summaryrefslogtreecommitdiffstats
path: root/net/ipv4/tcp_cubic.c
AgeCommit message (Collapse)AuthorFilesLines
2015-09-17tcp_cubic: do not set epoch_start in the futureEric Dumazet1-2/+8
Tracking idle time in bictcp_cwnd_event() is imprecise, as epoch_start is normally set at ACK processing time, not at send time. Doing a proper fix would need to add an additional state variable, and does not seem worth the trouble, given CUBIC bug has been there forever before Jana noticed it. Let's simply not set epoch_start in the future, otherwise bictcp_update() could overflow and CUBIC would again grow cwnd too fast. This was detected thanks to a packetdrill test Neal wrote that was flaky before applying this fix. Fixes: 30927520dbae ("tcp_cubic: better follow cubic curve after idle period") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Cc: Jana Iyengar <jri@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-10tcp_cubic: better follow cubic curve after idle periodEric Dumazet1-0/+16
Jana Iyengar found an interesting issue on CUBIC : The epoch is only updated/reset initially and when experiencing losses. The delta "t" of now - epoch_start can be arbitrary large after app idle as well as the bic_target. Consequentially the slope (inverse of ca->cnt) would be really large, and eventually ca->cnt would be lower-bounded in the end to 2 to have delayed-ACK slow-start behavior. This particularly shows up when slow_start_after_idle is disabled as a dangerous cwnd inflation (1.5 x RTT) after few seconds of idle time. Jana initial fix was to reset epoch_start if app limited, but Neal pointed out it would ask the CUBIC algorithm to recalculate the curve so that we again start growing steeply upward from where cwnd is now (as CUBIC does just after a loss). Ideally we'd want the cwnd growth curve to be the same shape, just shifted later in time by the amount of the idle period. Reported-by: Jana Iyengar <jri@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Sangtae Ha <sangtae.ha@gmail.com> Cc: Lawrence Brakmo <lawrence@brakmo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09tcp: add tcp_in_slow_start helperYuchung Cheng1-2/+2
Add a helper to test the slow start condition in various congestion control modules and other places. This is to prepare a slight improvement in policy as to exactly when to slow start. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11tcp: restore 1.5x per RTT limit to CUBIC cwnd growth in congestion avoidanceNeal Cardwell1-2/+4
Commit 814d488c6126 ("tcp: fix the timid additive increase on stretch ACKs") fixed a bug where tcp_cong_avoid_ai() would either credit a connection with an increase of snd_cwnd_cnt, or increase snd_cwnd, but not both, resulting in cwnd increasing by 1 packet on at most every alternate invocation of tcp_cong_avoid_ai(). Although the commit correctly implemented the CUBIC algorithm, which can increase cwnd by as much as 1 packet per 1 packet ACKed (2x per RTT), in practice that could be too aggressive: in tests on network paths with small buffers, YouTube server retransmission rates nearly doubled. This commit restores CUBIC to a maximum cwnd growth rate of 1 packet per 2 packets ACKed (1.5x per RTT). In YouTube tests this restored retransmit rates to low levels. Testing: This patch has been tested in datacenter netperf transfers and live youtube.com and google.com servers. Fixes: 9cd981dcf174 ("tcp: fix stretch ACK bugs in CUBIC") Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28tcp: fix timing issue in CUBIC slope calculationNeal Cardwell1-0/+8
This patch fixes a bug in CUBIC that causes cwnd to increase slightly too slowly when multiple ACKs arrive in the same jiffy. If cwnd is supposed to increase at a rate of more than once per jiffy, then CUBIC was sometimes too slow. Because the bic_target is calculated for a future point in time, calculated with time in jiffies, the cwnd can increase over the course of the jiffy while the bic_target calculated as the proper CUBIC cwnd at time t=tcp_time_stamp+rtt does not increase, because tcp_time_stamp only increases on jiffy tick boundaries. So since the cnt is set to: ca->cnt = cwnd / (bic_target - cwnd); as cwnd increases but bic_target does not increase due to jiffy granularity, the cnt becomes too large, causing cwnd to increase too slowly. For example: - suppose at the beginning of a jiffy, cwnd=40, bic_target=44 - so CUBIC sets: ca->cnt = cwnd / (bic_target - cwnd) = 40 / (44 - 40) = 40/4 = 10 - suppose we get 10 acks, each for 1 segment, so tcp_cong_avoid_ai() increases cwnd to 41 - so CUBIC sets: ca->cnt = cwnd / (bic_target - cwnd) = 41 / (44 - 41) = 41 / 3 = 13 So now CUBIC will wait for 13 packets to be ACKed before increasing cwnd to 42, insted of 10 as it should. The fix is to avoid adjusting the slope (determined by ca->cnt) multiple times within a jiffy, and instead skip to compute the Reno cwnd, the "TCP friendliness" code path. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28tcp: fix stretch ACK bugs in CUBICNeal Cardwell1-22/+9
Change CUBIC to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). In addition, because we are now precisely accounting for stretch ACKs, including delayed ACKs, we can now remove the delayed ACK tracking and estimation code that tracked recent delayed ACK behavior in ca->delayed_ack. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28tcp: stretch ACK fixes prepNeal Cardwell1-1/+1
LRO, GRO, delayed ACKs, and middleboxes can cause "stretch ACKs" that cover more than the RFC-specified maximum of 2 packets. These stretch ACKs can cause serious performance shortfalls in common congestion control algorithms that were designed and tuned years ago with receiver hosts that were not using LRO or GRO, and were instead politely ACKing every other packet. This patch series fixes Reno and CUBIC to handle stretch ACKs. This patch prepares for the upcoming stretch ACK bug fix patches. It adds an "acked" parameter to tcp_cong_avoid_ai() to allow for future fixes to tcp_cong_avoid_ai() to correctly handle stretch ACKs, and changes all congestion control algorithms to pass in 1 for the ACKed count. It also changes tcp_slow_start() to return the number of packet ACK "credits" that were not processed in slow start mode, and can be processed by the congestion control module in additive increase mode. In future patches we will fix tcp_cong_avoid_ai() to handle stretch ACKs, and fix Reno and CUBIC handling of stretch ACKs in slow start and additive increase mode. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tcp_cubic: refine Hystart delay thresholdEric Dumazet1-1/+1
In commit 2b4636a5f8ca ("tcp_cubic: make the delay threshold of HyStart less sensitive"), HYSTART_DELAY_MIN was changed to 4 ms. The remaining problem is that using delay_min + (delay_min/16) as the threshold is too sensitive. 6.25 % of variation is too small for rtt above 60 ms, which are not uncommon. Lets use 12.5 % instead (delay_min + (delay_min/8)) Tested: 80 ms RTT between peers, FQ/pacing packet scheduler on sender. 10 bulk transfers of 10 seconds : nstat >/dev/null for i in `seq 1 10` do netperf -H remote -- -k THROUGHPUT | grep THROUGHPUT done nstat | grep Hystart With the 6.25 % threshold : THROUGHPUT=20.66 THROUGHPUT=249.38 THROUGHPUT=254.10 THROUGHPUT=14.94 THROUGHPUT=251.92 THROUGHPUT=237.73 THROUGHPUT=19.18 THROUGHPUT=252.89 THROUGHPUT=21.32 THROUGHPUT=15.58 TcpExtTCPHystartTrainDetect 2 0.0 TcpExtTCPHystartTrainCwnd 4756 0.0 TcpExtTCPHystartDelayDetect 5 0.0 TcpExtTCPHystartDelayCwnd 180 0.0 With the 12.5 % threshold THROUGHPUT=251.09 THROUGHPUT=247.46 THROUGHPUT=250.92 THROUGHPUT=248.91 THROUGHPUT=250.88 THROUGHPUT=249.84 THROUGHPUT=250.51 THROUGHPUT=254.15 THROUGHPUT=250.62 THROUGHPUT=250.89 TcpExtTCPHystartTrainDetect 1 0.0 TcpExtTCPHystartTrainCwnd 3175 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tcp_cubic: add SNMP counters to track how effective is HystartEric Dumazet1-9/+22
When deploying FQ pacing, one thing we noticed is that CUBIC Hystart triggers too soon. Having SNMP counters to have an idea of how often the various Hystart methods trigger is useful prior to any modifications. This patch adds SNMP counters tracking, how many time "ack train" or "Delay" based Hystart triggers, and cumulative sum of cwnd at the time Hystart decided to end SS (Slow Start) myhost:~# nstat -a | grep Hystart TcpExtTCPHystartTrainDetect 9 0.0 TcpExtTCPHystartTrainCwnd 20650 0.0 TcpExtTCPHystartDelayDetect 10 0.0 TcpExtTCPHystartDelayCwnd 360 0.0 -> Train detection was triggered 9 times, and average cwnd was 20650/9=2294, Delay detection was triggered 10 times and average cwnd was 36 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01tcp: whitespace fixesstephen hemminger1-8/+10
Fix places where there is space before tab, long lines, and awkward if(){, double spacing etc. Add blank line after declaration/initialization. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-03tcp: remove in_flight parameter from cong_avoid() methodsEric Dumazet1-3/+2
Commit e114a710aa505 ("tcp: fix cwnd limited checking to improve congestion control") obsoleted in_flight parameter from tcp_is_cwnd_limited() and its callers. This patch does the removal as promised. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30tcp_cubic: fix the range of delayed_ackLiu Yu1-1/+1
commit b9f47a3aaeab (tcp_cubic: limit delayed_ack ratio to prevent divide error) try to prevent divide error, but there is still a little chance that delayed_ack can reach zero. In case the param cnt get negative value, then ratio+cnt would overflow and may happen to be zero. As a result, min(ratio, ACK_RATIO_LIMIT) will calculate to be zero. In some old kernels, such as 2.6.32, there is a bug that would pass negative param, which then ultimately leads to this divide error. commit 5b35e1e6e9c (tcp: fix tcp_trim_head() to adjust segment count with skb MSS) fixed the negative param issue. However, it's safe that we fix the range of delayed_ack as well, to make sure we do not hit a divide by zero. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Liu Yu <allanyuliu@tencent.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26tcp: switch rtt estimations to usec resolutionEric Dumazet1-4/+0
Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Larry Brakmo <brakmo@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04tcp: properly handle stretch acks in slow startYuchung Cheng1-2/+3
Slow start now increases cwnd by 1 if an ACK acknowledges some packets, regardless the number of packets. Consequently slow start performance is highly dependent on the degree of the stretch ACKs caused by receiver or network ACK compression mechanisms (e.g., delayed-ACK, GRO, etc). But slow start algorithm is to send twice the amount of packets of packets left so it should process a stretch ACK of degree N as if N ACKs of degree 1, then exits when cwnd exceeds ssthresh. A follow up patch will use the remainder of the N (if greater than 1) to adjust cwnd in the congestion avoidance phase. In addition this patch retires the experimental limited slow start (LSS) feature. LSS has multiple drawbacks but questionable benefit. The fractional cwnd increase in LSS requires a loop in slow start even though it's rarely used. Configuring such an increase step via a global sysctl on different BDPS seems hard. Finally and most importantly the slow start overshoot concern is now better covered by the Hybrid slow start (hystart) enabled by default. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07tcp: cubic: fix bug in bictcp_acked()Eric Dumazet1-1/+1
While investigating about strange increase of retransmit rates on hosts ~24 days after boot, Van found hystart was disabled if ca->epoch_start was 0, as following condition is true when tcp_time_stamp high order bit is set. (s32)(tcp_time_stamp - ca->epoch_start) < HZ Quoting Van : At initialization & after every loss ca->epoch_start is set to zero so I believe that the above line will turn off hystart as soon as the 2^31 bit is set in tcp_time_stamp & hystart will stay off for 24 days. I think we've observed that cubic's restart is too aggressive without hystart so this might account for the higher drop rate we observe. Diagnosed-by: Van Jacobson <vanj@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07tcp: cubic: fix overflow error in bictcp_update()Eric Dumazet1-4/+6
commit 17a6e9f1aa9 ("tcp_cubic: fix clock dependency") added an overflow error in bictcp_update() in following code : /* change the unit from HZ to bictcp_HZ */ t = ((tcp_time_stamp + msecs_to_jiffies(ca->delay_min>>3) - ca->epoch_start) << BICTCP_HZ) / HZ; Because msecs_to_jiffies() being unsigned long, compiler does implicit type promotion. We really want to constrain (tcp_time_stamp - ca->epoch_start) to a signed 32bit value, or else 't' has unexpected high values. This bugs triggers an increase of retransmit rates ~24 days after boot [1], as the high order bit of tcp_time_stamp flips. [1] for hosts with HZ=1000 Big thanks to Van Jacobson for spotting this problem. Diagnosed-by: Van Jacobson <vanj@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-20tcp: fix undo after RTO for CUBICNeal Cardwell1-4/+6
This patch fixes CUBIC so that cwnd reductions made during RTOs can be undone (just as they already can be undone when using the default/Reno behavior). When undoing cwnd reductions, BIC-derived congestion control modules were restoring the cwnd from last_max_cwnd. There were two problems with using last_max_cwnd to restore a cwnd during undo: (a) last_max_cwnd was set to 0 on state transitions into TCP_CA_Loss (by calling the module's reset() functions), so cwnd reductions from RTOs could not be undone. (b) when fast_covergence is enabled (which it is by default) last_max_cwnd does not actually hold the value of snd_cwnd before the loss; instead, it holds a scaled-down version of snd_cwnd. This patch makes the following changes: (1) upon undo, revert snd_cwnd to ca->loss_cwnd, which is already, as the existing comment notes, the "congestion window at last loss" (2) stop forgetting ca->loss_cwnd on TCP_CA_Loss events (3) use ca->last_max_cwnd to check if we're in slow start Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Sangtae Ha <sangtae.ha@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08tcp_cubic: limit delayed_ack ratio to prevent divide errorstephen hemminger1-2/+7
TCP Cubic keeps a metric that estimates the amount of delayed acknowledgements to use in adjusting the window. If an abnormally large number of packets are acknowledged at once, then the update could wrap and reach zero. This kind of ACK could only happen when there was a large window and huge number of ACK's were lost. This patch limits the value of delayed ack ratio. The choice of 32 is just a conservative value since normally it should be range of 1 to 4 packets. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-15Merge branch 'master' of ↵David S. Miller1-11/+34
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-03-14tcp_cubic: fix low utilization of CUBIC with HyStartSangtae Ha1-0/+7
HyStart sets the initial exit point of slow start. Suppose that HyStart exits at 0.5BDP in a BDP network and no history exists. If the BDP of a network is large, CUBIC's initial cwnd growth may be too conservative to utilize the link. CUBIC increases the cwnd 20% per RTT in this case. Signed-off-by: Sangtae Ha <sangtae.ha@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14tcp_cubic: make the delay threshold of HyStart less sensitiveSangtae Ha1-1/+1
Make HyStart less sensitive to abrupt delay variations due to buffer bloat. Signed-off-by: Sangtae Ha <sangtae.ha@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Reported-by: Lucas Nussbaum <lucas.nussbaum@loria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14tcp_cubic: enable high resolution ack time if neededstephen hemminger1-0/+4
This is a refined version of an earlier patch by Lucas Nussbaum. Cubic needs RTT values in milliseconds. If HZ < 1000 then the values will be too coarse. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reported-by: Lucas Nussbaum <lucas.nussbaum@loria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14tcp_cubic: fix clock dependencystephen hemminger1-12/+19
The hystart code was written with assumption that HZ=1000. Replace the use of jiffies with bictcp_clock as a millisecond real time clock. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reported-by: Lucas Nussbaum <lucas.nussbaum@loria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14tcp_cubic: make ack train delta value a parameterstephen hemminger1-1/+4
Make the spacing between ACK's that indicates a train a tuneable value like other hystart values. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14tcp_cubic: fix comparison of jiffiesstephen hemminger1-2/+4
Jiffies wraps around therefore the correct way to compare is to use cast to signed value. Note: cubic is not using full jiffies value on 64 bit arch because using full unsigned long makes struct bictcp grow too large for the available ca_priv area. Includes correction from Sangtae Ha to improve ack train detection. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10tcp: mark tcp_congestion_ops read_mostlyStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02tcp: add helper for AI algorithmIlpo Järvinen1-10/+1
It seems that implementation in yeah was inconsistent to what other did as it would increase cwnd one ack earlier than the others do. Size benefits: bictcp_cong_avoid | -36 tcp_cong_avoid_ai | +52 bictcp_cong_avoid | -34 tcp_scalable_cong_avoid | -36 tcp_veno_cong_avoid | -12 tcp_yeah_cong_avoid | -38 = -104 bytes total Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-02[TCP] CUBIC v2.3Sangtae Ha1-11/+109
Signed-off-by: Sangtae Ha <sha2@ncsu.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-01rename div64_64 to div64_u64Roman Zippel1-2/+2
Rename div64_64 to div64_u64 to make it consistent with the other divide functions, so it clearly includes the type of the divide. Move its definition to math64.h as currently no architecture overrides the generic implementation. They can still override it of course, but the duplicated declarations are avoided. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Avi Kivity <avi@qumranet.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04[TCP]: TCP cubic v2.2Sangtae Ha1-27/+8
We have updated CUBIC to fix some issues with slow increase in large BDP networks. We also improved its convergence speed. The fix is in fact very simple -- the window increase limit of smax during the window probing phase (i.e., convex growth phase) is removed. We found that this does not affect TCP friendliness, but only improves its scalability. We have run some tests in our lab and also over the Internet path from NCSU to Japan. These results can be seen from the following page: http://netsrv.csc.ncsu.edu/wiki/index.php/Intra_protocol_fairness_testing_with_linux-2.6.23.9 http://netsrv.csc.ncsu.edu/wiki/index.php/RTT_fairness_testing_with_linux-2.6.23.9 http://netsrv.csc.ncsu.edu/wiki/index.php/TCP_friendliness_testing_with_linux-2.6.23.9 Signed-off-by: Sangtae Ha <sha2@ncsu.edu> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[TCP]: Cong.ctrl modules: remove unused good_ack from cong_avoidIlpo Järvinen1-2/+1
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[TCP]: Remove num_acked>0 checks from cong.ctrl mods pkts_ackedIlpo Järvinen1-1/+1
There is no need for such check in pkts_acked because the callback is not invoked unless at least one segment got fully ACKed (i.e., the snd_una moved past skb's end_seq) by the cumulative ACK's snd_una advancement. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[TCP]: cubic - eliminate use of receive time stampStephen Hemminger1-28/+18
Remove use of received timestamp option value from RTT calculation in Cubic. A hostile receiver may be returning a larger timestamp option than the original value. This would cause the sender to believe the malevolent receiver had a larger RTT and because Cubic tries to provide some RTT friendliness, the sender would then favor the liar. Instead, use the jiffie resolutionRTT value already computed and passed back after ack. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[TCP]: congestion control API pass RTT in microsecondsStephen Hemminger1-1/+1
This patch changes the API for the callback that is done after an ACK is received. It solves a couple of issues: * Some congestion controls want higher resolution value of RTT (controlled by TCP_CONG_RTT_SAMPLE flag). These don't really want a ktime, but all compute a RTT in microseconds. * Other congestion control could use RTT at jiffies resolution. To keep API consistent the units should be the same for both cases, just the resolution should change. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18[TCP]: remove unused argument to cong_avoid opStephen Hemminger1-1/+1
None of the existing TCP congestion controls use the rtt value pased in the ca_ops->cong_avoid interface. Which is lucky because seq_rtt could have been -1 when handling a duplicate ack. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-13[TCP]: Set initial_ssthresh default to zero in Cubic and BIC.David S. Miller1-1/+1
Because of the current default of 100, Cubic and BIC perform very poorly compared to standard Reno. In the worst case, this change makes Cubic and BIC as aggressive as Reno. So this change should be very safe. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TCP]: Congestion control API update.Stephen Hemminger1-1/+1
Do some simple changes to make congestion control API faster/cleaner. * use ktime_t rather than timeval * merge rtt sampling into existing ack callback this means one indirect call versus two per ack. * use flags bits to store options/settings Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TCP]: cubic update for net-2.6.22Stephen Hemminger1-3/+5
The following update received from Injong updates TCP cubic to the latest version. I am running more complete tests and will have results after 4/1. According to Injong: the new version improves on its scalability, fairness and stability. So in all properties, we confirmed it shows better performance. NCSU results (for 2.6.18 and 2.6.20) available: http://netsrv.csc.ncsu.edu/wiki/index.php/TCP_Testing This version is described in a new Internet draft for CUBIC. http://www.ietf.org/internet-drafts/draft-rhee-tcp-cubic-00.txt Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TCP]: cubic optimizationStephen Hemminger1-11/+39
Use willy's work in optimizing cube root by having table for small values. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TCP] tcp_cubic: faster cube rootStephen Hemminger1-11/+5
The Newton-Raphson method is quadratically convergent so only a small fixed number of steps are necessary. Therefore it is faster to unroll the loop. Since div64_64 is no longer inline it won't cause code explosion. Also fixes a bug that can occur if x^2 was bigger than 32 bits. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[NET]: div64_64 consolidate (rev3)Stephen Hemminger1-23/+0
Here is the current version of the 64 bit divide common code. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-12[TCP]: Use read mostly for CUBIC parameters.Stephen Hemminger1-10/+10
These module parameters should be in the read mostly area to avoid cache pollution. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10[NET] IPV4: Fix whitespace errors.YOSHIFUJI Hideaki1-25/+25
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-25[TCP] cubic: scaling errorStephen Hemminger1-3/+3
Doug Leith observed a discrepancy between the version of CUBIC described in the papers and the version in 2.6.18. A math error related to scaling causes Cubic to grow too slowly. Patch is from "Sangtae Ha" <sha2@ncsu.edu>. I validated that it does fix the problems. See the following to show behavior over 500ms 100 Mbit link. Sender (2.6.19-rc3) --- Bridge (2.6.18-rt7) ------- Receiver (2.6.19-rc3) 1G [netem] 100M http://developer.osdl.org/shemminger/tcp/2.6.19-rc3/cubic-orig.png http://developer.osdl.org/shemminger/tcp/2.6.19-rc3/cubic-fix.png Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[TCP] Congestion control (modulo lp, bic): use BUILD_BUG_ONAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel1-1/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-17[TCP]: Minimum congestion window consolidation.Stephen Hemminger1-6/+0
Many of the TCP congestion methods all just use ssthresh as the minimum congestion window on decrease. Rather than duplicating the code, just have that be the default if that handle in the ops structure is not set. Minor behaviour change to TCP compound. It probably wants to use this (ssthresh) as lower bound, rather than ssthresh/2 because the latter causes undershoot on loss. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03[TCP] cubic: use Newton-RaphsonStephen Hemminger1-54/+39
Replace cube root algorithim with a faster version using Newton-Raphson. Surprisingly, doing the scaled div64_64 is faster than a true 64 bit division on 64 bit CPU's. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03[TCP] cubic: precompute constantsStephen Hemminger1-76/+57
Revised version of patch to pre-compute values for TCP cubic. * d32,d64 replaced with descriptive names * cube_factor replaces srtt[scaled by count] / HZ * ((1 << (10+2*BICTCP_HZ)) / bic_scale) * beta_scale replaces 8*(BICTCP_BETA_SCALE+beta)/3/(BICTCP_BETA_SCALE-beta); Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>