of sk_prot_clear_portaddr_nulls()Eric Dumazet2-2/+0
Since we no longer use SLAB_DESTROY_BY_RCU for UDP, we do not need sk_prot_clear_portaddr_nulls() helper. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: diag: support SOCK_DESTROY for UDP socketsDavid Ahern2-0/+94
This implements SOCK_DESTROY for UDP sockets similar to what was done for TCP with commit c1e64e298b8ca ("net: diag: Support destroying TCP sockets.") A process with a UDP socket targeted for destroy is awakened and recvmsg fails with ECONNABORTED. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: diag: Fix refcnt leak in error path destroying socketDavid Ahern2-3/+6
inet_diag_find_one_icsk takes a reference to a socket that is not released if sock_diag_destroy returns an error. Fix by changing tcp_diag_destroy to manage the refcnt for all cases and remove the sock_put calls from tcp_abort. Fixes: c1e64e298b8ca ("net: diag: Support destroying TCP sockets") Reported-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23udp: get rid of SLAB_DESTROY_BY_RCU allocationsEric Dumazet2-2/+0
After commit ca065d0cf80f ("udp: no longer use SLAB_DESTROY_BY_RCU") we do not need this special allocation mode anymore, even if it is harmless. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net-tcp: retire TFO_SERVER_WO_SOCKOPT2 configYuchung Cheng1-13/+8
TFO_SERVER_WO_SOCKOPT2 was intended for debugging purposes during Fast Open development. Remove this config option and also update/clean-up the documentation of the Fast Open sysctl. Reported-by: Piotr Jurkiewicz <piotr.jerzy.jurkiewicz@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23tcp: properly scale window in tcp_v[46]_reqsk_send_ack()Eric Dumazet1-1/+7
When sending an ack in SYN_RECV state, we must scale the offered window if wscale option was negotiated and accepted. Tested: Following packetdrill test demonstrates the issue : 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // Establish a connection. +0 < S 0:0(0) win 20000 <mss 1000,sackOK,wscale 7, nop, TS val 100 ecr 0> +0 > S. 0:0(0) ack 1 win 28960 <mss 1460,sackOK, TS val 100 ecr 100, nop, wscale 7> +0 < . 1:11(10) ack 1 win 156 <nop,nop,TS val 99 ecr 100> // check that window is properly scaled ! +0 > . 1:1(0) ack 1 win 226 <nop,nop,TS val 200 ecr 100> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23udp: fix poll() issue with zero sized packetsEric Dumazet1-6/+6
Laura tracked poll() [and friends] regression caused by commit e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") udp_poll() needs to know if there is a valid packet in receive queue, even if its payload length is 0. Change first_packet_length() to return an signed int, and use -1 as the indication of an empty queue. Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-22net: ipconfig: Fix NULL pointer dereference on RARP/BOOTP/DHCP timeoutGeert Uytterhoeven1-1/+1
If no RARP, BOOTP, or DHCP response is received, ic_dev is never set, causing a NULL pointer dereference in ic_close_devs(): Sending DHCP requests ...... timed out! Unable to handle kernel NULL pointer dereference at virtual address 00000004 To fix this, add a check to avoid dereferencing ic_dev if it is still NULL. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 2647cffb2bc6fbed ("net: ipconfig: Support using "delayed" DHCP replies") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-22net: ip_finish_output_gso: Allow fragmenting segments of tunneled skbs if ↵Shmulik Ladkani1-3/+5
their DF is unset In b8247f095e, "net: ip_finish_output_gso: If skb_gso_network_seglen exceeds MTU, allow segmentation for local udp tunneled skbs" gso skbs arriving from an ingress interface that go through UDP tunneling, are allowed to be fragmented if the resulting encapulated segments exceed the dst mtu of the egress interface. This aligned the behavior of gso skbs to non-gso skbs going through udp encapsulation path. However the non-gso vs gso anomaly is present also in the following cases of a GRE tunnel: - ip_gre in collect_md mode, where TUNNEL_DONT_FRAGMENT is not set (e.g. OvS vport-gre with df_default=false) - ip_gre in nopmtudisc mode, where IFLA_GRE_IGNORE_DF is set In both of the above cases, the non-gso skbs get fragmented, whereas the gso skbs (having skb_gso_network_seglen that exceeds dst mtu) get dropped, as they don't go through the segment+fragment code path. Fix: Setting IPSKB_FRAG_SEGS if the tunnel specified IP_DF bit is NOT set. Tunnels that do set IP_DF, will not go to fragmentation of segments. This preserves behavior of ip_gre in (the default) pmtudisc mode. Fixes: b8247f095e ("net: ip_finish_output_gso: If skb_gso_network_seglen exceeds MTU, allow segmentation for local udp tunneled skbs") Reported-by: wenxu <wenxu@ucloud.cn> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Tested-by: wenxu <wenxu@ucloud.cn> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-22xfrm: Only add l3mdev oif to dst lookupsDavid Ahern1-1/+1
Subash reported that commit 42a7b32b73d6 ("xfrm: Add oif to dst lookups") broke a wifi use case that uses fib rules and xfrms. The intent of 42a7b32b73d6 was driven by VRFs with IPsec. As a compromise relax the use of oif in xfrm lookups to L3 master devices only (ie., oif is either an L3 master device or is enslaved to a master device). Fixes: 42a7b32b73d6 ("xfrm: Add oif to dst lookups") Reported-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-08-19net: ipv4: fix sparse error in fib_good_nh()Eric Dumazet1-1/+2
Fixes following sparse errors : net/ipv4/fib_semantics.c:1579:61: warning: incorrect type in argument 2 (different base types) net/ipv4/fib_semantics.c:1579:61: expected unsigned int [unsigned] [usertype] key net/ipv4/fib_semantics.c:1579:61: got restricted __be32 const [usertype] nh_gw Fixes: a6db4494d218c ("net: ipv4: Consider failed nexthops in multipath routes") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19udp: include addrconf.hEric Dumazet1-0/+1
Include ipv4_rcv_saddr_equal() definition to avoid this sparse error : net/ipv4/udp.c:362:5: warning: symbol 'ipv4_rcv_saddr_equal' was not declared. Should it be static? Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19tcp: md5: remove tcp_md5_hash_header()Eric Dumazet1-17/+0
After commit 19689e38eca5 ("tcp: md5: use kmalloc() backed scratch areas") this function is no longer used. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18fib_trie: Fix the description of pos and bitsXunlei Pang1-2/+2
1) Fix one typo: s/tn/tp/ 2) Fix the description about the "u" bits. Signed-off-by: Xunlei Pang <xlpang@redhat.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>