summaryrefslogtreecommitdiffstats
path: root/net/ipv4/ah4.c
AgeCommit message (Collapse)AuthorFilesLines
2019-06-06xfrm: remove type and offload_type map from xfrm_state_afinfoFlorian Westphal1-2/+1
Only a handful of xfrm_types exist, no need to have 512 pointers for them. Reduces size of afinfo struct from 4k to 120 bytes on 64bit platforms. Also, the unregister function doesn't need to return an error, no single caller does anything useful with it. Just place a WARN_ON() where needed instead. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26net-ipv4: remove 2 always zero parameters from ipv4_redirect()Maciej Żenczykowski1-1/+1
(the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26net-ipv4: remove 2 always zero parameters from ipv4_update_pmtu()Maciej Żenczykowski1-1/+1
(the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03net: use -ENOSPC for transient busy indicationGilad Ben-Yossef1-1/+1
Replace -EBUSY with -ENOSPC when handling transient busy indication in the absence of backlog. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-23Merge branch 'master' of ↵David S. Miller1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-06-23 1) Use memdup_user to spmlify xfrm_user_policy. From Geliang Tang. 2) Make xfrm_dev_register static to silence a sparse warning. From Wei Yongjun. 3) Use crypto_memneq to check the ICV in the AH protocol. From Sabrina Dubroca. 4) Remove some unused variables in esp6. From Stephen Hemminger. 5) Extend XFRM MIGRATE to allow to change the UDP encapsulation port. From Antony Antony. 6) Include the UDP encapsulation port to km_migrate announcements. From Antony Antony. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04ipsec: check return value of skb_to_sgvec alwaysJason A. Donenfeld1-2/+6
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19ah: use crypto_memneq to check the ICVSabrina Dubroca1-2/+3
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-16IPsec: do not ignore crypto err in ah4 inputGilad Ben-Yossef1-0/+3
ah4 input processing uses the asynchronous hash crypto API which supplies an error code as part of the operation completion but the error code was being ignored. Treat a crypto API error indication as a verification failure. While a crypto API reported error would almost certainly result in a memcpy of the digest failing anyway and thus the security risk seems minor, performing a memory compare on what might be uninitialized memory is wrong. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-08-25ah4: Fix error return in ah_input().David S. Miller1-1/+3
Noticed by Herbert Xu. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-18ipsec: Remove obsolete MAX_AH_AUTH_LENHerbert Xu1-2/+0
While tracking down the MAX_AH_AUTH_LEN crash in an old kernel I thought that this limit was rather arbitrary and we should just get rid of it. In fact it seems that we've already done all the work needed to remove it apart from actually removing it. This limit was there in order to limit stack usage. Since we've already switched over to allocating scratch space using kmalloc, there is no longer any need to limit the authentication length. This patch kills all references to it, including the BUG_ONs that led me here. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-25ah4: Use the IPsec protocol multiplexer APISteffen Klassert1-9/+16
Switch ah4 to use the new IPsec protocol multiplexer. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-12{IPv4,xfrm} Add ESN support for AH ingress partFan Du1-5/+22
This patch add esn support for AH input stage by attaching upper 32bits sequence number right after packet payload as specified by RFC 4302. Then the ICV value will guard upper 32bits sequence number as well when packet getting in. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-12{IPv4,xfrm} Add ESN support for AH egress partFan Du1-6/+20
This patch add esn support for AH output stage by attaching upper 32bits sequence number right after packet payload as specified by RFC 4302. Then the ICV value will guard upper 32bits sequence number as well when packet going out. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-06-03ipv4: properly refresh rtable entries on pmtu/redirect eventsTimo Teräs1-5/+2
This reverts commit 05ab86c5 (xfrm4: Invalidate all ipv4 routes on IPsec pmtu events). Flushing all cached entries is not needed. Instead, invalidate only the related next hop dsts to recheck for the added next hop exception where needed. This also fixes a subtle race due to bumping generation id's before updating the pmtu. Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15net: Add skb_unclone() helper function.Pravin B Shelar1-2/+1
This function will be used in next GRE_GSO patch. This patch does not change any functionality. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Eric Dumazet <edumazet@google.com>
2013-01-21xfrm4: Invalidate all ipv4 routes on IPsec pmtu eventsSteffen Klassert1-2/+5
On IPsec pmtu events we can't access the transport headers of the original packet, so we can't find the socket that sent the packet. The only chance to notify the socket about the pmtu change is to force a relookup for all routes. This patch implenents this for the IPsec protocols. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-01-08ah4/esp4: set transport header correctly for IPsec tunnel mode.Li RongQing1-2/+9
IPsec tunnel does not set ECN field to CE in inner header when the ECN field in the outer header is CE, and the ECN field in the inner header is ECT(0) or ECT(1). The cause is ipip_hdr() does not return the correct address of inner header since skb->transport-header is not the inner header after esp_input_done2(), or ah_input(). Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-07-11ipv4: Add redirect support to all protocol icmp error handlers.David S. Miller1-5/+13
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14ipv4: Handle PMTU in all ICMP error handlers.David S. Miller1-0/+1
With ip_rt_frag_needed() removed, we have to explicitly update PMTU information in every ICMP error handler. Create two helper functions to facilitate this. 1) ipv4_sk_update_pmtu() This updates the PMTU when we have a socket context to work with. 2) ipv4_update_pmtu() Raw version, used when no socket context is available. For this interface, we essentially just pass in explicit arguments for the flow identity information we would have extracted from the socket. And you'll notice that ipv4_sk_update_pmtu() is simply implemented in terms of ipv4_update_pmtu() Note that __ip_route_output_key() is used, rather than something like ip_route_output_flow() or ip_route_output_key(). This is because we absolutely do not want to end up with a route that does IPSEC encapsulation and the like. Instead, we only want the route that would get us to the node described by the outermost IP header. Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debugJoe Perches1-2/+2
Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15ipv4: fix checkpatch errorsDaniel Baluta1-1/+1
Fix checkpatch errors of the following type: * ERROR: "foo * bar" should be "foo *bar" * ERROR: "(foo*)" should be "(foo *)" Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12net: ipv4: Standardize prefixes for message loggingJoe Perches1-3/+6
Add #define pr_fmt(fmt) as appropriate. Add "IPv4: ", "TCP: ", and "IPsec: " to appropriate files. Standardize on "UDPLite: " for appropriate uses. Some prefixes were previously "UDPLITE: " and "UDP-Lite: ". Add KBUILD_MODNAME ": " to icmp and gre. Remove embedded prefixes as appropriate. Add missing "\n" to pr_info in gre.c. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11net: Convert printks to pr_<level>Joe Perches1-7/+7
Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12ah: Don't return NET_XMIT_DROP on input.Nick Bowler1-2/+0
When the ahash driver returns -EBUSY, AH4/6 input functions return NET_XMIT_DROP, presumably copied from the output code path. But returning transmit codes on input doesn't make a lot of sense. Since NET_XMIT_DROP is a positive int, this gets interpreted as the next header type (i.e., success). As that can only end badly, remove the check. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09ah: Read nexthdr value before overwriting it in ahash input callback.Nick Bowler1-2/+2
The AH4/6 ahash input callbacks read out the nexthdr field from the AH header *after* they overwrite that header. This is obviously not going to end well. Fix it up. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09ah: Correctly pass error codes in ahash output callback.Nick Bowler1-2/+0
The AH4/6 ahash output callbacks pass nexthdr to xfrm_output_resume instead of the error code. This appears to be a copy+paste error from the input case, where nexthdr is expected. This causes the driver to continuously add AH headers to the datagram until either an allocation fails and the packet is dropped or the ahash driver hits a synchronous fallback and the resulting monstrosity is transmitted. Correct this issue by simply passing the error code unadulterated. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22inet: constify ip headers and in6_addrEric Dumazet1-3/+4
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13xfrm: Use separate low and high order bits of the sequence numbers in ↵Steffen Klassert1-1/+1
xfrm_skb_cb To support IPsec extended sequence numbers, we split the output sequence numbers of xfrm_skb_cb in low and high order 32 bits and we add the high order 32 bits to the input sequence numbers. All users are updated accordingly. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08ipsec: allow to align IPv4 AH on 32 bitsNicolas Dichtel1-6/+19
The Linux IPv4 AH stack aligns the AH header on a 64 bit boundary (like in IPv6). This is not RFC compliant (see RFC4302, Section 3.3.3.2.1), it should be aligned on 32 bits. For most of the authentication algorithms, the ICV size is 96 bits. The AH header alignment on 32 or 64 bits gives the same results. However for SHA-256-128 for instance, the wrong 64 bit alignment results in adding useless padding in IPv4 AH, which is forbidden by the RFC. To avoid breaking backward compatibility, we use a new flag (XFRM_STATE_ALIGN4) do change original behavior. Initial patch from Dang Hongwu <hongwu.dang@6wind.com> and Christophe Gouault <christophe.gouault@6wind.com>. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11ah: reload pointers to skb data after calling skb_cow_data()Dang Hongwu1-3/+4
skb_cow_data() may allocate a new data buffer, so pointers on skb should be set after this function. Bug was introduced by commit dff3bb06 ("ah4: convert to ahash") and 8631e9bd ("ah6: convert to ahash"). Signed-off-by: Wang Xuefu <xuefu.wang@6wind.com> Acked-by: Krzysztof Witek <krzysztof.witek@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-22xfrm: SA lookups signature with markJamal Hadi Salim1-1/+1
pass mark to all SA lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25xfrm: Use the user specified truncation length in ESP and AHMartin Willi1-1/+1
Instead of using the hardcoded truncation for authentication algorithms, use the truncation length specified on xfrm_state. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-18ah4: convert to ahashSteffen Klassert1-59/+236
This patch converts ah4 to the new ahash interface. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14net: constify struct net_protocolAlexey Dobriyan1-1/+1
Remove long removed "inet_protocol_base" declaration. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25netns xfrm: AH/ESP in netns!Alexey Dobriyan1-1/+3
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25netns xfrm: state lookup in netnsAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25ah4/ah6: remove useless NULL assignmentsAlexey Dobriyan1-2/+0
struct will be kfreed in a moment, so... Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/ah4.c esp4.c fib_semantics.c inet_connection_sock.c ↵Jianjun Kong1-2/+2
inetpeer.c ip_output.c Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-12[IPSEC]: Fix bogus usage of u64 on input sequence numberHerbert Xu1-1/+1
Al Viro spotted a bogus use of u64 on the input sequence number which is big-endian. This patch fixes it by giving the input sequence number its own member in the xfrm_skb_cb structure. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[XFRM]: constify 'struct xfrm_type'Eric Dumazet1-1/+1
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Move all calls to xfrm_audit_state_icvfail to xfrm_inputHerbert Xu1-3/+1
Let's nip the code duplication in the bud :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[XFRM]: RFC4303 compliant auditingPaul Moore1-1/+3
This patch adds a number of new IPsec audit events to meet the auditing requirements of RFC4303. This includes audit hooks for the following events: * Could not find a valid SA [sections 2.1, 3.4.2] . xfrm_audit_state_notfound() . xfrm_audit_state_notfound_simple() * Sequence number overflow [section 3.3.3] . xfrm_audit_state_replay_overflow() * Replayed packet [section 3.4.3] . xfrm_audit_state_replay() * Integrity check failure [sections 3.4.4.1, 3.4.4.2] . xfrm_audit_state_icvfail() While RFC4304 deals only with ESP most of the changes in this patch apply to IPsec in general, i.e. both AH and ESP. The one case, integrity check failure, where ESP specific code had to be modified the same was done to the AH code for the sake of consistency. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Move state lock into x->type->inputHerbert Xu1-4/+10
This patch releases the lock on the state before calling x->type->input. It also adds the lock to the spots where they're currently needed. Most of those places (all except mip6) are expected to disappear with async crypto. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPSEC]: Move integrity stat collection into xfrm_inputHerbert Xu1-2/+1
Similar to the moving out of the replay processing on the output, this patch moves the integrity stat collectin from x->type->input into xfrm_input. This would eventually allow transforms such as AH/ESP to be lockless. The error value EBADMSG (currently unused in the crypto layer) is used to indicate a failed integrity check. In future this error can be directly returned by the crypto layer once we switch to aead algorithms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-02cleanup asm/scatterlist.h includesAdrian Bunk1-1/+0
Not architecture specific code should not #include <asm/scatterlist.h>. This patch therefore either replaces them with #include <linux/scatterlist.h> or simply removes them if they were unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10[IPSEC]: Move IP protocol setting from transforms into xfrm4_input.cHerbert Xu1-2/+3
This patch makes the IPv4 x->type->input functions return the next protocol instead of setting it directly. This is identical to how we do things in IPv6 and will help us merge common code on the input path. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[IPSEC]: Move IP length/checksum setting out of transformsHerbert Xu1-2/+0
This patch moves the setting of the IP length and checksum fields out of the transforms and into the xfrmX_output functions. This would help future efforts in merging the transforms themselves. It also adds an optimisation to ipcomp due to the fact that the transport offset is guaranteed to be zero. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[IPSEC]: Get rid of ipv6_{auth,esp,comp}_hdrHerbert Xu1-9/+9
This patch removes the duplicate ipv6_{auth,esp,comp}_hdr structures since they're identical to the IPv4 versions. Duplicating them would only create problems for ourselves later when we need to add things like extended sequence numbers. I've also added transport header type conversion headers for these types which are now used by the transforms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>